Catalogue of predicted scattering coefficients
Key references: Cox & D'Antonio 2017
Each catalogue has a page of its own: choose another one here and open it, or narrow the rows of this one by name and by the table that printed them.
The same quantity as the scattering coefficients and not the same kind of number: these were computed with a boundary element model, and the two are separate catalogues so that a row cannot travel from one to the other unnoticed.
Cox prints three of them. Two are three-dimensional predictions of 3 m by 3 m single-plane diffusers, at normal and at random incidence, over the bands from 250 Hz upward, because the book says the coefficient below that should be taken as zero and prints nothing there. The third is two-dimensional, runs the whole range, and prints three lines per surface at 0, 56.9 and random incidence. Each row says which solver produced it.
The book is unusually frank about what they are worth, and the notes on each table quote it: the coefficient reads absorption as scattering, so the formulation needs revising for a surface that absorbs; the random incidence values of the two-dimensional table run high at low frequencies; and the coefficient reads a redirection as a dispersion, so a 45 degree triangle that sends a strong reflection straight back scores as if it had scattered.
Italic is a value this library worked out; a dotted underline is a cell that is not a plain number, and what it is reads on the cell; an asterisk is a note the page made about the row. Click a mark to read it, or give the table focus and press Enter to walk the marks with the arrow keys.
| Surface | Computed with | Angle of incidence ° | 100 Hz | 125 Hz | 160 Hz | 200 Hz | 250 Hz | 315 Hz | 400 Hz | 500 Hz | 630 Hz | 800 Hz | 1 kHz | 1.25 kHz | 1.6 kHz | 2 kHz | 2.5 kHz | 3.15 kHz | 4 kHz | 5 kHz | Source |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Sinusoidal cross-section h = 2 cm, L = 20 cm | three-dimensional boundary element prediction | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0.02 | 0.31 | 0.3 | 0.54 | 0.65 | Cox & D'Antonio 3e Table C.1, PDF pages 545-546 (printed pp. 488-489) | ||||||
| Sinusoidal cross-section h = 4 cm, L = 20 cm | three-dimensional boundary element prediction | 0 | 0 | 0 | 0 | 0 | 0.01 | 0.01 | 0.01 | 0.11 | 0.9 | 0.97 | 0.93 | 0.95 | Cox & D'Antonio 3e Table C.1, PDF pages 545-546 (printed pp. 488-489) | ||||||
| Sinusoidal cross-section h = 6 cm, L = 20 cm | three-dimensional boundary element prediction | 0 | 0 | 0 | 0 | 0.01 | 0.03 | 0.01 | 0.04 | 0.2 | 0.89 | 0.56 | 0.19 | 1 | Cox & D'Antonio 3e Table C.1, PDF pages 545-546 (printed pp. 488-489) | ||||||
| Sinusoidal cross-section h = 8 cm, L = 20 cm | three-dimensional boundary element prediction | 0 | 0 | 0 | 0.01 | 0.02 | 0.03 | 0.03 | 0.08 | 0.15 | 0.4 | 0.06 | 0.24 | 0.28 | Cox & D'Antonio 3e Table C.1, PDF pages 545-546 (printed pp. 488-489) | ||||||
| Sinusoidal cross-section h = 10 cm, L = 20 cm | three-dimensional boundary element prediction | 0 | 0.01 | 0.01 | 0.03 | 0.06 | 0.04 | 0.05 | 0.1 | 0.09 | 0.05 | 0.25 | 0.44 | 0.32 | Cox & D'Antonio 3e Table C.1, PDF pages 545-546 (printed pp. 488-489) | ||||||
| Sinusoidal cross-section h/L = 20 | three-dimensional boundary element prediction | 0 | 0 | 0 | 0 | 0 | 0.01 | 0.01 | 0.01 | 0.11 | 0.9 | 0.97 | 0.93 | 0.95 | Cox & D'Antonio 3e Table C.1, PDF pages 545-546 (printed pp. 488-489) | ||||||
| Triangular cross-section h = 2 cm, L = 20 cm | three-dimensional boundary element prediction | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0.01 | 0.22 | 0.21 | 0.39 | 0.47 | Cox & D'Antonio 3e Table C.1, PDF pages 545-546 (printed pp. 488-489) | ||||||
| Triangular cross-section h = 4 cm, L = 20 cm | three-dimensional boundary element prediction | 0 | 0 | 0 | 0 | 0 | 0.01 | 0 | 0.01 | 0.07 | 0.75 | 0.79 | 0.93 | 0.99 | Cox & D'Antonio 3e Table C.1, PDF pages 545-546 (printed pp. 488-489) | ||||||
| Triangular cross-section h = 6 cm, L = 20 cm | three-dimensional boundary element prediction | 0 | 0 | 0 | 0 | 0.01 | 0.03 | 0.01 | 0.02 | 0.16 | 1 | 0.88 | 0.47 | 1 | Cox & D'Antonio 3e Table C.1, PDF pages 545-546 (printed pp. 488-489) | ||||||
| Triangular cross-section h = 8 cm, L = 20 cm | three-dimensional boundary element prediction | 0 | 0 | 0.01 | 0.02 | 0.02 | 0.03 | 0.02 | 0.05 | 0.18 | 0.67 | 0.26 | 0.13 | 0.57 | Cox & D'Antonio 3e Table C.1, PDF pages 545-546 (printed pp. 488-489) | ||||||
| Triangular cross-section h = 10 cm, L = 20 cm | three-dimensional boundary element prediction | 0.01 | 0.01 | 0.02 | 0.03 | 0.05 | 0.03 | 0.03 | 0.08 | 0.14 | 0.23 | 0.06 | 0.27 | 0.23 | Cox & D'Antonio 3e Table C.1, PDF pages 545-546 (printed pp. 488-489) | ||||||
| Triangular cross-section h/L = 25 | three-dimensional boundary element prediction | 0 | 0 | 0 | 0.01 | 0 | 0.03 | 0.01 | 0.01 | 0.11 | 0.95 | 0.99 | 0.8 | 1 | Cox & D'Antonio 3e Table C.1, PDF pages 545-546 (printed pp. 488-489) | ||||||
| Rectangular cross-section battens h = 2 cm, L = 20 cm, w = 10 cm | three-dimensional boundary element prediction | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0.01 | 0.14 | 0.54 | 0.58 | 0.86 | 0.99 | Cox & D'Antonio 3e Table C.1, PDF pages 545-546 (printed pp. 488-489) | ||||||
