Skip to content

Elastic constants, wave speeds and loss factors, read from nine tables in eight books. Seven of those books print a steel and they are not the same steel, which is why a key names the table it came from. Three polymers are printed by one book as the expanded form and by another as the solid one under the same bare name, with densities a factor of twelve to twenty-five apart; both are kept, and each row’s own modulus and speed say which it describes.

Italic is a value this library worked out; a dotted underline is a cell that is not a plain number, and what it is reads on the cell; an asterisk is a note the page made about the row. Click a mark to read it, or give the table focus and press Enter to walk the marks with the arrow keys.

MaterialDensity kg/m³Young's modulus GPaShear modulus GPaPoisson ratioLongitudinal speed m/sBar speed m/sPlate speed m/sBulk speed m/sTransverse speed m/sLoss factorFlexural loss factorLongitudinal loss factorIn-situ loss factorThickness × critical frequency m·HzSource
Aircrete/Autoclaved Aerated Concrete (AAC) blocks (solid) connected with mortar or thin joint compound the table prints the speed as 1900 with a typical range of 1600 to 2300 m/s, and the density only as a range400 to 8000.21 9000.012534.1Hopkins (2007) Table A2, PDF pages 635-636 (no printed folio; between folios 607 and 610)
Aluminium2 70062.1123.170.344 7965 1005 9502 930< 0.00112.7Hopkins (2007) Table A2, PDF pages 635-636 (no printed folio; between folios 607 and 610)
Bricks (solid) connected with mortar1 500 to 2 0000.22 7000.0124Hopkins (2007) Table A2, PDF pages 635-636 (no printed folio; between folios 607 and 610)
Calcium-silicate blocks (solid) connected with thin joint compound1 80010.84.50.22 4492 5002 5821 5810.0125.9Hopkins (2007) Table A2, PDF pages 635-636 (no printed folio; between folios 607 and 610)
Chipboard7603.3471.2870.32 0992 2002 4351 3020.0129.5Hopkins (2007) Table A2, PDF pages 635-636 (no printed folio; between folios 607 and 610)
Clinker concrete blocks (solid) connected with mortar1 0303.3841.410.21 8131 8501 9111 1700.0135.1Hopkins (2007) Table A2, PDF pages 635-636 (no printed folio; between folios 607 and 610)
Clinker concrete blocks (solid) connected with mortar1 7207.9923.330.22 1562 2002 2721 3910.0129.5Hopkins (2007) Table A2, PDF pages 635-636 (no printed folio; between folios 607 and 610)
Clinker concrete slabs1 7256.0412.5170.21 8711 9101 9731 2080.0134Hopkins (2007) Table A2, PDF pages 635-636 (no printed folio; between folios 607 and 610)
Concrete, cast in situ2 20030.512.710.23 7233 8003 9252 4030.00517.1Hopkins (2007) Table A2, PDF pages 635-636 (no printed folio; between folios 607 and 610)
Dense aggregate blocks (solid) connected with mortar2 00019.668.1920.23 1353 2003 3052 0240.0120.3Hopkins (2007) Table A2, PDF pages 635-636 (no printed folio; between folios 607 and 610)
Expanded clay blocks (solid) connected with mortar8004.0631.6930.22 2542 3002 3751 4550.00728.2Hopkins (2007) Table A2, PDF pages 635-636 (no printed folio; between folios 607 and 610)
Glass2 50063.7125.690.245 0485 2005 4803 2050.003 to 0.00612.5Hopkins (2007) Table A2, PDF pages 635-636 (no printed folio; between folios 607 and 610)
Lightweight aggregate blocks (solid) connected with mortar1 4006.5052.710.22 1562 2002 2721 3910.0129.5Hopkins (2007) Table A2, PDF pages 635-636 (no printed folio; between folios 607 and 610)
Medium Density Fibreboard (MDF)7604.5321.7430.32 4422 5602 8331 5150.0125.3Hopkins (2007) Table A2, PDF pages 635-636 (no printed folio; between folios 607 and 610)
Mortar1 6009.223.8420.22 4002 4502 5301 5500.01326.5Hopkins (2007) Table A2, PDF pages 635-636 (no printed folio; between folios 607 and 610)
Oriented Strand Board (OSB) usually orthotropic, with 2200 to 3500 m/s depending on the direction; the quoted speed is the effective one5903.5461.3640.32 4522 5702 8441 5200.0125.2Hopkins (2007) Table A2, PDF pages 635-636 (no printed folio; between folios 607 and 610)
Perspex, plexiglass1 2506.2822.4160.32 2422 3502 6011 39027.6Hopkins (2007) Table A2, PDF pages 635-636 (no printed folio; between folios 607 and 610)
Plaster, gypsum based6501.6170.67390.21 5771 6101 6631 0180.01240.3Hopkins (2007) Table A2, PDF pages 635-636 (no printed folio; between folios 607 and 610)
Plasterboard, natural gypsum8601.7370.66830.31 4211 4901 649881.50.014143.5Hopkins (2007) Table A2, PDF pages 635-636 (no printed folio; between folios 607 and 610)
Plasterboard, combination of flue gas gypsum and natural gypsum6802.0270.77970.31 7271 8102 0031 0710.012535.8Hopkins (2007) Table A2, PDF pages 635-636 (no printed folio; between folios 607 and 610)
