Ir al contenido

Informe de conformidad

Esta página cambió después de phonometry 4.0.0, la última versión publicada en PyPI, así que puede describir código que esa versión aún no tiene. Lo nuevo desde entonces figura en la sección Unreleased del registro de cambios.

El activo diferencial de phonometry no es la lista de funcionalidades sino la prueba que hay detrás: cada métrica se implementa a partir del texto de la norma que la rige, y un informe numérico de conformidad fija cada comprobación a una norma, un apartado o tabla, el valor esperado normativo y el valor que la biblioteca calcula realmente, con la desviación y un veredicto de cumple/no cumple.

El informe es un documento autogenerado que la CI regenera en cada pull request (la compilación falla si se desincroniza del código), de modo que siempre está en sincronía con el código que documenta este sitio. Cada fila de aquí abajo se compone en tiempo de compilación a partir de docs/conformance.json, el documento que escriben las propias comprobaciones; las mismas filas en forma de tabla plana están en docs/CONFORMANCE.md.

  • Clases de filtro: el veredicto de clase IEC 61260-1:2014 por arquitectura de filtro, con la atenuación relativa medida en la banda determinante, el límite de clase 1 que debe superar y el margen en dB.
  • Ponderaciones frecuenciales: desviaciones de A/C (IEC 61672-1 Tabla 3) y G (ISO 7196 A.3) respecto a las curvas nominales, juzgadas en la frecuencia determinante con la banda de tolerancia aplicable y el margen.
  • Las más cerca de su límite publicado: cada comprobación conoce el límite frente al que se la juzga, así que las diez que consumen la mayor fracción del suyo aparecen primero. Una fracción alta no es un fallo: es el margen con el que la comprobación cumple, y es lo que una tabla de tolerancias pregunta en realidad.
  • Una tabla de conformidad por dominio (niveles, psicoacústica, acústica de salas y de la edificación, potencia acústica, materiales, vibración, incertidumbre, …): la norma y el apartado, la magnitud, el valor normativo, el valor que calcula la biblioteca, el límite publicado, la desviación y qué parte del límite consume. Los valores esperados provienen de los ejemplos resueltos de las propias normas o de expresiones en forma cerrada sintetizadas a un resultado conocido.

Cada sección de dominio es plegable y permanece plegada mientras todas sus filas pasan; una sección con alguna fila fallida se abre sola. Cada guía cuyas normas comprueba un dominio enlaza la sección de ese dominio desde la línea que lleva bajo el título, con cuántas comprobaciones la verifican, y el enlace abre la sección. En pantallas estrechas las tablas anchas se desplazan lateralmente dentro de su propia caja.

El registro de comprobaciones vive en scripts/conformance_report.py y se ejecuta en local con make conformance, que escribe docs/conformance.json y compone docs/CONFORMANCE.md a partir de él. Los valores esperados se toman de las mismas tablas de referencia que exige la batería de tests, de modo que el informe y los tests no pueden discrepar en silencio. Esta página lee el documento ya versionado y nunca lo genera, y la CI falla si ese documento se desincroniza de una ejecución nueva de las comprobaciones.

Para la filosofía de diseño detrás de este enfoque, junto con un caso de estudio sobre la ponderación temporal de IEC 61672-1, consulta Por qué phonometry.

Volver a deducir las normas con este detalle también saca a la luz defectos de los propios documentos publicados: ejemplos resueltos que contradicen su articulado, constantes mal impresas, referencias cruzadas rotas. Cada caso confirmado, con su evidencia y lo que hace la biblioteca al respecto, está en el registro de erratas.

Datos de campo. Las filas de abajo comprueban la biblioteca frente a los valores que publica la propia norma. Tres guías van un paso más allá, a datos medidos que sus autores publicaron junto con los resultados que calculó su propio software: la respuesta al impulso de una capilla frente a los parámetros de sala de ISO 3382-1 que publicaron sus autores, un año de dos monitores de ruido de Dublín frente a los niveles anuales por periodo y el Lden del informe del ayuntamiento, y cinco pasos de vehículos grabados por un sonómetro de clase 1 frente a los niveles y la sonoridad que da su depósito. No son filas de este informe, porque aquello con lo que se comparan es la salida de otro programa y no el texto de una norma, pero cada uno corre dos veces en la CI: como test de oráculo y como fragmento de la guía cuyos valores impresos sujeta la comprobación de la documentación. Cada guía dice dónde se separan los dos programas y da la atribución y la licencia de los datos.

Marcas de veredicto.CumplePor diseñoCada marca acompaña a la palabra que tiene al lado, nunca la sustituye, y las siluetas se distinguen tanto como los colores, así que quien no separe los tonos las sigue diferenciando.

Fracción de la tolerancia publicada que consume cada comprobación. El 100 % cae justo en el límite y un guion significa que el apartado no fija tolerancia de dos lados para esa magnitud, así que no hay margen que gastar. Un valor alto no es un fallo: es el margen con el que se cumple, y nunca decide el veredicto, que se resuelve a precisión completa antes de redondear.

Las diez comprobaciones más cerca de su límite publicado

NormaMagnitudDesviaciónLímiteConsumido
ISO/TR 17534-3:2015 Table 3Ground-projected path length dp, m0.005 m±0.005 m100 %
DIN 4150-2:1999-06 Annex C, Example 5KB_FTr with hammer b) in the rest hours, Formula (5)-0.005±0.005100 %
DIN 4150-2:1999-06 Annex C, Example 8KB_FTm over the record with the passage maxima alone-0.0005±0.0005100 %
E DIN 4150-2:2023-08 Annex B, Table B.1KB_FTm,Zug of the metro north by Formula (5)-0.0005±0.0005100 %
Jarvis (1996) NPL CIRA(EXT) 010 Appendix B, folio 26Volume of the coupler of the example, v = pi r^2 L-0.00000000005 m³±0.00000000005 m³100 %
Long 2e Table 14.9 (worked duct-borne sheet, supply path)Fan to room, 8 octave bands -> 52/42/30/18/9/-2/-2/-1 dB at the receiver1 dB±1 dB100 %
ISO 11820:1996 Eq. (31) / VDI 2081 Blatt 2:2005-05 Tabelle 1, PDF page 12, folio 12The mean velocity in the passages of a splitter silencer carrying 16 000 m3/h, from the face velocity and the area ratio0.005 m/s±0.005 m/s100 %
E DIN 45672-3:2023-02 Annex C, Table C.1L_v at 4 Hz by Formula (1)-0.1 dB±0.1 dB100 %
ISO 11820:1996 Table 1The printed table is a rounded version of the logarithmic subtraction and departs from it by under 0.35 dB0.3491 dB±0.35 dB100 %
IEC 60268-16:2011 Annex MStep 2 printed intermediates: the measurement condition, row by row0.993±199 %

IEC 61260-1:2014 class per filter architecture

ArquitecturaVeredictoBanda determinanteAten. rel. medidaLímite clase 1Margen cl.1Margen cl.2
butterClass 1631 Hz+0.00 dB≥ -0.40 dB+0.400 dB+0.600 dB
cheby1Por diseño (passband ripple)10000 Hz+0.16 dB≥ +1.41 dB-1.245 dB-0.837 dB
cheby2Class 1631 Hz+0.00 dB≥ -0.40 dB+0.400 dB+0.600 dB
ellipPor diseño (passband ripple)10000 Hz+0.10 dB≥ +1.32 dB-1.218 dB-0.813 dB
besselPor diseño (soft rolloff)10000 Hz+9.82 dB≥ +10.62 dB-0.799 dB-0.045 dB