| Rectangular cross-section battens h = 4 cm, L = 20 cm, w = 10 cm | three-dimensional boundary element prediction | 0 | 0 | 0 | 0.01 | 0.01 | 0.03 | 0.03 | 0.09 | 0.29 | 0.9 | 0.83 | 0.48 | 0.03 | Cox & D'Antonio 3e Table C.1, PDF pages 545-546 (printed pp. 488-489) | ||||||
| Rectangular cross-section battens h = 6 cm, L = 20 cm, w = 10 cm | three-dimensional boundary element prediction | 0 | 0 | 0.01 | 0.03 | 0.04 | 0.05 | 0.12 | 0.17 | 0.1 | 0.56 | 0.1 | 0.1 | 0.93 | Cox & D'Antonio 3e Table C.1, PDF pages 545-546 (printed pp. 488-489) | ||||||
| Rectangular cross-section battens h = 8 cm, L = 20 cm, w = 10 cm | three-dimensional boundary element prediction | 0.01 | 0.01 | 0.04 | 0.08 | 0.04 | 0.11 | 0.17 | 0.1 | 0.05 | 0.06 | 0.2 | 1 | 0.12 | Cox & D'Antonio 3e Table C.1, PDF pages 545-546 (printed pp. 488-489) | ||||||
| Rectangular cross-section battens h = 10 cm, L = 20 cm, w = 10 cm | three-dimensional boundary element prediction | 0.05 | 0.04 | 0.13 | 0.06 | 0.08 | 0.14 | 0.11 | 0.05 | 0.02 | 0.3 | 0.98 | 0.22 | 0.71 | Cox & D'Antonio 3e Table C.1, PDF pages 545-546 (printed pp. 488-489) | ||||||
| Rectangular cross-section battens h/L = 15 | three-dimensional boundary element prediction | 0 | 0 | 0 | 0 | 0 | 0.04 | 0.01 | 0.03 | 0.44 | 0.83 | 0.96 | 0.94 | 0.44 | Cox & D'Antonio 3e Table C.1, PDF pages 545-546 (printed pp. 488-489) | ||||||
| Sinusoidal cross-section h = 2 cm, L = 20 cm | three-dimensional boundary element prediction | 0 | 0 | 0 | 0 | 0 | 0.01 | 0.07 | 0.12 | 0.16 | 0.2 | 0.25 | 0.36 | 0.49 | Cox & D'Antonio 3e Table C.2, PDF pages 547-548 (printed pp. 490-491) | ||||||
| Sinusoidal cross-section h = 4 cm, L = 20 cm | three-dimensional boundary element prediction | 0 | 0 | 0.01 | 0.01 | 0.01 | 0.03 | 0.16 | 0.32 | 0.47 | 0.57 | 0.68 | 0.81 | 0.87 | Cox & D'Antonio 3e Table C.2, PDF pages 547-548 (printed pp. 490-491) | ||||||
| Sinusoidal cross-section h = 6 cm, L = 20 cm | three-dimensional boundary element prediction | 0.01 | 0.01 | 0.01 | 0.02 | 0.03 | 0.09 | 0.21 | 0.45 | 0.69 | 0.78 | 0.81 | 0.84 | 0.82 | Cox & D'Antonio 3e Table C.2, PDF pages 547-548 (printed pp. 490-491) | ||||||
| Sinusoidal cross-section h = 8 cm, L = 20 cm | three-dimensional boundary element prediction | 0.01 | 0.02 | 0.03 | 0.05 | 0.08 | 0.12 | 0.23 | 0.49 | 0.74 | 0.71 | 0.72 | 0.78 | 0.8 | Cox & D'Antonio 3e Table C.2, PDF pages 547-548 (printed pp. 490-491) | ||||||
| Sinusoidal cross-section h = 10 cm, L = 20 cm | three-dimensional boundary element prediction | 0.02 | 0.04 | 0.05 | 0.09 | 0.13 | 0.15 | 0.23 | 0.46 | 0.59 | 0.48 | 0.65 | 0.7 | 0.78 | Cox & D'Antonio 3e Table C.2, PDF pages 547-548 (printed pp. 490-491) | ||||||
| Sinusoidal cross-section h/L = 35 | three-dimensional boundary element prediction | 0.09 | 0.08 | 0.09 | 0.11 | 0.05 | 0.1 | 0.22 | 0.48 | 0.75 | 0.79 | 0.79 | 0.81 | 0.82 | Cox & D'Antonio 3e Table C.2, PDF pages 547-548 (printed pp. 490-491) | ||||||
| Triangular cross-section h = 2 cm, L = 20 cm | three-dimensional boundary element prediction | 0 | 0 | 0 | 0 | 0 | 0.01 | 0.06 | 0.09 | 0.12 | 0.15 | 0.18 | 0.27 | 0.37 | Cox & D'Antonio 3e Table C.2, PDF pages 547-548 (printed pp. 490-491) | ||||||
| Triangular cross-section h = 4 cm, L = 20 cm | three-dimensional boundary element prediction | 0 | 0 | 0.01 | 0.01 | 0.01 | 0.02 | 0.15 | 0.26 | 0.38 | 0.47 | 0.56 | 0.71 | 0.82 | Cox & D'Antonio 3e Table C.2, PDF pages 547-548 (printed pp. 490-491) | ||||||
| Triangular cross-section h = 6 cm, L = 20 cm | three-dimensional boundary element prediction | 0.01 | 0.01 | 0.01 | 0.02 | 0.03 | 0.07 | 0.2 | 0.41 | 0.61 | 0.71 | 0.79 | 0.87 | 0.89 | Cox & D'Antonio 3e Table C.2, PDF pages 547-548 (printed pp. 490-491) | ||||||
| Triangular cross-section h = 8 cm, L = 20 cm | three-dimensional boundary element prediction | 0.02 | 0.02 | 0.03 | 0.04 | 0.06 | 0.11 | 0.23 | 0.48 | 0.74 | 0.76 | 0.75 | 0.84 | 0.87 | Cox & D'Antonio 3e Table C.2, PDF pages 547-548 (printed pp. 490-491) | ||||||
| Triangular cross-section h = 10 cm, L = 20 cm | three-dimensional boundary element prediction | 0.04 | 0.03 | 0.05 | 0.08 | 0.12 | 0.14 | 0.24 | 0.49 | 0.73 | 0.6 | 0.64 | 0.76 | 0.82 | Cox & D'Antonio 3e Table C.2, PDF pages 547-548 (printed pp. 490-491) | ||||||
| Triangular cross-section h/L = 40 | three-dimensional boundary element prediction | 0.02 | 0.02 | 0.03 | 0.04 | 0.06 | 0.11 | 0.23 | 0.48 | 0.74 | 0.76 | 0.75 | 0.84 | 0.87 | Cox & D'Antonio 3e Table C.2, PDF pages 547-548 (printed pp. 490-491) | ||||||
| Rectangular cross-section battens h = 2 cm, L = 20 cm, w = 10 cm | three-dimensional boundary element prediction | 0 | 0 | 0 | 0 | 0 | 0.01 | 0.08 | 0.19 | 0.32 | 0.42 | 0.47 | 0.72 | 0.82 | Cox & D'Antonio 3e Table C.2, PDF pages 547-548 (printed pp. 490-491) | ||||||
| Rectangular cross-section battens h = 4 cm, L = 20 cm, w = 10 cm | three-dimensional boundary element prediction | 0.01 | 0.01 | 0.02 | 0.02 | 0.04 | 0.1 | 0.24 | 0.47 | 0.73 | 0.82 | 0.74 | 0.65 | 0.48 | Cox & D'Antonio 3e Table C.2, PDF pages 547-548 (printed pp. 490-491) | ||||||