Plasterboard, gypsum with glass fibre and other additives8002.9411.1310.31 9172 0102 2251 18932.3Hopkins (2007) Table A2, PDF pages 635-636 (no printed folio; between folios 607 and 610)
Plywood (Birch)7109.5773.6830.33 6733 8504 2612 2780.01616.8Hopkins (2007) Table A2, PDF pages 635-636 (no printed folio; between folios 607 and 610)
Sand-cement screed2 00020.288.450.23 1843 2503 3572 0550.0120Hopkins (2007) Table A2, PDF pages 635-636 (no printed folio; between folios 607 and 610)
Steel7 800199.677.990.285 0595 2705 7203 162< 0.000112.3Hopkins (2007) Table A2, PDF pages 635-636 (no printed folio; between folios 607 and 610)
Timber (soft wood) used for joists, studs or battens44010.013.850.34 7705 0005 5342 95813Hopkins (2007) Table A2, PDF pages 635-636 (no printed folio; between folios 607 and 610)
Aluminium2 70072270.345 2005 4916 4073 1000.000003 to 0.00010.000111.81Cremer 3e Table 4.3, PDF page 201 (printed p. 191)
Lead chemically pure11 3001760.431 2501 3592 0707300.05 to 0.30.0247.74Cremer 3e Table 4.3, PDF page 201 (printed p. 191)
Lead antimonial11 3001760.431 2501 3592 0707300.001 to 0.00447.74Cremer 3e Table 4.3, PDF page 201 (printed p. 191)
Iron7 800200770.35 0505 3085 8753 1000.0001 to 0.00040.0002 to 0.000612.22Cremer 3e Table 4.3, PDF page 201 (printed p. 191)
Steel7 800210770.315 1005 4586 1093 1000.00002 to 0.000311.88Cremer 3e Table 4.3, PDF page 201 (printed p. 191)
Gold19 30080280.4232 0002 2473 3041 2000.000328.87Cremer 3e Table 4.3, PDF page 201 (printed p. 191)
Copper polycrystal8 900125460.353 7004 0014 7482 3000.0020.00216.21Cremer 3e Table 4.3, PDF page 201 (printed p. 191)
Copper single crystal8 900125460.353 7004 0014 7482 3000.0002 to 0.000716.21Cremer 3e Table 4.3, PDF page 201 (printed p. 191)
Magnesium1 74043170.295 0005 1945 6913 1000.000112.49Cremer 3e Table 4.3, PDF page 201 (printed p. 191)
Brass8 50095360.333 2003 5424 0692 1000.0002 to 0.001< 0.00118.32Cremer 3e Table 4.3, PDF page 201 (printed p. 191)
Nickel8 900205770.34 8005 0315 5682 900< 0.00112.89Cremer 3e Table 4.3, PDF page 201 (printed p. 191)
Silver10 50080290.372 7002 9713 6711 6000.0004< 0.00321.83Cremer 3e Table 4.3, PDF page 201 (printed p. 191)
Bismuth9 8003.31.30.38580627.37943600.0008103.4Cremer 3e Table 4.3, PDF page 201 (printed p. 191)
Zinc7 13013.150.331 3501 4361 6508500.000345.17Cremer 3e Table 4.3, PDF page 201 (printed p. 191)
Tin7 2804.41.60.39780844.31 0984700.00276.83Cremer 3e Table 4.3, PDF page 201 (printed p. 191)
Concrete2 100 to 2 30025 to 400.0515 to 18.5Mechel (2008) Table 3, PDF pages 544-545 (printed pp. 529-530)
Lean concrete2 000152 73923Mechel (2008) Table 3, PDF pages 544-545 (printed pp. 529-530)
Light concrete800 to 1 4001.5 to 30.01537 to 48Mechel (2008) Table 3, PDF pages 544-545 (printed pp. 529-530)
Porous concrete600 to 7001.4 to 20.0137 to 45Mechel (2008) Table 3, PDF pages 544-545 (printed pp. 529-530)
Cement floor2 200303 69317Mechel (2008) Table 3, PDF pages 544-545 (printed pp. 529-530)
Xylolith floor1 60061 9360.0332.5Mechel (2008) Table 3, PDF pages 544-545 (printed pp. 529-530)
Asphalt floor2 2006 to 150.03 to 0.324 to 42Mechel (2008) Table 3, PDF pages 544-545 (printed pp. 529-530)
Plaster floor1 200204 0820.00615.5 to 16Mechel (2008) Table 3, PDF pages 544-545 (printed pp. 529-530)
Gypsum panel1 000 to 1 2003.5 to 70.00424 to 35Mechel (2008) Table 3, PDF pages 544-545 (printed pp. 529-530)
Plaster board1 0003.21 7890.0331 to 35Mechel (2008) Table 3, PDF pages 544-545 (printed pp. 529-530)
Fibre cement board2 000 to 2 10020 to 300.0116.5 to 20Mechel (2008) Table 3, PDF pages 544-545 (printed pp. 529-530)
Brick wall1 700 to 1 8009 to 250.0416 to 27Mechel (2008) Table 3, PDF pages 544-545 (printed pp. 529-530)
Glass2 50060 to 800.00111 to 13Mechel (2008) Table 3, PDF pages 544-545 (printed pp. 529-530)
Chip board600 to 1 0002 to 50.0323 to 36Mechel (2008) Table 3, PDF pages 544-545 (printed pp. 529-530)
Plywood600 to 8005 to 120.0214 to 34.5Mechel (2008) Table 3, PDF pages 544-545 (printed pp. 529-530)
Oak wood7000.2 to 10.0118 to 32Mechel (2008) Table 3, PDF pages 544-545 (printed pp. 529-530)
Pine wood4800.1 to 0.50.0120 to 32Mechel (2008) Table 3, PDF pages 544-545 (printed pp. 529-530)
Hard board1 0003 to 4.50.01529.5 to 36.5Mechel (2008) Table 3, PDF pages 544-545 (printed pp. 529-530)
Acryl glass1 2005.62 1600.0629Mechel (2008) Table 3, PDF pages 544-545 (printed pp. 529-530)
Polypropylene1 10031 6510.138Mechel (2008) Table 3, PDF pages 544-545 (printed pp. 529-530)
Polyester1 2004.51 9360.1432.5Mechel (2008) Table 3, PDF pages 544-545 (printed pp. 529-530)
PVC, hard1 3002.71 4410.0443.5Mechel (2008) Table 3, PDF pages 544-545 (printed pp. 529-530)