Frequency-weighting conformance

CurvafsDesv. máx. (informativa)Frec. determinanteDesviación allíBanda de toleranciaMargen
A48 kHz+0.050 dB @ 158 Hz1000 Hz+0.000 dB[-0.70, +0.70] dB+0.700 dB
A96 kHz+0.050 dB @ 158 Hz1000 Hz+0.000 dB[-0.70, +0.70] dB+0.700 dB
C48 kHz-0.049 dB @ 13 Hz1000 Hz+0.000 dB[-0.70, +0.70] dB+0.700 dB
G48 kHz+0.047 dB @ 1 Hz1 Hz+0.047 dB[-1.00, +1.00] dB+0.953 dB
Filters & weightings 19/19
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleIEC 61260-1:2014 Table 1 Octave-band filter class (butterworth, fs=48 kHz)class 1class 1 (margin +0.400 dB)-+0.400 dB-
CumpleIEC 61260-1:2014 Table 1 One-third-octave filter class (butterworth, fs=48 kHz)class 1class 1 (margin +0.400 dB)-+0.400 dB-
CumpleIEC 61260:1995 corroborado por ANSI S1.11:2004 Table 1 Class 0 (strictest) octave-band filter (butterworth, fs=48 kHz)class 0class 0 (margin +0.150 dB)-+0.150 dB-
CumpleIEC 61260:1995 4.5.3 and 5.4 Octave Butterworth bank (fs=48 kHz, 125 Hz to 4 kHz): largest |Delta B| of equations (13), (14) and (16) within the class 0 +/-0.15 dBclass 0 (|Delta B| <= 0.15 dB)class 0 (|Delta B| <= 0.050 dB)-+0.100 dB-
CumpleIEC 61260:1995 4.5.3 and 5.4 One-third-octave Butterworth bank (fs=48 kHz, 125 Hz to 4 kHz): largest |Delta B| of equations (13), (14) and (16) within the class 0 +/-0.15 dBclass 0 (|Delta B| <= 0.15 dB)class 0 (|Delta B| <= 0.050 dB)-+0.100 dB-
CumpleIEC 61260:1995 4.9 and 5.8 Octave Butterworth bank (fs=48 kHz, 125 Hz to 4 kHz): summed outputs of equation (19), lowest to highest mid-band frequency, within the class 0 +/-1.0 dBclass 0 (-1.0 dB <= Delta P <= +1.0 dB)class 0 (+0.000 dB to +0.164 dB)-+0.836 dB-
CumpleIEC 61260:1995 4.9 and 5.8 One-third-octave Butterworth bank (fs=48 kHz, 125 Hz to 4 kHz): summed outputs of equation (19), lowest to highest mid-band frequency, within the class 0 +/-1.0 dBclass 0 (-1.0 dB <= Delta P <= +1.0 dB)class 0 (+0.000 dB to +0.163 dB)-+0.837 dB-
CumpleIEC 61260:1995 equations (9) and (16) Ideal octave band, S = 24, N = 5S: filter integrated response of the trapezoidal sum equals its hand sum interval by interval (closed form)0.000899 dB0.000899 dB±1.00e-12 dB0 dB0.0 %
CumpleIEC 61260:1995 4.8 and 5.7 Tones at the decimated sampling frequency minus the nominal mid-band frequency of the 20 Hz and 200 Hz bands of the default one-third-octave bank (fs=48 kHz), run through the bank: band output at least the +75 dB of class 0 below the input2/2 band outputs2/2 band outputs±000.0 %
CumpleIEC 61260-1:2014 5.15 and Table 1 Default octave bank at fs=16 kHz graded at its input rate, alias images of the decimated bands included: class 1 on Table 1class 1class 1 (margin +0.400 dB)-+0.400 dB-
CumpleIEC 651:1979 Table V leído vía BS 5969:1981 Type 0 (strictest) A-weighting tolerance mask (fs=48 kHz)Type 0Type 0 (margin +0.650 dB)-+0.650 dB-
CumpleIEC 651:1979 Table V leído vía BS 5969:1981 Type 0 (strictest) C-weighting tolerance mask (fs=48 kHz)Type 0Type 0 (margin +0.667 dB)-+0.667 dB-
CumpleIEC 61260-1:2014 Table F.1 Formula (9) breakpoint mapping, b=3, Omega at G**(1/2)1.122021.12202±0.00001-0.0000015531 %
CumpleIEC 61672-1:2013 Table 3 A-weighting deviation vs class-1 limits (fs=48 kHz)deviation within limits @ 1000 Hz+0.000 dB in [-0.70, +0.70] dB-headroom +0.700 dB-
CumpleIEC 61672-1:2013 Table 3 C-weighting deviation vs class-1 limits (fs=48 kHz)deviation within limits @ 1000 Hz+0.000 dB in [-0.70, +0.70] dB-headroom +0.700 dB-
CumpleISO 7196:1995 Table 2 / A.3 G-weighting deviation vs +/-1 dB tolerance (fs=48 kHz)deviation within limits @ 1 Hz+0.047 dB in [-1.00, +1.00] dB-headroom +0.953 dB-
CumpleANSI S1.4:1983 Tables IV/V B-weighting (historical) deviation vs Type 0 limits (fs=48 kHz)deviation within limits @ 200 Hz-0.049 dB in [-0.70, +0.70] dB-headroom +0.651 dB-
CumpleIEC 61012:1990 Table 1 / 2.2 AU-weighting deviation vs separate-unit tolerances (fs=96 kHz)deviation within limits @ 158 Hz+0.051 dB in [-1.00, +1.00] dB-headroom +0.949 dB-
CumpleIEC 537:1976 (withdrawn) leído vía NASA CR-3406 Table SLD-I D-weighting response vs the published tabulated curve (fs=48 kHz)abs(response - table) <= 0.2 dB (0.45 dB at 1600/2500 Hz)-0.281 dB @ 2500 Hz (bound 0.45 dB)-headroom +0.169 dB-
Band-filter pattern evaluation and periodic tests (IEC 61260-2, IEC 61260-3) 36/36
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleIEC 61260-3:2016 Table C.1 One-third-octave test frequency Omega_k, k = -7 (below the mid-band, Formulas (1), (2))0.185460.18546±0.000010.0000017134 %
CumpleIEC 61260-3:2016 Table C.1 One-third-octave test frequency Omega_k, k = -6 (below the mid-band, Formulas (1), (2))0.327480.32748±0.00001-0.0000032765 %
CumpleIEC 61260-3:2016 Table C.1 One-third-octave test frequency Omega_k, k = -5 (below the mid-band, Formulas (1), (2))0.531430.53143±0.00001-0.0000034769 %
CumpleIEC 61260-3:2016 Table C.1 One-third-octave test frequency Omega_k, k = -4 (below the mid-band, Formulas (1), (2))0.772570.77257±0.000010.0000041783 %
CumpleIEC 61260-3:2016 Table C.1 One-third-octave test frequency Omega_k, k = -3 (below the mid-band, Formulas (1), (2))0.919580.91958±0.00001-0.0000032866 %
CumpleIEC 61260-3:2016 Table C.1 One-third-octave test frequency Omega_k, k = -2 (below the mid-band, Formulas (1), (2))0.947190.94719±0.000016.18e-81.2 %
CumpleIEC 61260-3:2016 Table C.1, C.2 One-third-octave test frequency Omega_k, k = -1 (below the mid-band, Formulas (1), (2))0.974020.97402±0.00001-0.0000013226 %
CumpleIEC 61260-3:2016 Table C.1 One-third-octave test frequency Omega_k, k = 0 (at the mid-band, Formulas (1), (2))11±0.0000100.0 %
CumpleIEC 61260-3:2016 Table C.1, C.2 One-third-octave test frequency Omega_k, k = +1 (above the mid-band, Formulas (1), (2))1.026671.02667±0.000010.0000043587 %
CumpleIEC 61260-3:2016 Table C.1 One-third-octave test frequency Omega_k, k = +2 (above the mid-band, Formulas (1), (2))1.055751.05575±0.000010.0000043286 %
CumpleIEC 61260-3:2016 Table C.1 One-third-octave test frequency Omega_k, k = +3 (above the mid-band, Formulas (1), (2))1.087461.08746±0.00001-0.0000031563 %
CumpleIEC 61260-3:2016 Table C.1 One-third-octave test frequency Omega_k, k = +4 (above the mid-band, Formulas (1), (2))1.294371.29437±0.000010.0000041082 %
CumpleIEC 61260-3:2016 Table C.1 One-third-octave test frequency Omega_k, k = +5 (above the mid-band, Formulas (1), (2))1.881731.88173±0.00001-0.0000023547 %
CumpleIEC 61260-3:2016 Table C.1 One-third-octave test frequency Omega_k, k = +6 (above the mid-band, Formulas (1), (2))3.053653.05365±0.000010.0000020641 %
CumpleIEC 61260-3:2016 Table C.1 One-third-octave test frequency Omega_k, k = +7 (above the mid-band, Formulas (1), (2))5.391955.39195±0.00001-0.0000013327 %
CumpleIEC 61260-3:2016 Table 1 Acceptance limits on relative attenuation, 8 frequency parameters x 2 classes32/32 cells32/32 cells±000.0 %
CumpleIEC 61260-1:2014 Table C.1 Example 1: deviation +1.7 dB, U 0.3 dB against +1.0; -1.2 dB and 0.5 dBNo: Deviation exceeds acceptance limitsNo: Deviation exceeds acceptance limits±000.0 %
CumpleIEC 61260-1:2014 Table C.1 Example 2: deviation +1.1 dB, U 0.3 dB against +1.0; -1.2 dB and 0.5 dBNo: Deviation exceeds acceptance limitsNo: Deviation exceeds acceptance limits±000.0 %
CumpleIEC 61260-1:2014 Table C.1 Example 3: deviation +1.0 dB, U 0.3 dB against +1.0; -1.2 dB and 0.5 dBYes: Deviation within acceptance limits AND uncertainty within maximum-permittedYes: Deviation within acceptance limits AND uncertainty within maximum-permitted±000.0 %
CumpleIEC 61260-1:2014 Table C.1 Example 4: deviation +0.0 dB, U 0.3 dB against +1.0; -1.2 dB and 0.5 dBYes: Deviation within acceptance limits AND uncertainty within maximum-permittedYes: Deviation within acceptance limits AND uncertainty within maximum-permitted±000.0 %
CumpleIEC 61260-1:2014 Table C.1 Example 5: deviation +0.0 dB, U 0.9 dB against +1.0; -1.2 dB and 0.5 dBNo: Deviation within acceptance limits BUT uncertainty exceeds maximum-permittedNo: Deviation within acceptance limits BUT uncertainty exceeds maximum-permitted±000.0 %
CumpleIEC 61260-1:2014 Table C.1 Example 6: deviation -0.5 dB, U 0.3 dB against +1.0; -1.2 dB and 0.5 dBYes: Deviation within acceptance limits AND uncertainty within maximum-permittedYes: Deviation within acceptance limits AND uncertainty within maximum-permitted±000.0 %
CumpleIEC 61260-1:2014 Table C.1 Example 7: deviation -1.2 dB, U 0.3 dB against +1.0; -1.2 dB and 0.5 dBYes: Deviation within acceptance limits AND uncertainty within maximum-permittedYes: Deviation within acceptance limits AND uncertainty within maximum-permitted±000.0 %
CumpleIEC 61260-1:2014 Table C.1 Example 8: deviation -1.3 dB, U 0.3 dB against +1.0; -1.2 dB and 0.5 dBNo: Deviation exceeds acceptance limitsNo: Deviation exceeds acceptance limits±000.0 %
CumpleIEC 61260-1:2014 Table C.1 Example 9: deviation -2.0 dB, U 0.3 dB against +1.0; -1.2 dB and 0.5 dBNo: Deviation exceeds acceptance limitsNo: Deviation exceeds acceptance limits±000.0 %
CumpleIEC 61260-1:2014 Table C.1 Example 10: deviation -2.0 dB, U 0.7 dB against +1.0; -1.2 dB and 0.5 dBNo: Deviation exceeds acceptance limits AND uncertainty exceeds maximum-permittedNo: Deviation exceeds acceptance limits AND uncertainty exceeds maximum-permitted±000.0 %
CumpleIEC 61260-2:2016 corroborado por IEC 61260-3:2016 Annex B, Formula (B.5) Swept output level L_c of a one-third-octave filter (Formula (17) of IEC 61260-1)107.97 dB107.97 dB±0.01 dB-0.001 dB20 %
CumpleIEC 61260-2:2016 corroborado por IEC 61260-3:2016 A.3.5, Formula (A.2) Standard uncertainty u_Lc of the swept output level0.057 dB0.057 dB±0.001 dB0.000385 dB77 %
CumpleIEC 61260-2:2016 corroborado por IEC 61260-3:2016 A.3.5 Expanded uncertainty of the test signal (k = 2)0.115 dB0.115 dB±0.001 dB-0.000230 dB46 %
CumpleIEC 61260-2:2016 corroborado por IEC 61260-3:2016 A.3.5 Expanded uncertainty read on a 0.1 dB display (k = 2)0.128 dB0.128 dB±0.001 dB0.000474 dB95 %
CumpleIEC 61260-2:2016 Formula (2) corroborado por IEC 61260-1:2014 Formulas (15), (16) Ideal octave band: Delta B = 10 lg(tanh(x/2)/(x/2)), x = ln G / (bS), S = 24 (closed form)-0.0003 dB-0.0003 dB±1.00e-12 dB0 dB0.0 %
CumpleIEC 61260-2:2016 Formula (3) Ideal bank: summed outputs restore the input inside a band and on its edges (closed form)0 dBmax |Delta P| below 1e-12 dB±1.00e-12 dB0 dB0.0 %
CumpleIEC 61260-1:2014 5.12.2 corroborado por IEC 61260-2:2016 7.2.3 One-third-octave Butterworth bank (fs=48 kHz): largest |Delta B| within the class 1 +/-0.4 dBclass 1 (|Delta B| <= 0.4 dB)class 1 (|Delta B| <= 0.049 dB)-+0.351 dB-
CumpleIEC 61260-1:2014 5.16 corroborado por IEC 61260-2:2016 7.2.4 One-third-octave Butterworth bank (fs=48 kHz): summed outputs within the class 1 +0.8/-1.8 dBclass 1 (-1.8 dB <= Delta P <= +0.8 dB)class 1 (+0.000 dB to +0.248 dB)-+0.552 dB-
CumpleIEC 61260-1:2014 5.14.3 corroborado por IEC 61260-2:2016 7.4 One-third-octave multirate bank swept at 2 and 5 s per decade: |L_out - L_c| within class 1 +/-0.4 dBclass 1 (|L_out - L_c| <= 0.4 dB)class 1 (|L_out - L_c| <= 0.049 dB)-+0.351 dB-
CumpleIEC 61260-1:2014 Annex G, G.2.8 Swept deviation of a time-invariant band equals its effective bandwidth deviation0 dBmax |(L_out - L_c) - Delta B| 0.0001 dB±0.01 dB0.0001 dB1.0 %
Humid air (IEC 61094-2:2009 Annex F) 3/3
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleIEC 61094-2:2009 Table F.1 Set A (23 C, 101 325 Pa, 50 % RH): rho, c0, kappa, eta and alpha_t, as a fraction of the rounding of the last printed figure00.549±10.54955 %
CumpleIEC 61094-2:2009 Table F.1 Set B (20 C, 80 000 Pa, 65 % RH): rho, c0, kappa, eta and alpha_t, as a fraction of the rounding of the last printed figure00.96±10.9696 %
CumpleIEC 61094-2:2009 Formula (F.5) Thermal conductivity and specific heat capacity close the printed thermal diffusivity, alpha_t = k_a / (rho C_P)0.000021153 m²/s0.000021153 m²/s±1e-10%0 m²/s0.0 %
Sea water (Ainslie 2010) 3/3
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleAinslie:(2010) Eq. (4.6), printed folio 127 Density of the standard ocean: 10 C, salinity 35, at the surface1027 kg/m³1027.0439 kg/m³±0.5 kg/m³0.0439 kg/m³8.8 %
CumpleAinslie:(2010) Eq. (4.11), printed folio 128 Absolute static pressure at the surface is one atmosphere, not zero101989.16 Pa101989.16 Pa±0.00000100 Pa0 Pa0.0 %
CumpleAinslie:(2010) Eq. (4.6) vs printed folio 177 The pressure term the book's own folio 177 drops: 4.3e-7 per pascal times one atmosphere0.0438549 kg/m³0.0438549 kg/m³±1.00e-12 kg/m³0 kg/m³0.0 %
Levels & dosimetry 29/29
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleIEC 61672-1:2013 (Leq) Leq of a 1 Pa 1 kHz sine90.97 dB90.969 dB±0.05 dB-0.001 dB2.0 %
CumpleIEC 61252:1993 (LEX,8h) 8 h exposure to 90 dB(A) noise90 dB89.999 dB±0.05 dB-0.001 dB2.0 %
CumpleISO 1996-1:2016 3.6.4 Lden, constant 60 dB in day/evening/night66.3952 dB66.3952 dB±0.00000100 dB0 dB0.0 %
CumpleISO 1996-2:2007 Annex C.5 Example 1 Tonal audibility ΔLta (Formula C.3), 4 kHz tone13.7 dB13.66 dB±0.05 dB-0.044 dB88 %
CumpleISO 1996-2:2007 Annex C.5 Example 1 Tonal adjustment Kt (Formulae C.4-C.6)6 dB6 dB±1.00e-9 dB0 dB0.0 %
CumpleISO 1996-2:2017 Annex G.2 Combined measurement uncertainty u = √(Σ(cj·uj)²)2.18 dB2.18 dB±0.01 dB-0.002 dB20 %
CumpleRD 1367/2007 Annex IV A.3.4.2 b Corrected period level LKeq,d (Manual Ejemplo 3.1: 3 noise phases, 12 h)57 dB57 dB±1.00e-9 dB0 dB0.0 %
CumpleRD 1367/2007 Annex I A.2 d Long-term level LK,d (Manual Ejemplo 3.2: 303 operating days of 365)56 dB56 dB±1.00e-9 dB0 dB0.0 %
CumpleRD 1367/2007 Annex III Table B1, Article 25 Activity verdict (Manual Ejemplo 3.3: area type a, LK,d 56 dB over 55 dB)phase and daily pass, annual fails, activity not compliantphase and daily pass, annual fails, activity not compliant---
CumpleISO 1683:2015 Table 1 Reference sound pressure, air and other gases (20 µPa)20 µPa = 2e-05 Pa2e-05 Pa (20 µPa)±0 Pa0 Pa0.0 %
CumpleISO 1683:2015 Table 1 Reference sound exposure, air and other gases ((20 µPa)² s)(20 µPa)² s = 4e-10 Pa²·s4e-10 Pa²·s ((20 µPa)² s)±0 Pa²·s0 Pa²·s0.0 %
CumpleISO 1683:2015 Table 1 Reference sound power, air and other gases (1 pW)1 pW = 1e-12 W1e-12 W (1 pW)±0 W0 W0.0 %
CumpleISO 1683:2015 Table 1 Reference sound energy, air and other gases (1 pJ)1 pJ = 1e-12 J1e-12 J (1 pJ)±0 J0 J0.0 %
CumpleISO 1683:2015 Table 1 Reference sound intensity, air and other gases (1 pW/m²)1 pW/m² = 1e-12 W/m²1e-12 W/m² (1 pW/m²)±0 W/m²0 W/m²0.0 %
CumpleISO 1683:2015 Table 2 Reference sound pressure, water and other liquids (1 µPa)1 µPa = 1e-06 Pa1e-06 Pa (1 µPa)±0 Pa0 Pa0.0 %
CumpleISO 1683:2015 Table 2 Reference sound exposure, water and other liquids (1 µPa² s)1 µPa² s = 1e-12 Pa²·s1e-12 Pa²·s (1 µPa² s)±0 Pa²·s0 Pa²·s0.0 %
CumpleISO 1683:2015 Table 2 Reference sound power, water and other liquids (1 pW)1 pW = 1e-12 W1e-12 W (1 pW)±0 W0 W0.0 %
CumpleISO 1683:2015 Table 2 Reference sound energy, water and other liquids (1 pJ)1 pJ = 1e-12 J1e-12 J (1 pJ)±0 J0 J0.0 %
CumpleISO 1683:2015 Table 2 Reference sound intensity, water and other liquids (1 pW/m²)1 pW/m² = 1e-12 W/m²1e-12 W/m² (1 pW/m²)±0 W/m²0 W/m²0.0 %
CumpleISO 1683:2015 Table 2 Reference sound particle displacement, liquids (1 pm)1 pm = 1e-12 m1e-12 m (1 pm)±0 m0 m0.0 %
CumpleISO 1683:2015 Table 2 Reference sound particle velocity, liquids (1 nm/s)1 nm/s = 1e-09 m/s1e-09 m/s (1 nm/s)±0 m/s0 m/s0.0 %
CumpleISO 1683:2015 Table 2 Reference sound particle acceleration, liquids (1 µm/s²)1 µm/s² = 1e-06 m/s²1e-06 m/s² (1 µm/s²)±0 m/s²0 m/s²0.0 %
CumpleISO 1683:2015 Table 2 Reference distance for compound quantities, liquids (1 m)1 m1 m±0 m0 m0.0 %
CumpleISO 1683:2015 Table 3 Reference vibratory displacement (1 pm)1 pm = 1e-12 m1e-12 m (1 pm)±0 m0 m0.0 %
CumpleISO 1683:2015 Table 3 Reference vibratory velocity (1 nm/s)1 nm/s = 1e-09 m/s1e-09 m/s (1 nm/s)±0 m/s0 m/s0.0 %
CumpleISO 1683:2015 Table 3 Reference vibratory acceleration (1 µm/s²)1 µm/s² = 1e-06 m/s²1e-06 m/s² (1 µm/s²)±0 m/s²0 m/s²0.0 %
CumpleISO 1683:2015 Table 3 Reference vibratory force (1 µN)1 µN = 1e-06 N1e-06 N (1 µN)±0 N0 N0.0 %
CumpleISO 1683:2015 Table 3, note b Alternative vibratory velocity for structure-borne sound (50 nm/s)50 nm/s = 5e-08 m/s5e-08 m/s (50 nm/s)±0 m/s0 m/s0.0 %
CumpleISO 1683:2015 Table 2, note b Level re 1 µPa minus level re 20 µPa, 10 lg(20²/1²), printed ≈ 26.0 dB26 dB26.02 dB±0.05 dB0.021 dB42 %
Room & building acoustics 160/160
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleCTE DB-HR Annex A, Formula (A.14) Global index R'A for pink noise (Manual Ejemplo 7.2)51.4 dBA51.4 dBA±0.05 dBA0 dBA0.0 %
CumpleCTE DB-HR Annex A, Formula (A.6) Global index D2m,nT,Atr for road traffic (Manual Ejercicio 7.1)32.8 dBA32.8 dBA±0.05 dBA0 dBA0.0 %
CumpleManual de acústica ambiental y arquitectónica Ejemplo 7.1 Reported R'A of the field-test wall (printed 51 dBA = R'w 52 + C -1)51 dBA51 dBA±1.00e-9 dBA0 dBA0.0 %
CumpleManual de acústica ambiental y arquitectónica Ejemplo 7.1 Reported R'A,tr of the same wall (printed 47 dBA = R'w 52 + Ctr -5)47 dBA47 dBA±1.00e-9 dBA0 dBA0.0 %
CumpleCTE Catálogo de Elementos Constructivos Window size correction of RA (Manual Ejemplo 7.4: 4 m2 window, -2 dB)24 dBA24 dBA±1.00e-9 dBA0 dBA0.0 %
CumpleISO 3382-2:2008 5.3.3 T30 from a synthetic exponential decay (T=1.0 s)1 s1 s±1%-4.65e-11 s0.0 %
CumpleISO 3382-1:2009 Annex A (informative) Eq. (A.1) Sound strength of a response scaled against its free-field reference6.0206 dB6.0206 dB±1.00e-9 dB0 dB0.0 %
CumpleISO 3382-1:2009 Annex A (informative) Eq. (A.2) Sound pressure exposure level of a 1 Pa burst held for 0.5 s90.9691 dB90.9691 dB±1.00e-9 dB0 dB0.0 %
CumpleISO 3382-1:2009 Annex A (informative) A.2.1 A calibration shared by both responses cancels out of G0 dB shift (+/-1e-09 dB)max shift over 6 bands below 1e-12 dB±1.00e-9 dB0 dB0.0 %
CumpleISO 3382-1:2009 Annex A (informative) Eqs. (A.4)/(A.8) Free-field reference referred from 5 m to 10 m-6.0206 dB-6.0206 dB±1.00e-12 dB0 dB0.0 %
CumpleISO 3382-1:2009 Annex A (informative) Eq. (A.5) Reverberation-room reference level, A = 0.16 V/T = 10 m253 dB53 dB±1.00e-12 dB0 dB0.0 %
CumpleISO 3382-1:2009 Annex A (informative) Eqs. (A.5)/(A.9) The two printed routes to G span the 0.0206 dB their integers force0.0206 dB0.0206 dB±1.00e-12 dB0 dB0.0 %
CumpleISO 3382-1:2009 Annex A (informative) A.2.1 note Energy mean of a cosine directivity over a full turn-3.0103 dB-3.0103 dB±1.00e-12 dB0 dB0.0 %
CumpleISO 3382-1:2009 Annex A (informative) Eq. (A.14) Early lateral energy fraction of one reflection at 45 degrees0.10.1±1.00e-1200.0 %
CumpleISO 3382-1:2009 Annex A (informative) Eq. (A.15) Cosine-weighted lateral fraction of two mirror-image reflections0.2357020.235702±1.00e-1200.0 %
CumpleISO 3382-1:2009 Annex A (informative) Eq. (A.16) Late lateral sound level of one arrival past the early window-12.0412 dB-12.0412 dB±1.00e-9 dB0 dB0.0 %
CumpleISO 3382-1:2009 Annex A (informative) Eq. (A.17) Energy average of the four late lateral octave bands2.43038 dB2.43038 dB±1.00e-12 dB0 dB0.0 %
CumpleISO 3382-1:2009 Annex B (informative) Eqs. (B.1)/(B.2) Interaural correlation of two channels in anti-phaseIACC = 1; min IACF = -1IACC = 1; min IACF = -1±000.0 %
CumpleISO 3382-1:2009 Annex C (informative) Eqs. (C.1)/(C.2) Stage support of one arrival in each printed windowST_Early = -13.9794 dB; ST_Late = -20 dBST_Early = -13.9794 dB; ST_Late = -20 dB±0 dB0 dB0.0 %
CumpleISO 3382-1:2009 C.2.4 The two printed stage-support standard deviations close on 12 readings0.3 dB1 dB / sqrt(12) = 0.2887 dB -> 0.3 dB±1.00e-12 dB0 dB0.0 %
CumpleISO 3382-1:2009 Eq. (5) Standard deviation of T30, 2 s in the 1 kHz octave, n = 10, N = 120.00904449 s0.00904449 s±1.00e-12 s0 s0.0 %
CumpleISO 3382-1:2009 Eqs. (4)/(5) The two evaluation ranges differ by the printed 0.88/0.55 and decay terms1.626174791.62617479±1.00e-1200.0 %
CumpleISO 3382-1:2009 Eqs. (6)/(7) Shortest reliable decay time of a 125 Hz octave forward analysis0.180282 s0.180282 s±1.00e-12 s0 s0.0 %
CumpleISO 3382-1:2009 Table A.1 The single number of each quantity averages the bands the table namesG_m = 0.45; J_LFm = 0.35G_m = 0.45; J_LFm = 0.35±000.0 %
CumpleISO 3382-1:2009 Table A.1 footnote a Only the late lateral level is energy averaged, and it differs-3.532403 dB-3.5324 dB, against -6.5000 dB arithmetic±1.00e-12 dB0 dB0.0 %
CumpleISO 3382-1:2009 Table A.2 Minimum receiver positions at the three printed hall sizes500 seats = 6; 1000 seats = 8; 2000 seats = 10500 seats = 6; 1000 seats = 8; 2000 seats = 10±000.0 %
CumpleISO 3382-1:2009 4.2.1 A gliding directivity survey references the whole-turn energy mean1 (+/-1e-09)1±0.00000000100.0 %
CumpleISO 3382-1:2009 Clause 9.1 A one-third-octave fiche averages the six bands, not two of themband 1 = 400 Hz; band 2 = 500 Hz; band 3 = 630 Hz; band 4 = 800 Hz; band 5 = 1000 Hz; band 6 = 1250 Hzband 1 = 400 Hz; band 2 = 500 Hz; band 3 = 630 Hz; band 4 = 800 Hz; band 5 = 1000 Hz; band 6 = 1250 Hz±0 Hz0 Hz0.0 %
CumpleISO 18233:2006 (swept-sine method) Sweep deconvolution recovers a known IIR response0 dB in-band error (+/-0.1 dB)0.0006 dB±0.1 dB0.0006 dB0.6 %
CumpleISO 717-1 Annex C, Table C.1 Weighted sound reduction index Rw (C;Ctr)Rw 30 (C -2; Ctr -3)Rw 30 (C -2; Ctr -3), unfavourable sum 31.8 dB±000.0 %
CumpleISO 717-1:2020 Annex C, Table C.2 Enlarged range 50-5000 Hz: Rw (C; Ctr; C50-5000; Ctr,50-5000)Rw 30 (C -2; Ctr -3; C50-5000 -2; Ctr,50-5000 -4)Rw 30 (C -2; Ctr -3; C50-5000 -2; Ctr,50-5000 -4)-exact-