| Rectangular cross-section battens h = 6 cm, L = 20 cm, w = 10 cm | three-dimensional boundary element prediction | 0.02 | 0.03 | 0.04 | 0.07 | 0.12 | 0.16 | 0.29 | 0.51 | 0.7 | 0.68 | 0.4 | 0.24 | 0.56 | Cox & D'Antonio 3e Table C.2, PDF pages 547-548 (printed pp. 490-491) | ||||||
| Rectangular cross-section battens h = 8 cm, L = 20 cm, w = 10 cm | three-dimensional boundary element prediction | 0.03 | 0.04 | 0.07 | 0.13 | 0.15 | 0.19 | 0.29 | 0.44 | 0.46 | 0.39 | 0.31 | 0.63 | 0.6 | Cox & D'Antonio 3e Table C.2, PDF pages 547-548 (printed pp. 490-491) | ||||||
| Rectangular cross-section battens h = 10 cm, L = 20 cm, w = 10 cm | three-dimensional boundary element prediction | 0.05 | 0.08 | 0.14 | 0.18 | 0.19 | 0.21 | 0.25 | 0.32 | 0.22 | 0.37 | 0.68 | 0.64 | 0.47 | Cox & D'Antonio 3e Table C.2, PDF pages 547-548 (printed pp. 490-491) | ||||||
| Rectangular cross-section battens h/L = 20 | three-dimensional boundary element prediction | 0.01 | 0.01 | 0.02 | 0.02 | 0.04 | 0.1 | 0.24 | 0.47 | 0.73 | 0.82 | 0.74 | 0.65 | 0.48 | Cox & D'Antonio 3e Table C.2, PDF pages 547-548 (printed pp. 490-491) | ||||||
| Rectangular cross-section battens h = 4 cm, L = 20 cm, w → 0 cm (extremely thin) | three-dimensional boundary element prediction | 0.01 | 0.01 | 0.01 | 0.02 | 0.03 | 0.06 | 0.15 | 0.14 | 0.12 | 0.23 | 0.21 | 0.24 | 0.22 | Cox & D'Antonio 3e Table C.2, PDF pages 547-548 (printed pp. 490-491) | ||||||
| Rectangular cross-section battens h = 4 cm, L = 20 cm, w = 5 cm | three-dimensional boundary element prediction | 0.01 | 0.01 | 0.01 | 0.02 | 0.04 | 0.09 | 0.22 | 0.4 | 0.41 | 0.41 | 0.6 | 0.55 | 0.41 | Cox & D'Antonio 3e Table C.2, PDF pages 547-548 (printed pp. 490-491) | ||||||
| Rectangular cross-section battens h = 4 cm, L = 20 cm, w = 10 cm The page prints this surface twice on one page: it closes the height series of the group and opens the spacing series, with the same thirteen values both times, because it is the reference of both comparisons. | three-dimensional boundary element prediction | 0.01 | 0.01 | 0.02 | 0.02 | 0.04 | 0.1 | 0.24 | 0.47 | 0.73 | 0.82 | 0.74 | 0.65 | 0.48 | Cox & D'Antonio 3e Table C.2, PDF pages 547-548 (printed pp. 490-491) | ||||||
| Rectangular cross-section battens h = 4 cm, L = 20 cm, w = 15 cm | three-dimensional boundary element prediction | 0.01 | 0.01 | 0.01 | 0.02 | 0.03 | 0.06 | 0.2 | 0.4 | 0.69 | 0.7 | 0.6 | 0.46 | 0.36 | Cox & D'Antonio 3e Table C.2, PDF pages 547-548 (printed pp. 490-491) | ||||||
| Plane surfaces, non-absorbing, any size any angle | two-dimensional boundary element prediction | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) | |
| 1. Effect of changing diffuser width and periodicity, semicylinder(s) non-absorbing surfaces, radius 0.3 m (1 cm flat section between each period) 1 period, 0.61 m wide normal | two-dimensional boundary element prediction | 0 | 0.06 | 0.09 | 0.13 | 0.2 | 0.29 | 0.38 | 0.43 | 0.45 | 0.59 | 0.78 | 0.82 | 0.8 | 0.92 | 0.89 | 0.92 | 0.94 | 0.95 | 0.96 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) |
| 1. Effect of changing diffuser width and periodicity, semicylinder(s) non-absorbing surfaces, radius 0.3 m (1 cm flat section between each period) 1 period, 0.61 m wide 56.9 degrees | two-dimensional boundary element prediction | 56.9 | 0.27 | 0.24 | 0.23 | 0.26 | 0.32 | 0.45 | 0.69 | 0.79 | 0.8 | 0.92 | 0.88 | 0.91 | 0.9 | 0.9 | 0.91 | 0.92 | 0.94 | 0.96 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) |
| 1. Effect of changing diffuser width and periodicity, semicylinder(s) non-absorbing surfaces, radius 0.3 m (1 cm flat section between each period) 1 period, 0.61 m wide random | two-dimensional boundary element prediction | 0.24 | 0.21 | 0.21 | 0.25 | 0.32 | 0.43 | 0.62 | 0.73 | 0.74 | 0.82 | 0.86 | 0.88 | 0.9 | 0.91 | 0.94 | 0.95 | 0.96 | 0.96 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) | |
| 1. Effect of changing diffuser width and periodicity, semicylinder(s) non-absorbing surfaces, radius 0.3 m (1 cm flat section between each period) 2 periods, 1.22 m wide normal | two-dimensional boundary element prediction | 0 | 0.04 | 0.05 | 0.05 | 0.04 | 0.02 | 0.11 | 0.65 | 0.87 | 0.64 | 0.56 | 0.87 | 0.79 | 0.9 | 0.89 | 0.92 | 0.93 | 0.94 | 0.91 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) |
| 1. Effect of changing diffuser width and periodicity, semicylinder(s) non-absorbing surfaces, radius 0.3 m (1 cm flat section between each period) 2 periods, 1.22 m wide 56.9 degrees | two-dimensional boundary element prediction | 56.9 | 0.13 | 0.12 | 0.18 | 0.4 | 0.43 | 0.71 | 0.85 | 0.93 | 0.8 | 0.71 | 0.81 | 0.87 | 0.9 | 0.89 | 0.93 | 0.92 | 0.94 | 0.96 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) |
| 1. Effect of changing diffuser width and periodicity, semicylinder(s) non-absorbing surfaces, radius 0.3 m (1 cm flat section between each period) 2 periods, 1.22 m wide random | two-dimensional boundary element prediction | 0.16 | 0.16 | 0.21 | 0.32 | 0.34 | 0.52 | 0.8 | 0.93 | 0.76 | 0.67 | 0.88 | 0.87 | 0.91 | 0.91 | 0.93 | 0.94 | 0.95 | 0.95 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) | |
| 1. Effect of changing diffuser width and periodicity, semicylinder(s) non-absorbing surfaces, radius 0.3 m (1 cm flat section between each period) 4 periods, 2.44 m wide normal | two-dimensional boundary element prediction | 0 | 0.01 | 0 | 0.02 | 0.06 | 0.02 | 0.08 | 0.35 | 0.74 | 0.55 | 0.49 | 0.87 | 0.77 | 0.87 | 0.84 | 0.8 | 0.86 | 0.83 | 0.88 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) |