PVC, 30% softener the table prints no modulus and no loss factor, and its Z_m of 1220 is 8.4 times what its own Eq. (11) gives for this row1 25048Mechel (2008) Table 3, PDF pages 544-545 (printed pp. 529-530)
Polyethylene, hard9501.71 3380.0447Mechel (2008) Table 3, PDF pages 544-545 (printed pp. 529-530)
Polyethylene, soft9200.4659.40.195.5Mechel (2008) Table 3, PDF pages 544-545 (printed pp. 529-530)
Polystyrene1 07031 6740.0137.5Mechel (2008) Table 3, PDF pages 544-545 (printed pp. 529-530)
Polystyrene + 30% glass fibre1 45082 34927Mechel (2008) Table 3, PDF pages 544-545 (printed pp. 529-530)
Polyester + glass fibre2 20011.52 2860.0227.5Mechel (2008) Table 3, PDF pages 544-545 (printed pp. 529-530)
Aluminium2 700745 2350.0000712Mechel (2008) Table 3, PDF pages 544-545 (printed pp. 529-530)
Lead11 400181 2570.0248.5Mechel (2008) Table 3, PDF pages 544-545 (printed pp. 529-530)
Copper8 9001253 74817Mechel (2008) Table 3, PDF pages 544-545 (printed pp. 529-530)
Brass8 500963 3610.00118.6Mechel (2008) Table 3, PDF pages 544-545 (printed pp. 529-530)
Steel, cast steel7 8002005 0640.000112.3Mechel (2008) Table 3, PDF pages 544-545 (printed pp. 529-530)
Malleable iron7 5001704 76113.2Mechel (2008) Table 3, PDF pages 544-545 (printed pp. 529-530)
Cast iron with spheroidal graphite7 2501204 0680.0115.4Mechel (2008) Table 3, PDF pages 544-545 (printed pp. 529-530)
Cast iron with lamellar graphite7 2501204 0680.0215.4Mechel (2008) Table 3, PDF pages 544-545 (printed pp. 529-530)
Zinc7 130131 35046.5Mechel (2008) Table 3, PDF pages 544-545 (printed pp. 529-530)
Tin7 2804.4777.481Mechel (2008) Table 3, PDF pages 544-545 (printed pp. 529-530)
Aluminum sheet the page groups this row under metals2 7007025.930.355 1505 4366 4513 0990.00010.0111.93Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Brass the page groups this row under metals8 5009535.190.353 3403 5694 2352 0350.0010.0118.17Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Brass 70%Zn 30%Cu the page groups this row under metals8 60010137.410.353 4803 6584 3422 0860.0010.0117.73Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Carbon brick the page groups this row under metals1 6308.23.8320.072 2402 2482 2551 5330.0010.0128.85Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Carbon nanotubes the page groups this row under metals1 330 to 1 4001 000471.70.0627 0000.0010.01Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Graphite mouldings the page groups this row under metals1 70094.2060.072 3002 3072 3131 5730.0010.0128.12Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Chromium the page groups this row under metals7 200279115.30.216 2406 3676 6054 0020.0010.0110.19Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Copper annealed the page groups this row under metals8 90012847.760.343 7904 0334 7052 3170.0020.0116.08Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Copper rolled the page groups this row under metals8 93012647.010.343 7603 9944 6602 2950.0010.0116.24Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Gold the page groups this row under metals19 3007927.430.442 0202 2533 6421 1920.0010.0128.79Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Iron the page groups this row under metals7 60020076.920.35 1305 3785 9523 1810.00050.0112.06Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Iron white the page groups this row under metals7 70018069.230.34 8305 0685 6102 9990.00050.0112.8Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Iron nodular the page groups this row under metals7 60015057.690.34 4404 6575 1542 7550.00050.0113.93Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Iron wrought the page groups this row under metals7 900195750.34 9705 2085 7643 0810.00050.0112.45Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Iron gray (1) the page groups this row under metals7 0008331.920.33 4403 6103 9952 1360.00050.0217.97Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Iron gray (2) the page groups this row under metals7 200117450.34 0304 2264 6772 5000.00050.0315.35Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Iron malleable the page groups this row under metals7 20018069.230.35 0005 2415 8013 1010.00050.0412.38Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Lead annealed the page groups this row under metals11 400165.5940.431 1801 3121 999700.50.0150.0349.43Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Lead rolled the page groups this row under metals11 40016.75.7990.441 2101 3482 179713.20.0150.0448.12Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Lead sheet the page groups this row under metals11 34013.84.7920.441 1001 2281 9866500.0150.0552.8Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Magnesium the page groups this row under metals1 74044.717.330.295 