CumpleISO 717-2 Annex C, Table C.1 Weighted impact sound pressure level Ln,w (CI)Ln,w 79 (CI -11; sum 28.0 dB)Ln,w 79 (CI -11; sum 28.0 dB)-+0 dB-
CumpleISO 717-2 Annex C, Table C.1 (covered) Weighted impact level of the floor WITH covering Ln,w (CI)Ln,w 64 (CI -3; sum 30.0 dB)Ln,w 64 (CI -3; sum 30.0 dB)-+0 dB-
CumpleISO 717-2 Annex C, Table C.2 Floor-covering improvement ΔLw and CI,Δ (Formulae (2)/(A.4); CI,Δ from the normative Table 4 floor, not the 2020 print's misprinted C.2 chain)ΔLw 15 dB; CI,Δ -9 dB (Table 4 reference floor)ΔLw 15 dB; CI,Δ -9 dB-+0 dB-
CumpleISO 354:2003 Eq. 5/8 Sabine inversion recovers absorption area9.212828 m²9.212828 m²±1.00e-9 m²0 m²0.0 %
CumpleISO 3382-3:2012 Clause 6.2 Open-plan spatial decay rate D2,S (-6 dB/doubling)6 dB6 dB±1.00e-9 dB0 dB0.0 %
CumpleISO 16283-3:2016 Clause 3.12 Facade R'45 isolates the -1.5 dB incidence correction (S=A)38.5 dB38.5 dB±1.00e-9 dB0 dB0.0 %
CumpleISO 16283-1:2014 Clause 8.1 corroborado por ISO 16283-2:2020 Clause 8.1 corroborado por ISO 16283-3:2016 Clause 7.3.1 Low-frequency trigger: V < 25 m³ to the nearest cubic metre7/7 room volumes on either side of 25 m³7/7 room volumes on either side of 25 m³±000.0 %
CumpleISO 16283-1:2014 Clause 5 corroborado por ISO 16283-2:2020 Clause 5.1 corroborado por ISO 16283-3:2016 Clause 5 Low-frequency band set is 50 Hz, 63 Hz and 80 Hzband 1 = 50 Hz; band 2 = 63 Hz; band 3 = 80 Hzband 1 = 50 Hz; band 2 = 63 Hz; band 3 = 80 Hz±0 Hz0 Hz0.0 %
CumpleISO 16283-1:2014 Formula (12) corroborado por ISO 16283-2:2020 Formula (15) Corner level is the highest corner per band, energy-averaged over qFormula (12) over q = 2 positions (closed form)max deviation 0.000000000 dB±0.000000001 dB0 dB0.0 %
CumpleISO 16283-1:2014 Formula (13) corroborado por ISO 16283-2:2020 (16) corroborado por ISO 16283-3:2016 (5) L_LF combines the corner and default levels one third to two thirdsthe printed Formula (13) (closed form)max deviation 0.000000000 dB±0.000000001 dB0 dB0.0 %
CumpleISO 16283-1:2014 Formula (13) corroborado por ISO 16283-2:2020 (16) corroborado por ISO 16283-3:2016 (5) L_LF degenerates to L when the corner level equals itL_LF = L for L_Corner = L (closed form)max deviation 0.000000000000 dB±0.000000000001 dB0 dB0.0 %
CumpleISO 16283-1:2014 Formula (13) corroborado por ISO 16283-2:2020 (16) corroborado por ISO 16283-3:2016 (5) L_LF floor at 10 lg(2/3) below L as the corners fall silent48.239087 dB (+/-1e-09 dB, closed form)48.239087 dB±1.00e-9 dB0 dB0.0 %
CumpleISO 16283-1:2014 Formula (13) corroborado por ISO 16283-2:2020 (16) corroborado por ISO 16283-3:2016 (5) L_LF rises strictly with the corner level, over 80 dB of it400/400 steps rising with the corner level (closed form)400/400 steps rising with the corner level±000.0 %
CumpleISO 16283-1:2014 Clause 10.4 corroborado por ISO 16283-2:2020 Clause 10.4 corroborado por ISO 16283-3:2016 Clause 8.4 63 Hz octave T replaces exactly the 50 Hz, 63 Hz and 80 Hz bands5/5 reverberation-time bands5/5 reverberation-time bands±000.0 %
CumpleISO 16283-1:2014 (13) corroborado por ISO 16283-2:2020 (16) corroborado por ISO 16283-3:2016 (5) Airborne, impact and facade run one low-frequency implementation3/3 parts reaching the same L_LF3/3 parts reaching the same L_LF±000.0 %
CumpleISO 10140-2:2010 Formula (2) Lab airborne R on the ISO 717-1 reference shape -> Rw = 54Rw 54 dBRw 54 dB-+0 dB-
CumpleISO 717-1:2020 Annex E, Table E.1 Standard basic elements: printed Rw and eight adaptation terms of all three27/27 printed single numbers27/27 printed single numbers±000.0 %
CumpleISO 717-1:2020 Annex E, Table E.1 Standard basic elements to one decimal place (the printed values in parentheses)27/27 printed single numbers27/27 printed single numbers±000.0 %
CumpleISO 717-2:2020 Table 4 Reference floors: printed Ln,r,0,w (CI) of the heavyweight and both lightweight curves6/6 printed single numbers6/6 printed single numbers±000.0 %
CumpleISO 717-2:2020 Table 4 Reference floors to one decimal: 77.6 (-10.3), 71.8 (0.0) and 75.0 (-2.8)6/6 printed single numbers6/6 printed single numbers±000.0 %
CumpleISO 717-1:2020 Annex E, Table E.1 Standard basic elements: the 63 band values of the three curves as printed63/63 printed band values63/63 printed band values±000.0 %
CumpleISO 717-2:2020 Table 4 Reference floors: the 48 band values of the three printed columns, floors No 1 and No 2 both on the shared one48/48 printed band values48/48 printed band values±000.0 %
CumpleISO 717-1:2020 Annex D, Formulas (D.3) and (D.4) Lining on the heavy wall with Rref,with on the Table 3 shape + 20 dB -> ΔRw = 2121 dB21 dB±0 dB0 dB0.0 %
CumpleISO 717-2:2020 Clauses 5 and 6, Formulas (A.4) and (A.6) Sloped ΔL on each of the four reference floors -> ΔLw or ΔLt,n,w and CIΔ, rated independently: 20 (-10), 6 (-1), 6 (-1), 11 (-3)8/8 single numbers8/8 single numbers±000.0 %
CumpleISO 717-1:2020 Annex D, Formulas (D.3) and (D.4) Two non-flat ΔR on each standard element -> ΔRw, Δ(Rw + C), Δ(Rw + Ctr) and the six enlarged-range terms, rated independently54/54 single numbers54/54 single numbers±000.0 %
CumpleISO 717-1:2020 Formula (D.2) Direct differences of a sloped lining on a measured wall: ΔRw,direct = 6, Δ(Rw + C)direct = 5, Δ(Rw + Ctr)direct = 36 dB / 5 dB / 3 dB6 dB / 5 dB / 3 dB-exact-
CumpleISO 10140-1:2021 Formula (H.1) ISO 717-2 Table C.2 improvement through the Annex H front end -> ΔLw = 15 as printed, CIΔ = -9 from the Table 4 floor (the print's C.2 chain gives -8)ΔLw = 15 dB, CIΔ = -9 dBΔLw = 15 dB, CIΔ = -9 dB-exact-
CumpleISO 10140-1:2021 G.4 Curing example: two measurements within 1 d may start 3 d after construction; on the same bound, 2.1 d after 6.3 d passes too3 d passes, 2.9 d fails, 6.3 d with 2.1 d passes3 d passes, 2.9 d fails, 6.3 d with 2.1 d passes-exact-
CumpleISO 10140-1:2021 Table K.2 The 18 C_j are the IEC 61672-1 A-weighting at the exact midband frequencies of the nominal bands, to 0.1 dB18/18 bands18/18 bands±000.0 %
CumpleISO 10140-1:2021 Formula (K.2) with Table K.2 Flat LI = 50 dB in the 18 bands -> LIA = 50 + 10 lg sum 10^(0.1 C_j), printed C_j60.997267 dB60.997267 dB±1.00e-12 dB0 dB0.0 %
CumpleISO 10140-1:2021 Formula (K.1) Rain in a 100 m³ room, T = 2 s, Se = 4 m²: LI = Lpr - 10 lg 2 + 10 lg 100 - 14 - 10 lg 456.9691 dB56.9691 dB±1.00e-12 dB0 dB0.0 %
CumpleISO 10140-1:2021 Formula (K.4) Direct intensity over Sm = 4 m² of a 1 m² specimen: LI = LIm + 10 lg 456.0206 dB56.0206 dB±1.00e-12 dB0 dB0.0 %
CumpleISO 10140-1:2021 Formula (J.1) A 5.4 m joint, L1 - L2 = 37 dB over A = 8 m2: Rs = 37 + 10 lg(1 m2 x 5.4 m / (8 m2 x 1 m))35.293038 dB35.293038 dB±1.00e-12 dB0 dB0.0 %
CumpleISO 10140-1:2021 Formula (J.2) resuelto con ISO 10140-2:2021 A.3 The fixed 1.3 dB below a 6 dB margin over Rs,max is Formula (J.2) at 6 dB, to the printed decimal1.3 dB at and below a 6 dB marginFormula (J.2) at 6 dB 1.3 dB, applied below 1.3 dB-exact-
CumpleISO 10140-1:2021 J.1 R's within 3 dB of Rs,max = 50.4 dB: the lower limit as printed, (Rs >= 50.4 dB)(Rs >= 50.4 dB)Rs = 50.4 dB, a minimum value-exact-
CumpleISO 10140-1:2021 J.1 resuelto con ISO 717-1:2020 4.4 and 4.5 Indicative bands 400 Hz to 800 Hz rated again as infinitely high, by hand: Rs,w = 51 dB becomes 59 dB with C = 0 dB, more than 1 dB, so in bracketsRs,w = 51 dB; opened 59 dB, C = 0 dB; in bracketsRs,w = 51 dB; opened 59 dB, C = 0 dB; in brackets-exact-
CumpleISO 10140-2:2021 Table A.1 The printed R'F of the small test opening, carried through the joint front end uncorrected: R'F,w (C; Ctr) = 59 (-2; -7) dB as printedRw = 59 dB; C = -2 dB; Ctr = -7 dBRw = 59 dB; C = -2 dB; Ctr = -7 dB±0 dB0 dB0.0 %
CumpleISO 10140-1:2021 J.2.1, J.2.2 Joint longer than 1 m (1 m fails), at most 50 mm wide (50 mm passes), a window or door gap at least 5.0 m (5.0 m passes); four gap readings within 0.3 mm8/8 bounds8/8 bounds±000.0 %
CumpleISO 10140-1:2021 J.4 A variable slit at bmin, bn = 5 mm (taken when unknown) and bn + 3 = 8 mm passes; without 8 mm, without bmin named, or at 6 mm nominal without 9 mm it fails5/5 series5/5 series±000.0 %
CumpleISO 10140-5:2021 Table I.1 Reference pane: the 36 cells, 10 lg(ηref) and LIc,ref in 18 bands, as printed36/36 printed cells36/36 printed cells±000.0 %
CumpleISO 10140-5:2021 Annex I, Formulas (I.1) to (I.3) Reference pane at twice the reference loss factor and at the printed LIc,ref: ΔLIc = 10 lg 2 in all 18 bands18/18 bands18/18 bands±000.0 %
CumpleISO 10140-5:2021 Tables H.1 and H.2 Intense and heavy rain: rate, drop diameter, fall velocity, holes, hole density and fall height as printed12/12 printed cells12/12 printed cells±000.0 %
CumpleISO 10140-1:2021 Table K.1 Moderate, intense, heavy and cloudburst rain: rate, drop diameter and fall velocity ranges as printed12/12 printed cells12/12 printed cells±000.0 %
CumpleISO 10140-5:2021 H.1 Heavy rain of Table H.1, 40 mm/h, within the ±2 mm/h of the H.1 text: 38 and 42 pass, and 38 collected as 3.8 L on 0.1 m² in one hour; 37.9 and 42.1 failpass, pass, pass, fail, failpass, pass, pass, fail, fail-exact-
CumpleISO 15186-1:2000 Formula (7) Intensity RI on the ISO 717-1 reference shape -> RI,w = 30RI,w 30 dB (scalar anchor RI = 34 dB)RI,w 30 dB (RI = 34 dB)-+0 dB-
CumpleISO 15186-1:2000 Annex B, Table B.1 Adaptation term Kc: all 21 printed rows; (B.1) reduces to (B.2)max abs(Kc - Table B.1) <= 0.05 dB (1 dp print)0.047 dB (B.1 vs B.2: 4.33e-04 dB)-0.047 dB-
CumpleISO 15186-3:2002 Annex A, Table A.1 Limp-panel qualification: the printed plaster-board columnmax abs(R - Table A.1) <= 0.05 dB (1 dp print)0.050 dB over 50 Hz to 160 Hz-0.050 dB-
CumpleISO 15186-3:2002 Formula (7) Low-frequency RI subtracts 9 dB, three more than part 1RI = 15 dB, 3 dB below part 1; FpI = 8 dB qualifies at 10 not 6RI = 15 dB, part 1 - part 3 = 3 dB-+0.000 dB-
CumpleISO 15186-3:2002 Clause 3.9, Formula (8) Low-frequency DI,n,e; the series' own +10 lg N signDI,n,e = 21 dB; N = 4 adds 6.021 dB21 dB; N = 4 adds 6.021 dB-below 1e-12 dB-
CumpleISO 10052:2021 Clause 3.6 Survey R' applies the V/7.5 minimum-area rule26.197888 dB26.197888 dB±1.00e-9 dB0 dB0.0 %
CumpleISO 10052:2021 Clause 3.16 Service-equipment LXY is the 3-position energy average32.823329 dB32.823329 dB±1.00e-9 dB0 dB0.0 %
CumpleISO 10052:2021 Table 4 Reverberation-index estimate (35 <= V < 60, type g)k = [4.5, 5.0, 5.5, 5.5, 5.5] dBk = [4.5, 5.0, 5.5, 5.5, 5.5] dB-exact-
CumpleISO 717-2:2020 Table 4 / Clause 5.2 Reference-floor weighted level Ln,r,0,w and CI (ISO 16251-1 ΔLw anchor)Ln,r,0,w = 78 dB, CI = -11 dBLn,r,0,w = 78 dB, CI = -11 dB-exact-
CumpleISO 16251-1:2014 corroborado por ISO 717-2 Formula (2) Floor-covering ΔLw: zero improvement gives ΔLw = 0ΔLw = 0 dB (ΔL = 0 -> Ln,r = Ln,r,0)ΔLw = 0 dB-exact-
CumpleISO 16251-1 corroborado por ISO 717-2 nombra además Foret et al.:2011 carpet Measured textile-carpet improvement rates to ΔLw = 29 dBΔLw = 29 dB (paper, ISO 16251-1)ΔLw = 29 dB-+0 dB-
CumpleISO 10848-1:2006 Formula (14) Flanking Kij (simplified) matches closed formKij = 1.9897 dBKij = 1.9897 dB-exact-
CumpleISO 10848-1:2006 Formula (12) Flanking equivalent absorption length aj at f_refaj = 1.2661 maj = 1.2661 m-exact-
CumpleISO 10848-1:2006 Clause 7.3.1 Flanking total loss factor η = 2.2/(f·Ts)η = 0.0044η = 0.0044-exact-
CumpleISO 12354-1:2017 Formula (20) comparado con Hopkins Eq. 2.201 (6 mm glass) Flanking critical frequency (c0²/1.8·cL·h) vs plate coincidence (c0²/2π · sqrt(m''/B'))2107.4 Hz2123.5 Hz±1%16.156 Hz77 %
CumpleEN 29052-1:1992 Formula 4 Apparent dynamic stiffness s't = 4π²·m't·fr² (m't=200 kg/m², fr=25 Hz)4.934802 MN/m³4.934802 MN/m³±0.000001 MN/m³0 MN/m³0.0 %
CumpleEN 29052-1:1992 clause 8.2 NOTE Enclosed-gas stiffness s'a·d = 111 MN·mm/m³ (p₀=0.1 MPa, ε=0.9)5.55556 MN/m³5.55556 MN/m³±0.0001 MN/m³5.56e-9 MN/m³0.0 %
CumpleEN 29052-1:1992 Formula 2 Floating-floor natural frequency f0 = (1/2π)√(s'/m') (s'=10 MN/m³, m'=100 kg/m²)50.32921 Hz50.32921 Hz±0.00000100 Hz0 Hz0.0 %
CumpleISO 7626-1:2011 Table 1 / 3.1.2 Closed-form SDOF driving-point mobility peak mag(Y(f0)) = 1/c (c=5 N·s/m)0.2 m/(N·s)0.2 m/(N·s)±0.000001 m/(N·s)0 m/(N·s)0.0 %
CumpleISO 7626-1:2011 Table 1 / 3.1.2 Closed-form SDOF static receptance H(0) = 1/k (k=8000 N/m)0.000125 m/N0.000125 m/N±0.0001%0 m/N0.0 %
CumpleISO 7626-1:2011 Table 1 FRF reciprocity: impedance × mobility = 1 (at 37 Hz)1 (= Z·Y)1±1.00e-900.0 %
CumpleISO 717-2:2020 Table D.4 A-weighted maximum impact level LiA,Fmax of the Annex D worked example55.350 66... dB (rated 55 dB)55.350668 dB±0.0001 dB0.000001 dB1.0 %
CumpleISO 16283-2:2020 Table A.1 corroborado por JIS A 1418-2:2019 Table A.2 Rubber-ball impact force exposure level LFE, five octave bands39,0 / 31,0 / 23,0 / 17,0 / 12,5 dB re 1 N at 31.5 to 500 Hz39 / 31 / 23 / 17 / 12.5 dB re 1 N-max |dev| 0.000 dB-
CumpleISO 16283-2:2020 Formulae (4), (5), (6) Standardized maximum impact level reduces to 10 lg(V/V0) at T = T073.0103 dB (= 70 + 10 lg(100/50))73.0103 dB±1.00e-9 dB0 dB0.0 %
CumpleASTM E413-22 clause 5 nombra además ASTM E1414 CAC Ceiling attenuation class of two accredited E1414 test reportsCAC 34 (ALA 16-091-4); CAC 25, sum 24 dB (Intertek J7488.04)CAC 34; CAC 25, sum 24.0 dB-exact-
CumpleISO 140-9:1985 clause 3.3 Normalized ceiling attenuation Dn,c = D - 10 lg(A/A0), A0 = 10 m243.0103 dB43.0103 dB±1.00e-9 dB0 dB0.0 %
CumpleVigran:(2008) Eqs. (9.18)-(9.20) Plenum model: Eq. (9.18) converges to Eq. (9.20) as the damping vanishesEq. (9.20) value, reproduced by Eq. (9.18)139.5682 dB±0.001 dB0.0004 dB40 %
CumpleHopkins:(2007) Eq. 4.89 / Fig. 4.35 Mass-spring-mass resonance of a masonry cavity wall without and with ties26 Hz (no ties) / 50 Hz (2.5 ties/m2, k = 2 MN/m)26.15 Hz / 49.93 Hz-+0.15 / -0.07 Hz-
CumpleHopkins:(2007) Table A4 Dynamic stiffness of four wall ties (butterfly, double-triangle, twist)1,7 / 16,1 / 94,0 MN/m at 50 mm; 43,4 MN/m at 100 mm1.7 / 16.1 / 94 / 43.4 MN/m-exact-
CumpleISO 10846-2:2008 3.17 Transfer-stiffness level Lk = 20 lg(|k|/k0), k0 = 1 N/m (|k| = 1 MN/m)120 dB120 dB±0.00000100 dB0 dB0.0 %
CumpleISO 10846-3:2002 Formula (1) Indirect method k2,1 = -(2πf)²·m2·T (f=500 Hz, m2=10 kg, T=0.01)-986960.4 N/m-986960.4 N/m±0.1%0 N/m0.0 %
CumpleISO 10846-1:2008 Table A.2 FRF relation k = jω·Z at 250 Hz (|k| recovered from impedance)1001249.2 N/m1001249.2 N/m±0.0001%0 N/m0.0 %
CumpleISO 7626-2:2015 7.5.2 Rigid-mass calibration: accelerance mag(A) = 1/m (m=10 kg)0.1 1/kg0.1 1/kg±1.00e-9 1/kg0 1/kg0.0 %
CumpleISO 7626-2:2015 7.5.2 Rigid-mass calibration: mobility mag(Y) = 1/(2πf·m) at 100 Hz (m=10 kg)0.0001592 m/(N·s)0.0001592 m/(N·s)±0.001%-5.69e-11 m/(N·s)3.6 %
CumpleISO 7626-2:2015 Annex A Normalized random error ε = √((1−γ²)/(2nγ²)): γ²=0.8, n=75 → 4.08 % (< 5 %)4.08 %4.08 %±0.01 %0.002 %40 %
CumpleISO 7626-1:2011 Table 1 Rigid 1 kg mass at ω = 1000 rad/s: mobility 1e-3, compliance 1e-6 (decades)0.001 m/(N·s)0.001 m/(N·s)±1e-7%0 m/(N·s)0.0 %
CumpleISO 7626-5:2019 8.6 Averaged impact estimate of a 10 % resonator: mag(Y) at 40 Hz = closed form0.0099472 m/(N·s)0.0099472 m/(N·s)±0.00001%0 m/(N·s)0.0 %
CumpleISO 7626-5:2019 8.6 Three noisy impacts: estimate = averaged cross-spectrum / averaged force auto-spectrum0.0105183 m/(N·s)0.0105183 m/(N·s)±1e-7%0 m/(N·s)0.0 %
CumpleISO 7626-5:2019 Annex A Formula (A.2) Exponential window on force and response: windowed accelerance = A(s + a)0 (A(s + a) below 500 Hz)max relative deviation 1.9e-08±1.00e-71.93e-819 %
CumpleISO 7626-5:2019 Annex A Formula (A.3) Damping of a 0.5 % resonator after a 5 1/s window, corrected by (A.3) as printed0.00499240.0049904±0.000003-0.00000267 %
CumpleISO 7626-5:2019 Annex A Damping back from a 20 1/s window, the pole moved back by a: 0.5 %0.0050.005±0.0001%-6.93e-120.1 %
CumpleISO 7626-5:2019 Annex A Corrected mobility peak of a 0.5 % resonator after a 20 1/s window = 1/c0.19894 m/(N·s)0.19894 m/(N·s)±0.001%-1.92e-10 m/(N·s)0.0 %
CumpleISO 7626-5:2019 6.4 (Figure 5) Two equal impacts 62.5 ms apart: notches every 1/τ = 16 Hz, zero at 8, 24, 40 Hz16 Hz16 Hz±1.00e-9 Hz0 Hz0.0 %
CumpleISO 7626-5:2019 6.4 Second impact 0.6 of the first: ripple 20 lg(1.6/0.4) = 12.04 dB12.041 dB12.041 dB±0.00000100 dB0 dB0.0 %
CumpleISO 7626-5:2019 7.2 nombra además ISO 7626-2:2015 7.5.2 Rigid 3 kg block through both windows: accelerance 1/m = 0.3333 1/kg0.3333 1/kg0.3333 1/kg±1e-10%0 1/kg0.0 %
CumpleISO 7626-5:2019 8.5.2 (Figure 10) Exponential window that decays to 5 % at the end of the record0.050.05±1.00e-1200.0 %
CumpleISO 7626-5:2019 8.3, 8.5.2 Response decaying to 1 % at the end reads 10 % at the midpoint0.10.1±0.1%00.0 %
CumpleISO 7626-5:2019 8.3, 8.5.2 Response whose envelope ends at 1 %: level at the last sample = 1 %, passes0.010.0099±2%-0.000150 %
CumpleISO 7626-5:2019 3.3, 3.4 Force ESD of a 0.5 ms Gaussian: fall across 1 Hz to 500 Hz in closed form10.7157 dB10.7157 dB±0.000001%0 dB0.0 %
CumpleISO 7626-5:2019 9.1 Noise-free records: coherence 1 over the range; five records pass11±1.00e-900.0 %
CumpleISO 7626-5:2019 8.1, 8.3, 8.5.2, 9.1 The printed limits: channel match, response decay and coherencechannel magnitude = 0.05; channel phase deg = 5; end of record = 0.01; midpoint = 0.1; windowed end = 0.25; high coherence = 0.9; coherence records = 5channel magnitude = 0.05; channel phase deg = 5; end of record = 0.01; midpoint = 0.1; windowed end = 0.25; high coherence = 0.9; coherence records = 5±000.0 %
CumpleISO 10846-3:2002 6.1 Inequality (2) Indirect-method validity limit mag(T) = 0.1 ↔ ΔL1,2 = 20 dB20 dB20 dB±1.00e-9 dB0 dB0.0 %
CumpleISO 10846-3:2002 6.1 Model bias at the validity limit: k_ind/k = 1.1 (0.83 dB ≤ 1 dB, 10 % ≤ 12 %)1.11.1±1e-7%00.0 %
CumpleISO 10846-1:2008 Equation (6) Delivered/blocking force F2/F2,b = 1/1.1 at mag(k2,2/kt) = 0.1 (within 10 %)0.90910.9091±1.00e-900.0 %
CumpleISO 10846-2:2008 7.7 corroborado por ISO 10846-3:2002 7.6 Linearity: ΔLk ≤ 1.5 dB for input spectra 10 dB apart (linear element: 0)ΔLk ≤ 1.5 dB (-2 7.7 c), -3 7.6 c))0 dB±1.5 dB0 dB0.0 %
CumpleISO 10846-4:2003 Formula (11) corroborado por ISO 10846-5:2008 Formula (6) A band of five identical lines averages to that line (closed form, 1 MN/m)1000000 N/m1000000 N/m±1e-7%0 N/m0.0 %
CumpleISO 10846-4:2003 Formula (11) Squared-magnitude average of |k| = 1 to 5 MN/m is √11 MN/m (closed form)3316624.8 N/m3316624.8 N/m±1e-10%0 N/m0.0 %
CumpleISO 10846-4:2003 8.3 corroborado por ISO 10846-5:2008 8.2 A band of four lines has no band value: n ≥ 5 frequencies1/1 band of four lines left undetermined1/1 band of four lines left undetermined±000.0 %
CumpleISO 10846-5:2008 Formula (3) A massless spring gives a flat k1,1 = k from 1 Hz to 400 Hz, f_UL never reached0 N/m (flat |k|, no f_UL)2.33e-10 N/m±0.000001 N/m2.33e-10 N/m0.0 %
CumpleISO 10846-5:2008 6.2 f_UL of a 1 MN/m spring under a 2 kg plate: 2 dB below the 1 Hz to 20 Hz value (closed form)52.119 Hz52.119 Hz±0.01 Hz-0.000236 Hz2.4 %
CumpleISO 10846-5:2008 Formula (7) Every band of k1,1 at or below f_UL is within 2 dB of k2,1 (2 kg plate on 1 MN/m)within 2 dB (8.3)1.779 dB±2 dB1.779 dB89 %
CumpleISO 10846-4:2003 Inequality (3) Output mass limit 0.06·|F2|/|a2|: LF2 = 120 dB, La2 = 100 dB gives 0.6 kg0.6 kg0.6 kg±1e-10%0 kg0.0 %
CumpleISO 10846-4:2003 6.2 NOTE 1 m0 on the Inequality (3) bound: worst-case force-level bias -20 lg 0.94 = 0.537 dB, the 0.5 dB NOTE 1 prints to one decimal (1 dp print)0.5 dB (1 dp print, +/-0.05 dB)0.537 dB±0.05 dB0.037 dB74 %
CumpleISO 10846-4:2003 Formula (6) A rigid 25 kg block: m2,eff = |2F2/(a'1 + a''1)| = m2 at every frequency0 kg0 kg±1.00e-12 kg0 kg0.0 %
CumpleISO 10846-4:2003 Inequality (5) corroborado por ISO 10846-3:2002 Inequality (3) f3 of m2,eff = m2(1 + (f/3 kHz)²): the 1 dB crossing, 3000·√(10^(1/20) - 1) Hz1047.93 Hz1047.93 Hz±0.05 Hz-0.000235 Hz0.5 %
CumpleISO 10846-5:2008 Inequalities (1) and (2) 20 dB and 15 dB hold at equality and fail 0.1 dB below4/4 verdicts at and below the limits4/4 verdicts at and below the limits±000.0 %
CumpleISO 10846-5:2008 Formulas (B.2) and (B.3) Budget from the B.3 expressions: u = 1.394 dB, U = 2u = 2.789 dB (no repeatability spread)2.7887 dB2.7887 dB±1.00e-9 dB0 dB0.0 %
CumpleISO 10846-5:2008 Table B.1 The Table B.1 inputs (B.3 expressions rounded up to one decimal) give u = √2.12 = 1.456 dB1.456 dB1.456 dB±1.00e-9 dB0 dB0.0 %
CumpleISO/TS 7849-1:2009 Formula (8) Calibration L_v from â = 9.81 m/s² at 100 Hz (standard's EXAMPLE)106.9 dB106.9 dB±0.1 dB-0.02 dB40 %
CumpleISO/TS 7849-2:2009 Formula (15) L_W from L_v via measured radiation factor = 10 lg(P/P0) (round-trip)84.771 dB84.771 dB±0.00000100 dB0 dB0.0 %
CumpleISO/TS 7849-1:2009 Formula (12) Impedance term: L_W − L_v = 10 lg(411/400) at ε = 1, S = S00.1178 dB0.1178 dB±1.00e-9 dB0 dB0.0 %
CumpleUNE-EN 15657:2018 Formula (14) Reception-plate L_Ws = resonant-plate power P = ωη(mS)⟨v²⟩ (round-trip)55.545 dB55.545 dB±0.00000100 dB0 dB0.0 %
CumpleUNE-EN 15657:2018 Formula (13) Plate loss factor η = 2.2/(f·Ts) at 1 kHz, Ts = 0.3 s0.00730.0073±1.00e-900.0 %
CumpleUNE-EN 15657:2018 Formulae (15)/(17) corroborado por EN 12354-5 Annex I.3 Source conversion chain reproduces Table I.8 (wall, installed)max abs(L_Ws,inst - Table I.8) <= 0.15 dB0.055 dB±0.15 dB0.055 dB37 %
CumpleISO 9611:1996 eq. (9) Mean free velocity level (energy mean, v0 = 5e-8 m/s)72.3017 dB72.3017 dB±1.00e-9 dB0 dB0.0 %
CumpleISO 12354-1:2017 Annex L, Tables L.2 to L.4 In-situ element chain: 10 lg sigma, 10 lg sigma_f, eta_tot, Rsitu, a_situ (21 bands x 5 elements)0 dB0.057 dB±0.1 dB0.057 dB57 %