| 1. Effect of changing diffuser width and periodicity, semicylinder(s) non-absorbing surfaces, radius 0.3 m (1 cm flat section between each period) 4 periods, 2.44 m wide 56.9 degrees | two-dimensional boundary element prediction | 56.9 | 0.14 | 0.19 | 0.24 | 0.34 | 0.36 | 0.82 | 0.87 | 0.96 | 0.76 | 0.52 | 0.77 | 0.86 | 0.9 | 0.88 | 0.92 | 0.92 | 0.95 | 0.98 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) |
| 1. Effect of changing diffuser width and periodicity, semicylinder(s) non-absorbing surfaces, radius 0.3 m (1 cm flat section between each period) 4 periods, 2.44 m wide random | two-dimensional boundary element prediction | 0.21 | 0.22 | 0.24 | 0.29 | 0.3 | 0.53 | 0.78 | 0.93 | 0.71 | 0.56 | 0.87 | 0.86 | 0.9 | 0.88 | 0.9 | 0.93 | 0.94 | 0.94 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) | |
| 1. Effect of changing diffuser width and periodicity, semicylinder(s) non-absorbing surfaces, radius 0.3 m (1 cm flat section between each period) 6 periods, 3.66 m wide normal | two-dimensional boundary element prediction | 0 | 0 | 0.01 | 0.01 | 0.04 | 0.03 | 0.05 | 0.25 | 0.55 | 0.53 | 0.45 | 0.86 | 0.72 | 0.8 | 0.81 | 0.79 | 0.85 | 0.82 | 0.95 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) |
| 1. Effect of changing diffuser width and periodicity, semicylinder(s) non-absorbing surfaces, radius 0.3 m (1 cm flat section between each period) 6 periods, 3.66 m wide 56.9 degrees | two-dimensional boundary element prediction | 56.9 | 0.15 | 0.2 | 0.23 | 0.26 | 0.24 | 0.84 | 0.89 | 0.97 | 0.74 | 0.48 | 0.75 | 0.85 | 0.89 | 0.87 | 0.94 | 0.95 | 0.97 | 0.98 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) |
| 1. Effect of changing diffuser width and periodicity, semicylinder(s) non-absorbing surfaces, radius 0.3 m (1 cm flat section between each period) 6 periods, 3.66 m wide random | two-dimensional boundary element prediction | 0.22 | 0.23 | 0.24 | 0.26 | 0.26 | 0.52 | 0.76 | 0.91 | 0.68 | 0.51 | 0.86 | 0.85 | 0.89 | 0.88 | 0.9 | 0.94 | 0.94 | 0.95 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) | |
| 1. Effect of changing diffuser width and periodicity, semicylinder(s) non-absorbing surfaces, radius 0.3 m (1 cm flat section between each period) 12 periods, 7.32 m wide normal | two-dimensional boundary element prediction | 0 | 0 | 0 | 0.01 | 0.02 | 0.02 | 0.03 | 0.13 | 0.33 | 0.48 | 0.4 | 0.86 | 0.76 | 0.84 | 0.87 | 0.83 | 0.81 | 0.87 | 0.9 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) |
| 1. Effect of changing diffuser width and periodicity, semicylinder(s) non-absorbing surfaces, radius 0.3 m (1 cm flat section between each period) 12 periods, 7.32 m wide 56.9 degrees | two-dimensional boundary element prediction | 56.9 | 0.16 | 0.15 | 0.1 | 0.08 | 0.12 | 0.81 | 0.89 | 0.97 | 0.71 | 0.4 | 0.74 | 0.88 | 0.93 | 0.9 | 0.94 | 0.91 | 0.93 | 0.94 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) |
| 1. Effect of changing diffuser width and periodicity, semicylinder(s) non-absorbing surfaces, radius 0.3 m (1 cm flat section between each period) 12 periods, 7.32 m wide random | two-dimensional boundary element prediction | 0.23 | 0.22 | 0.21 | 0.2 | 0.19 | 0.48 | 0.73 | 0.87 | 0.64 | 0.46 | 0.86 | 0.86 | 0.89 | 0.87 | 0.89 | 0.92 | 0.92 | 0.91 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) | |
| 2. Effect of surface depth, 6 semiellipses, non-absorbing, each width 0.6 m, total width 3.66 m (1 cm flat section between semiellipses) 1 cm deep normal | two-dimensional boundary element prediction | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0.01 | 0.01 | 0.01 | 0.02 | 0.02 | 0.04 | 0.04 | 0.1 | 0.14 | 0.37 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) |
| 2. Effect of surface depth, 6 semiellipses, non-absorbing, each width 0.6 m, total width 3.66 m (1 cm flat section between semiellipses) 1 cm deep 56.9 degrees | two-dimensional boundary element prediction | 56.9 | 0 | 0 | 0 | 0 | 0 | 0.01 | 0 | 0 | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 | 0.02 | 0.03 | 0.07 | 0.21 | 0.2 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) |
| 2. Effect of surface depth, 6 semiellipses, non-absorbing, each width 0.6 m, total width 3.66 m (1 cm flat section between semiellipses) 1 cm deep random | two-dimensional boundary element prediction | 0 | 0 | 0 | 0 | 0 | 0.02 | 0.01 | 0.01 | 0.02 | 0.01 | 0.02 | 0.02 | 0.03 | 0.04 | 0.06 | 0.1 | 0.13 | 0.2 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) | |
| 2. Effect of surface depth, 6 semiellipses, non-absorbing, each width 0.6 m, total width 3.66 m (1 cm flat section between semiellipses) 2 cm deep normal | two-dimensional boundary element prediction | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0.01 | 0.03 | 0.04 | 0.05 | 0.07 | 0.09 | 0.15 | 0.17 | 0.36 | 0.47 | 0.8 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) |
| 2. Effect of surface depth, 6 semiellipses, non-absorbing, each width 0.6 m, total width 3.66 m (1 cm flat section between semiellipses) 2 cm deep 56.9 degrees | two-dimensional boundary element prediction | 56.9 | 0 | 0 | 0 | 0 | 0 | 0.02 | 0.02 | 0.02 | 0.02 | 0.03 | 0.03 | 0.04 | 0.05 | 0.08 | 0.13 | 0.27 | 0.53 | 0.54 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) |