0305 2965 8023 1560.00010.0112.25Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Molybdenum the page groups this row under metals10 100280106.10.325 2605 5576 2983 2410.00010.0111.67Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Monel metal the page groups this row under metals8 85018067.670.334 5104 7785 4902 7650.00010.0213.58Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Neodymium the page groups this row under metals7 000390148.90.317 4607 8518 7884 6110.00010.038.262Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Nickel the page groups this row under metals8 90020578.240.314 8005 0485 6502 9650.0010.0112.85Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Nickel-iron alloy (Invar) the page groups this row under metals8 00014353.760.334 2304 4795 1462 5920.0010.0114.48Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Platinum the page groups this row under metals21 40016866.140.272 8802 9103 1321 7580.0010.0222.29Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Silver the page groups this row under metals10 50082.730.40.362 7903 0083 6381 7020.0010.0321.56Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Steel mild the page groups this row under metals7 85020779.620.35 1305 3835 9583 1850.00010.0112.05Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Steel 1% carbon the page groups this row under metals7 84021081.40.295 1705 4085 9253 2220.00010.0211.99Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Stainless steel 302 the page groups this row under metals7 91020076.920.35 0305 2715 8343 1180.00010.0112.31Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Stainless steel 316 the page groups this row under metals7 95020076.920.35 0205 2585 8193 1110.00010.0112.34Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Stainless steel 347 the page groups this row under metals7 90019876.150.35 0105 2485 8093 1050.00010.0212.36Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Stainless steel 430 the page groups this row under metals7 71023088.460.35 4605 7266 3373 3870.00010.0311.33Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Tin the page groups this row under metals7 3005420.30.332 7202 8813 3111 6680.00010.0122.51Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Titanium the page groups this row under metals4 50011643.940.325 0805 3596 0733 1250.00010.0212.1Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Tungsten drawn the page groups this row under metals19 300360134.30.344 3204 5925 3582 6380.00010.0314.12Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Tungsten annealed the page groups this row under metals19 300412160.90.284 6204 8135 2242 8880.00010.0413.48Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Tungsten carbide the page groups this row under metals13 800534218.90.226 2206 3776 6473 9820.00010.0510.17Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Zinc sheet the page groups this row under metals7 14096.536.280.333 6803 8944 4752 2540.00030.0116.66Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Brick the page groups this row under building materials; the printed speed is +5 per cent from sqrt(E/rho) on this row's own two columns, which the page says it was calculated from; see docs/ERRATA.md2 0002410.710.123 6503 4893 5222 3150.010.0518.59Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Concrete normal the page groups this row under building materials2 30018 to 300.22 8000.0050.05Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Concrete aerated the page groups this row under building materials; the loss factor column prints one number here where it prints two elsewhere, so only the internal one is held300 to 6001.5 to 20.22 0000.05Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Concrete high strength the page groups this row under building materials2 4003012.50.23 5303 6083 7272 2820.0050.0517.98Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Masonry block the page groups this row under building materials9004.82.1430.122 3102 3262 3481 5430.0050.0527.88Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Cork the page groups this row under building materials; the printed speed is -21 per cent from sqrt(E/rho) on this row's own two columns, which the page says it was calculated from; see docs/ERRATA.md2500.10.043480.15500639.7649.94170.0050.05101.4Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Fibre board the page groups this row under building materials480 to 8803.5 to 70.152 7500.0050.05Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Gypsum board the page groups this row under building materials7602.10.84680.241 6701 7121 8051 0560.0060.0537.88Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Glass