CumpleISO 12354-1:2017 Annex L, Table L.1 Detailed airborne model: 13 paths + R' per band, R'w = 57 dBmax path/total dev <= 0.1 dB; R'w = 57 dB0.055 dB; 57 dB-0.055 dB-
CumpleISO 12354-2:2017 Annex G, Tables G.3, G.4 and G.1 Detailed impact model: Ln,situ, Ln,Dd, Ln,Df, L'n per band, L'n,w = 41 dBmax path/total dev <= 0.1 dB; L'n,w (CI) = 41 (2) dB0.077 dB; 41 (2) dB-0.077 dB-
CumpleHopkins:(2007) 3.6.3.1 / 4.4.3.1, printed pp. 276-282 and 513-514 Tapping machine: vo, cut-off frequencies fco of a bare slab and two soft coverings (7 000 / 2 300 / 100 Hz)00.0077±0.020.007739 %
CumpleHopkins:(2007) Figs. 3.30/3.31 and 4.73, printed pp. 281 and 524 Over/under-critical case of four walking surfaces; double floating-floor resonances 74 Hz and 195 Hz4/4 critical cases; fmsms = 74 / 195 Hz (+/-2%)4/4; 74.1 / 194.0 Hz-0.53%-
CumpleISO 12354-2:2017 Annex C / Annex G Table G.4 Floating floor: fo = 160 sqrt(s'/m') = 52.8 Hz, DeltaL = 30 lg(f/fo) over 21 bands, DeltaLw = 32.2 dB0 dB0.048 dB±0.05 dB0.048 dB96 %
CumpleISO 12354-1:2017 Annex D corroborado por Hopkins:(2007) Fig. 4.48, printed p. 486 Lining resonance (Formula D.1) 542 Hz and the Table D.1 improvement branchesfo = 542 Hz (+/-1%); 8/8 Table D.1 rows541.9 Hz; 8/8-0.02%-
CumpleEN 12354-5:2009 Formula (19b/19c) Coupling term → force-source limit 10 lg(mag(Ys)/Re{Yi}) as mag(Ys) ≫ mag(Yi)40 dB40.001 dB±0.01 dB0.001 dB10 %
CumpleEN 12354-5:2009 Annex I.3, Table I.9 Flushing cistern: four paths + Formula (17) total -> 29 dB(A)max path/total dev <= 0.15 dB; total 29 dB(A)0.055 dB; 29.3 dB(A)-0.055 dB-
CumpleEN 12354-5:2009 Annex I.2, Table I.6a Whirlpool floor component: mobility correction + path 11max abs(dev vs Table I.6a) <= 0.15 dB0.1 dB±0.15 dB0.1 dB67 %
Room acoustics 16/16
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleSabine (W. C. Sabine, 1922) Reverberation time T = k·V/A (V=120 m³, S=158 m², α=0.2)0.611825 s0.611825 s±0.000001 s4.25e-11 s0.0 %
CumpleLong, Architectural Acoustics:2e Table 8.1 Room modes of a 7 x 5 x 3 m room: the six printed frequencies, Hz42.4 Hz42.27 Hz±0.13 Hz-0.126 Hz97 %
CumpleLong, Architectural Acoustics:2e Eq. (8.46) Modal density of a 7 x 5 x 3 m room at 1 kHz = 34 modes/Hz34 modes/Hz34.32 modes/Hz±0.5 modes/Hz0.32 modes/Hz64 %
CumpleLong, Architectural Acoustics:2e Eq. (17.51) Restaurant self-noise, 20 talkers over 20 metric sabins = 76 dB76 dB76.021 dB±0.05 dB0.021 dB42 %
CumpleLong, Architectural Acoustics:2e Eq. (17.54) Privacy bound A_tab < 3.16 rt^2 (Q = 2, L_SN = -9 dB)3.16 m²3.164 m²±0.005 m²0.004 m²80 %
CumpleEverest, Master Handbook of Acoustics:4th ed Fig. 7-22 Sabine RT, worked Example 1 @ 1 kHz (untreated 23.3×16×10 ft room, SI)3.39 s3.402 s±0.02 s0.012 s60 %
CumpleEyring (Norris-Eyring, 1930) Reverberation time T = k·V/(-S·ln(1-ᾱ)) (α=0.2)0.548369 s0.548369 s±0.000001 s-4.34e-11 s0.0 %
CumpleArau-Puchades (Acustica 65, 1988, Formula 18) T (α=0.5/0.1/0.1 per wall pair, dims 8×5×3 m)0.812147 s0.812147 s±0.000001 s4.47e-11 s0.0 %
CumpleModel identity (uniform absorption) Arau-Puchades ≡ Eyring when ᾱ is uniform0.548369 s (= Eyring)0.548369 s±1.00e-9 s0 s0.0 %
CumpleVorlander Auralization:2e Eq. (11.38)-(11.39) Image-source direct-sound amplitude 1/(4πr) and delay r/c (r = 4 m)0.01989440.0198944±1.00e-900.0 %
CumpleKuttruff Room Acoustics:6e Eq. (9.23) Audible shoebox image count up to order 10 (= 1560)15601560±000.0 %
CumpleKuttruff Room Acoustics:6e Eq. (4.6) Temporal reflection density dN/dt = 4πc³t²/V (t = 0.1 s, V = 120 m³)42258.2 1/s42258.2 1/s±0.00000100 1/s0 1/s0.0 %
CumpleBies:5e Eq. (6.44) Room constant R = Sᾱ/(1-ᾱ) (S = 100 m², ᾱ = 0.2 → 25 m²)25 m²25 m²±1.00e-9 m²0 m²0.0 %
CumpleBies:5e Eq. (6.43) Critical distance rc: direct field = reverberant field (R = 25, Q = 1)0.160000 (= reverberant term)0.16±1.00e-900.0 %
CumpleKuttruff Room Acoustics:6e Eq. (3.44) Schroeder frequency f_s = 2000√(T/V) (V = 200 m³, T = 1 s)141.421 Hz141.421 Hz±0.00000100 Hz0 Hz0.0 %
CumpleBies:5e Eq. (6.43) Steady-state SPL Lp = Lw + 10lg(Q/4πr² + 4/R) (Lw=90, r=1, R=25, Q=1)83.7945 dB83.7945 dB±0.00000100 dB0 dB0.0 %
Sound calibrators and the conformance rule (IEC 60942, IEC 61672-1) 28/28
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleIEC 60942:2017 Table E.1 Example 1: |deviation| 0.40 dB, U 0.12 dB against 0.25 dB and 0.15 dBNo: Deviation exceeds acceptance limitsNo: Deviation exceeds acceptance limits±000.0 %
CumpleIEC 60942:2017 Table E.1 Example 2: |deviation| 0.35 dB, U 0.12 dB against 0.25 dB and 0.15 dBNo: Deviation exceeds acceptance limitsNo: Deviation exceeds acceptance limits±000.0 %
CumpleIEC 60942:2017 Table E.1 Example 3: |deviation| 0.20 dB, U 0.13 dB against 0.25 dB and 0.15 dBYes: Deviation within acceptance limits AND uncertainty within maximum-permittedYes: Deviation within acceptance limits AND uncertainty within maximum-permitted±000.0 %
CumpleIEC 60942:2017 Table E.1 Example 4: |deviation| 0.00 dB, U 0.14 dB against 0.25 dB and 0.15 dBYes: Deviation within acceptance limits AND uncertainty within maximum-permittedYes: Deviation within acceptance limits AND uncertainty within maximum-permitted±000.0 %
CumpleIEC 60942:2017 Table E.1 Example 5: |deviation| 0.00 dB, U 0.17 dB against 0.25 dB and 0.15 dBNo: Deviation within acceptance limits BUT uncertainty exceeds maximum-permittedNo: Deviation within acceptance limits BUT uncertainty exceeds maximum-permitted±000.0 %
CumpleIEC 60942:2017 Table E.1 Example 6: |deviation| 0.25 dB, U 0.10 dB against 0.25 dB and 0.15 dBYes: Deviation within acceptance limits AND uncertainty within maximum-permittedYes: Deviation within acceptance limits AND uncertainty within maximum-permitted±000.0 %
CumpleIEC 60942:2017 Table E.1 Example 7: |deviation| 0.25 dB, U 0.15 dB against 0.25 dB and 0.15 dBYes: Deviation within acceptance limits AND uncertainty within maximum-permittedYes: Deviation within acceptance limits AND uncertainty within maximum-permitted±000.0 %
CumpleIEC 60942:2017 Table E.1 Example 8: |deviation| 0.40 dB, U 0.50 dB against 0.25 dB and 0.20 dBNo: Deviation exceeds acceptance limits AND uncertainty exceeds maximum-permittedNo: Deviation exceeds acceptance limits AND uncertainty exceeds maximum-permitted±000.0 %
CumpleIEC 61672-1:2013 Table C.1 Example 1: deviation +1.7 dB, U 0.3 dB against +1.0; -1.2 dB and 0.5 dBNo: Deviation exceeds acceptance limitsNo: Deviation exceeds acceptance limits±000.0 %
CumpleIEC 61672-1:2013 Table C.1 Example 2: deviation +1.1 dB, U 0.3 dB against +1.0; -1.2 dB and 0.5 dBNo: Deviation exceeds acceptance limitsNo: Deviation exceeds acceptance limits±000.0 %
CumpleIEC 61672-1:2013 Table C.1 Example 3: deviation +1.0 dB, U 0.3 dB against +1.0; -1.2 dB and 0.5 dBYes: Deviation within acceptance limits AND uncertainty within maximum-permittedYes: Deviation within acceptance limits AND uncertainty within maximum-permitted±000.0 %
CumpleIEC 61672-1:2013 Table C.1 Example 4: deviation +0.0 dB, U 0.3 dB against +1.0; -1.2 dB and 0.5 dBYes: Deviation within acceptance limits AND uncertainty within maximum-permittedYes: Deviation within acceptance limits AND uncertainty within maximum-permitted±000.0 %
CumpleIEC 61672-1:2013 Table C.1 Example 5: deviation +0.0 dB, U 0.9 dB against +1.0; -1.2 dB and 0.5 dBNo: Deviation within acceptance limits BUT uncertainty exceeds maximum-permittedNo: Deviation within acceptance limits BUT uncertainty exceeds maximum-permitted±000.0 %
CumpleIEC 61672-1:2013 Table C.1 Example 6: deviation -0.5 dB, U 0.3 dB against +1.0; -1.2 dB and 0.5 dBYes: Deviation within acceptance limits AND uncertainty within maximum-permittedYes: Deviation within acceptance limits AND uncertainty within maximum-permitted±000.0 %
CumpleIEC 61672-1:2013 Table C.1 Example 7: deviation -1.2 dB, U 0.3 dB against +1.0; -1.2 dB and 0.5 dBYes: Deviation within acceptance limits AND uncertainty within maximum-permittedYes: Deviation within acceptance limits AND uncertainty within maximum-permitted±000.0 %
CumpleIEC 61672-1:2013 Table C.1 Example 8: deviation -1.3 dB, U 0.3 dB against +1.0; -1.2 dB and 0.5 dBNo: Deviation exceeds acceptance limitsNo: Deviation exceeds acceptance limits±000.0 %
CumpleIEC 61672-1:2013 Table C.1 Example 9: deviation -2.0 dB, U 0.3 dB against +1.0; -1.2 dB and 0.5 dBNo: Deviation exceeds acceptance limitsNo: Deviation exceeds acceptance limits±000.0 %
CumpleIEC 61672-1:2013 Table C.1 Example 10: deviation -2.0 dB, U 0.7 dB against +1.0; -1.2 dB and 0.5 dBNo: Deviation exceeds acceptance limits AND uncertainty exceeds maximum-permittedNo: Deviation exceeds acceptance limits AND uncertainty exceeds maximum-permitted±000.0 %
CumpleIEC 60942:2017 Table 2 Level and short-term fluctuation limits, dashes and ranges, by class84/84 printed cells84/84 printed cells±000.0 %
CumpleIEC 60942:2017 Tables 3, 4 and 6 Supply-voltage, frequency and environmental-frequency limits, by class9/9 printed cells9/9 printed cells±000.0 %
CumpleIEC 60942:2017 Tables 5 and 7 Environmental level and total distortion + noise limits, by class56/56 printed cells56/56 printed cells±000.0 %
CumpleIEC 60942:2017 Tables A.1, A.3 and A.4 Maximum-permitted uncertainties keyed by frequency, by class140/140 printed cells140/140 printed cells±000.0 %
CumpleIEC 60942:2017 Tables A.2 and A.5, A.5.5.7 Maximum-permitted uncertainties of the frequency and the supply-voltage effect9/9 printed cells9/9 printed cells±000.0 %
CumpleIEC 60942:2017 5.9.4.2 and A.7.4.8 Level change in a power- or radio-frequency field and its maximum uncertainty6/6 printed cells6/6 printed cells±000.0 %
CumpleIEC 60942:2017 A.6.4.7 Reduced limits of the abbreviated environmental test6/6 printed cells6/6 printed cells±000.0 %
CumpleIEC 60942:2017 5.1.15 with Tables 2 and A.1 Table E.1 examples 1 to 7 as a class 1 level at 1 kHz, 7 verdictsNo, No, Yes, Yes, No, Yes, Yes7/7 verdicts±000.0 %
CumpleIEC 60942:2017 A.6.4.7 0.22 dB conforms to Table 5 and not to the abbreviated test, 2 verdictsconforms to Table 5 (0.25 dB), not to A.6.4.7 (0.20 dB)2/2 verdicts±000.0 %
CumpleIEC 60942:2017 5.5 and A.6.2.4 with Tables 2, 5, A.4 and A.5 Class 1 at 2 kHz: 0.33 dB out of the band and in it, -0.5 % with U 0.25 %, 3 verdictsNo by Table 5 (0.30 dB); Yes by Table 2 (0.35 dB); No, U over Table A.5 (0.2 %)3/3 verdicts±000.0 %
Sound level meter periodic tests (IEC 61672-3, IEC 61672-1) 40/40
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleIEC 61672-1:2013 Table 4 Reference responses and limits of LAFmax - LA and LAE - LA, 12 durations96/96 cells96/96 cells±000.0 %
CumpleIEC 61672-1:2013 Table 4 Reference responses and limits of LASmax - LA, 9 durations36/36 cells36/36 cells±000.0 %
CumpleIEC 61672-1:2013 Table 4, Equations (7) and (8) Reference toneburst responses against 10 lg(1 - exp(-Tb/tau)) and 10 lg(Tb/T0)33/33 reference responses33/33 reference responses±000.0 %
CumpleIEC 61672-1:2013 Table 5 Reference differences LCpeak - LC and limits, 5 test signals25/25 cells25/25 cells±000.0 %
CumpleIEC 61672-1:2013 Table B.1 Maximum-permitted uncertainties, 31 printed rows (the F and S decay rates in two)32/32 rows32/32 rows±000.0 %
CumpleIEC 61672-3:2013 12.16 resuelto con IEC 61672-1:2013 Table 3 Acoustical weighting at 8 kHz, class 1, upper limitconforms 0.01 dB inside and at the limit, not 0.01 dB past itconforms inside, conforms at the limit, does not conform past it±000.0 %
CumpleIEC 61672-3:2013 12.16 resuelto con IEC 61672-1:2013 Table 3 Acoustical weighting at 8 kHz, class 1, lower limitconforms 0.01 dB inside and at the limit, not 0.01 dB past itconforms inside, conforms at the limit, does not conform past it±000.0 %
CumpleIEC 61672-3:2013 12.16 resuelto con IEC 61672-1:2013 Table 3 Acoustical weighting at 125 Hz, class 2, lower limitconforms 0.01 dB inside and at the limit, not 0.01 dB past itconforms inside, conforms at the limit, does not conform past it±000.0 %
CumpleIEC 61672-3:2013 12.16 resuelto con IEC 61672-1:2013 Table 3 Acoustical weighting at 8 kHz, class 2, upper limitconforms 0.01 dB inside and at the limit, not 0.01 dB past itconforms inside, conforms at the limit, does not conform past it±000.0 %
CumpleIEC 61672-3:2013 13.10 resuelto con IEC 61672-1:2013 Table 3 Electrical weighting A at 16 kHz, class 1, lower limitconforms 0.01 dB inside and at the limit, not 0.01 dB past itconforms inside, conforms at the limit, does not conform past it±000.0 %
CumpleIEC 61672-3:2013 13.10 resuelto con IEC 61672-1:2013 Table 3 Electrical weighting C at 1 kHz, class 1, upper limitconforms 0.01 dB inside and at the limit, not 0.01 dB past itconforms inside, conforms at the limit, does not conform past it±000.0 %
CumpleIEC 61672-3:2013 13.10 resuelto con IEC 61672-1:2013 Table 3 Electrical weighting Z at 8 kHz, class 2, lower limitconforms 0.01 dB inside and at the limit, not 0.01 dB past itconforms inside, conforms at the limit, does not conform past it±000.0 %
CumpleIEC 61672-3:2013 14.2 resuelto con IEC 61672-1:2013 5.5.9 C against A at 1 kHzconforms 0.01 dB inside and at the limit, not 0.01 dB past itconforms inside, conforms at the limit, does not conform past it±000.0 %
CumpleIEC 61672-3:2013 14.3 resuelto con IEC 61672-1:2013 5.8.3 Time-averaged against F at 1 kHzconforms 0.01 dB inside and at the limit, not 0.01 dB past itconforms inside, conforms at the limit, does not conform past it±000.0 %
CumpleIEC 61672-3:2013 15.3 resuelto con IEC 61672-1:2013 5.14.2 Long-term stability, class 1conforms 0.01 dB inside and at the limit, not 0.01 dB past itconforms inside, conforms at the limit, does not conform past it±000.0 %
CumpleIEC 61672-3:2013 15.3 resuelto con IEC 61672-1:2013 5.14.2 Long-term stability, class 2conforms 0.01 dB inside and at the limit, not 0.01 dB past itconforms inside, conforms at the limit, does not conform past it±000.0 %
CumpleIEC 61672-3:2013 16.4 resuelto con IEC 61672-1:2013 5.6.5 Level linearity on the reference level range, class 1conforms 0.01 dB inside and at the limit, not 0.01 dB past itconforms inside, conforms at the limit, does not conform past it±000.0 %
CumpleIEC 61672-3:2013 16.4 resuelto con IEC 61672-1:2013 5.6.5 Level linearity on the reference level range, class 2conforms 0.01 dB inside and at the limit, not 0.01 dB past itconforms inside, conforms at the limit, does not conform past it±000.0 %
CumpleIEC 61672-3:2013 17.5 resuelto con IEC 61672-1:2013 5.6.5 Level linearity including the range control, class 1conforms 0.01 dB inside and at the limit, not 0.01 dB past itconforms inside, conforms at the limit, does not conform past it±000.0 %
CumpleIEC 61672-3:2013 17.5 resuelto con IEC 61672-1:2013 5.6.5 Level linearity including the range control, class 2conforms 0.01 dB inside and at the limit, not 0.01 dB past itconforms inside, conforms at the limit, does not conform past it±000.0 %
CumpleIEC 61672-3:2013 18.8 resuelto con IEC 61672-1:2013 Table 4 Toneburst LAFmax - LA at 0.25 ms, class 1, lower limitconforms 0.01 dB inside and at the limit, not 0.01 dB past itconforms inside, conforms at the limit, does not conform past it±000.0 %
CumpleIEC 61672-3:2013 18.8 resuelto con IEC 61672-1:2013 Table 4 Toneburst LAFmax - LA at 0.25 ms, class 2, lower limitconforms 0.01 dB inside and at the limit, not 0.01 dB past itconforms inside, conforms at the limit, does not conform past it±000.0 %
CumpleIEC 61672-3:2013 18.8 resuelto con IEC 61672-1:2013 Table 4 Toneburst LAFmax - LA at 0.25 ms, class 2, upper limitconforms 0.01 dB inside and at the limit, not 0.01 dB past itconforms inside, conforms at the limit, does not conform past it±000.0 %
CumpleIEC 61672-3:2013 18.8 resuelto con IEC 61672-1:2013 Table 4 Toneburst LASmax - LA at 2 ms, class 1, lower limitconforms 0.01 dB inside and at the limit, not 0.01 dB past itconforms inside, conforms at the limit, does not conform past it±000.0 %
CumpleIEC 61672-3:2013 18.8 resuelto con IEC 61672-1:2013 Table 4 Toneburst LASmax - LA at 2 ms, class 2, lower limitconforms 0.01 dB inside and at the limit, not 0.01 dB past itconforms inside, conforms at the limit, does not conform past it±000.0 %
CumpleIEC 61672-3:2013 19.6 resuelto con IEC 61672-1:2013 Table 5 C-weighted peak, one cycle at 8 kHz, class 1, upper limitconforms 0.01 dB inside and at the limit, not 0.01 dB past itconforms inside, conforms at the limit, does not conform past it±000.0 %
CumpleIEC 61672-3:2013 19.6 resuelto con IEC 61672-1:2013 Table 5 C-weighted peak, one cycle at 8 kHz, class 2, upper limitconforms 0.01 dB inside and at the limit, not 0.01 dB past itconforms inside, conforms at the limit, does not conform past it±000.0 %
CumpleIEC 61672-3:2013 19.6 resuelto con IEC 61672-1:2013 Table 5 C-weighted peak, negative half cycle at 500 Hz, class 1, lower limitconforms 0.01 dB inside and at the limit, not 0.01 dB past itconforms inside, conforms at the limit, does not conform past it±000.0 %
CumpleIEC 61672-3:2013 19.6 resuelto con IEC 61672-1:2013 Table 5 C-weighted peak, negative half cycle at 500 Hz, class 2, lower limitconforms 0.01 dB inside and at the limit, not 0.01 dB past itconforms inside, conforms at the limit, does not conform past it±000.0 %
CumpleIEC 61672-3:2013 20.4 resuelto con IEC 61672-1:2013 5.11.3 Overload indication, positive less negative half cycleconforms 0.01 dB inside and at the limit, not 0.01 dB past itconforms inside, conforms at the limit, does not conform past it±000.0 %
CumpleIEC 61672-3:2013 21.3 resuelto con IEC 61672-1:2013 5.15.2 High-level stability, class 1conforms 0.01 dB inside and at the limit, not 0.01 dB past itconforms inside, conforms at the limit, does not conform past it±000.0 %
CumpleIEC 61672-3:2013 21.3 resuelto con IEC 61672-1:2013 5.15.2 High-level stability, class 2conforms 0.01 dB inside and at the limit, not 0.01 dB past itconforms inside, conforms at the limit, does not conform past it±000.0 %
CumpleIEC 61672-3:2013 4.3 resuelto con IEC 61672-1:2013 Table B.1 The maximum of every requirement: conforms at its value, unusable 0.01 dB above11/11 maxima11/11 maxima±000.0 %
CumpleIEC 61672-3:2013 4.4 resuelto con IEC 61672-1:2013 Table B.1 Over the maximum only by the correction data: did not conform, and unusable past it4.4 inside and at the maximum, unusable (4.3) past it4.4 just inside, 4.4 at the maximum, not 4.4 past it±000.0 %
CumpleIEC 61672-3:2013 8.1 resuelto con IEC 61672-1:2013 5.1.10 A class 2 meter with C-weighted peak owes C in 11.2, 13 and 14.24/4 completeness findings4/4 completeness findings±000.0 %
CumpleIEC 61672-3:2013 8.1, 14.1 and 20.1 S tonebursts and an overload test show the displays 14.3 compares with F4/4 completeness findings4/4 completeness findings±000.0 %
CumpleIEC 61672-3:2013 16.3, 17.3 and 17.4 Steps short of 16.3, or a level range left out of 17.4, the reference one included, leave the test open7/7 completeness findings7/7 completeness findings±000.0 %
CumpleIEC 61672-3:2013 22 r) Statement of a pass with public pattern approval, class 11/1 statement word for word1/1 statement word for word±000.0 %
CumpleIEC 61672-3:2013 22 s) Statement of a pass without public pattern approval, class 21/1 statement word for word1/1 statement word for word±000.0 %
CumpleIEC 61672-3:2013 22 t) Statement of a failure, class 11/1 statement word for word1/1 statement word for word±000.0 %
Psychoacoustics 18/18
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleMoore, Psychology of Hearing:6e p. 77 nombra además Glasberg & Moore:1990 ERB_N number of 1000 Hz = 15.59 Cam15.59 Cam15.5932 Cam±0.005 Cam0.0032 Cam64 %
CumpleMoore, Psychology of Hearing:6e p. 76 nombra además Glasberg & Moore:1990 ERB_N at 1 kHz vs the printed 24.7(4.37F + 1), Hz132.639 Hz132.445 Hz±0.3%-0.194 Hz49 %
CumpleISO 532-1:2017 Annex B.2 Zwicker loudness N, stationary test signal 183.2957 sone (+/-0.1%)83.2957 sone-0 sone-
CumpleISO 532-1:2017 Annex B.5 Time-varying loudness Nmax, technical signal 14 (aircraft, free field)22.6399 sone22.6399 sone±0.1%0.00000792 sone0.0 %
CumpleISO 532-1:2017 Annex B.5 Time-varying loudness Nmax, technical signal 15 (vehicle interior, diffuse field)9.6059 sone9.6059 sone±0.1%-0.0000308 sone0.3 %
CumpleDIN 45692:2009-08 Clause 6 Sharpness of the standard 1 kHz reference signal1 acum1 acum±1.00e-9 acum0 acum0.0 %
CumpleDIN 45692:2009-08 Table A.2 Sharpness of critical-band noise at 2.5 kHz (2320-2700 Hz, 4 sone)1.78 acum1.747 acum±0.089 acum-0.033 acum37 %
CumpleISO 226:2023 Table B.1 Equal-loudness contour, 60 phon @ 100 Hz78.5 dB SPL78.504 dB SPL±0.05 dB SPL0.004 dB SPL8.0 %
CumpleECMA-418-2:2025 Clause 5.1.8 HMS loudness of a 1 kHz / 40 dB tone (c_N=0.0211964)1 sone_HMS0.9843 sone_HMS±0.03 sone_HMS-0.0157 sone_HMS52 %
CumpleECMA-418-2:2025 Clause 6.2.8 HMS tonality of a 1 kHz / 40 dB tone (c_T=2.8758615)1 tu_HMS0.9998 tu_HMS±0.03 tu_HMS-0.0002 tu_HMS0.7 %
CumpleECMA-418-2:2025 Clause 7 HMS roughness of a 1 kHz / 70 Hz / m=1 / overall 60 dB tone (c_R=0.0180685)1 asper0.9999 asper±0.01 asper-0.0001 asper1.0 %
CumpleISO 532-2:2017 Clause 3.17 / Annex B.1 Moore-Glasberg loudness of a 1 kHz / 40 dB tone (C=0.0617)1 sone1.0001 sone±0.01 sone0.0001 sone1.0 %
CumpleISO 532-3:2023 Annex C.1 Moore-Glasberg-Schlittenlacher peak LTL, steady 1 kHz / 40 dB1 sone0.9996 sone±0.02 sone-0.0004 sone2.0 %
CumpleECMA-418-2:2025 Clause 9 HMS fluctuation strength of a 1 kHz / 4 Hz / m=1 / overall 60 dB tone (c_F=0.003840572)1 vacil_HMS0.9931 vacil_HMS±0.01 vacil_HMS-0.0069 vacil_HMS69 %