| 2. Effect of surface depth, 6 semiellipses, non-absorbing, each width 0.6 m, total width 3.66 m (1 cm flat section between semiellipses) 2 cm deep random | two-dimensional boundary element prediction | 0 | 0 | 0 | 0 | 0.01 | 0.05 | 0.04 | 0.04 | 0.06 | 0.05 | 0.07 | 0.08 | 0.1 | 0.15 | 0.22 | 0.33 | 0.41 | 0.53 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) | |
| 2. Effect of surface depth, 6 semiellipses, non-absorbing, each width 0.6 m, total width 3.66 m (1 cm flat section between semiellipses) 5 cm deep normal | two-dimensional boundary element prediction | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0.01 | 0.06 | 0.2 | 0.23 | 0.33 | 0.4 | 0.51 | 0.67 | 0.77 | 0.86 | 0.84 | 0.92 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) |
| 2. Effect of surface depth, 6 semiellipses, non-absorbing, each width 0.6 m, total width 3.66 m (1 cm flat section between semiellipses) 5 cm deep 56.9 degrees | two-dimensional boundary element prediction | 56.9 | 0 | 0 | 0 | 0 | 0.01 | 0.12 | 0.11 | 0.11 | 0.15 | 0.16 | 0.19 | 0.24 | 0.29 | 0.39 | 0.54 | 0.85 | 0.93 | 0.94 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) |
| 2. Effect of surface depth, 6 semiellipses, non-absorbing, each width 0.6 m, total width 3.66 m (1 cm flat section between semiellipses) 5 cm deep random | two-dimensional boundary element prediction | 0 | 0 | 0.01 | 0.01 | 0.06 | 0.16 | 0.16 | 0.18 | 0.22 | 0.25 | 0.31 | 0.38 | 0.47 | 0.59 | 0.71 | 0.8 | 0.82 | 0.85 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) | |
| 2. Effect of surface depth, 6 semiellipses, non-absorbing, each width 0.6 m, total width 3.66 m (1 cm flat section between semiellipses) 10 cm deep normal | two-dimensional boundary element prediction | 0 | 0 | 0 | 0 | 0 | 0 | 0.01 | 0.03 | 0.26 | 0.64 | 0.71 | 0.85 | 0.82 | 0.73 | 0.8 | 0.88 | 0.86 | 0.93 | 0.96 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) |
| 2. Effect of surface depth, 6 semiellipses, non-absorbing, each width 0.6 m, total width 3.66 m (1 cm flat section between semiellipses) 10 cm deep 56.9 degrees | two-dimensional boundary element prediction | 56.9 | 0 | 0 | 0 | 0.01 | 0.05 | 0.38 | 0.35 | 0.37 | 0.46 | 0.51 | 0.56 | 0.65 | 0.72 | 0.81 | 0.92 | 0.93 | 0.94 | 0.95 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) |
| 2. Effect of surface depth, 6 semiellipses, non-absorbing, each width 0.6 m, total width 3.66 m (1 cm flat section between semiellipses) 10 cm deep random | two-dimensional boundary element prediction | 0.02 | 0.04 | 0.06 | 0.09 | 0.15 | 0.31 | 0.36 | 0.44 | 0.54 | 0.64 | 0.73 | 0.78 | 0.8 | 0.84 | 0.89 | 0.91 | 0.93 | 0.94 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) | |
| 2. Effect of surface depth, 6 semiellipses, non-absorbing, each width 0.6 m, total width 3.66 m (1 cm flat section between semiellipses) 20 cm deep normal | two-dimensional boundary element prediction | 0 | 0 | 0 | 0 | 0.01 | 0.01 | 0.03 | 0.12 | 0.66 | 0.91 | 0.61 | 0.26 | 0.78 | 0.86 | 0.76 | 0.91 | 0.88 | 0.87 | 0.86 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) |
| 2. Effect of surface depth, 6 semiellipses, non-absorbing, each width 0.6 m, total width 3.66 m (1 cm flat section between semiellipses) 20 cm deep 56.9 degrees | two-dimensional boundary element prediction | 56.9 | 0.03 | 0.04 | 0.06 | 0.09 | 0.19 | 0.75 | 0.76 | 0.88 | 0.87 | 0.81 | 0.7 | 0.72 | 0.85 | 0.92 | 0.91 | 0.96 | 0.97 | 0.98 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) |
| 2. Effect of surface depth, 6 semiellipses, non-absorbing, each width 0.6 m, total width 3.66 m (1 cm flat section between semiellipses) 20 cm deep random | two-dimensional boundary element prediction | 0.14 | 0.16 | 0.18 | 0.2 | 0.25 | 0.47 | 0.64 | 0.87 | 0.9 | 0.76 | 0.62 | 0.8 | 0.9 | 0.87 | 0.92 | 0.93 | 0.94 | 0.95 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) | |
| 2. Effect of surface depth, 6 semiellipses, non-absorbing, each width 0.6 m, total width 3.66 m (1 cm flat section between semiellipses) 30 cm deep (semicylinder) normal | two-dimensional boundary element prediction | 0 | 0 | 0.01 | 0.01 | 0.04 | 0.03 | 0.05 | 0.25 | 0.55 | 0.53 | 0.45 | 0.86 | 0.72 | 0.8 | 0.81 | 0.79 | 0.85 | 0.82 | 0.95 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) |
| 2. Effect of surface depth, 6 semiellipses, non-absorbing, each width 0.6 m, total width 3.66 m (1 cm flat section between semiellipses) 30 cm deep (semicylinder) 56.9 degrees | two-dimensional boundary element prediction | 56.9 | 0.15 | 0.2 | 0.23 | 0.26 | 0.24 | 0.84 | 0.89 | 0.97 | 0.74 | 0.48 | 0.75 | 0.85 | 0.89 | 0.87 | 0.94 | 0.95 | 0.97 | 0.98 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) |
| 2. Effect of surface depth, 6 semiellipses, non-absorbing, each width 0.6 m, total width 3.66 m (1 cm flat section between semiellipses) 30 cm deep (semicylinder) random | two-dimensional boundary element prediction | 0.22 | 0.23 | 0.24 | 0.26 | 0.26 | 0.52 | 0.76 | 0.91 | 0.68 | 0.51 | 0.86 | 0.85 | 0.89 | 0.88 | 0.9 | 0.94 | 0.94 | 0.95 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) | |