the page groups this row under building materials2 5006827.640.235 2905 3595 6153 3250.00060.0212.1Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Glass Pyrex the page groups this row under building materials2 3206225.20.235 1705 3125 5663 2960.00060.0212.21Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Ash black the page groups this row under wood450114.0150.374 9405 3226 5752 9870.040.0512.19Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Ash white the page groups this row under wood600124 4700.040.05Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Aspen quaking the page groups this row under wood3808.12.7180.494 6205 29619 1002 6740.040.0512.25Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Balsa wood the page groups this row under wood1603.41.3820.234 6104 7374 9632 9390.0010.0513.69Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Baltic whitewood the page groups this row under wood400105 0000.040.05Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Baltic redwood the page groups this row under wood48010.14 5900.040.05Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Beech the page groups this row under wood64011.94 3100.040.05Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Birch yellow the page groups this row under wood62013.94.860.434 7405 2457 9892 8000.040.0512.37Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Cedar white-northern the page groups this row under wood3205.52.0520.344 1504 4085 1432 5320.040.0514.71Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Cedar red-western the page groups this row under wood3207.62.7540.384 8705 2696 6682 9330.040.0512.31Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Compressed hardboard composite the page groups this row under wood1 00042 0000.0050.05Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Douglas fir the page groups this row under wood5009.7 to 13.20.294 8000.040.05Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Douglas fir coastal the page groups this row under wood45010.84.1860.294 9005 1195 6083 0500.040.0512.67Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Douglas fir interior the page groups this row under wood43083.1010.294 3104 5074 9382 6850.040.0514.39Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Mahogany African the page groups this row under wood4209.73.7310.34 8105 0385 5762 9800.040.0512.88Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Mahogany Honduras the page groups this row under wood45010.33.9310.314 7805 0325 6332 9560.040.0512.89Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Maple the page groups this row under wood600124.1960.434 4704 9537 5462 6440.040.0513.09Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
MDF the page groups this row under wood7703.72 1900.0050.05Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Meranti light red the page groups this row under wood34010.55 5600.040.05Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Meranti dark red the page groups this row under wood46011.55 0000.040.05Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Oak the page groups this row under wood630124.4440.354 3604 6595 5292 6560.040.0513.92Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Pine radiata the page groups this row under wood42010.24 9300.040.05Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Pine other the page groups this row under wood350 to 5908.2 to 13.74 8300.040.06Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Plywood fir the page groups this row under wood; the printed speed is +22 per cent from sqrt(E/rho) on this row's own two columns, which the page says it was calculated from; see docs/ERRATA.md6008.34 5400.010.05Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Poplar the page groups this row under wood350 to 500104 9000.040.05Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Redwood old the page groups this row under wood3909.63.5290.364 9605 3186 4323 0080.040.0512.2Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Redwood 2nd growth the page groups this row under wood3406.62.4260.364 4104 7235 7122 6710.040.0513.73Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Scots pine the page groups this row under wood50010.14 4900.040.05Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Spruce Sitka the page groups this row under wood4009.63.5040.374 9005 2736 5152 9600.040.0512.3Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Spruce Engelmann the page groups this row under wood3508.93.1340.425 0405 5578 0572 9920.040.0511.67Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Teak the page groups this row under wood55014.65 1500.020.05Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Walnut