CumpleECMA-418-2:2025 Clause 5.1.9 Audibility criterion on the total basis loudness (0.01 sone_HMS)0.01 sone_HMS0.01 sone_HMS (psychoacoustics.AUDIBILITY_THRESHOLD_SONE_HMS)±0 sone_HMS0 sone_HMS0.0 %
CumpleECMA-418-2:2025 Clause 6.3 Prominent tonality criterion (0.4 tu_HMS)0.4 tu_HMS0.4 tu_HMS (psychoacoustics.PROMINENT_TONALITY_TU_HMS)±0 tu_HMS0 tu_HMS0.0 %
CumpleECMA-418-2:2025 Clause 7.2 Prominent roughness criterion (0.2 asper)0.2 asper0.2 asper (psychoacoustics.PROMINENT_ROUGHNESS_ASPER)±0 asper0 asper0.0 %
CumpleECMA-418-2:2025 Clause 9.2 Prominent fluctuation strength criterion (0.2 vacil_HMS)0.2 vacil_HMS0.2 vacil_HMS (psychoacoustics.PROMINENT_FLUCTUATION_STRENGTH_VACIL_HMS)±0 vacil_HMS0 vacil_HMS0.0 %
Speech transmission (IEC 60268-16) 14/14
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleIEC 60268-16:2020 A.2.2 STI weighting-factor pair (500 Hz + 1 kHz bands)0.3980.398±0.00100.0 %
CumpleIEC 60268-16:2020 A.3.1.2 Uniform MTF m=0.5 maps to STI=0.50.50.5±0.0100.0 %
CumpleIEC 60268-16:2011 Annex M Full-STI worked example: printed MTF + speech/noise spectra -> STISTI 0.76 (MTI row of step 4c)STI 0.758 (max MTI dev 0.00)--0.002-
CumpleIEC 60268-16:2011 Annex M Occupancy-noise adjustment: measured MTF and four level spectra -> STISTI 0.76 (step 3 matrix, step 4 STI)STI 0.758 (max MTF dev 0.0009)--0.002-
CumpleIEC 60268-16:2011 Annex M Step 2 printed intermediates: the measurement condition, row by rowevery printed row of step 2 rounds as tabulatedworst row: amf in dB, 0.99 of its last printed place±10.99399 %
CumpleIEC 60268-16:2011 Annex M Step 3 printed intermediates: the operational condition, row by rowevery printed row of step 3 rounds as tabulatedworst row: amf in dB, 0.99 of its last printed place±10.98799 %
CumpleIEC 60268-16:2011 Annex M Step 4a printed intermediates: 98 effective signal-to-noise ratiosall 98 printed effective SNRsworst cell 0.074 dB from its printed value±0.08 dB0.074 dB93 %
CumpleIEC 60268-16:2020 C.3.2 STIPA direct method, Formula (C.1) signal at m=0.20.30.2992±0.01-0.00088.0 %
CumpleIEC 60268-16:2020 C.3.2 STIPA direct method, Formula (C.1) signal at m=0.50.50.4998±0.01-0.00022.0 %
CumpleIEC 60268-16:2020 C.3.2 STIPA direct method, Formula (C.1) signal at m=0.80.70.7002±0.010.00022.0 %
CumpleIEC 60268-16:2020 C.3.3 Indirect method: exponential decay RT60=1 s vs Schroeder MTF0.58850.5885±0.005-0.000009670.2 %
CumpleIEC 60268-16:2020 C.4.2 Filter-bank slope: +41 dB unmodulated tone one octave below 125 Hzm >= 0.5 (C.4.2 pass criterion)0.883[0.5, +∞]0.883-
CumpleIEC 60268-16:2020 A.2.2 (audio path) Weighting factors: modulated 500 Hz + 1 kHz pair through stipa()0.3980.398±0.00500.0 %
CumpleIEC 60268-16:2020 A.3.1.2 (audio path) Filter-bank phase: half-octave edge carriers at TI=0.90.90.8981±0.01-0.001919 %
System measurement (Golay / Kirkeby / Mueller-Massarani) 5/5
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleHavelock:2008 Part I Ch. 6 (Xiang), Eq. (2) Golay pair: sum of periodic autocorrelations = 2L*delta (L = 4096)0 (algebraic identity, +/-1e-10)0±1.00e-1000.0 %
CumpleHavelock:2008 Part I Ch. 6 (Xiang), Eq. (4) Golay chain recovers a delay+gain system IR (noiseless, exact)0 (machine precision, +/-1e-13)0±1.00e-1300.0 %
CumpleKirkeby & Nelson:1999 Eq. (17) corroborado por Mueller-Massarani:2001 Sec. 3.1 In-band equalization residue equals eps/(|H|^2 + eps) bin by bin0 (closed form, +/-1e-12)0±1.00e-1200.0 %
CumpleKirkeby & Nelson:1999 (max of x/(x^2+eps) = 1/(2*sqrt(eps))) Out-of-band inverse-filter gain within the regularization cap<= -6.021 dB (analytic cap)-6.034 dB-headroom +0.013 dB-
CumpleMueller-Massarani:2001 Secs. 4.2-4.3 (group-delay synthesis) Shaped sweep's Welch spectrum follows the pink target, in-band0 dB in-band deviation (+/-0.5 dB)0.0652 dB±0.5 dB0.0652 dB13 %
Intensity & sound power 88/88
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleIEC 61043:1993 Clause 5 Plane-wave intensity I = p^2 / (rho c)0.00238 W/m²0.00239 W/m²±1.5%0.00001 W/m²28 %
CumpleISO 3744:2010 Eq. 18 Monopole hemisphere recovers LW (r=4 m)95 dB95 dB±1.00e-9 dB0 dB0.0 %
CumpleISO 9614-2:1996 Eq. 12 Intensity scan recovers LW of an enclosed source90 dB90 dB±0.000001 dB0 dB0.0 %
CumpleIEC 61043:1993 Table 2 Minimum delta_pI0 per band, probe/processor/instrument, class 1/2132 tabulated minima reproducedmax absolute deviation 0.000 dB±0 dB0 dB0.0 %
CumpleIEC 61043:1993 Table 2 Note 1 Separation rule +10 lg(x/25) on all six columns of 25 mm minima (x = 50 mm)3.0103 dB3.0103 dB±1.00e-12 dB0 dB0.0 %
CumpleFahy, Sound Intensity:2e 6.8 delta_pI0 = 20 dB is a phase mismatch of 0.26 deg (1 kHz, 25 mm)0.26 deg0.2624 deg±0.005 deg0.0024 deg48 %
CumpleISO 9614-1:1993 Eqs (A.1)/(A.2) Temporal variability F1 is the coefficient of variation of M samples0.1851640.185164±1.00e-1200.0 %
CumpleISO 4871:1996 clause 3.15 / Annex B Declared L_WAd = L_WA + K_WA (Annex B, L_WA=88, K_WA=2)90 dB90 dB±0 dB0 dB0.0 %
CumpleISO 4871:1996 clause 6.2 Single-machine verification boundary L_1 <= L_WAdL_1=90 verified, L_1=91 rejected (L_WAd=90)90->True, 91->False-boundary L_1 = L_WAd-
CumpleISO 3741:2010 Eq. 20 Reverberation-room method inverts to a known LW0 dB error0 dB±0.000000001 dB0 dB0.0 %
CumpleISO 3744:2010 Eq. 23 / clause 3.4 NOTE 1 Sound energy level of a source steady over T = 10 s is LW + 10 lg(T/T0)LJ - LW = 10 dB, 0 dB error0 dB±0.000000001 dB0 dB0.0 %
CumpleISO 3744:2010 Eq. 20 One measurement encompassing Ne = 5 events is 10 lg 5 above one event6.9897 dB6.9897 dB±1.00e-12 dB0 dB0.0 %
CumpleISO 3741:2010 Eq. 30 Reverberation-room sound energy level inverts to a known LJ0 dB error0 dB±0.000000001 dB0 dB0.0 %
CumpleISO 3741:2010 Eq. F.4 Three equal one-third-octave bands sum to an octave level 10 lg 3 higher4.771213 dB4.771213 dB±1.00e-12 dB0 dB0.0 %
CumpleISO 3744:2010 Annex G / H.4.2.7 C1 + C2 of Eq. (G.1)/(G.3) vanish at 120 m altitude and 23 C0 dB-0.00005 dB±0.001 dB-0.00005 dB5.0 %
CumpleISO 9614-1:1993 Table B.2 Criterion-2 factor C per band and grade, and the A-weighted grade-3 value59 tabulated values of C reproducedmax absolute deviation 0.000±000.0 %
CumpleISO 9614-1:1993 Table 2 Standard deviation s of the determination per band and grade59 tabulated values of s reproducedmax absolute deviation 0.000 dB±0 dB0 dB0.0 %
CumpleISO 9614-1:1993 Table B.1 Error factor Delta: 0.20 and 0.29 for all bands, 0.60 A-weightedprecision (all bands) = 0.2; engineering (all bands) = 0.29; survey (A-weighted) = 0.6precision (all bands) = 0.2; engineering (all bands) = 0.29; survey (A-weighted) = 0.6±000.0 %
CumpleISO 9614-1:1993 Eq. (12) Discrete positions tiling a scanned surface give the same LW0 dB error0 dB±0.000000000001 dB0 dB0.0 %
CumpleISO 9614-1:1993 Table B.3 Five action codes, each reached by the case Figure B.1 routes to itF1 > 0.6 -> e; F2 > Ld -> ab; (F3 - F2) > 3 dB -> ab; criterion 2, 1 dB <= (F3 - F2) <= 3 dB -> c; criterion 2, (F3 - F2) <= 1 dB -> dF1 > 0.6 -> e; F2 > Ld -> ab; (F3 - F2) > 3 dB -> ab; criterion 2, 1 dB <= (F3 - F2) <= 3 dB -> c; criterion 2, (F3 - F2) <= 1 dB -> d-0 of 5 rows disagree-
CumpleISO 9614-1:1993 Eq. (B.4) New positions N* on the concentrated subset of the measurement surfaceN* = 5 positionsN* = 5 positions±000.0 %
CumpleISO 3747:2010 9.5 EXAMPLE Expanded uncertainty U = 2 sqrt(1.5^2 + 2^2) dB, grade 2 with sigma_omc = 2.0 dB5 dB5 dB±1.00e-12 dB0 dB0.0 %
CumpleISO 3747:2010 Table 2 / Eq. 22 sigma_R0 by grade: 1.5 dB (grade 2) and 4.0 dB (grade 3), sigma_tot of Table E.1 row 2sigma_R0 grade 2 = 1.5 dB; sigma_R0 grade 3 = 4 dB; sigma_tot (1.5; 4) = 4.3 dBsigma_R0 grade 2 = 1.5 dB; sigma_R0 grade 3 = 4 dB; sigma_tot (1.5; 4) = 4.3 dB±0 dB0 dB0.0 %
CumpleISO 3747:2010 Eq. 7 / 8.1 K1 at the 6 dB validity margin, -10 lg(1 - 10^-0.6) = 1.2563 dB, and the 1.3 dB cap below itK1(6 dB) = 1.2563 dB, K1(2 dB) = 1.3 dB, 4 kHz flagged0 dB±0.000000001 dB0 dB0.0 %
CumpleISO 3747:2010 Eq. 11 comparado con ISO 3741:2010 Eq. 21 In situ comparison plus C2 equals the reverberation-room comparison (closed form)0 dB difference0 dB±0.000000001 dB0 dB0.0 %
CumpleISO 3747:2010 Eq. 12 / Eq. 20 m identical reference-source locations collapse to Eq. 11 / Eq. 19 (closed form)0 dB difference0 dB±0.000000001 dB0 dB0.0 %
CumpleISO 3747:2010 Eq. 15 / Eq. 17 N events one at a time and one measurement over N events agree (closed form)0 dB difference0 dB±0.000000001 dB0 dB0.0 %
CumpleISO 3747:2010 Annex C C2 at 101.325 kPa and 23.0 degC is 15 lg(296.15/296) = 0.003 300 dB (theta_ref = 296 K)0.0033 dB0.0033 dB±1.00e-9 dB0 dB0.0 %
CumpleISO 3747:2010 Eq. C.2 Static pressure at 500 m, 101.325 (1 - 2.2560e-5 x 500)^5.2553 kPa95.4609 kPa95.4609 kPa±1.00e-9 kPa0 kPa0.0 %
CumpleISO 3747:2010 Table D.1 / Eq. D.1 LWA of a flat 90 dB octave spectrum, 63 Hz to 8 kHz, with the printed Ck96.9871 dB96.9871 dB±1.00e-9 dB0 dB0.0 %
CumpleISO 3747:2010 Eq. A.1 Excess over the spherical free field Lp = LW - 11 - 20 lg(r/r0): a level 7 dB above it reads dLf = 7 dB7 dB7 dB±1.00e-12 dB0 dB0.0 %
CumpleISO 9295:2015 Table 1 nombra además UNE-EN ISO 9295:2015 PDF page 15, printed folio 15 Air absorption alpha in Np/m, 18 degC to 22 degC, 40 % to 60 %, 10 000 Hz to 22 400 Hz: Annex A at theta + 273.16 K, to the four decimals printed, in the 303 cells the table prints correctly303/303 cells of Table 1303/303 cells of Table 1±000.0 %
CumpleISO 9295:2015 Table 2 nombra además UNE-EN ISO 9295:2015 PDF page 16, printed folio 16 Air absorption alpha in Np/m, 23 degC to 27 degC, 40 % to 60 %, 10 000 Hz to 22 400 Hz: Annex A at theta + 273.16 K, to the four decimals printed, in the 278 cells the table prints correctly278/278 cells of Table 2278/278 cells of Table 2±000.0 %
CumpleISO 9295:2015 Table 1 nombra además UNE-EN ISO 9295:2015 PDF page 15, printed folio 15 The 9 cells Table 1 misprints (docs/ERRATA.md), as printed: each is Annex A at theta + 273.16 K with its first trailing 0 set as the digit before it13 500 Hz, 20 degC, 60 %: 0,027 7; 13 500 Hz, 21 degC, 40 %: 0,036 6; 13 500 Hz, 21 degC, 60 %: 0,026 6; 13 500 Hz, 22 degC, 40 %: 0,035 5; 15 500 Hz, 22 degC, 40 %: 0,044 4; 16 500 Hz, 21 degC, 50 %: 0,043 3; 18 000 Hz, 20 degC, 60 %: 0,045 5; 19 000 Hz, 21 degC, 60 %: 0,048 8; 20 000 Hz, 22 degC, 60 %: 0,051 19/9 printed cells that are Annex A with a 0 set as the digit before it±000.0 %
CumpleISO 9295:2015 Table 2 nombra además UNE-EN ISO 9295:2015 PDF page 16, printed folio 16 The 34 cells Table 2 misprints (docs/ERRATA.md), as printed: each is Annex A at theta + 273.16 K with its first trailing 0 set as the digit before it10 000 Hz, 27 degC, 50 %: 0,014 4; 11 000 Hz, 25 degC, 50 %: 0,018 8; 11 500 Hz, 23 degC, 50 %: 0,021 1; 13 000 Hz, 25 degC, 60 %: 0,021 1; 13 500 Hz, 27 degC, 60 %: 0,021 1; 14 000 Hz, 24 degC, 40 %: 0,035 5; 14 000 Hz, 24 degC, 60 %: 0,025 5; 14 500 Hz, 24 degC, 50 %: 0,031 1; 14 500 Hz, 25 degC, 40 %: 0,036 6; 14 500 Hz, 25 degC, 50 %: 0,033 0; 14 500 Hz, 27 degC, 50 %: 0,028 8; 14 500 Hz, 27 degC, 60 %: 0,024 4; 15 000 Hz, 24 degC, 50 %: 0,033 3; 15 500 Hz, 24 degC, 50 %: 0,035 5; 15 500 Hz, 27 degC, 40 %: 0,038 8; 16 000 Hz, 24 degC, 40 %: 0,044 4; 16 000 Hz, 24 degC, 60 %: 0,032 2; 16 500 Hz, 23 degC, 60 %: 0,035 5; 17 000 Hz, 25 degC, 50 %: 0,04 4; 18 000 Hz, 23 degC, 60 %: 0,041 1; 18 000 Hz, 27 degC, 60 %: 0,036 6; 18 500 Hz, 24 degC, 40 %: 0,056 6; 18 500 Hz, 24 degC, 50 %: 0,048 8; 19 500 Hz, 23 degC, 50 %: 0,054 4; 20 000 Hz, 24 degC, 60 %: 0,048 8; 20 500 Hz, 23 degC, 40 %: 0,067 7; 20 500 Hz, 24 degC, 40 %: 0,066 6; 21 000 Hz, 23 degC, 60 %: 0,054 4; 21 500 Hz, 23 degC, 40 %: 0,072 2; 21 500 Hz, 24 degC, 40 %: 0,071 1; 21 500 Hz, 27 degC, 60 %: 0,05 50; 22 000 Hz, 24 degC, 60 %: 0,057 7; 22 000 Hz, 25 degC, 50 %: 0,063 3; 22 400 Hz, 25 degC, 50 %: 0,065 534/34 printed cells that are Annex A with a 0 set as the digit before it±000.0 %
CumpleISO 9295:2015 Annex A / Tables 1 and 2 The published Annex A at theta + 273.15 K against the 581 correctly printed cells: within one unit of the fourth decimal0 Np/m0.000063 Np/m±0.0001 Np/m0.000063 Np/m63 %
CumpleISO 9295:2015 Formulae (4) and (5) Room absorption coefficient and room constant from the reverberation time, V = 200 m3, S = 210 m2, T = 0.70 s: alpha_room = 1 - exp(-0.16 V/(S T)), R = S alpha_room / (1 - alpha_room) (closed form)alpha_room = 0.1956; R (m2) = 51.0716alpha_room = 0.1956; R (m2) = 51.0716±000.0 %
CumpleISO 9295:2015 Formula (7) Room constant from the air absorption, 8 alpha V / (1 - 8 alpha V / S), at 16 kHz, 23 degC, 50 %, V = 200 m3, S = 210 m2 (closed form)86.5581 m²86.5581 m²±1.00e-9 m²0 m²0.0 %
CumpleISO 9295:2015 Formula (6) / 10.1 LW = Lp(ST) - 10 lg(4/R) + C1 + C2: R = 40 m2 raises Lp = 60 dB by 10 dB, plus the C1 and C2 of ISO 3741 at 23 degC and 101.325 kPa and at 30 degC and 90 kPa23 degC, 101.325 kPa = 69.8762 dB; 30 degC, 90 kPa = 71.1086 dB23 degC, 101.325 kPa = 69.8762 dB; 30 degC, 90 kPa = 71.1086 dB±0 dB0 dB0.0 %
CumpleISO 9295:2015 Formulae (8) and (9) Reference source: LW(FAR) - Lp(FAR) + Lp(ST), and 10 lg(Delta F / 1 Hz) more for a tone read with a 10 Hz noise bandwidthFormula (8) = 60.0033 dB; Formula (9) = 70.0033 dBFormula (8) = 60.0033 dB; Formula (9) = 70.0033 dB±0 dB0 dB0.0 %
CumpleISO 9295:2015 Formulae (2) and (3) Moving microphone: Delta f = 2 f v / c at 16 kHz, 0.4 m/s, 345 m/s, and three equal sidebands summing to 10 lg 3 above oneDelta f (Hz) = 37.1014; Ltot (dB) = 54.7712Delta f (Hz) = 37.1014; Ltot (dB) = 54.7712±000.0 %
CumpleISO 9295:2015 Formula (10) Free-field absorption correction K_alpha = r alpha at r = 4 m, alpha in dB/m (8.686 times Annex A), and none at r = 2 m0 dB difference0 dB±1.00e-12 dB0 dB0.0 %
CumpleISO 9295:2015 Table 3 nombra además UNE-EN ISO 9295:2015 PDF page 24, printed folio 24 The sound power levels to determine for each type of noise: the six rows, from the A-weighted level alone to the tones within 10 dB of the highest6/6 rows of Table 36/6 rows of Table 3±000.0 %
CumpleISO 5136:2003 Table D.1 C3,4 of the sampling tube for d = 0.5 m at U = +/-5, +/-15, +/-30 m/s, 27 bands162 tabulated values reproduced to the printed 0.1 dBmax absolute deviation 0.049 dB±0.05 dB0.049 dB98 %
CumpleISO 5136:2003 Eqs (D.2)/(D.3) Worked example: C3,4 = (1.85 + 0.038 U) dB at 1 kHz, U = +15 and -15 m/s2.42 dB at +15 m/s and 1.28 dB at -15 m/s reproducedmax absolute deviation below 1e-12 dB±0.000000001 dB0 dB0.0 %
CumpleISO 5136:2003 Eq. (8) Nose-cone / foam-ball correction 10 lg[1/(1 - U/c)^2] at U = 20 m/s, c = 340 m/s0.52658 dB0.52658 dB±1.00e-9 dB0 dB0.0 %
CumpleISO 5136:2003 Eq. (12) Plane-wave relation LW - Lp = 10 lg(S/S0) - 10 lg(rho c/400), d = 0.5 m-7.2113 dB-7.2113 dB±0.00000100 dB0 dB0.0 %
CumpleISO 5136:2003 Table 2 / Table 3 Reproducibility sigma_R per band, 50 Hz to 10 kHz, and the extrapolated 12.5 to 20 kHz27 tabulated values of sigma_R reproducedmax absolute deviation 0.000 dB±0 dB0 dB0.0 %
CumpleISO 5136:2003 Annex C Table C.1 A-weighting C_j of the 27 bands, read back as LWA - LW of one band at a time27 tabulated values of C_j reproducedmax absolute deviation below 1e-12 dB±0.000000001 dB0 dB0.0 %
CumpleISO 3891:1978 Annex A Table 9 nombra además ISO 8297:1994 10.7 alpha at 15 °C and 70 % in the octave-centre bands 63 Hz to 8 kHz by the weather path of ISO 8297 10.7, through the shared SAE ARP 866A transcription, against ISO 3891 Table 9 (printed in dB/100 m to one decimal); ISO 8297 Table 3 prints other values at 125 Hz, 4 kHz and 8 kHz63 Hz = 0 dB/m; 125 Hz = 0.001 dB/m; 250 Hz = 0.001 dB/m; 500 Hz = 0.002 dB/m; 1000 Hz = 0.005 dB/m; 2000 Hz = 0.01 dB/m; 4000 Hz = 0.025 dB/m; 8000 Hz = 0.061 dB/m63 Hz = 0 dB/m; 125 Hz = 0.001 dB/m; 250 Hz = 0.001 dB/m; 500 Hz = 0.002 dB/m; 1000 Hz = 0.005 dB/m; 2000 Hz = 0.01 dB/m; 4000 Hz = 0.025 dB/m; 8000 Hz = 0.061 dB/m±0 dB/m0 dB/m0.0 %
CumpleISO 8297:1994 Table 3 alpha at 15 °C and 70 % by ISO 3891 Annex A, to the printed digit, in the five rows it reproduces (63 Hz, 250 Hz to 2 kHz; 125 Hz, 4 kHz and 8 kHz are printed otherwise, see the guide)63 Hz = 0 dB/m; 250 Hz = 0.001 dB/m; 500 Hz = 0.002 dB/m; 1000 Hz = 0.005 dB/m; 2000 Hz = 0.01 dB/m63 Hz = 0 dB/m; 250 Hz = 0.001 dB/m; 500 Hz = 0.002 dB/m; 1000 Hz = 0.005 dB/m; 2000 Hz = 0.01 dB/m±0 dB/m0 dB/m0.0 %
CumpleISO 8297:1994 10.5 NOTE 11 Proximity term lg(d/(4 sqrt(Sp))) at the two ends 0.5 and 0.05 of 9.1.1 a), to the printed decimal: -0.9 dB and -1.9 dBd/sqrt(Sp) = 0.5 = -0.9 dB; d/sqrt(Sp) = 0.05 = -1.9 dBd/sqrt(Sp) = 0.5 = -0.9 dB; d/sqrt(Sp) = 0.05 = -1.9 dB±0 dB0 dB0.0 %
CumpleISO 8297:1994 Table 2 Background correction at differences of 6 to 10 dB and at 12 dB, read through plant_background_correction6 dB = 1 dB; 7 dB = 1 dB; 8 dB = 1 dB; 9 dB = 0.5 dB; 10 dB = 0.5 dB; 12 dB = 0 dB6 dB = 1 dB; 7 dB = 1 dB; 8 dB = 1 dB; 9 dB = 0.5 dB; 10 dB = 0.5 dB; 12 dB = 0 dB±0 dB0 dB0.0 %
CumpleISO 8297:1994 Table 1 Uncertainty of the method, 95 % interval (lower, upper), at the four printed ratios d/sqrt(Sp)0.05 lower = -3.5 dB; 0.05 upper = 3 dB; 0.1 lower = -2.5 dB; 0.1 upper = 2.5 dB; 0.2 lower = -2.5 dB; 0.2 upper = 2 dB; 0.5 lower = -2 dB; 0.5 upper = 1.5 dB0.05 lower = -3.5 dB; 0.05 upper = 3 dB; 0.1 lower = -2.5 dB; 0.1 upper = 2.5 dB; 0.2 lower = -2.5 dB; 0.2 upper = 2 dB; 0.5 lower = -2 dB; 0.5 upper = 1.5 dB±0 dB0 dB0.0 %
CumpleISO 8297:1994 10.4 / 10.8 Point source on the ground at the centre of a circular contour: L_W(ISO 8297) - L_W(source) = 10 lg((R^2 + R h)/(R^2 + h^2)), 0 as h tends to 0 (closed form, R = 150 m, h = 5 m)0.137582 dB0.137581 dB±0.00001 dB-0.000001 dB10.0 %
CumpleISO 8297:1994 9.1.1 b) Aspect angle of a unit square seen from (0.5; -d): 180 - 2 atan(2 d) degrees at d = 0.1, 0.5 and 2 (closed form)0 deg0 deg±0.000000001 deg0 deg0.0 %
CumpleISO 3743-1:2010 9.5 EXAMPLE Expanded uncertainty U = 2 sqrt(1.5^2 + 2^2) dB = 5 dB, sigma_omc = 2.0 dB5 dB5 dB±1.00e-12 dB0 dB0.0 %
CumpleISO 3743-1:2010 Table 3 Typical upper bounds of sigma_R0 per octave band and A-weighted (the '400 to 5 000' row read as 500 Hz to 4 kHz)125 Hz = 3 dB; 250 Hz = 2 dB; 500 Hz = 1.5 dB; 1 kHz = 1.5 dB; 2 kHz = 1.5 dB; 4 kHz = 1.5 dB; 8 kHz = 2.5 dB; A = 1.5 dB125 Hz = 3 dB; 250 Hz = 2 dB; 500 Hz = 1.5 dB; 1 kHz = 1.5 dB; 2 kHz = 1.5 dB; 4 kHz = 1.5 dB; 8 kHz = 2.5 dB; A = 1.5 dB±0 dB0 dB0.0 %
CumpleISO 3743-1:2010 Table C.1 Total standard deviation of the grade 2 row, sigma_R0 = 1.5 dB, for sigma_omc = 0.5, 2 and 4 dBsigma_omc 0.5 = 1.6 dB; sigma_omc 2 = 2.5 dB; sigma_omc 4 = 4.3 dBsigma_omc 0.5 = 1.6 dB; sigma_omc 2 = 2.5 dB; sigma_omc 4 = 4.3 dB±0 dB0 dB0.0 %
CumpleISO 3743-1:2010 Eq. 13 / 8.1.3 K1 at the 6 dB margin is -10 lg(1 - 10^-0.6) = 1.2563 dB, 1.3 dB below it and 0 above 15 dBK1(6 dB) = 1.2563 dB; K1(4 dB) = 1.3 dB; K1(15.5 dB) = 0 dBK1(6 dB) = 1.2563 dB; K1(4 dB) = 1.3 dB; K1(15.5 dB) = 0 dB±0 dB0 dB0.0 %
CumpleISO 3743-1:2010 Eq. 14 comparado con ISO 3747:2010 Eq. 11 The hard-walled comparison and the in situ comparison give the same LW with the background negligible (closed form)0 dB difference0 dB±0.000000001 dB0 dB0.0 %
CumpleISO 3743-1:2010 Eq. 20 / clause 3.4 NOTE 1 A source steady over T = 10 s: LJ = LW + 10 lg(T/T0) band for band, background carried over the same T0 dB difference0 dB±0.000000001 dB0 dB0.0 %
CumpleISO 3743-1:2010 Eq. 15 / Eq. 16 Ne events one at a time and one measurement over Ne events agree (closed form)0 dB difference0 dB±0.000000001 dB0 dB0.0 %
CumpleISO 3743-1:2010 Annex A C2 at 500 m and 23.0 degC from Eq. (A.2): 0.26 dB (not the 0.4 dB of C.4.2.5)0.26 dB0.2622 dB±0.005 dB0.0022 dB44 %
CumpleISO 3743-1:2010 Table B.1 / Eq. B.1 LWA of a flat 90 dB octave spectrum, 63 Hz to 8 kHz, with the printed Ck96.9871 dB96.9871 dB±1.00e-9 dB0 dB0.0 %
CumpleISO 3743-1:2010 4.2 Room volume and reference box: 40 m3 and 40 boxes; 1.0 m up to 100 m3, 2.0 m above6/6 room and box verdicts6/6 room and box verdicts±000.0 %
CumpleISO 3743-1:2010 Table 2 Source locations from sM: 1 up to 2.5 dB, 2 up to 4.0 dB, 2 plus 2 in another room above3/3 Table 2 rows3/3 Table 2 rows±000.0 %
CumpleISO 3743-1:2010 Eq. 24 corroborado por ISO 3743-2:2018 Formula 14 sigma'_R0 = sqrt(sigma'_tot^2 - sigma'_omc^2) = 2.0 dB for 2.5 dB and 1.5 dB (the minus of Part 1; Part 2 prints a plus)2 dB2 dB±1.00e-12 dB0 dB0.0 %
CumpleISO 3743-1:2010 4.5 comparado con ISO 11546-2:1995 Table C.1 The 6 dB background margin the determination holds to is the one ISO 11546-2 tabulates for ISO 3743-1ISO 3743-1 4.5 = 6 dB; ISO 11546-2 Table C.1 = 6 dBISO 3743-1 4.5 = 6 dB; ISO 11546-2 Table C.1 = 6 dB±0 dB0 dB0.0 %
CumpleISO 3743-2:2018 11.5 EXAMPLE Expanded uncertainty U = 2 sqrt(2^2 + 2^2) dB = 5.7 dB, sigma_omc = 2.0 dB5.7 dB5.6569 dB±0.05 dB-0.0431 dB86 %
CumpleISO 3743-2:2018 Table 5 Typical upper bounds of sigma_R0 per octave band and A-weighted125 Hz = 5 dB; 250 Hz = 3 dB; 500 Hz = 2 dB; 1 kHz = 2 dB; 2 kHz = 2 dB; 4 kHz = 2 dB; 8 kHz = 3 dB; A = 2 dB125 Hz = 5 dB; 250 Hz = 3 dB; 500 Hz = 2 dB; 1 kHz = 2 dB; 2 kHz = 2 dB; 4 kHz = 2 dB; 8 kHz = 3 dB; A = 2 dB±0 dB0 dB0.0 %
CumpleISO 3743-2:2018 Table D.1 Total standard deviation of the grade 2 row, sigma_R0 = 2 dB, for sigma_omc = 0.5, 2.0 and 4.0 dBsigma_omc 0.5 = 2.1 dB; sigma_omc 2.0 = 2.8 dB; sigma_omc 4.0 = 4.5 dBsigma_omc 0.5 = 2.1 dB; sigma_omc 2.0 = 2.8 dB; sigma_omc 4.0 = 4.5 dB±0 dB0 dB0.0 %
CumpleISO 3743-2:2018 Formula 1 / Formula B.2 R at 1 000 Hz for a 70 m3 room is the 1.06 of Formula (B.2)1.061.0624±0.0050.002448 %