| 3. Triangles, non-absorbing, 3.66 m wide (0.01 cm flat section between each period) 15 periods, 60° normal | two-dimensional boundary element prediction | 0 | 0.01 | 0.01 | 0 | 0 | 0 | 0.01 | 0.02 | 0.03 | 0.04 | 0.06 | 0.05 | 0.06 | 0.37 | 0.12 | 0.06 | 0.12 | 0.13 | 0.17 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) |
| 3. Triangles, non-absorbing, 3.66 m wide (0.01 cm flat section between each period) 15 periods, 60° 56.9 degrees | two-dimensional boundary element prediction | 56.9 | 0.49 | 0.6 | 0.68 | 0.71 | 0.58 | 0.19 | 0.18 | 0.33 | 0.25 | 0.45 | 0.23 | 0.27 | 0.68 | 0.65 | 0.95 | 0.92 | 0.93 | 0.98 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) |
| 3. Triangles, non-absorbing, 3.66 m wide (0.01 cm flat section between each period) 15 periods, 60° random | two-dimensional boundary element prediction | 0.34 | 0.35 | 0.35 | 0.34 | 0.32 | 0.28 | 0.24 | 0.3 | 0.27 | 0.32 | 0.24 | 0.34 | 0.5 | 0.53 | 0.67 | 0.69 | 0.72 | 0.75 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) | |
| 3. Triangles, non-absorbing, 3.66 m wide (0.01 cm flat section between each period) 9 periods, 45° normal | two-dimensional boundary element prediction | 0 | 0 | 0 | 0 | 0 | 0.01 | 0.04 | 0.03 | 0.07 | 0.16 | 0.29 | 0.3 | 0.17 | 0.23 | 0.22 | 0.22 | 0.19 | 0.23 | 0.28 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) |
| 3. Triangles, non-absorbing, 3.66 m wide (0.01 cm flat section between each period) 9 periods, 45° 56.9 degrees | two-dimensional boundary element prediction | 56.9 | 0.03 | 0.04 | 0.06 | 0.07 | 0.08 | 0.2 | 0.54 | 0.95 | 0.99 | 0.75 | 0.93 | 0.97 | 0.99 | 0.99 | 0.99 | 0.99 | 1 | 1 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) |
| 3. Triangles, non-absorbing, 3.66 m wide (0.01 cm flat section between each period) 9 periods, 45° random | two-dimensional boundary element prediction | 0.15 | 0.17 | 0.19 | 0.21 | 0.23 | 0.28 | 0.37 | 0.59 | 0.8 | 0.79 | 0.69 | 0.82 | 0.83 | 0.87 | 0.89 | 0.9 | 0.9 | 0.91 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) | |
| 3. Triangles, non-absorbing, 3.66 m wide (0.01 cm flat section between each period) 6 periods, 30° 3.66 m wide normal | two-dimensional boundary element prediction | 0 | 0 | 0 | 0 | 0 | 0.01 | 0.02 | 0.06 | 0.36 | 0.96 | 0.98 | 0.81 | 0.99 | 0.89 | 0.97 | 0.97 | 0.99 | 1 | 0.99 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) |
| 3. Triangles, non-absorbing, 3.66 m wide (0.01 cm flat section between each period) 6 periods, 30° 3.66 m wide 56.9 degrees | two-dimensional boundary element prediction | 56.9 | 0.01 | 0.02 | 0.02 | 0.04 | 0.18 | 0.81 | 0.76 | 0.72 | 0.7 | 0.83 | 0.9 | 0.94 | 0.99 | 1 | 0.99 | 0.99 | 1 | 1 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) |
| 3. Triangles, non-absorbing, 3.66 m wide (0.01 cm flat section between each period) 6 periods, 30° 3.66 m wide random | two-dimensional boundary element prediction | 0.11 | 0.13 | 0.14 | 0.17 | 0.26 | 0.47 | 0.61 | 0.72 | 0.81 | 0.9 | 0.93 | 0.95 | 0.95 | 0.97 | 0.97 | 0.98 | 0.98 | 0.98 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) | |
| 3. Triangles, non-absorbing, 3.66 m wide (0.01 cm flat section between each period) 3 periods, 18° normal | two-dimensional boundary element prediction | 0 | 0 | 0.01 | 0.01 | 0.02 | 0.17 | 0.49 | 0.66 | 0.78 | 0.9 | 0.99 | 0.98 | 0.95 | 0.99 | 0.99 | 0.99 | 0.99 | 0.99 | 0.99 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) |
| 3. Triangles, non-absorbing, 3.66 m wide (0.01 cm flat section between each period) 3 periods, 18° 56.9 degrees | two-dimensional boundary element prediction | 56.9 | 0.01 | 0.1 | 0.37 | 0.42 | 0.37 | 0.39 | 0.43 | 0.51 | 0.59 | 0.71 | 0.82 | 0.94 | 0.98 | 0.94 | 0.94 | 0.98 | 0.97 | 0.98 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) |
| 3. Triangles, non-absorbing, 3.66 m wide (0.01 cm flat section between each period) 3 periods, 18° random | two-dimensional boundary element prediction | 0.07 | 0.17 | 0.31 | 0.38 | 0.41 | 0.48 | 0.56 | 0.67 | 0.78 | 0.88 | 0.93 | 0.94 | 0.97 | 0.98 | 0.99 | 0.99 | 0.99 | 0.99 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) | |
| 4. Semiellipses mounted on 3.63 m wide flat baffle, non-absorbing, each semiellipse 0.6 m wide, 0.2 m deep 1 semiellipse in the middle of baffle normal | two-dimensional boundary element prediction | 0 | 0.01 | 0.02 | 0.03 | 0.09 | 0.2 | 0.22 | 0.36 | 0.4 | 0.35 | 0.22 | 0.19 | 0.27 | 0.2 | 0.19 | 0.14 | 0.18 | 0.21 | 0.3 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) |
| 4. Semiellipses mounted on 3.63 m wide flat baffle, non-absorbing, each semiellipse 0.6 m wide, 0.2 m deep 1 semiellipse in the middle of baffle 56.9 degrees | two-dimensional boundary element prediction | 56.9 | 0.09 | 0.17 | 0.24 | 0.29 | 0.37 | 0.39 | 0.43 | 0.48 | 0.52 | 0.47 | 0.44 | 0.43 | 0.37 | 0.48 | 0.67 | 0.74 | 0.77 | 0.6 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) |
| 4. Semiellipses mounted on 3.63 m wide flat baffle, non-absorbing, each semiellipse 0.6 m wide, 0.2 m deep 1 semiellipse in the middle of baffle random | two-dimensional boundary element prediction | 0.15 | 0.22 | 0.28 | 0.32 | 0.38 | 0.42 | 0.47 | 0.51 | 0.53 | 0.48 | 0.44 | 0.46 | 0.48 | 0.49 | 0.5 | 0.53 | 0.52 | 0.54 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) | |