black the page groups this row under wood55011.63.8930.494 5905 26819 0002 6600.040.0512.31Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Wood chipboard floor the page groups this row under wood7002.81 9800.0050.05Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Wood chipboard std the page groups this row under wood6252.11 8300.0050.05Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Lucite the page groups this row under plastics and other1 20041.4810.351 8301 9492 3131 1110.0020.0233.28Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Plexiglass (acrylic) the page groups this row under plastics and other1 1903.51.2960.351 7101 8312 1731 0440.0020.0235.43Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Polycarbonate the page groups this row under plastics and other1 2002.30.85190.351 3801 4781 754842.50.0030.143.89Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Polyester (thermo) the page groups this row under plastics and other1 3102.30.82140.41 3201 4461 940791.90.0030.144.87Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Polyethylene high density the page groups this row under plastics and other940 to 9600.7 to 1.40.441 0300.0030.1Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Polyethylene low density the page groups this row under plastics and other910 to 9250.2 to 0.50.446000.0030.1Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Polypropylene the page groups this row under plastics and other9051.4 to 2.10.41 3800.0030.1Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Polystyrene moulded the page groups this row under plastics and other1 0503.21.1940.341 7501 8562 1661 0660.0030.134.94Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Polystyrene expanded foam the page groups this row under plastics and other16 to 320.0012 to 0.00350.33000.00010.02Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Polyurethane the page groups this row under plastics and other9001.60.59260.351 3301 4231 689811.40.0030.145.57Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
PVC the page groups this row under plastics and other1 4002.810.41 4101 5432 070845.20.0030.142.04Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
PVDF the page groups this row under plastics and other1 7601.50.55560.35920985.51 170561.80.0030.165.82Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Nylon 6 the page groups this row under plastics and other1 2002.40.88890.351 4101 5101 792860.70.0030.142.96Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Nylon 66 the page groups this row under plastics and other1 120 to 1 1502.7 to 30.351 5900.0030.1Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Nylon 12 the page groups this row under plastics and other1 0101.2 to 1.60.351 1700.0030.1Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Rubber-neoprene the page groups this row under plastics and other1 100 to 1 2000.01 to 0.10.491900.050.1Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Kevlar 49 cloth the page groups this row under plastics and other; the loss factor column prints one number here where it prints two elsewhere, so only the internal one is held1 330314 8300.008Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Aluminum honeycomb 6.4 mm cell, 0.05 mm foil the page groups this row under aluminium honeycomb; a honeycomb panel and not a solid: the modulus and the density are effective, the geometry is in the variant, and the page leaves the speed blank because a one-dimensional speed does not mean anything here721.310.00010.01Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Aluminum honeycomb 6.4 mm cell, 0.08 mm foil the page groups this row under aluminium honeycomb; a honeycomb panel and not a solid: the modulus and the density are effective, the geometry is in the variant, and the page leaves the speed blank because a one-dimensional speed does not mean anything here962.240.00010.01Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Aluminum honeycomb 9.5 mm cell, 0.05 mm foil the page groups this row under aluminium honeycomb; a honeycomb panel and not a solid: the modulus and the density are effective, the geometry is in the variant, and the page leaves the speed blank because a one-dimensional speed does not mean anything here480.760.00010.01Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Aluminum honeycomb 9.5 mm cell, 0.13 mm foil the page groups this row under aluminium honeycomb; a honeycomb panel and not a solid: the modulus and the density are effective, the geometry is in the variant, and the page leaves the speed blank because a one-dimensional speed does not mean anything here1011.860.00010.01Bies 5e Table C.1, PDF pages 747-750 (printed pp. 718-721)