CumpleISO 3743-2:2018 Formula B.2 A room that follows the curve exactly centres on Tnom = T1000 / R(1 000 Hz) (closed form)0.753041 s0.753041 s±1.00e-12 s0 s0.0 %
CumpleISO 3743-2:2018 B.5 EXAMPLE T1000 = 0.8 s on the curve of Figure B.4: the printed T/Tnom = 1.09 is the midpoint of the extreme ratios against 0.9 and 1.1 alone (within 0.015), and as Tnom = 0.73 s it puts 250 Hz above 1.1 R; the library's centring qualifies the room at 0.76 s, a departure of 0.17 dB in LW (see the errata)4/4 B.5 readings4/4 B.5 readings±000.0 %
CumpleISO 3743-2:2018 Clause 5 The noise source should not exceed 1 % of the room: 0.7 m3 in the minimum 70 m3 room is within the recommendation, 0.71 m3 is not, and neither moves the verdict2/2 clause 5 readings2/2 clause 5 readings±000.0 %
CumpleISO 3743-2:2018 6.3 Limiting curves 0.9 and 1.1 times R Tnom up to 6.3 kHz, 0.8 and 1.2 above6.3 kHz low = 0.9; 6.3 kHz high = 1.1; 8 kHz low = 0.8; 8 kHz high = 1.26.3 kHz low = 0.9; 6.3 kHz high = 1.1; 8 kHz low = 0.8; 8 kHz high = 1.2±000.0 %
CumpleISO 3743-2:2018 Table 1 Maximum permitted differences of the reference-source evaluation of 6.7125 Hz = 5 dB; 250 Hz = 3 dB; 500 Hz = 3 dB; 1 kHz = 3 dB; 2 kHz = 3 dB; 4 kHz = 3 dB; 8 kHz = 4 dB125 Hz = 5 dB; 250 Hz = 3 dB; 500 Hz = 3 dB; 1 kHz = 3 dB; 2 kHz = 3 dB; 4 kHz = 3 dB; 8 kHz = 4 dB±0 dB0 dB0.0 %
CumpleISO 3743-2:2018 6.7 / Table 1 Each band is suitable at its Table 1 difference read high or low, and not 0.1 dB beyond it on either side28/28 Table 1 verdicts28/28 Table 1 verdicts±000.0 %
CumpleISO 6926:2016 8.4 corroborado por ISO 3743-2:2018 6.7 The calibration as the suitability evaluation reads it at 20 degC and 90 kPa: one-third octaves of 76, 80 and 83 dB over the 2 m hemisphere, the 1 kHz octave their energy sum less the calibration's own C2 of 0.483 dB for a source of unknown radiation, dB (closed form)98.7 dB98.7 dB±1.00e-9 dB0 dB0.0 %
CumpleISO 3743-2:2018 6.7 / Table 1 With a calibration read at 20 degC and 90 kPa, each band is suitable at its Table 1 difference below the calibration and not 0.1 dB beyond it; with the calibration read at the default 23.0 degC and 101.325 kPa instead, 0.482 dB higher, the band at its limit is not21/21 Table 1 verdicts with a calibration21/21 Table 1 verdicts with a calibration±000.0 %
CumpleISO 6926:2016 8.4 corroborado por ISO 3743-1:2010 Eq. 14 corroborado por ISO 3743-2:2018 Formula 10 Both comparisons read a calibration at 20 degC and 90 kPa: the 1 kHz octave less its own C2 of 0.483 dB, plus the 4 dB the source under test is louder, and carried to the reference conditions by the 0.452 dB C2 of Annex A (Part 1) and Annex E (Part 2), dB (closed form)ISO 3743-1 LW = 102.1649 dB; ISO 3743-1 LW ref = 102.6167 dB; ISO 3743-2 LW = 102.1649 dB; ISO 3743-2 LW ref = 102.6167 dBISO 3743-1 LW = 102.1649 dB; ISO 3743-1 LW ref = 102.6167 dB; ISO 3743-2 LW = 102.1649 dB; ISO 3743-2 LW ref = 102.6167 dB±0 dB0 dB0.0 %
CumpleISO 3743-2:2018 Table 3 Minimum number of source locations for 3, 6 and 12 microphone positions, every band row and the A-weighted row45/45 Table 3 cells45/45 Table 3 cells±000.0 %
CumpleISO 3743-2:2018 Table 4 Background corrections: 2, 2, 1, 1, 1, 0.5, 0.5 dB for 4 dB to 10 dB, 0 above4 dB = 2 dB; 5 dB = 2 dB; 6 dB = 1 dB; 7 dB = 1 dB; 8 dB = 1 dB; 9 dB = 0.5 dB; 10 dB = 0.5 dB; 11 dB = 0 dB4 dB = 2 dB; 5 dB = 2 dB; 6 dB = 1 dB; 7 dB = 1 dB; 8 dB = 1 dB; 9 dB = 0.5 dB; 10 dB = 0.5 dB; 11 dB = 0 dB±0 dB0 dB0.0 %
CumpleISO 3743-2:2018 Formula 9 Direct method LW = Lp - 10 lg(Tnom/T0) + 10 lg(V/V0) - 13 dB in a 70 m3 room, Tnom = 0.73 s (closed form)0 dB difference0 dB±0.000000001 dB0 dB0.0 %
CumpleISO 3743-2:2018 Formula 10 comparado con ISO 3743-1:2010 Eq. 14 The comparison methods of the two parts agree with the background negligible (closed form)0 dB difference0 dB±0.000000001 dB0 dB0.0 %
CumpleISO 3743-2:2018 10.3 a) / Table 4 The reference levels take Table 4 before Formula (10): ST 75 dB, RSS 80 dB, LWr 90 dB and a 5 dB reference margin give Lpr 78 dB and LW 87 dB (closed form)87 dB87 dB±0.000000001 dB0 dB0.0 %
CumpleISO 3743-2:2018 Formula 2 H (theta + 5 degC) within +/-10 % of its value during the reverberation measurement: +10 % passes, +12 % fails, and 80 % at 10 degC passes against 50 % at 20 degC only through the 5 degC3/3 climate verdicts3/3 climate verdicts±000.0 %
Emission sound pressure level (ISO 11200 group) 8/8
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleISO 11200:2014 Table B.2 local environmental correction K_3A at a work station 1.6 m from the dominating source, dB3.7 dB3.749 dB±0.05 dB0.049 dB98 %
CumpleISO 11200:2014 Table B.2 emission sound pressure level L_pA at the work station, the energy mean less K_3A, dB73.2 dB73.176 dB±0.05 dB-0.024 dB48 %
CumpleISO 11200:2014 Table B.2 expanded uncertainty U from sigma_R0 = 1.5 dB and sigma_omc = 1.0 dB at k = 1.6, dB2.9 dB2.884 dB±0.05 dB-0.016 dB32 %
CumpleISO 11200:2014 Table B.3 background-noise correction K_1A for a 9 dB margin over the background, dB0.6 dB0.584 dB±0.05 dB-0.016 dB32 %
CumpleISO 11200:2014 Table B.3 operating standard deviation sigma_omc of three readings by Equation (C.1), dB2 dB1.997 dB±0.05 dB-0.003 dB6.0 %
CumpleISO 11200:2014 Table B.3 local environmental correction K_3A of ISO 11202 method A.2 from K_2A = 6.5 dB and DI*op,approx = 0.7 dB, dB4.7 dB4.693 dB±0.05 dB-0.007 dB14 %
CumpleISO 11200:2014 Table B.3 accuracy grade Grade of the method A.2 result for a machine 3 m in its largest dimensiongrade = 3grade = 3±000.0 %
CumpleISO 11204:2010 A.1.2 the two routes to the ratio z z from K_2 against z from the absorption area, dimensionless0.4234234230.423423423±1.00e-1200.0 %
Free-field qualification & reference sound sources 31/31
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleISO 26101:2017 Table A.1 corroborado por ISO 3745:2012/Amd.1:2017 Table A.1 Allowable deviation from the inverse square law, anechoic room, at 630, 800, 5 000 and 6 300 Hz, dB630 Hz = 1.5 dB; 800 Hz = 1 dB; 5000 Hz = 1 dB; 6300 Hz = 1.5 dB630 Hz = 1.5 dB; 800 Hz = 1 dB; 5000 Hz = 1 dB; 6300 Hz = 1.5 dB±0 dB0 dB0.0 %
CumpleISO 26101:2017 Table A.1 corroborado por ISO 3745:2012/Amd.1:2017 Table A.1 Allowable deviation from the inverse square law, hemi-anechoic room, at 630, 800, 5 000 and 6 300 Hz, dB630 Hz = 2.5 dB; 800 Hz = 2 dB; 5000 Hz = 2 dB; 6300 Hz = 3 dB630 Hz = 2.5 dB; 800 Hz = 2 dB; 5000 Hz = 2 dB; 6300 Hz = 3 dB±0 dB0 dB0.0 %
CumpleISO 26101:2017 Table B.1 Allowable deviation in directionality of the test source, anechoic and hemi-anechoic, at 630, 800, 6 300 and 12 500 Hz, dBanechoic 630 Hz = 1.5 dB; anechoic 800 Hz = 2 dB; anechoic 6300 Hz = 2.5 dB; anechoic 12500 Hz = 5 dB; hemi-anechoic 630 Hz = 2 dB; hemi-anechoic 800 Hz = 2.5 dB; hemi-anechoic 6300 Hz = 3 dB; hemi-anechoic 12500 Hz = 5 dBanechoic 630 Hz = 1.5 dB; anechoic 800 Hz = 2 dB; anechoic 6300 Hz = 2.5 dB; anechoic 12500 Hz = 5 dB; hemi-anechoic 630 Hz = 2 dB; hemi-anechoic 800 Hz = 2.5 dB; hemi-anechoic 6300 Hz = 3 dB; hemi-anechoic 12500 Hz = 5 dB±0 dB0 dB0.0 %
CumpleISO 3745:2012/Amd.1:2017 A.2.3 Frequencies evaluated from 100 Hz to 10 000 Hz: one-third octaves below 125 Hz and above 4 000 Hz, octave mid-bands between11/11 frequencies11/11 frequencies±000.0 %
CumpleISO 26101:2017 Formulae (2) and (4) An exact inverse-square field, six traverses 0.30 m to 3.00 m: the qualified radius is the end of the traverses, m (closed form)3 m3 m±1.00e-9 m0 m0.0 %
CumpleISO 26101:2017 Formulae (2) and (4) The same field: the largest deviation from the inverse square law, dB (closed form)0 dB0 dB±1.00e-9 dB0 dB0.0 %
CumpleISO 26101:2017 Formula (3) Starting value of b for L_pi = 85.0 / 80.5 / 76.0 / 73.5 dB at 0.5 / 1.0 / 1.5 / 2.0 m, the mean of 20 lg(r_i/r0) + L_pi, dB79.6305 dB79.6305 dB±1.00e-9 dB0 dB0.0 %
CumpleISO 26101:2017 Formulae (2) and (4) One incoherent reflection, rho^2 = 1 from a wall 2.5 m ahead, 1 kHz in an anechoic room: the qualified distance is the last point before D(r) - D(r1) = 2 dB, m (closed form)2.15 m2.15 m±1.00e-9 m0 m0.0 %
CumpleISO 26101:2017 Formulae (2) and (4) The same reflection: the spread of the deviations within the qualified distance equals the spread of the excess D(r), dB (closed form)1.9032 dB1.9032 dB±1.00e-9 dB0 dB0.0 %
CumpleISO 26101:2017 Formula (1) A source drifting by 0 to 0.8 dB along the traverse, seen by the monitor microphone: the largest deviation left after the correction, dB0 dB0 dB±1.00e-9 dB0 dB0.0 %
CumpleISO 6926:2016 Table 1 Largest standard deviation under repeatability conditions at 80, 160 and 200 Hz, read as the limit of a 3-repetition check, dB80 Hz = 0.8 dB; 160 Hz = 0.4 dB; 200 Hz = 0.2 dB80 Hz = 0.8 dB; 160 Hz = 0.4 dB; 200 Hz = 0.2 dB±0 dB0 dB0.0 %
CumpleISO 6926:2016 Formula (1) sigma_r of 80.0 / 80.2 / 79.9 dB about their energy average, dB (closed form)0.15277 dB0.15277 dB±1.00e-12 dB0 dB0.0 %
CumpleISO 6926:2016 Table 2 Standard deviation of reproducibility, one-third octave rows, three columns, 15 cells15/15 cells15/15 cells±000.0 %
CumpleISO 6926:2016 Annex A, Formulae (A.2) to (A.5) C2 at 30 degC and 95 kPa for a monopole below and above its knee, an aerodynamic dipole and a source of unknown radiation, dB (closed form)(A.2) = 0.4354 dB; (A.3) = 0.3318 dB; (A.4) = 0.5391 dB; (A.5) = 0.3577 dB(A.2) = 0.4354 dB; (A.3) = 0.3318 dB; (A.4) = 0.5391 dB; (A.5) = 0.3577 dB±0 dB0 dB0.0 %
CumpleISO 6926:2016 Formula (2) L_W of a uniform 80 dB over the 2 m hemisphere at the reference conditions, with a(f) = 0.01 dB/m, 1 kHz, dB (closed form)93.8971 dB93.8971 dB±1.00e-9 dB0 dB0.0 %
CumpleISO 6926:2016 5.4 Spectra at the edges of 5.4: a 12.0 dB range and a 3.0 dB step pass, 12.5 dB and 3.1 dB fail; extended to 50 Hz, steps of 4.0 dB pass and one of 4.1 dB fails, and with every step within 4 dB a 16.0 dB range passes and 16.5 dB fails12.0 dB range = 1; 12.5 dB range = 0; 3.0 dB step = 1; 3.1 dB step = 0; extended, 12 dB and 4 dB steps = 1; extended, a 4.1 dB step = 0; extended, 16.0 dB = 1; extended, 16.5 dB = 012.0 dB range = 1; 12.5 dB range = 0; 3.0 dB step = 1; 3.1 dB step = 0; extended, 12 dB and 4 dB steps = 1; extended, a 4.1 dB step = 0; extended, 16.0 dB = 1; extended, 16.5 dB = 0±000.0 %
CumpleISO 6926:2016 5.6.3 Recalibration limit, 2.83 times Table 1, at 80, 125 and 1 000 Hz, dB80 Hz = 2.264 dB; 125 Hz = 1.132 dB; 1000 Hz = 0.566 dB80 Hz = 2.264 dB; 125 Hz = 1.132 dB; 1000 Hz = 0.566 dB±0 dB0 dB0.0 %
CumpleISO 6926:2016 Table 1 At the edge of every row: three repetitions whose sigma_r of Formula (1) equals the limit pass and 0.01 dB more fail, at 80 Hz (0.8 dB), 160 Hz (0.4 dB) and 200 Hz (0.2 dB)80 Hz, 0.80 dB = 1; 80 Hz, 0.81 dB = 0; 160 Hz, 0.40 dB = 1; 160 Hz, 0.41 dB = 0; 200 Hz, 0.20 dB = 1; 200 Hz, 0.21 dB = 080 Hz, 0.80 dB = 1; 80 Hz, 0.81 dB = 0; 160 Hz, 0.40 dB = 1; 160 Hz, 0.41 dB = 0; 200 Hz, 0.20 dB = 1; 200 Hz, 0.21 dB = 0±000.0 %
CumpleISO 6926:2016 5.6.3 At the edge of every row of Table 1: a change of exactly 2.83 times it calls for no recalibration and 0.01 dB more does, at 80 Hz (2.264 dB), 125 Hz (1.132 dB) and 1 000 Hz (0.566 dB)80 Hz, 2.264 dB = 1; 80 Hz, 2.274 dB = 0; 125 Hz, 1.132 dB = 1; 125 Hz, 1.142 dB = 0; 1000 Hz, 0.566 dB = 1; 1000 Hz, 0.576 dB = 080 Hz, 2.264 dB = 1; 80 Hz, 2.274 dB = 0; 125 Hz, 1.132 dB = 1; 125 Hz, 1.142 dB = 0; 1000 Hz, 0.566 dB = 1; 1000 Hz, 0.576 dB = 0±000.0 %
CumpleISO 3745:2012/Amd.1:2017 A.2.5 Reflecting plane: an absorption coefficient of 0.06 passes and 0.07 fails; with 125 Hz the lowest band, a plane extending 0.75 m beyond the surface passes and 0.74 m fails, the 0.75 m binding over the 0.686 m quarter wavelength; with 100 Hz the lowest, the quarter wavelength of 0.857 5 m binds, and 0.857 5 m passes and 0.857 4 m fails0.06 = 1; 0.07 = 0; 0.75 m = 1; 0.74 m = 0; 0.857 5 m = 1; 0.857 4 m = 00.06 = 1; 0.07 = 0; 0.75 m = 1; 0.74 m = 0; 0.857 5 m = 1; 0.857 4 m = 0±000.0 %
CumpleISO 3745:2012/Amd.1:2017 A.3.3 Traverse paths: four fail, five and eight pass, nine fail; in a hemi-anechoic room a path 20 deg and 80 deg from the vertical passes, 19.9 deg and 80.1 deg fail4 traverses = 0; 5 traverses = 1; 8 traverses = 1; 9 traverses = 0; 19.9 deg = 0; 20 deg = 1; 80 deg = 1; 80.1 deg = 04 traverses = 0; 5 traverses = 1; 8 traverses = 1; 9 traverses = 0; 19.9 deg = 0; 20 deg = 1; 80 deg = 1; 80.1 deg = 0±000.0 %
CumpleISO 3745:2012/Amd.1:2017 A.4.3 Points within the radius: five traverses of 10 pass, five of 9 (45 in all) fail, and six of 10, 10, 10, 10, 10 and 9 fail; four of 13, 13, 12 and 12 (50 in all) pass and four of 13, 12, 12 and 12 (49 in all) fail; the spacing at 500 Hz, 100 mm passes and 101 mm fails, and at 125 Hz a tenth of a wavelength, 274.4 mm, passes and 274.5 mm fails5 x 10 = 1; 5 x 9 = 0; 5 x 10 + 9 = 0; 13, 13, 12, 12 = 1; 13, 12, 12, 12 = 0; 100 mm at 500 Hz = 1; 101 mm at 500 Hz = 0; 274.4 mm at 125 Hz = 1; 274.5 mm at 125 Hz = 05 x 10 = 1; 5 x 9 = 0; 5 x 10 + 9 = 0; 13, 13, 12, 12 = 1; 13, 12, 12, 12 = 0; 100 mm at 500 Hz = 1; 101 mm at 500 Hz = 0; 274.4 mm at 125 Hz = 1; 274.5 mm at 125 Hz = 0±000.0 %
CumpleISO 26101:2017 A.4.3 Spatial resolution: at 2 kHz, 25 mm passes and 26 mm fails; at 500 Hz, a tenth of a wavelength, 68.6 mm, passes and 68.7 mm fails25 mm at 2 kHz = 1; 26 mm at 2 kHz = 0; 68.6 mm at 500 Hz = 1; 68.7 mm at 500 Hz = 025 mm at 2 kHz = 1; 26 mm at 2 kHz = 0; 68.6 mm at 500 Hz = 1; 68.7 mm at 500 Hz = 0±000.0 %
CumpleISO 26101:2017 5.1.4.3 Traverse length at 100 Hz, a quarter wavelength of 0.857 5 m: a start at 0.857 5 m passes and 0.857 6 m fails; a run of 0.857 5 m passes and 0.857 4 m failsstart 0.857 5 m = 1; start 0.857 6 m = 0; run 0.857 5 m = 1; run 0.857 4 m = 0start 0.857 5 m = 1; start 0.857 6 m = 0; run 0.857 5 m = 1; run 0.857 4 m = 0±000.0 %
CumpleISO 26101:2017 5.1.2.2 c) Levels 6.0 dB above the background at every point pass, 5.9 dB fail6.0 dB = 1; 5.9 dB = 06.0 dB = 1; 5.9 dB = 0±000.0 %
CumpleISO 26101:2017 Table A.1 corroborado por ISO 3745:2012/Amd.1:2017 Table A.1 At the edge of every cell: a traverse whose deviations reach the limit either way qualifies to its last point, and 0.005 dB past it ends one point short; anechoic and hemi-anechoic, at 500 Hz, 1 000 Hz and 8 000 Hzanechoic 500 Hz, ±1.5 dB = 1; anechoic 500 Hz, past it = 0; anechoic 1000 Hz, ±1.0 dB = 1; anechoic 1000 Hz, past it = 0; anechoic 8000 Hz, ±1.5 dB = 1; anechoic 8000 Hz, past it = 0; hemi-anechoic 500 Hz, ±2.5 dB = 1; hemi-anechoic 500 Hz, past it = 0; hemi-anechoic 1000 Hz, ±2.0 dB = 1; hemi-anechoic 1000 Hz, past it = 0; hemi-anechoic 8000 Hz, ±3.0 dB = 1; hemi-anechoic 8000 Hz, past it = 0anechoic 500 Hz, ±1.5 dB = 1; anechoic 500 Hz, past it = 0; anechoic 1000 Hz, ±1.0 dB = 1; anechoic 1000 Hz, past it = 0; anechoic 8000 Hz, ±1.5 dB = 1; anechoic 8000 Hz, past it = 0; hemi-anechoic 500 Hz, ±2.5 dB = 1; hemi-anechoic 500 Hz, past it = 0; hemi-anechoic 1000 Hz, ±2.0 dB = 1; hemi-anechoic 1000 Hz, past it = 0; hemi-anechoic 8000 Hz, ±3.0 dB = 1; hemi-anechoic 8000 Hz, past it = 0±000.0 %
CumpleISO 26101:2017 Table B.1 At the edge of every cell: a test source whose extreme positions lie on the allowable deviation either way is uniform enough, and 0.01 dB past it is not; anechoic and hemi-anechoic, at 630, 800, 6 300 and 12 500 Hzanechoic 630 Hz, ±1.5 dB = 1; anechoic 630 Hz, past it = 0; anechoic 800 Hz, ±2.0 dB = 1; anechoic 800 Hz, past it = 0; anechoic 6300 Hz, ±2.5 dB = 1; anechoic 6300 Hz, past it = 0; anechoic 12500 Hz, ±5.0 dB = 1; anechoic 12500 Hz, past it = 0; hemi-anechoic 630 Hz, ±2.0 dB = 1; hemi-anechoic 630 Hz, past it = 0; hemi-anechoic 800 Hz, ±2.5 dB = 1; hemi-anechoic 800 Hz, past it = 0; hemi-anechoic 6300 Hz, ±3.0 dB = 1; hemi-anechoic 6300 Hz, past it = 0; hemi-anechoic 12500 Hz, ±5.0 dB = 1; hemi-anechoic 12500 Hz, past it = 0anechoic 630 Hz, ±1.5 dB = 1; anechoic 630 Hz, past it = 0; anechoic 800 Hz, ±2.0 dB = 1; anechoic 800 Hz, past it = 0; anechoic 6300 Hz, ±2.5 dB = 1; anechoic 6300 Hz, past it = 0; anechoic 12500 Hz, ±5.0 dB = 1; anechoic 12500 Hz, past it = 0; hemi-anechoic 630 Hz, ±2.0 dB = 1; hemi-anechoic 630 Hz, past it = 0; hemi-anechoic 800 Hz, ±2.5 dB = 1; hemi-anechoic 800 Hz, past it = 0; hemi-anechoic 6300 Hz, ±3.0 dB = 1; hemi-anechoic 6300 Hz, past it = 0; hemi-anechoic 12500 Hz, ±5.0 dB = 1; hemi-anechoic 12500 Hz, past it = 0±000.0 %
CumpleISO 6926:2016 Table B.1 Pressure and intensity sound power levels at the edges of the tolerance: 4.0 dB apart at 50 Hz and 1.0 dB at 315 Hz agree, 4.1 dB and 1.1 dB do not50 Hz, 4.0 dB = 1; 50 Hz, 4.1 dB = 0; 315 Hz, 1.0 dB = 1; 315 Hz, 1.1 dB = 050 Hz, 4.0 dB = 1; 50 Hz, 4.1 dB = 0; 315 Hz, 1.0 dB = 1; 315 Hz, 1.1 dB = 0±000.0 %
CumpleISO 6926:2016 5.2 corroborado por ISO 6926:2016 5.5 A change of 0.30 dB over the declared supply range passes and 0.31 dB fails; a highest directivity index of 6.0 dB passes and 6.1 dB fails0.30 dB = 1; 0.31 dB = 0; 6.0 dB = 1; 6.1 dB = 00.30 dB = 1; 0.31 dB = 0; 6.0 dB = 1; 6.1 dB = 0±000.0 %
CumpleISO 6926:2016 Formula (2) L_W of a uniform 80 dB over the 2 m hemisphere at 30 degC and 95 kPa, C1 and the C2 of a source of unknown radiation evaluated by hand, 1 kHz, dB (closed form)94.5636 dB94.5636 dB±1.00e-9 dB0 dB0.0 %
CumpleISO 6926:2016 8.4 corroborado por ISO 3741:2010 Eq. 21 A calibration read by an ISO 3741 comparison at 20 degC and 90 kPa: L_W less its own C2 at the test, 0.483 dB for a source of unknown radiation, plus 4 dB and ISO 3741's C2 of 0.452 dB, 1 kHz, dB (closed form)97.8454 dB97.8454 dB±1.00e-9 dB0 dB0.0 %
Service-equipment sound in buildings (ISO/DIS 16032:2023) 22/22
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleISO/DIS 16032:2023 Clause 9 Correction for a background 4 dB below2.2 dB2.2 dB±0.05 dB0.005 dB10.0 %
CumpleISO/DIS 16032:2023 Clause 9 Correction held at 2.2 dB below 4 dB3/3 bands held at 2.2 dB3/3 bands held at 2.2 dB±000.0 %
CumpleISO/DIS 16032:2023 Clause 9 Thresholds of 10 dB and 4 dB met by decimal levels2/2 bands placed as Clause 9 reads2/2 bands placed as Clause 9 reads±000.0 %
CumpleISO/DIS 16032:2023 Clause 9, Formulae (7) to (9) Correction from 4 dB to 10 dB is the energy subtraction0 dB0 dB±1.00e-9 dB0 dB0.0 %
CumpleISO/DIS 16032:2023 Annex A, Table A.1 A-weighting, one-third-octave and octave36/36 A-weighting cells of Table A.136/36 A-weighting cells of Table A.1±000.0 %
CumpleISO/DIS 16032:2023 Annex A, Table A.1 comparado con IEC 61672-1:2013 Table 3 C-weighting: printed cells kept, misprinted cells from IEC 61672-136/36 C-weighting cells: 26 as printed, 10 from IEC 61672-136/36 C-weighting cells±000.0 %
CumpleISO/DIS 16032:2023 Clause 10, Table 2 Reproducibility standard deviations38/38 cells of Table 238/38 cells of Table 2±000.0 %
CumpleISO/DIS 16032:2023 Formula (1) and 7.5 Band average of three readings, to 0.1 dB43.7 dB43.7 dB±1.00e-9 dB0 dB0.0 %
CumpleISO/DIS 16032:2023 Formula (5) and 7.7 Standardization by T = 2 T0 in 50 Hz to 5 000 Hz (octaves 63 Hz to 4 000 Hz) only0 dB0 dB±1.00e-9 dB0 dB0.0 %
CumpleISO/DIS 16032:2023 Formula (6) Normalization of an equivalent absorption area of 16 m² to A0 = 10 m² at 1 kHz42.0412 dB42.0412 dB±0.0001 dB-1.73e-7 dB0.3 %
CumpleISO/DIS 16032:2023 Formula (2) and 7.8 LA,eq of a flat 40 dB spectrum over 50 Hz to 5 000 Hz51.0004 dB51.0004 dB±1.00e-9 dB0 dB0.0 %
CumpleISO/DIS 16032:2023 Formula (3) and 7.8 LC,eq of a flat 40 dB spectrum over 25 Hz to 10 000 Hz53.5507 dB53.5507 dB±1.00e-9 dB0 dB0.0 %
CumpleISO/DIS 16032:2023 7.8 Single numbers rounded to whole decibels3/3 single numbers rounded as 7.8 reads3/3 single numbers rounded as 7.8 reads±000.0 %
CumpleISO/DIS 16032:2023 7.4.1 Position ladder at its thresholds8/8 stages decided as 7.4.1 reads8/8 stages decided as 7.4.1 reads±000.0 %
CumpleISO/DIS 16032:2023 7.2 and 7.3 Distances and heights of the positions at each limit26/26 limits decided as 7.2 and 7.3 read26/26 limits decided as 7.2 and 7.3 read±000.0 %
CumpleISO/DIS 16032:2023 7.9 Additional position for a source in the room3/3 positions placed as 7.9 reads3/3 positions placed as 7.9 reads±000.0 %
CumpleISO/DIS 16032:2023 7.2 Corner microphone at least 0.2 m from any obstacle3/3 obstacle distances judged as 7.2 reads3/3 obstacle distances judged as 7.2 reads±000.0 %
CumpleISO/DIS 16032:2023 Clause 5 Calibration deviating by more than 0.5 dB4/4 calibrations judged as Clause 5 reads4/4 calibrations judged as Clause 5 reads±000.0 %
CumpleISO/DIS 16032:2023 7.6 Background measured over approximately 30 s8/8 durations held to 30 s within a tolerance8/8 durations held to 30 s within a tolerance±000.0 %
CumpleISO/DIS 16032:2023 Clause 9, NOTE Varying background: maximum over 10 min to 15 min, 10 dB or more below7/7 cases judged as the NOTE reads7/7 cases judged as the NOTE reads±000.0 %
CumpleISO/DIS 16032:2023 Clause 9 Maximum less than 5 dB above the equivalent level in each period4/4 periods judged as Clause 9 reads4/4 periods judged as Clause 9 reads±000.0 %
CumpleISO/DIS 16032:2023 7.8, NOTE Calculated single numbers within 2 dB of the instrument4/4 comparisons judged as 7.8 reads4/4 comparisons judged as 7.8 reads±000.0 %
Building prediction & uncertainty 15/15
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleEN 12354-1:2000 Annex H.3 Airborne prediction R'w (direct + 12 flanking paths)R'w 52 dB (13 paths)R'w 52 dB (13 paths, 52.17)-+0.17 dB-
CumpleEN 12354-1:2000 Annex H.3 (paths) All 12 printed flanking-path values Rij,wmax abs(Rij,w - printed) <= 0.05 dB0.042 dB±0.05 dB0.042 dB84 %