| 4. Semiellipses mounted on 3.63 m wide flat baffle, non-absorbing, each semiellipse 0.6 m wide, 0.2 m deep 3 semiellipses with 0.6 m flat sections between normal | two-dimensional boundary element prediction | 0 | 0 | 0.01 | 0.03 | 0.05 | 0.26 | 0.72 | 0.88 | 0.89 | 0.7 | 0.46 | 0.53 | 0.65 | 0.63 | 0.58 | 0.51 | 0.66 | 0.68 | 0.76 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) |
| 4. Semiellipses mounted on 3.63 m wide flat baffle, non-absorbing, each semiellipse 0.6 m wide, 0.2 m deep 3 semiellipses with 0.6 m flat sections between 56.9 degrees | two-dimensional boundary element prediction | 56.9 | 0.03 | 0.17 | 0.52 | 0.62 | 0.56 | 0.66 | 0.78 | 0.8 | 0.9 | 0.95 | 0.94 | 0.72 | 0.54 | 0.72 | 0.9 | 0.8 | 0.91 | 0.91 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) |
| 4. Semiellipses mounted on 3.63 m wide flat baffle, non-absorbing, each semiellipse 0.6 m wide, 0.2 m deep 3 semiellipses with 0.6 m flat sections between random | two-dimensional boundary element prediction | 0.13 | 0.22 | 0.38 | 0.5 | 0.57 | 0.67 | 0.79 | 0.85 | 0.85 | 0.76 | 0.69 | 0.75 | 0.77 | 0.75 | 0.79 | 0.85 | 0.81 | 0.78 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) | |
| 5. Optimized curved surfaces, 3.6 m wide, modulated arrays 3 periods, 30 cm deep normal | two-dimensional boundary element prediction | 0 | 0 | 0.03 | 0.06 | 0.16 | 0.59 | 0.95 | 0.99 | 0.95 | 0.88 | 0.71 | 0.88 | 0.89 | 0.92 | 0.79 | 0.92 | 0.93 | 0.82 | 0.95 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) |
| 5. Optimized curved surfaces, 3.6 m wide, modulated arrays 3 periods, 30 cm deep 56.9 degrees | two-dimensional boundary element prediction | 56.9 | 0.05 | 0.31 | 0.74 | 0.76 | 0.7 | 0.68 | 0.85 | 0.88 | 0.92 | 0.95 | 0.94 | 0.89 | 0.94 | 0.96 | 0.95 | 0.99 | 0.97 | 0.99 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) |
| 5. Optimized curved surfaces, 3.6 m wide, modulated arrays 3 periods, 30 cm deep random | two-dimensional boundary element prediction | 0.15 | 0.3 | 0.5 | 0.64 | 0.74 | 0.79 | 0.9 | 0.94 | 0.89 | 0.86 | 0.91 | 0.93 | 0.95 | 0.94 | 0.94 | 0.95 | 0.96 | 0.97 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) | |
| 5. Optimized curved surfaces, 3.6 m wide, modulated arrays 6 periods, 20 cm deep normal | two-dimensional boundary element prediction | 0 | 0 | 0 | 0 | 0.01 | 0.02 | 0.04 | 0.14 | 0.61 | 0.81 | 0.94 | 0.8 | 0.78 | 0.68 | 0.84 | 0.6 | 0.84 | 0.78 | 0.86 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) |
| 5. Optimized curved surfaces, 3.6 m wide, modulated arrays 6 periods, 20 cm deep 56.9 degrees | two-dimensional boundary element prediction | 56.9 | 0.01 | 0.02 | 0.02 | 0.04 | 0.23 | 0.73 | 0.79 | 0.88 | 0.98 | 0.86 | 0.78 | 0.92 | 0.94 | 0.94 | 0.98 | 0.98 | 0.96 | 0.96 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) |
| 5. Optimized curved surfaces, 3.6 m wide, modulated arrays 6 periods, 20 cm deep random | two-dimensional boundary element prediction | 0.09 | 0.11 | 0.14 | 0.16 | 0.27 | 0.48 | 0.68 | 0.85 | 0.94 | 0.89 | 0.8 | 0.86 | 0.9 | 0.93 | 0.89 | 0.94 | 0.95 | 0.94 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) | |
| 5. Optimized curved surfaces, 3.6 m wide, modulated arrays 6 periods, 10 cm deep normal | two-dimensional boundary element prediction | 0 | 0 | 0 | 0 | 0.01 | 0.01 | 0.02 | 0.07 | 0.15 | 0.23 | 0.3 | 0.38 | 0.82 | 0.86 | 0.8 | 0.89 | 0.73 | 0.9 | 0.89 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) |
| 5. Optimized curved surfaces, 3.6 m wide, modulated arrays 6 periods, 10 cm deep 56.9 degrees | two-dimensional boundary element prediction | 56.9 | 0 | 0.01 | 0.01 | 0.03 | 0.11 | 0.15 | 0.2 | 0.24 | 0.67 | 0.71 | 0.77 | 0.81 | 0.82 | 0.89 | 0.96 | 0.97 | 1 | 0.99 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) |
| 5. Optimized curved surfaces, 3.6 m wide, modulated arrays 6 periods, 10 cm deep random | two-dimensional boundary element prediction | 0.01 | 0.03 | 0.04 | 0.09 | 0.15 | 0.2 | 0.25 | 0.31 | 0.5 | 0.62 | 0.73 | 0.84 | 0.89 | 0.92 | 0.95 | 0.94 | 0.95 | 0.96 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) | |
| 5. Optimized curved surfaces, 3.6 m wide, modulated arrays 6 periods, 5 cm deep normal | two-dimensional boundary element prediction | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0.01 | 0.02 | 0.03 | 0.04 | 0.13 | 0.49 | 0.62 | 0.8 | 0.9 | 0.93 | 0.9 | 0.91 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) |
| 5. Optimized curved surfaces, 3.6 m wide, modulated arrays 6 periods, 5 cm deep 56.9 degrees | two-dimensional boundary element prediction | 56.9 | 0 | 0 | 0 | 0.01 | 0.01 | 0.02 | 0.02 | 0.04 | 0.31 | 0.39 | 0.42 | 0.42 | 0.43 | 0.52 | 0.69 | 0.81 | 0.93 | 0.95 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) |
| 5. Optimized curved surfaces, 3.6 m wide, modulated arrays 6 periods, 5 cm deep random | two-dimensional boundary element prediction | 0 | 0.01 | 0.01 | 0.02 | 0.05 | 0.06 | 0.06 | 0.12 | 0.29 | 0.36 | 0.43 | 0.5 | 0.58 | 0.7 | 0.82 | 0.88 | 0.91 | 0.92 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) | |