Aluminum2 7005 1500.0001 to 0.01Long 2e Table 12.1, PDF page 487 (printed p. 485)
Brick1 900 to 2 300…0.01Long 2e Table 12.1, PDF page 487 (printed p. 485)
Concrete, poured2 3003 4000.005 to 0.02Long 2e Table 12.1, PDF page 487 (printed p. 485)
Masonry block, hollow cinder nominal 6 in thick750…0.005 to 0.02Long 2e Table 12.1, PDF page 487 (printed p. 485)
Masonry block, hollow cinder with 5/8 in sand plaster each side nominal 6 in thick900…0.005 to 0.02Long 2e Table 12.1, PDF page 487 (printed p. 485)
Masonry block, hollow dense concrete, sand-filled 6 in thick1 100…0.007 to 0.02Long 2e Table 12.1, PDF page 487 (printed p. 485)
Masonry block, hollow dense concrete nominal 6 in thick1 700…Varies with frequencyLong 2e Table 12.1, PDF page 487 (printed p. 485)
Masonry block, solid dense concrete 4 in thick1 700…0.012Long 2e Table 12.1, PDF page 487 (printed p. 485)
Fir timber5503 8000.04Long 2e Table 12.1, PDF page 487 (printed p. 485)
Glass the loss factor carries the table's second footnote, which says it is very sensitive to construction techniques and edge conditions2 5005 2000.001 to 0.01Long 2e Table 12.1, PDF page 487 (printed p. 485)
Lead chemical or tellurium11 0001 2000.015Long 2e Table 12.1, PDF page 487 (printed p. 485)
Lead antimonial, hard11 0001 2000.002Long 2e Table 12.1, PDF page 487 (printed p. 485)
Plaster, solid, on metal or gypsum lath1 700…0.005 to 0.01Long 2e Table 12.1, PDF page 487 (printed p. 485)
Plexiglas or Lucite1 1501 8000.002Long 2e Table 12.1, PDF page 487 (printed p. 485)
Steel7 7005 0500.0001 to 0.01Long 2e Table 12.1, PDF page 487 (printed p. 485)
Gypboard 0.5 to 2 in6506 8000.01 to 0.03Long 2e Table 12.1, PDF page 487 (printed p. 485)
Plywood 0.25 to 1.25 in600…0.01 to 0.04Long 2e Table 12.1, PDF page 487 (printed p. 485)
Wood chip board 5 lb/ft2750…0.005 to 0.01Long 2e Table 12.1, PDF page 487 (printed p. 485)
Ladrillo macizo1 6500.00623.8Arau-Puchades (1999) Table 4.1, PDF page 129 (printed p. 126)
Hormigón denso the page prints the damping factor as 1 to 5 times 10^-32 3500.001 to 0.00521Arau-Puchades (1999) Table 4.1, PDF page 129 (printed p. 126)
Yeso1 0700.00333.25Arau-Puchades (1999) Table 4.1, PDF page 129 (printed p. 126)
Acero the page prints the damping factor as 1 to 6 times 10^-47 8500.0001 to 0.000610Arau-Puchades (1999) Table 4.1, PDF page 129 (printed p. 126)
Aluminio2 7000.003512.6Arau-Puchades (1999) Table 4.1, PDF page 129 (printed p. 126)
Plomo the page prints the damping factor as 0.5 to 2 times 10^-311 3000.0005 to 0.00250Arau-Puchades (1999) Table 4.1, PDF page 129 (printed p. 126)
Fibrocemento1 0900.00737Arau-Puchades (1999) Table 4.1, PDF page 129 (printed p. 126)
Madera-cemento1 2000.00350Arau-Puchades (1999) Table 4.1, PDF page 129 (printed p. 126)
Cartón-yeso8750.06346.7Arau-Puchades (1999) Table 4.1, PDF page 129 (printed p. 126)
Vidrio monolítico2 5000.00212Arau-Puchades (1999) Table 4.1, PDF page 129 (printed p. 126)
Vidrio laminar2 5000.0212Arau-Puchades (1999) Table 4.1, PDF page 129 (printed p. 126)
Madera aglomerada7500.02229.6Arau-Puchades (1999) Table 4.1, PDF page 129 (printed p. 126)
Madera pino7000.04116.7Arau-Puchades (1999) Table 4.1, PDF page 129 (printed p. 126)
Madera contrachapada6000.002820.75Arau-Puchades (1999) Table 4.1, PDF page 129 (printed p. 126)
Madera Flandes6400.02117.14Arau-Puchades (1999) Table 4.1, PDF page 129 (printed p. 126)
Caucho espumado4800.02270.78Arau-Puchades (1999) Table 4.1, PDF page 129 (printed p. 126)
Caucho normal1 0000.05850Arau-Puchades (1999) Table 4.1, PDF page 129 (printed p. 126)
Poliestireno extrusionado330.01108.8Arau-Puchades (1999) Table 4.1, PDF page 129 (printed p. 126)
Aluminium2 7007126.690.335 1505 4326 3003 14412.7Norton & Karczub 2e Appendix 4 A, PDF page 625 (printed p. 605)
Brass8 50010437.960.373 5003 7654 7002 11318.7Norton & Karczub 2e Appendix 4 A, PDF page 625 (printed p. 605)
Concrete (dense)2 600253 1013 10021.1Norton & Karczub 2e Appendix 4 A, PDF page 625 (printed p. 605)
Copper8 90012245.190.353 7003 9525 0002 25317.7Norton & Karczub 2e Appendix 4 A, PDF page 625 (printed p. 605)
Cork250500130.7Norton & Karczub 2e Appendix 4 A, PDF page 625 (printed p. 605)
Cast iron7 70010541.020.283 7003 8474 3502 30817.7Norton & Karczub 2e Appendix 4 A, PDF page 625 (printed p. 605)
Glass (Pyrex)2 30062250.245 2005 3485 6003 29712.6Norton & Karczub 2e Appendix 4 A, PDF page 625 (printed p. 605)
Gypsum (plasterboard)6506 8009.61Norton & Karczub 2e Appendix 4 A, PDF page 625 (printed p. 605)
Lead11 30016.55.7290.441 2001 3462 05071254.5Norton & Karczub 2e Appendix 4 A, PDF page 625 (printed p. 605)
Nickel8 80021080.150.314 9005 1385 8503 01813.3Norton & Karczub 2e Appendix 4 A, PDF page 625 (printed p. 605)