CumpleEN 12354-1:2000 Formula (5b) / Annex H.3 DnT,w closure from R'w (both H.3 examples -> 54 dB)DnT,w 54 dB (printed 53.8/54.3)DnT,w 53.63 / 54.13 dB--0.17 dB vs printed-
CumpleEN 12354-2:2000 Annex E.3 Impact prediction L'n,w = Ln,w,eq - dLw + K45 dB (+/-0 dB)45 dB-0 dB-
CumpleEN 12354-2:2000 Formula (3) / Annex E.3 Standardized impact level L'nT,w (exact 0.032 V form -> 43 dB)L'nT,w 43 dB (exact 42.96; E.3 prints 42.8)L'nT,w 42.96 dB--0.001 dB-
CumpleEN 12354-3:2000 Annex F Facade airborne prediction (R'tr,s,w / D2m,nT,w single numbers)R'tr,s,w 31 (Ctr -3); D2m,nT,w 33 dBR'tr,s,w 31 (Ctr -3); D2m,nT,w 33 dB-0-
CumpleEN 12354-4:2000 Annex G / Formula (2) Radiated LW of a wall+door segment (side 1, low bands)LW 63/125 Hz [59.8, 61.2] dB (+/-0.1)LW [59.8, 61.2] dB-0.038 dB-
CumpleEN 12354-4:2000 Annex E / Table G.9 Exterior level of all four Table G.9 reception cellsLp 36,6 / 28,5 / 44,6 / 37,3 dB (+/-0.05)Lp 36.6 / 28.5 / 44.6 / 37.3 dB-0.046 dB-
CumpleISO 12999-1:2020 Table 2 Airborne band uncertainty, situation A @ 1 kHz1.8 dB1.8 dB±1.00e-9 dB0 dB0.0 %
CumpleISO 12999-1:2020 Annex B, Table B.2 One-decimal single numbers Rw / Rw+C50-5000 / Rw+Ctr,50-500057.4 / 56.4 / 51.1 dB57.4 / 56.4 / 51.1 dB-+0.00 dB-
CumpleISO 12999-1:2020 Annex B, Formulae (B.2)/(B.6) Single-number uncertainties (uncorrelated 0.6/0.8; correlated u(Rw) 1.9)u_uncorr 0.6 / 0.8 dB; u_corr(Rw) 1.9 dB0.60 / 0.79 dB; 1.90 dB--0.00 dB-
CumpleISO 12999-1:2020 Clause 8 / Table 8 Expanded uncertainty U = 1.96 u (95 % two-sided, Rw sit. A)2.352 dB2.352 dB±1.00e-9 dB0 dB0.0 %
CumpleISO 12999-2:2020 Table 4 / Formula (1) Absorption coefficient +/-U (k=2), reproducibility, 20 x 1/3-oct bandsU(k=2) = [0.33, 0.26, 0.22, 0.17, 0.13, 0.11, 0.09, 0.08, 0.08, 0.08, 0.08, 0.08, 0.08, 0.09, 0.09, 0.09, 0.1, 0.11, 0.13, 0.16]U(k=2) = [0.33, 0.26, 0.22, 0.17, 0.13, 0.11, 0.09, 0.08, 0.08, 0.08, 0.08, 0.08, 0.08, 0.09, 0.09, 0.09, 0.1, 0.11, 0.13, 0.16]-exact-
CumpleISO 12999-2:2020 Table 5 / Formula (4) Practical coefficient +/-U (k=2), reproducibility, 5 octave bandsU(k=2) = [0.09, 0.08, 0.08, 0.08, 0.1]U(k=2) = [0.09, 0.08, 0.08, 0.08, 0.1]-exact-
CumpleISO 12999-2:2020 Clause 7, Examples 1/2 Single-number U (k=2): alpha_w and DLalpha,NRDalpha_w +/-0.07, DLalpha +/-1.6 dBalpha_w +/-0.07, DLalpha +/-1.6 dB-exact-
Outdoor propagation & occupational exposure 10/10
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleISO 9613-1:1993 Table 1 Air attenuation @ 10 degC, 70 %, 1 kHz3.66 dB/km3.658 dB/km±0.01 dB/km-0.002 dB/km20 %
CumpleISO 9613-1:1993 Table 1 Air attenuation @ 0 degC, 20 %, 2 kHz34.6 dB/km34.64 dB/km±0.1 dB/km0.04 dB/km40 %
CumpleISO 9613-2:1996 Table 2 Atmospheric attenuation grid, 6 conditions x 8 octave bands, dB/kmall 48 cells within half a printed digitworst residual 0.939 x tolerance-0.939 x-
CumpleISO 9613-2:1996 Eq. (7) Geometrical divergence Adiv = 20 lg(d/d0) + 11 at 100 m51 dB51 dB±1.00e-9 dB0 dB0.0 %
CumpleISO 9613-2:1996 Table 3 Ground b'(0) porous limit -> Agr(250 Hz) = 2(-1.5 + 10.1)17.2 dB17.2 dB±0.00000100 dB0 dB0.0 %
CumpleISO 9613-2:1996 clause 7.4 Single-edge diffraction saturates at the 20 dB cap20 dB20 dB±1.00e-9 dB0 dB0.0 %
CumpleISO 9613-2:1996 clause 7.4 Double-edge diffraction saturates at the 25 dB cap25 dB25 dB±1.00e-9 dB0 dB0.0 %
CumpleISO 9612:2009 Annex D Task-based LEX,8h + U (welder day, case a)LEX,8h 84.3; U 2.7 dBLEX,8h 84.3; U 2.7 dB--0.01; +0.02 dB-
CumpleISO 9612:2009 Annex E Job-based LEX,8h + U (production line, 18 workers)LEX,8h 88.1; U 3.8 dBLEX,8h 88.2; U 3.8 dB-+0.06; -0.03 dB-
CumpleISO 9612:2009 Annex F Full-day LEX,8h + U (forklift drivers)LEX,8h 90.1; U 3.4 dBLEX,8h 90.1; U 3.4 dB-+0.02; +0.03 dB-
Materials: absorption, airflow & impedance 6/6
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleISO 11654:1997 Annex A.1 Weighted absorption alpha_w (no indicator)0.60 (class C, no indic.)0.60 (class C, '')-0-
CumpleISO 11654:1997 Annex A.2 Weighted absorption alpha_w with M indicator0.60(M)0.60(M)-0-
CumpleISO 9053-2:2020 Annex A.3 Thermal boundary-layer thickness b0.00183 m0.00183 m±0.00001 m0.00000485 m97 %
CumpleISO 9053-2:2020 Annex A.3 Effective ratio of specific heats kappa'1.371.37±0.0010.00025952 %
CumpleISO 10534-1:1996 Eqs (9)/(13)/(14) Absorption from standing-wave ratio s=3alpha 0.75 (+/-0), |r| 0.5alpha 0.75, |r| 0.5000-0-
CumpleISO 10534-2 Eq. (17) / Annex D Two-microphone round trip recovers a known reflection factorabs(r - (0.3-0.4j)) = 0 (identity, +/-1e-9)0±0.00000000100.0 %
Scattering & diffusion (ISO 17497) 14/14
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleISO 17497-1:2004 Eq (2) Reference speed of sound at 20 C343.2 m/s343.2 m/s±0.00000100 m/s0 m/s0.0 %
CumpleISO 17497-1:2004 Eqs (1)/(4)/(5) Scattering coefficient (synthetic chain)0.09310.0931±1.00e-900.0 %
CumpleISO 17497-1:2004 Annex A.5 Expanded uncertainty of scattering coefficient0.029710.02971±0.0000010000.0 %
CumpleISO 17497-2:2012 Formula (5) Directional diffusion coefficient (QRD, model arc)0.10990.1099±0.0000010000.0 %
CumpleISO 17497-2:2012 Formula (5) Directional diffusion coefficient (flat reference)0.00490.0049±0.0000010000.0 %
CumpleISO 17497-2:2012 Formula (7) Normalised diffusion coefficient (QRD, model arc)0.10550.1055±0.0000010000.0 %
CumpleCox & D'Antonio:3e App. B (2D BEM) Normalised diffusion d_n, N=7 QRD x 6 periods, 200 Hz band (low-band anchor)00.000380±0.0150.0003802.5 %
CumpleCox & D'Antonio:3e App. B (2D BEM) Normalised diffusion d_n, N=7 QRD x 6 periods, 250 Hz band (low-band anchor)0.010.001±0.015-0.00960 %
CumpleCox & D'Antonio:3e App. B (2D BEM) Normalised diffusion d_n, N=7 QRD x 6 periods, 315 Hz band (low-band anchor)0.010.002±0.015-0.00853 %
CumpleCox & D'Antonio:3e App. B (2D BEM) Normalised diffusion d_n, N=7 QRD x 6 periods, 400 Hz band (low-band anchor)0.010.008±0.015-0.00213 %
CumpleISO 17497-2:2012 Formula (8) Zenith area factor (radians convention)1.571051.57105±0.0000010000.0 %
CumpleCox & D'Antonio Eq (10.3) QRD deepest well depth (N=7, f0=500 Hz)0.196 m0.196 m±1.00e-12 m0 m0.0 %
CumpleCox & D'Antonio Eq (5.8) corroborado por ISO 17497-2 Formula (7) Flat-panel predicted normalised diffusion (self-reference zero)00±1.00e-1200.0 %
CumpleCox & D'Antonio Eq (5.8) corroborado por ISO 17497-2 Formula (7) QRD predicted normalised diffusion at 2 kHz (above flat panel)0.2080.208±1.00e-900.0 %
In-situ road absorption (ISO 13472) 3/3
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleISO 13472-1:2002 Clause 4.2 Geometrical-spreading factor Kr0.66670.6667±1.00e-1200.0 %
CumpleISO 13472-1:2002 Annex A Maximum-sampled-area radius1.3425 m1.3425 m±0.00000100 m0 m0.0 %
CumpleISO 13472-2:2010 Clause 5.4.1 Spot-tube upper usable frequency f_u1989.4 Hz1989.4 Hz±0.1 Hz0 Hz0.0 %
Precision sound power (ISO 3745 / 9614-3) 4/4
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleISO 3745:2012 Clause 10.5 EXAMPLE Expanded uncertainty U (k=2)4.123 dB4.123 dB±0.001 dB0 dB0.0 %
CumpleISO 3745:2012 Eq (11) K1 background floor (6 dB edge band)1.2563 dB1.2563 dB±0.0001 dB-0.00000423 dB4.2 %
CumpleISO 3745:2012 Eq (16) Meteorological C1 at 23 C reference-0.1282 dB-0.1282 dB±0.0001 dB3.15e-7 dB0.3 %
CumpleISO 9614-3:2002 Eqs (5)/(8)/(9) Uniform-intensity LW recovery80 dB80 dB±1.00e-9 dB0 dB0.0 %
Outdoor propagation quality assurance (ISO/TR 17534-3) 34/34
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleISO/TR 17534-3:2015 T01 Receiver band levels over ground G = 0, dB0 dB0.008 dB±0.05 dB0.008 dB16 %
CumpleISO/TR 17534-3:2015 T01 Receiver total level over ground G = 0, dB47.46 dB47.457 dB±0.05 dB-0.003 dB6.0 %
CumpleISO/TR 17534-3:2015 T01 Receiver A-weighted level over ground G = 0, dB44.29 dB44.293 dB±0.05 dB0.003 dB6.0 %
CumpleISO/TR 17534-3:2015 T02 Receiver band levels over ground G = 0.5, dB0 dB0.01 dB±0.05 dB0.01 dB20 %
CumpleISO/TR 17534-3:2015 T02 Receiver total level over ground G = 0.5, dB44.61 dB44.608 dB±0.05 dB-0.002 dB4.0 %
CumpleISO/TR 17534-3:2015 T02 Receiver A-weighted level over ground G = 0.5, dB41.53 dB41.526 dB±0.05 dB-0.004 dB8.0 %
CumpleISO/TR 17534-3:2015 T03 Receiver band levels over ground G = 1, dB0 dB0.008 dB±0.05 dB0.008 dB16 %
CumpleISO/TR 17534-3:2015 T03 Receiver total level over ground G = 1, dB42.8 dB42.8 dB±0.05 dB0.000337 dB0.7 %
CumpleISO/TR 17534-3:2015 T03 Receiver A-weighted level over ground G = 1, dB39.14 dB39.139 dB±0.05 dB-0.001 dB2.0 %
CumpleISO/TR 17534-3:2015 Table 3 Ground-projected path length dp, m194.16 m194.165 m±0.005 m0.005 m100 %
CumpleISO/TR 17534-3:2015 Table 3 Straight-line path length d3, m194.19 m194.188 m±0.005 m-0.002 m40 %
CumpleISO/TR 17534-3:2015 Table 3 Geometrical divergence Adiv, dB56.76 dB56.764 dB±0.05 dB0.004 dB8.0 %
CumpleISO/TR 17534-3:2015 Table 3 Middle-region overlap factor q (ISO 9613-2 Table 3, note 2)0.230.2275±0.005-0.002550 %
CumpleISO/TR 17534-3:2015 T04 Receiver band levels, flat ground of three kinds, general method, dB0 dB0.0124 dB±0.05 dB0.0124 dB25 %
CumpleISO/TR 17534-3:2015 T04 Receiver total level, flat ground of three kinds, general method, dB45.25 dB45.248 dB±0.05 dB-0.002 dB4.0 %
CumpleISO/TR 17534-3:2015 T04 Receiver A-weighted level, flat ground of three kinds, general method, dB42.23 dB42.227 dB±0.05 dB-0.003 dB6.0 %
CumpleISO/TR 17534-3:2015 T06 Receiver band levels, ground rising under the receiver, general method, dB0 dB0.0111 dB±0.05 dB0.0111 dB22 %
CumpleISO/TR 17534-3:2015 T06 Receiver total level, ground rising under the receiver, general method, dB43.85 dB43.85 dB±0.05 dB0.000251 dB0.5 %
CumpleISO/TR 17534-3:2015 T06 Receiver A-weighted level, ground rising under the receiver, general method, dB40.59 dB40.589 dB±0.05 dB-0.001 dB2.0 %
CumpleISO/TR 17534-3:2015 T05 Receiver band levels, flat ground of three kinds, alternative method, dB0 dB0.0075 dB±0.05 dB0.0075 dB15 %
CumpleISO/TR 17534-3:2015 T05 Receiver total level, flat ground of three kinds, alternative method, dB42.46 dB42.461 dB±0.05 dB0.001 dB2.0 %
CumpleISO/TR 17534-3:2015 T05 Receiver A-weighted level, flat ground of three kinds, alternative method, dB39.3 dB39.298 dB±0.05 dB-0.002 dB4.0 %
CumpleISO/TR 17534-3:2015 T07 Receiver band levels, ground rising under the receiver, alternative method, dB0 dB0.0088 dB±0.05 dB0.0088 dB18 %
CumpleISO/TR 17534-3:2015 T07 Receiver total level, ground rising under the receiver, alternative method, dB42.91 dB42.914 dB±0.05 dB0.004 dB8.0 %
CumpleISO/TR 17534-3:2015 T07 Receiver A-weighted level, ground rising under the receiver, alternative method, dB39.75 dB39.749 dB±0.05 dB-0.001 dB2.0 %
CumpleISO/TR 17534-3:2015 Table 8 (T04) Region ground factor Gs (source region) over three areas0.20.2±0.00500.0 %
CumpleISO/TR 17534-3:2015 Table 8 (T04) Region ground factor Gm (middle region) over three areas0.430.4261±0.005-0.003978 %
CumpleISO/TR 17534-3:2015 Table 8 (T04) Region ground factor Gr (receiver region) over three areas0.670.6703±0.0050.00036.0 %
CumpleISO/TR 17534-3:2015 Table 14 (T06) Region ground factor Gs (source region) over three areas0.90.9±0.00500.0 %
CumpleISO/TR 17534-3:2015 Table 14 (T06) Region ground factor Gm (middle region) over three areas0.60.5985±0.005-0.001530 %
CumpleISO/TR 17534-3:2015 Table 14 (T06) Region ground factor Gr (receiver region) over three areas0.370.3723±0.0050.002346 %
CumpleISO/TR 17534-3:2015 Table 14 (T06) Straight-line path length d3, m194.6 m194.6 m±0.005 m-0.000411 m8.2 %
CumpleISO/TR 17534-3:2015 Table 17 (T05) Mean path height hm over flat ground, m2.5 m2.4997 m±0.005 m-0.0003 m6.0 %
CumpleISO/TR 17534-3:2015 Table 17 (T07) Mean path height hm over a slope, m4.99 m4.9888 m±0.005 m-0.0012 m24 %
Outdoor sound software quality assurance (ISO 17534-1) 8/8
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleISO 17534-1:2015 Table C.1 Ranking position R(q0.1) of the 0.1-quantile, N = 20 to 5031/31 rows of Table C.131/31 rows of Table C.1±000.0 %
CumpleISO 17534-1:2015 Table C.1 Ranking position R(q0.9) of the 0.9-quantile, N = 20 to 5031/31 rows of Table C.131/31 rows of Table C.1±000.0 %
CumpleVDI 3723 Blatt 1:1993-05 Tables 5 and 6 Ranking positions of L_x,90 and L_x,10, the source of Table C.1, N = 20 to 5031/31 rows of Tables 5 and 631/31 rows of Tables 5 and 6±000.0 %
CumpleISO 17534-1:2015 Formulas (C.1) and (C.2) Ranking positions above 50 values, N = 51 to 1000950/950 sample sizes950/950 sample sizes±000.0 %
CumpleISO 17534-1:2015 C.4, EXAMPLE Ranking positions of 25 level differencesR(q0.1) = 2; R(q0.9) = 24R(q0.1) = 2; R(q0.9) = 24±000.0 %
CumpleISO 17534-1:2015 C.4, EXAMPLE Quantiles q0.1 and q0.9 of 25 level differences, dBq0.1 = -1 dB; q0.9 = 3 dBq0.1 = -1 dB; q0.9 = 3 dB±0 dB0 dB0.0 %
CumpleISO 17534-1:2015 Table B.2 Result inside tolerances, eight octave bands and the total of test case T XX9/9 rows answered "yes"9/9 rows answered "yes"±000.0 %
CumpleISO 17534-1:2015 Table A.5, note a; Table B.2 Width of each certified interval, twice the 0.05 dB tolerance9/9 rows of Table B.29/9 rows of Table B.2±000.0 %
Human vibration (ISO 8041 / 2631 / 5349) 30/30
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleISO 8041-1:2017 Table B.8 Wk design-goal factor at 6.31 Hz1.0541.0544±0.1%0.000438 %
CumpleISO 8041-1:2017 Table B.9 Wm design-goal factor at 1.585 Hz0.93420.9342±0.1%0.00003403.6 %
CumpleISO 8041-1:2017 Table 1 Wh factor at the 500 rad/s reference0.2020.202±0.15%0.00001936.4 %
CumpleISO 8041-1:2017 Table B.1 Wb design-goal factor at 6.31 Hz1.0541.0545±0.1%0.000547 %
CumpleISO 8041-1:2017 Table B.1 Wb design-goal factors at 1 / 100 Hzmax rel dev ≤ 0.1 %0.000267±0.0010.00026727 %
CumpleISO 8041-1:2017 Table 1 Wc factor at the 100 rad/s reference0.51450.5145±0.1%-0.00004809.3 %
CumpleISO 8041-1:2017 Table 1 + Table B.3 Wd factors at the 100 rad/s reference and 1 Hzmax rel dev ≤ 0.1 %0.000162±0.0010.00016216 %
CumpleISO 8041-1:2017 Table B.4 We design-goal factor at 8 Hz0.12630.1263±0.1%0.000048438 %
CumpleISO 8041-1:2017 Table B.5 Wf design-goal factors at 0.1585 / 0.1 Hzmax rel dev ≤ 0.1 %0.000098±0.0010.0000989.8 %
CumpleISO 8041-1:2017 Table B.7 Wj design-goal factors at 6.31 / 8 Hzmax rel dev ≤ 0.1 %0.00001±0.0010.000011.0 %
CumpleISO 8041-1:2017 Table 5 + Annex B All nine weightings inside the tolerance envelope (318 printed bands)0 bands outside the Table 5 tolerances0±000.0 %
CumpleISO 5349-2:2001 Example E.2.1 Single-tool daily exposure A(8)4.1 m/s²4.14 m/s²±0.05 m/s²0.037 m/s²74 %
CumpleISO 5349-2:2001 Example E.3 Forestry three-task A(8)3.6 m/s²3.61 m/s²±0.05 m/s²0.01 m/s²20 %
CumpleISO 5349-1:2001 Eq. (C.1) VWF 10 % lifetime Dy at A(8)=74 yr4.04 yr±0.1 yr0.042 yr42 %
CumpleDirective 2002/44/EC Art. 3 HAV/WBV action & limit valuesHAV 2.5/5.0, WBV 0.5/1.15 m/s^2HAV 2.5/5.0, WBV 0.5/1.15 m/s^2-0-
CumpleISO 8041-1:2017 5.6.6 + Annex B All nine band-limiting responses inside the Table 5 envelope (318 bands)0 bands outside the Table 5 tolerances0±000.0 %
CumpleISO 8041-1:2017 Annex B Wk band-limiting factor at 0.631 Hz0.92790.9279±0.1%-0.00003313.6 %
CumpleISO 8041-1:2017 Annex B Wf band-limiting factor at 0.3981 Hz0.92790.9279±0.1%0.00003874.2 %
CumpleISO 8041-1:2017 Annex B Wh band-limiting factor at 10 Hz0.92910.9291±0.1%-0.00001811.9 %
CumpleISO 8041-1:2017 Annex B Wm band-limiting factor at 1.259 Hz0.92910.9291±0.1%-0.00001811.9 %
CumpleISO 8041-1:2017 Table B.5 Wf design-goal factor at 0.3981 Hz, the cell Table 2 row 2 turns on0.38840.3884±0.1%-0.00002877.4 %
CumpleISO 8041-1:2017 Table 10 Running r.m.s. decay to 10 %, linear averaging, tau = 0.125 s0.124 s0.122 s±0.005 s-0.002 s40 %
CumpleISO 8041-1:2017 Table 10 Running r.m.s. decay to 10 %, linear averaging, tau = 1 s0.99 s0.983 s±0.05 s-0.007 s14 %
CumpleISO 8041-1:2017 Table 10 Running r.m.s. decay to 10 %, linear averaging, tau = 8 s7.92 s7.915 s±0.2 s-0.005 s2.5 %
CumpleISO 8041-1:2017 Table 11 Running r.m.s. decay to 10 %, exponential averaging, tau = 0.125 s0.58 s0.576 s±0.03 s-0.004 s13 %
CumpleISO 8041-1:2017 Table 11 Running r.m.s. decay to 10 %, exponential averaging, tau = 1 s4.61 s4.605 s±0.25 s-0.005 s2.0 %
CumpleISO 8041-1:2017 Table 11 Running r.m.s. decay to 10 %, exponential averaging, tau = 8 s36.8 s36.841 s±2 s0.041 s2.1 %
CumpleISO 8041-1:2017 Table 11 Equivalent decay rate, exponential averaging, tau = 0.125 s31 to 40 dB/s34.73 dB/s±4.5 dB/s-0.766 dB/s17 %
CumpleISO 8041-1:2017 Table 11 Equivalent decay rate, exponential averaging, tau = 1 s3.8 to 4.9 dB/s4.34 dB/s±0.55 dB/s-0.007 dB/s1.3 %
CumpleISO 8041-1:2017 Table 11 Equivalent decay rate, exponential averaging, tau = 8 s0.48 to 0.62 dB/s0.54 dB/s±0.07 dB/s-0.007 dB/s10.0 %
Human-vibration meter verification (ISO 8041-1) 44/44
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleISO 8041-1:2017 Table 4 Wk transition frequency ft1, Hz0.2512 Hz0.25119 Hz±0.02%-0.00001 Hz20 %
CumpleISO 8041-1:2017 Table 4 Wk transition frequency ft2, Hz0.631 Hz0.63096 Hz±0.02%-0.00004 Hz32 %
CumpleISO 8041-1:2017 Table 4 Wk transition frequency ft3, Hz63.1 Hz63.09573 Hz±0.02%-0.00427 Hz34 %
CumpleISO 8041-1:2017 Table 4 Wk transition frequency ft4, Hz158.5 Hz158.48932 Hz±0.02%-0.01068 Hz34 %
CumpleISO 8041-1:2017 Table 4 Wf transition frequency ft1, Hz0.05012 Hz0.05012 Hz±0.02%-0.00000128 Hz13 %
CumpleISO 8041-1:2017 Table 4 Wf transition frequency ft2, Hz0.1259 Hz0.12589 Hz±0.02%-0.00001 Hz40 %
CumpleISO 8041-1:2017 Table 4 Wf transition frequency ft3, Hz0.3981 Hz0.39811 Hz±0.02%0.00001 Hz13 %
CumpleISO 8041-1:2017 Table 4 Wf transition frequency ft4, Hz1 Hz1 Hz±0.02%0 Hz0.0 %
CumpleISO 8041-1:2017 Table 4 Wh transition frequency ft1, Hz3.981 Hz3.98107 Hz±0.02%0.00007 Hz8.8 %
CumpleISO 8041-1:2017 Table 4 Wh transition frequency ft2, Hz10 Hz10 Hz±0.02%0 Hz0.0 %
CumpleISO 8041-1:2017 Table 4 Wh transition frequency ft3, Hz794.3 Hz794.32823 Hz±0.02%0.02823 Hz18 %
CumpleISO 8041-1:2017 Table 4 Wh transition frequency ft4, Hz1995 Hz1995.26231 Hz±0.02%0.26231 Hz66 %
CumpleISO 8041-1:2017 Table 1 Wb reference frequency, Hz15.915 Hz15.9155 Hz±0.01%0.0005 Hz31 %
CumpleISO 8041-1:2017 Table 1 Wb weighted indication at the reference, m/s20.8126 m/s²0.81256 m/s²±0.1%-0.00004 m/s²4.9 %
CumpleISO 8041-1:2017 Table 1 Wd reference frequency, Hz15.915 Hz15.9155 Hz±0.01%0.0005 Hz31 %
CumpleISO 8041-1:2017 Table 1 Wd weighted indication at the reference, m/s20.1261 m/s²0.12608 m/s²±0.1%-0.00002 m/s²16 %
CumpleISO 8041-1:2017 Table 1 Wh reference frequency, Hz79.58 Hz79.5775 Hz±0.01%-0.0025 Hz31 %
CumpleISO 8041-1:2017 Table 1 Wh weighted indication at the reference, m/s22.02 m/s²2.02019 m/s²±0.1%0.00019 m/s²9.4 %
CumpleISO 8041-1:2017 Table 1 Wk reference frequency, Hz15.915 Hz15.9155 Hz±0.01%0.0005 Hz31 %
CumpleISO 8041-1:2017 Table 1 Wk weighted indication at the reference, m/s20.7718 m/s²0.77182 m/s²±0.1%0.00002 m/s²2.6 %
CumpleISO 8041-1:2017 Table 1 Wf reference frequency, Hz0.3979 Hz0.3979 Hz±0.01%-0.0000126 Hz32 %
CumpleISO 8041-1:2017 Table 1 Wf weighted indication at the reference, m/s20.03888 m/s²0.03888 m/s²±0.1%0.00000478 m/s²12 %
CumpleISO 8041-1:2017 Table 5 Upper magnitude tolerance in the central region, %12 %12 %±0.0005 %0 %0.0 %
CumpleISO 8041-1:2017 Table 5 Lower magnitude tolerance in the central region, %-11 %-11 %±0.0005 %0 %0.0 %
CumpleISO 8041-1:2017 Table 5 Upper magnitude tolerance in the skirts, %26 %26 %±0.0005 %0 %0.0 %
CumpleISO 8041-1:2017 Table 5 Lower magnitude tolerance in the skirts, %-21 %-21 %±0.0005 %0 %0.0 %
CumpleISO 8041-1:2017 Table 5 Lower magnitude tolerance in the tails, %-100 %-100 %±0.0005 %0 %0.0 %
CumpleISO 8041-1:2017 Table 5 Characteristic phase deviation in the central region, degrees6 deg6 deg±0.0005 deg0 deg0.0 %
CumpleISO 8041-1:2017 Table 2 Indication tolerance at the reference frequency, %4 %4 %±0.0005 %0 %0.0 %
CumpleISO 8041-1:2017 Table 2 Indication tolerance for low-frequency whole-body vibration, %5 %5 %±0.0005 %0 %0.0 %
CumpleISO 8041-1:2017 13.1 and 14.1 Decision rule at the upper tolerance limit, 2 verdicts11.5 % conforms bare, and not with U = 1 % against +12 %2/2 verdicts±000.0 %
CumpleISO 8041-1:2017 13.1 and 14.1 Decision rule at the lower tolerance limit, 2 verdicts-10.5 % conforms bare, and not with U = 1 % against -11 %2/2 verdicts±000.0 %
CumpleISO 8041-1:2017 13.1 and 14.1 Coverage factor of the expanded uncertainty22±0.000500.0 %
CumpleISO 8041-1:2017 12.11 and 12.13 Maximum permitted expanded uncertainties of measurement, %12.11.2 = 4.5 %; 12.11.3 = 3 %; 12.11.4 = 5 %; 12.13 = 3 %12.11.2 = 4.5 %; 12.11.3 = 3 %; 12.11.4 = 5 %; 12.13 = 3 %±0 %0 %0.0 %
CumpleISO 8041-1:2017 Table 1 Nominal frequency range, 9 weightings18 printed range bounds, 9 weightings18/18 printed range bounds±000.0 %
CumpleISO 8041-1:2017 Table 1 Nominal frequency range of the three applications, HzWh lower = 8 Hz; Wh upper = 1000 Hz; Wm lower = 1 Hz; Wf upper = 0.5 HzWh lower = 8 Hz; Wh upper = 1000 Hz; Wm lower = 1 Hz; Wf upper = 0.5 Hz±0 Hz0 Hz0.0 %
CumpleISO 8041-1:2017 Formula (H.4) Peak-value deviation at 12 degrees of characteristic phase deviation, %10 %9.9798 %±0.05 %-0.0202 %40 %
CumpleISO 8041-1:2017 Annex B Wh design-goal phase at 158.5 Hz, degrees-93.75 deg-93.7544 deg±0.05 deg-0.0044 deg8.8 %
CumpleISO 8041-1:2017 Annex B Wb design-goal phase at 1 Hz, degrees42.42 deg42.4193 deg±0.05 deg-0.0007 deg1.4 %
CumpleISO 8041-1:2017 Annex B Wk design-goal phase at 15.85 Hz, degrees-61.84 deg-61.8405 deg±0.05 deg-0.0005 deg1.0 %