| 7. Schroeder diffusers, 3.6 m wide N = 7 QRD, 6 periods, 0.2 m deep normal | two-dimensional boundary element prediction | 0 | 0 | 0.01 | 0.02 | 0.05 | 0.08 | 0.07 | 0.04 | 0.35 | 0.51 | 0.67 | 0.57 | 0.52 | 0.44 | 0.73 | 0.85 | 0.39 | 0.71 | 0.86 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) |
| 7. Schroeder diffusers, 3.6 m wide N = 7 QRD, 6 periods, 0.2 m deep 56.9 degrees | two-dimensional boundary element prediction | 56.9 | 0.04 | 0.06 | 0.12 | 0.26 | 0.41 | 0.17 | 0.16 | 0.71 | 0.75 | 0.84 | 0.71 | 0.51 | 0.74 | 0.91 | 0.83 | 0.79 | 0.67 | 0.93 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) |
| 7. Schroeder diffusers, 3.6 m wide N = 7 QRD, 6 periods, 0.2 m deep random | two-dimensional boundary element prediction | 0.12 | 0.15 | 0.19 | 0.27 | 0.36 | 0.3 | 0.25 | 0.69 | 0.78 | 0.72 | 0.69 | 0.51 | 0.66 | 0.86 | 0.82 | 0.69 | 0.7 | 0.88 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) | |
| 7. Schroeder diffusers, 3.6 m wide Optimized diffuser, modulated array, 6 periods, 8 wells/period, 0.17 m deep normal | two-dimensional boundary element prediction | 0 | 0 | 0.01 | 0.02 | 0.04 | 0.2 | 0.21 | 0.27 | 0.65 | 0.78 | 0.8 | 0.85 | 0.86 | 0.95 | 0.92 | 0.95 | 0.82 | 0.88 | 0.96 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) |
| 7. Schroeder diffusers, 3.6 m wide Optimized diffuser, modulated array, 6 periods, 8 wells/period, 0.17 m deep 56.9 degrees | two-dimensional boundary element prediction | 56.9 | 0.03 | 0.07 | 0.11 | 0.22 | 0.4 | 0.43 | 0.55 | 0.58 | 0.76 | 0.9 | 0.74 | 0.89 | 0.95 | 0.96 | 0.94 | 0.96 | 0.96 | 0.97 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) |
| 7. Schroeder diffusers, 3.6 m wide Optimized diffuser, modulated array, 6 periods, 8 wells/period, 0.17 m deep random | two-dimensional boundary element prediction | 0.09 | 0.14 | 0.18 | 0.25 | 0.36 | 0.48 | 0.55 | 0.68 | 0.82 | 0.89 | 0.83 | 0.87 | 0.93 | 0.94 | 0.93 | 0.9 | 0.91 | 0.94 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) | |
| 7. Schroeder diffusers, 3.6 m wide N = 7 PRD, 6 periods, 6 wells/period, 0.2 m deep normal | two-dimensional boundary element prediction | 0 | 0 | 0.01 | 0.02 | 0.05 | 0.04 | 0.14 | 0.19 | 0.14 | 0.32 | 0.81 | 0.65 | 0.69 | 0.88 | 0.88 | 0.97 | 0.98 | 0.97 | 0.42 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) |
| 7. Schroeder diffusers, 3.6 m wide N = 7 PRD, 6 periods, 6 wells/period, 0.2 m deep 56.9 degrees | two-dimensional boundary element prediction | 56.9 | 0.04 | 0.09 | 0.18 | 0.38 | 0.41 | 0.47 | 0.66 | 0.59 | 0.61 | 0.83 | 0.96 | 0.93 | 0.88 | 0.94 | 0.92 | 0.89 | 0.95 | 0.96 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) |
| 7. Schroeder diffusers, 3.6 m wide N = 7 PRD, 6 periods, 6 wells/period, 0.2 m deep random | two-dimensional boundary element prediction | 0.11 | 0.15 | 0.2 | 0.29 | 0.34 | 0.47 | 0.52 | 0.52 | 0.62 | 0.88 | 0.85 | 0.82 | 0.88 | 0.92 | 0.92 | 0.9 | 0.93 | 0.75 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) | |
| 7. Schroeder diffusers, 3.6 m wide Diffractal, 1 period, 3 orders of size, N = 7, 0.5 m deep normal | two-dimensional boundary element prediction | 0 | 0.16 | 0.45 | 0.28 | 0.39 | 0.7 | 0.85 | 0.87 | 0.83 | 0.73 | 0.79 | 0.89 | 0.86 | 0.96 | 0.96 | 0.89 | 0.84 | 0.91 | 0.9 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) |
| 7. Schroeder diffusers, 3.6 m wide Diffractal, 1 period, 3 orders of size, N = 7, 0.5 m deep 56.9 degrees | two-dimensional boundary element prediction | 56.9 | 0.3 | 0.74 | 0.76 | 0.63 | 0.67 | 0.64 | 0.84 | 0.7 | 0.77 | 0.87 | 0.92 | 0.77 | 0.89 | 0.93 | 0.92 | 0.95 | 0.89 | 0.96 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) |
| 7. Schroeder diffusers, 3.6 m wide Diffractal, 1 period, 3 orders of size, N = 7, 0.5 m deep random | two-dimensional boundary element prediction | 0.33 | 0.56 | 0.66 | 0.61 | 0.72 | 0.8 | 0.88 | 0.8 | 0.78 | 0.85 | 0.91 | 0.8 | 0.91 | 0.92 | 0.91 | 0.91 | 0.9 | 0.91 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) | |
| 7. Schroeder diffusers, 3.6 m wide Optimized diffuser, 6 period modulated array, 12 wells/period, 0.17 m deep normal | two-dimensional boundary element prediction | 0 | 0 | 0.01 | 0.01 | 0.03 | 0.14 | 0.2 | 0.5 | 0.78 | 0.82 | 0.84 | 0.92 | 0.81 | 0.89 | 0.87 | 0.84 | 0.92 | 0.92 | 0.94 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) |
| 7. Schroeder diffusers, 3.6 m wide Optimized diffuser, 6 period modulated array, 12 wells/period, 0.17 m deep 56.9 degrees | two-dimensional boundary element prediction | 56.9 | 0.04 | 0.08 | 0.13 | 0.24 | 0.5 | 0.7 | 0.67 | 0.9 | 0.92 | 0.92 | 0.95 | 0.88 | 0.91 | 0.96 | 0.97 | 0.99 | 0.98 | 0.98 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) |
| 7. Schroeder diffusers, 3.6 m wide Optimized diffuser, 6 period modulated array, 12 wells/period, 0.17 m deep random | two-dimensional boundary element prediction | 0.14 | 0.17 | 0.21 | 0.27 | 0.4 | 0.61 | 0.69 | 0.9 | 0.9 | 0.91 | 0.92 | 0.87 | 0.87 | 0.9 | 0.91 | 0.93 | 0.94 | 0.94 | Cox & D'Antonio 3e Table C.3, PDF pages 549-552 (printed pp. 492-495) |
References
Section titled “References”- Cox, T. J., & D'Antonio, P. (2017). Acoustic absorbers and diffusers: Theory, design and application (3rd ed.). CRC Press. https://doi.org/10.1201/9781315369211 Tables C.1 to C.3: the source of the rows of the catalogue of predicted scattering coefficients that cite it.