Particle board75066997.7Norton & Karczub 2e Appendix 4 A, PDF page 625 (printed p. 605)
Polyurethane720.019513.7513127.4Norton & Karczub 2e Appendix 4 A, PDF page 625 (printed p. 605)
Polystyrene420.011511.8512127.6Norton & Karczub 2e Appendix 4 A, PDF page 625 (printed p. 605)
PVC660.055912.991371.6Norton & Karczub 2e Appendix 4 A, PDF page 625 (printed p. 605)
Plywood6003 08021.2Norton & Karczub 2e Appendix 4 A, PDF page 625 (printed p. 605)
Rubber (hard)1 1002.30.82140.41 4501 5782 400864.145.1Norton & Karczub 2e Appendix 4 A, PDF page 625 (printed p. 605)
Rubber (soft)9500.00572.551 05062.2Norton & Karczub 2e Appendix 4 A, PDF page 625 (printed p. 605)
Silver10 5007828.470.372 7002 9343 7001 64724.2Norton & Karczub 2e Appendix 4 A, PDF page 625 (printed p. 605)
Steel7 70019576.170.285 0505 2426 1003 14512.9Norton & Karczub 2e Appendix 4 A, PDF page 625 (printed p. 605)
Tin7 3004516.920.332 5002 6303 0221 52226.1Norton & Karczub 2e Appendix 4 A, PDF page 625 (printed p. 605)
Wood (hard)650124 30015.2Norton & Karczub 2e Appendix 4 A, PDF page 625 (printed p. 605)
Aluminium0.0001Norton & Karczub 2e Table 6.1, PDF page 430 (printed p. 410)
Brick, concrete0.015Norton & Karczub 2e Table 6.1, PDF page 430 (printed p. 410)
Cast iron0.001Norton & Karczub 2e Table 6.1, PDF page 430 (printed p. 410)
Copper0.002Norton & Karczub 2e Table 6.1, PDF page 430 (printed p. 410)
Glass0.001Norton & Karczub 2e Table 6.1, PDF page 430 (printed p. 410)
Plaster0.005Norton & Karczub 2e Table 6.1, PDF page 430 (printed p. 410)
Plywood0.015Norton & Karczub 2e Table 6.1, PDF page 430 (printed p. 410)
PVC0.3Norton & Karczub 2e Table 6.1, PDF page 430 (printed p. 410)
Sand (dry)0.02 to 0.2Norton & Karczub 2e Table 6.1, PDF page 430 (printed p. 410)
Steel0.0001 to 0.0006Norton & Karczub 2e Table 6.1, PDF page 430 (printed p. 410)
Tin0.002Norton & Karczub 2e Table 6.1, PDF page 430 (printed p. 410)
Steel7 700 to 7 800190 to 2100.28 to 0.310.0001Vigran (2008) Table 3.1, PDF page 109 (printed p. 88)
Aluminium2 70066 to 720.0001Vigran (2008) Table 3.1, PDF page 109 (printed p. 88)
Glass2 500604 8990.0006 to 0.002Vigran (2008) Table 3.1, PDF page 109 (printed p. 88)
Concrete2 30032 to 400.15 to 0.20.004 to 0.008Vigran (2008) Table 3.1, PDF page 109 (printed p. 88)
Concrete (lightweight aggregate)400 to 6001 to 2.50.20.01 to 0.02Vigran (2008) Table 3.1, PDF page 109 (printed p. 88)
Concrete (autoclaved aerated) Footnote 2 of the table marks this modulus alone: where the heading's footnote 1 makes the whole column a dynamic modulus, this cell is the modulus for static pressure. It is therefore not comparable with the other eight rows of the same column.1 3003.80.20.01 to 0.02Vigran (2008) Table 3.1, PDF page 109 (printed p. 88)
Gypsum plate (plasterboard)800 to 9004.11.5770.30.01 to 0.015Vigran (2008) Table 3.1, PDF page 109 (printed p. 88)
Chipboard650 to 8003.81.5830.20.01 to 0.03Vigran (2008) Table 3.1, PDF page 109 (printed p. 88)
Fir, spruce400 to 7007 to 120.40.008 to 0.01Vigran (2008) Table 3.1, PDF page 109 (printed p. 88)

  • Arau-Puchades, H. (1999). ABC de la acústica arquitectónica. Grupo Editorial CEAC. Table 4.1: the source of the rows of the catalogue of solids that cite it.
  • Bies, D. A., Hansen, C. H., & Howard, C. Q. (2017). Engineering noise control (5th ed.). CRC Press. https://doi.org/10.1201/9781351228152 Table C.1: the source of the rows of the catalogue of solids that cite it.
  • Cremer, L., Heckl, M., & Petersson, B. A. T. (2005). Structure-borne sound: Structural vibrations and sound radiation at audio frequencies (3rd ed.). Springer. https://doi.org/10.1007/b137728 Table 4.3: the source of the rows of the catalogue of solids that cite it.
  • Hopkins, C. (2007). Sound insulation. Butterworth-Heinemann. https://doi.org/10.4324/9780080550473 Table A2: the source of the rows of the catalogue of solids that cite it.
  • Long, M. (2014). Architectural acoustics (2nd ed.). Academic Press. https://doi.org/10.1016/C2012-0-03257-5 Table 12.1: the source of the rows of the catalogue of solids that cite it.
  • Mechel, F. P. (Ed.). (2008). Formulas of acoustics (2nd ed.). Springer. https://doi.org/10.1007/978-3-540-76833-3 Table 3: the source of the rows of the catalogue of solids that cite it.
  • Norton, M. P., & Karczub, D. G. (2003). Fundamentals of noise and vibration analysis for engineers (2nd ed.). Cambridge University Press. https://doi.org/10.1017/CBO9781139163927 Appendix 4, part A, and Table 6.1: the source of the rows of the catalogue of solids that cite it.
  • Vigran, T. E. (2008). Building acoustics. CRC Press. https://doi.org/10.1201/9781482266016 Table 3.1: the source of the rows of the catalogue of solids that cite it.