CumpleISO 8041-1:2017 Annex B Wf design-goal phase at 0.3981 Hz, degrees-162.1 deg-162.1181 deg±0.05 deg-0.0181 deg36 %
CumpleISO 8041-1:2017 Annex B Design-goal phase columns of Tables B.1 to B.9, 318 cells318 printed phase cells, 9 weightings318/318 printed phase cells±000.0 %
CumpleISO 8041-1:2017 Table 5 Printed phase columns judged by Formula (6), 9 weightings9 printed phase columns inside Table 59/9 weightings±000.0 %
CumpleISO 8041-1:2017 H.2.3.4 n) Characteristic phase deviation of a constant group delay, degrees0 deg for any constant delay0 deg±0.000000001 deg0 deg0.0 %
Seat vibration transmission (ISO 10326-1) 7/7
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleISO 10326-1:2016 Formula (2) SEAT factor of one test0.70760.7076±0.000500.0 %
CumpleISO 10326-1:2016 Clause 10.2.1 Mean of three agreeing runs at the platform, m/s21.0033 m/s²1.0033 m/s²±0.0005 m/s²0 m/s²0.0 %
CumpleISO 10326-1:2016 Clause 10.2.1 Agreement three consecutive runs must keep, %5 %5 %±0.0005 %0 %0.0 %
CumpleISO 10326-1:2016 Formula (4) Corrected magnitude on the seat, m/s20.7784 m/s²0.7784 m/s²±0.0005 m/s²0 m/s²0.0 %
CumpleISO 10326-1:2016 Formula (5) Transmissibility at resonance of the damping test22±0.000500.0 %
CumpleISO 10326-1:2016 Clause 10.3 Inert mass the seat carries for the damping test, kg75 kg75 kg±0.0005 kg0 kg0.0 %
CumpleISO 10326-1:2016 Clause 9.5.1 Reduced test mass for an actively damped suspension, kg60 kg60 kg±0.0005 kg0 kg0.0 %
Saw-tooth signal burst (ISO 8041-1 5.9) 17/17
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleISO 8041-1:2017 Table 7 Signal-burst response, hand-arm: every printed cell12 cells inside the printed tolerance12/12 printed cells±000.0 %
CumpleISO 8041-1:2017 Table 8 Signal-burst response, whole-body: every printed cell192 cells inside the printed tolerance192/192 printed cells±000.0 %
CumpleISO 8041-1:2017 Table 9 Signal-burst response, low-frequency-whole-body: every printed cell24 cells inside the printed tolerance24/24 printed cells±000.0 %
CumpleISO 8041-1:2017 Table 7 band-limiting, 1 cycle, r.m.s. value, m/s20.0448 m/s²0.04476 m/s²±0.5%-0.00004 m/s²18 %
CumpleISO 8041-1:2017 Table 7 band-limiting, continuous, r.m.s. value, m/s20.565 m/s²0.5649 m/s²±0.5%-0.0001 m/s²3.5 %
CumpleISO 8041-1:2017 Table 7 Wh, 16 cycles, r.m.s. value, m/s20.0309 m/s²0.03084 m/s²±0.5%-0.00006 m/s²39 %
CumpleISO 8041-1:2017 Table 8 band-limiting, continuous, r.m.s. value, m/s20.546 m/s²0.54547 m/s²±0.5%-0.00053 m/s²19 %
CumpleISO 8041-1:2017 Table 8 Wb, 4 cycles, r.m.s. value, m/s20.0614 m/s²0.06139 m/s²±0.5%-0.00001 m/s²3.3 %
CumpleISO 8041-1:2017 Table 8 Wk, 1 cycle, VDV, m/s^1.750.323 m/s^1.750.32306 m/s^1.75±0.5%0.00006 m/s^1.753.7 %
CumpleISO 8041-1:2017 Table 8 Wk, 16 cycles, MTVV exponential, m/s20.289 m/s²0.28888 m/s²±0.5%-0.00012 m/s²8.3 %
CumpleISO 8041-1:2017 Table 8 Wk, continuous, MTVV linear, m/s20.364 m/s²0.36405 m/s²±0.5%0.00005 m/s²2.7 %
CumpleISO 8041-1:2017 Table 9 band-limiting, continuous, MSDV, m/s^1.521.51 m/s^1.521.40289 m/s^1.5±1%-0.10711 m/s^1.550 %
CumpleISO 8041-1:2017 Table 9 Wf, 1 cycle, r.m.s. value, m/s20.0197 m/s²0.01969 m/s²±0.5%-0.00001 m/s²10 %
CumpleISO 8041-1:2017 Table 6 Saw-tooth frequency of the whole-body burst, Hz15.915 Hz15.9155 Hz±0.01%0.0005 Hz31 %
CumpleISO 8041-1:2017 Table 6 Saw-tooth frequency of the hand-arm burst, Hz79.58 Hz79.5775 Hz±0.01%-0.0025 Hz31 %
CumpleISO 8041-1:2017 Table 6 Saw-tooth frequency of the low-frequency whole-body burst, Hz0.3979 Hz0.3979 Hz±0.01%-0.0000126 Hz32 %
CumpleISO 8041-1:2017 12.13 Largest fall time of the whole-body saw-tooth generator, s0.002 s0.002 s±0.000001 s0 s0.0 %
Personal vibration exposure meters (ISO 8041-2) 11/11
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleISO 8041-2:2021 Table 7 corroborado por ISO 8041-1:2017 Table 7 Signal-burst response, hand-arm: every printed cell12 cells inside the printed tolerance12/12 printed cells±000.0 %
CumpleISO 8041-2:2021 Table 8 corroborado por ISO 8041-1:2017 Table 8 Signal-burst response, whole-body: every printed cell192 cells inside the printed tolerance192/192 printed cells±000.0 %
CumpleISO 8041-2:2021 Table 9 corroborado por ISO 8041-1:2017 Table 9 Signal-burst response, low-frequency-whole-body: every printed cell24 cells inside the printed tolerance24/24 printed cells±000.0 %
CumpleISO 8041-2:2021 Table 7 comparado con ISO 8041-1:2017 Table 7 Printed cells identical to Part 1, hand-arm12 cells, indication and tolerance, as ISO 8041-1 prints them12/12 cells±000.0 %
CumpleISO 8041-2:2021 Table 8 comparado con ISO 8041-1:2017 Table 8 Printed cells identical to Part 1, whole-body192 cells, indication and tolerance, as ISO 8041-1 prints them192/192 cells±000.0 %
CumpleISO 8041-2:2021 Table 9 comparado con ISO 8041-1:2017 Table 9 Printed cells identical to Part 1, low-frequency-whole-body24 cells, indication and tolerance, as ISO 8041-1 prints them24/24 cells±000.0 %
CumpleISO 8041-2:2021 Table 6 comparado con ISO 8041-1:2017 Table 6 Saw-tooth test signal identical to Part 1, 18 fields18/18 fields18/18 fields±000.0 %
CumpleISO 8041-2:2021 Table 2 Tolerances of indication of a PVEM, 2 rows, %indication = 4 %; low-frequency indication = 5 %; weighting consistency = 3 %indication = 4 %; low-frequency indication = 5 %; weighting consistency = 3 %±0 %0 %0.0 %
CumpleISO 8041-2:2021 12.11 Maximum expanded uncertainties of the frequency-response tests, %12.11.2 = 4.5 %; 12.11.3 = 3 %; 12.11.4 = 5 %12.11.2 = 4.5 %; 12.11.3 = 3 %; 12.11.4 = 5 %±0 %0 %0.0 %
CumpleISO 8041-2:2021 Clauses 12 and 13 Maximum expanded uncertainties of measurement, 11 figures over 10 clauses, %12.7 = 2 %; 12.10.1 = 2 %; 12.10.2 = 3 %; 12.10.2 additional ranges = 4 %; 12.11.2 = 4.5 %; 12.11.3 = 3 %; 12.11.4 = 5 %; 12.13 = 3 %; 12.14 = 2 %; 12.18 = 0.01 %; 13.9 = 5 %12.7 = 2 %; 12.10.1 = 2 %; 12.10.2 = 3 %; 12.10.2 additional ranges = 4 %; 12.11.2 = 4.5 %; 12.11.3 = 3 %; 12.11.4 = 5 %; 12.13 = 3 %; 12.14 = 2 %; 12.18 = 0.01 %; 13.9 = 5 %±0 %0 %0.0 %
CumpleISO 8041-2:2021 12.1 and 13.1 Coverage factor of the expanded uncertainty22±000.0 %
Machine vibration evaluation (ISO 20816) 64/64
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleISO 20816-1:2016 Annex D.2 Vector change between two steady states, mm/s5.2 mm/s5.171 mm/s±0.05 mm/s-0.029 mm/s58 %
CumpleISO 20816-1:2016 Annex D.2 Change a magnitude comparison would report, mm/s-0.5 mm/s-0.5 mm/s±0.05 mm/s0 mm/s0.0 %
CumpleISO 20816-1:2016 Annex C.2 Zone A limit factor Zbound of Formula (C.1)11±0.00500.0 %
CumpleISO 20816-1:2016 Annex C.2 Zone B limit factor Zbound of Formula (C.1)2.562.56±0.00500.0 %
CumpleISO 20816-1:2016 Annex C.2 Zone C limit factor Zbound of Formula (C.1)6.46.4±0.00500.0 %
CumpleISO 20816-1:2016 Table C.1 Typical zone A/B boundary, low end of the range, mm/s0.71 mm/s0.71 mm/s±0.0005 mm/s0 mm/s0.0 %
CumpleISO 20816-1:2016 Table C.1 Typical zone A/B boundary, high end of the range, mm/s4.5 mm/s4.5 mm/s±0.0005 mm/s0 mm/s0.0 %
CumpleISO 20816-1:2016 Table C.1 Typical zone B/C boundary, low end of the range, mm/s1.8 mm/s1.8 mm/s±0.0005 mm/s0 mm/s0.0 %
CumpleISO 20816-1:2016 Table C.1 Typical zone B/C boundary, high end of the range, mm/s9.3 mm/s9.3 mm/s±0.0005 mm/s0 mm/s0.0 %
CumpleISO 20816-1:2016 Table C.1 Typical zone C/D boundary, low end of the range, mm/s4.5 mm/s4.5 mm/s±0.0005 mm/s0 mm/s0.0 %
CumpleISO 20816-1:2016 Table C.1 Typical zone C/D boundary, high end of the range, mm/s14.7 mm/s14.7 mm/s±0.0005 mm/s0 mm/s0.0 %
CumpleISO 20816-1:2016 Table C.1 Every range end is a rung of the printed ladder00±0.500.0 %
CumpleISO 20816-1:2016 Figure 9 Criterion is flat between the corner frequencies, worst deviation, mm/s0 mm/s0 mm/s±0.000000001 mm/s0 mm/s0.0 %
CumpleISO 20816-1:2016 Figure 9 Constant-displacement slope below the lower corner, dB per octave6.0206 dB6.0206 dB±0.001 dB-8.67e-8 dB0.0 %
CumpleISO 20816-1:2016 Figure 9 Constant-acceleration slope above the upper corner, dB per octave6.0206 dB6.0206 dB±0.001 dB-8.67e-8 dB0.0 %
CumpleISO 10816-3:2009 Table A.1 Zone boundaries, group 1 on rigid supports, displacement, worst deviation0 µm0 µm±0.0005 µm0 µm0.0 %
CumpleISO 10816-3:2009 Table A.1 Zone boundaries, group 1 on rigid supports, velocity, worst deviation0 mm/s0 mm/s±0.0005 mm/s0 mm/s0.0 %
CumpleISO 10816-3:2009 Table A.1 Zone boundaries, group 1 on flexible supports, displacement, worst deviation0 µm0 µm±0.0005 µm0 µm0.0 %
CumpleISO 10816-3:2009 Table A.1 Zone boundaries, group 1 on flexible supports, velocity, worst deviation0 mm/s0 mm/s±0.0005 mm/s0 mm/s0.0 %
CumpleISO 10816-3:2009 Table A.2 Zone boundaries, group 2 on rigid supports, displacement, worst deviation0 µm0 µm±0.0005 µm0 µm0.0 %
CumpleISO 10816-3:2009 Table A.2 Zone boundaries, group 2 on rigid supports, velocity, worst deviation0 mm/s0 mm/s±0.0005 mm/s0 mm/s0.0 %
CumpleISO 10816-3:2009 Table A.2 Zone boundaries, group 2 on flexible supports, displacement, worst deviation0 µm0 µm±0.0005 µm0 µm0.0 %
CumpleISO 10816-3:2009 Table A.2 Zone boundaries, group 2 on flexible supports, velocity, worst deviation0 mm/s0 mm/s±0.0005 mm/s0 mm/s0.0 %
CumpleISO 10816-3:2009 5.2.3 The more restrictive of the two quantities decides the zone33±0.500.0 %
CumpleISO 10816-3:2009 5.4.1 ALARM above a baseline, as a fraction of the zone B/C boundary0.250.25±0.000500.0 %
CumpleISO 10816-3:2009 5.4.1 ALARM ceiling, as a multiple of the zone B/C boundary1.251.25±0.000500.0 %
CumpleISO 10816-3:2009 5.4.2 TRIP ceiling, as a multiple of the zone C/D boundary1.251.25±0.000500.0 %
CumpleISO 10816-3:2009 5.3 Threshold of a significant change, as a fraction of the zone B/C boundary0.250.25±0.000500.0 %
CumpleISO 20816-9:2020 Table 2 Gear-unit displacement zone boundaries at a rating of 31.5, worst deviation0 µm0 µm±0.0005 µm0 µm0.0 %
CumpleISO 20816-9:2020 Table 2 Gear-unit displacement zone boundaries at a rating of 50, worst deviation0 µm0 µm±0.0005 µm0 µm0.0 %
CumpleISO 20816-9:2020 Table 2 Gear-unit displacement zone boundaries at a rating of 80, worst deviation0 µm0 µm±0.0005 µm0 µm0.0 %
CumpleISO 20816-9:2020 Table 2 Gear-unit displacement zone boundaries at a rating of 125, worst deviation0 µm0 µm±0.0005 µm0 µm0.0 %
CumpleISO 20816-9:2020 Table 2 Gear-unit displacement zone boundaries at a rating of 200, worst deviation0 µm0 µm±0.0005 µm0 µm0.0 %
CumpleISO 20816-9:2020 Table 3 Gear-unit velocity zone boundaries at a rating of 3.15, worst deviation0 mm/s0 mm/s±0.0005 mm/s0 mm/s0.0 %
CumpleISO 20816-9:2020 Table 3 Gear-unit velocity zone boundaries at a rating of 5, worst deviation0 mm/s0 mm/s±0.0005 mm/s0 mm/s0.0 %
CumpleISO 20816-9:2020 Table 3 Gear-unit velocity zone boundaries at a rating of 8, worst deviation0 mm/s0 mm/s±0.0005 mm/s0 mm/s0.0 %
CumpleISO 20816-9:2020 Table 3 Gear-unit velocity zone boundaries at a rating of 12.5, worst deviation0 mm/s0 mm/s±0.0005 mm/s0 mm/s0.0 %
CumpleISO 20816-9:2020 Table 3 Gear-unit velocity zone boundaries at a rating of 20, worst deviation0 mm/s0 mm/s±0.0005 mm/s0 mm/s0.0 %
CumpleISO 20816-9:2020 Table 4 Gear-unit acceleration zone boundaries at a rating of 5, worst deviation0 m/s²0 m/s²±0.0005 m/s²0 m/s²0.0 %
CumpleISO 20816-9:2020 Table 4 Gear-unit acceleration zone boundaries at a rating of 8, worst deviation0 m/s²0 m/s²±0.0005 m/s²0 m/s²0.0 %
CumpleISO 20816-9:2020 Table 4 Gear-unit acceleration zone boundaries at a rating of 12.5, worst deviation0 m/s²0 m/s²±0.0005 m/s²0 m/s²0.0 %
CumpleISO 20816-9:2020 Table 4 Gear-unit acceleration zone boundaries at a rating of 20, worst deviation0 m/s²0 m/s²±0.0005 m/s²0 m/s²0.0 %
CumpleISO 20816-9:2020 Table 4 Gear-unit acceleration zone boundaries at a rating of 31.5, worst deviation0 m/s²0 m/s²±0.0005 m/s²0 m/s²0.0 %
CumpleISO 20816-9:2020 Table 4 Gear-unit acceleration zone boundaries at a rating of 50, worst deviation0 m/s²0 m/s²±0.0005 m/s²0 m/s²0.0 %
CumpleISO 20816-9:2020 Table 4 Gear-unit acceleration zone boundaries at a rating of 80, worst deviation0 m/s²0 m/s²±0.0005 m/s²0 m/s²0.0 %
CumpleISO 20816-9:2020 Table 4 Gear-unit acceleration zone boundaries at a rating of 125, worst deviation0 m/s²0 m/s²±0.0005 m/s²0 m/s²0.0 %
CumpleISO 20816-9:2020 Table 4 Gear-unit acceleration zone boundaries at a rating of 200, worst deviation0 m/s²0 m/s²±0.0005 m/s²0 m/s²0.0 %
CumpleISO 20816-9:2020 Table 5 Gear-unit ratings for class I, subclass a, worst deviation00±0.000500.0 %
CumpleISO 20816-9:2020 Table 5 Gear-unit ratings for class I, subclass b, low power, worst deviation00±0.000500.0 %
CumpleISO 20816-9:2020 Table 5 Gear-unit ratings for class I, subclass b, high power, worst deviation00±0.000500.0 %
CumpleISO 20816-9:2020 Table 5 Gear-unit ratings for class II, subclass a, worst deviation00±0.000500.0 %
CumpleISO 20816-9:2020 Table 5 Gear-unit ratings for class II, subclass b, low power, worst deviation00±0.000500.0 %
CumpleISO 20816-9:2020 Table 5 Gear-unit ratings for class II, subclass b, high power, worst deviation00±0.000500.0 %
CumpleISO 20816-9:2020 Table 5 Gear-unit ratings for class III, subclass a, worst deviation00±0.000500.0 %
CumpleISO 20816-9:2020 Table 5 Gear-unit ratings for class III, subclass b, low power, worst deviation00±0.000500.0 %
CumpleISO 20816-9:2020 Table 5 Gear-unit ratings for class III, subclass b, high power, worst deviation00±0.000500.0 %
CumpleISO 20816-9:2020 Table 5 Gear-unit ratings for class IV, subclass a, worst deviation00±0.000500.0 %
CumpleISO 20816-9:2020 Table 5 Gear-unit ratings for class IV, subclass b, low power, worst deviation00±0.000500.0 %
CumpleISO 20816-9:2020 Table 5 Gear-unit ratings for class IV, subclass b, high power, worst deviation00±0.000500.0 %
CumpleISO 20816-9:2020 Figure A.1 Fall of the displacement rating curve a decade above its corner, dB10 dB10 dB±0.0005 dB0 dB0.0 %
CumpleISO 20816-9:2020 Figure A.1 Displacement rating curve below its corner, worst deviation from DR, µm0 µm0 µm±0.0005 µm0 µm0.0 %
CumpleISO 20816-9:2020 Figure A.2 Fall of the velocity rating curve a decade outside each corner, dB14 dB14 dB±0.0005 dB0 dB0.0 %
CumpleISO 20816-9:2020 Figure A.2 Velocity rating curve between its corners, worst deviation from VR, mm/s0 mm/s0 mm/s±0.0005 mm/s0 mm/s0.0 %
CumpleISO 20816-9:2020 Table 4, note Velocity rungs carried onto acceleration rungs at 280 Hz, worst error, %0 %2.034 %±3 %2.034 %68 %
Vibration effects on structures (DIN 4150-3) 27/27
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleDIN 4150-3:1999-02 Table 1 Short-term guideline vi at the foundation, commercial and industrial buildings, 1 Hz20 mm/s20 mm/s±0.005 mm/s0 mm/s0.0 %
CumpleDIN 4150-3:1999-02 Table 1 Short-term guideline vi at the foundation, commercial and industrial buildings, 10 Hz20 mm/s20 mm/s±0.005 mm/s0 mm/s0.0 %
CumpleDIN 4150-3:1999-02 Table 1 Short-term guideline vi at the foundation, commercial and industrial buildings, 50 Hz40 mm/s40 mm/s±0.005 mm/s0 mm/s0.0 %
CumpleDIN 4150-3:1999-02 Table 1 Short-term guideline vi at the foundation, commercial and industrial buildings, 100 Hz50 mm/s50 mm/s±0.005 mm/s0 mm/s0.0 %
CumpleDIN 4150-3:1999-02 Table 1 Short-term guideline vi at the foundation, dwellings, 1 Hz5 mm/s5 mm/s±0.005 mm/s0 mm/s0.0 %
CumpleDIN 4150-3:1999-02 Table 1 Short-term guideline vi at the foundation, dwellings, 10 Hz5 mm/s5 mm/s±0.005 mm/s0 mm/s0.0 %
CumpleDIN 4150-3:1999-02 Table 1 Short-term guideline vi at the foundation, dwellings, 50 Hz15 mm/s15 mm/s±0.005 mm/s0 mm/s0.0 %
CumpleDIN 4150-3:1999-02 Table 1 Short-term guideline vi at the foundation, dwellings, 100 Hz20 mm/s20 mm/s±0.005 mm/s0 mm/s0.0 %
CumpleDIN 4150-3:1999-02 Table 1 Short-term guideline vi at the foundation, especially sensitive buildings, 1 Hz3 mm/s3 mm/s±0.005 mm/s0 mm/s0.0 %
CumpleDIN 4150-3:1999-02 Table 1 Short-term guideline vi at the foundation, especially sensitive buildings, 10 Hz3 mm/s3 mm/s±0.005 mm/s0 mm/s0.0 %
CumpleDIN 4150-3:1999-02 Table 1 Short-term guideline vi at the foundation, especially sensitive buildings, 50 Hz8 mm/s8 mm/s±0.005 mm/s0 mm/s0.0 %
CumpleDIN 4150-3:1999-02 Table 1 Short-term guideline vi at the foundation, especially sensitive buildings, 100 Hz10 mm/s10 mm/s±0.005 mm/s0 mm/s0.0 %
CumpleDIN 4150-3:1999-02 Table 1 Short-term guideline vi in the topmost floor plane, commercial and industrial buildings40 mm/s40 mm/s±0.005 mm/s0 mm/s0.0 %
CumpleDIN 4150-3:1999-02 Table 1 Short-term guideline vi in the topmost floor plane, dwellings15 mm/s15 mm/s±0.005 mm/s0 mm/s0.0 %
CumpleDIN 4150-3:1999-02 Table 1 Short-term guideline vi in the topmost floor plane, especially sensitive buildings8 mm/s8 mm/s±0.005 mm/s0 mm/s0.0 %
CumpleDIN 4150-3:1999-02 Table 3 Long-term guideline vi in the topmost floor plane, commercial and industrial buildings10 mm/s10 mm/s±0.005 mm/s0 mm/s0.0 %
CumpleDIN 4150-3:1999-02 Table 3 Long-term guideline vi in the topmost floor plane, dwellings5 mm/s5 mm/s±0.005 mm/s0 mm/s0.0 %
CumpleDIN 4150-3:1999-02 Table 3 Long-term guideline vi in the topmost floor plane, especially sensitive buildings2.5 mm/s2.5 mm/s±0.005 mm/s0 mm/s0.0 %
CumpleDIN 4150-3:1999-02 Table 2 Short-term guideline vi on a buried pipeline, welded steel100 mm/s100 mm/s±0.005 mm/s0 mm/s0.0 %
CumpleDIN 4150-3:1999-02 Table 2 Short-term guideline vi on a buried pipeline, concrete and flanged metal80 mm/s80 mm/s±0.005 mm/s0 mm/s0.0 %
CumpleDIN 4150-3:1999-02 Table 2 Short-term guideline vi on a buried pipeline, masonry and plastic50 mm/s50 mm/s±0.005 mm/s0 mm/s0.0 %
CumpleDIN 4150-3:1999-02 Clause 6.3 Long-term reduction of the pipeline guideline values0.50.5±0.000500.0 %
CumpleDIN 4150-3:1999-02 Clause 5.1 Massive engineering structures, factor on the row 1 values22±0.000500.0 %
CumpleDIN 4150-3:1999-02 Clause 5.2 Vertical guideline vz for a ceiling or floor, mm/s20 mm/s20 mm/s±0.005 mm/s0 mm/s0.0 %
CumpleDIN 4150-3:1999-02 Bild 1 Guideline vi inside a band, dwellings, 30 Hz10 mm/s10 mm/s±0.005 mm/s0 mm/s0.0 %
CumpleDIN 4150-3:1999-02 Bild 1 Guideline vi inside a band, commercial and industrial buildings, 75 Hz45 mm/s45 mm/s±0.005 mm/s0 mm/s0.0 %
CumpleDIN 4150-3:1999-02 Clause 6.4 Lowest horizontal natural frequency of a ten-storey building, Hz1 Hz1 Hz±0.0005 Hz0 Hz0.0 %
Building response prediction (ISO 4866) 15/15
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleISO 4866:2010 D.2 Fundamental frequency of a 23 m building, f = 46/h, Hz2 Hz2 Hz±0.0005 Hz0 Hz0.0 %
CumpleISO 4866:2010 D.2 Fundamental frequency of a 46 m building, f = 46/h, Hz1 Hz1 Hz±0.0005 Hz0 Hz0.0 %
CumpleISO 4866:2010 D.2 Fundamental frequency of a 92 m building, f = 46/h, Hz0.5 Hz0.5 Hz±0.0005 Hz0 Hz0.0 %
CumpleISO 4866:2010 D.2 The same fit as a period, T = 0.022 h, s1.1 s1.1 s±0.0005 s0 s0.0 %
CumpleISO 4866:2010 D.2 Fundamental frequency of a ten-storey building, f = 10/n, Hz1 Hz1 Hz±0.0005 Hz0 Hz0.0 %
CumpleISO 4866:2010 Formula (D.1) Fundamental period from the height form at k = 0.014, s0.7 s0.7 s±0.0005 s0 s0.0 %
CumpleISO 4866:2010 Formula (D.1) Fundamental period from the height form at k = 0.03, s1.5 s1.5 s±0.0005 s0 s0.0 %
CumpleISO 4866:2010 Formula (D.2) Fundamental period from the height_width form at k = 0.087, s1.1673 s1.1672 s±0.0005 s-0.0001 s20 %
CumpleISO 4866:2010 Formula (D.2) Fundamental period from the height_width form at k = 0.109, s1.4625 s1.4624 s±0.0005 s-0.0001 s20 %
CumpleISO 4866:2010 Formula (D.3) Fundamental period from the slenderness form at k = 0.06, s0.6971 s0.6971 s±0.0005 s0.0000370 s7.4 %
CumpleISO 4866:2010 Formula (D.3) Fundamental period from the slenderness form at k = 0.08, s0.9295 s0.9295 s±0.0005 s0.0000160 s3.2 %
CumpleISO 4866:2010 D.2 Upper end of the error band an empirical prediction carries, Hz3 Hz3 Hz±0.0005 Hz0 Hz0.0 %
CumpleISO 4866:2010 D.2 Lower end of the error band an empirical prediction carries, Hz1 Hz1 Hz±0.0005 Hz0 Hz0.0 %
CumpleISO 4866:2010 D.4 Lowest damping ratio measured on a building, % of critical0.5 %0.5 %±0.0005 %0 %0.0 %
CumpleISO 4866:2010 D.4 Highest damping ratio measured on a building, % of critical2.1 %2.1 %±0.0005 %0 %0.0 %
Vibration immission measurement (DIN 45669) 35/35
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleDIN 45669-1:2010-09 5.2.3.2 Band limitation at the lower corner 0.8 f_u, magnitude0.707110.70711±0.00005-1.45e-90.0 %
CumpleDIN 45669-1:2010-09 5.2.3.2 Band limitation at the upper corner f_o / 0.8, magnitude0.707110.70711±0.00005-1.45e-90.0 %
CumpleDIN 45669-1:2010-09 5.2.3.2 KB weighting at its own corner 5.6 Hz, relative to the band limitation0.707110.70711±0.0000500.0 %
CumpleDIN 45669-1:2010-09 Table 2 Lower limit of F(f) inside the band, %10 %10 %±1.00e-9 %0 %0.0 %
CumpleDIN 45669-1:2010-09 Table 2 Lower limit of F(f) in the skirt, %20 %20 %±1.00e-9 %0 %0.0 %
CumpleDIN 45669-1:2010-09 Table 3 Upper limit of F(f) outside the band, %20 %20 %±1.00e-9 %0 %0.0 %
CumpleDIN 45669-1:2010-09 Table 9 KB_F of a 1 mm/s sine at 1 Hz0.1030.1027±0.001-0.000330 %
CumpleDIN 45669-1:2010-09 Table 9 KB_Fmax of a 1 mm/s sine at 1 Hz0.130.1298±0.001-0.000220 %
CumpleDIN 45669-1:2010-09 Table 9 KB_F of a 1 mm/s sine at 5.6 Hz0.50.4994±0.001-0.000660 %
CumpleDIN 45669-1:2010-09 Table 9 KB_Fmax of a 1 mm/s sine at 5.6 Hz0.5280.5274±0.001-0.000660 %
CumpleDIN 45669-1:2010-09 Table 9 KB_F of a 1 mm/s sine at 31.5 Hz0.6930.6928±0.001-0.000220 %
CumpleDIN 45669-1:2010-09 Table 9 KB_Fmax of a 1 mm/s sine at 31.5 Hz0.70.6998±0.001-0.000220 %
CumpleDIN 45669-1:2010-09 Table 9 KB_F of a 1 mm/s sine at 80 Hz0.5940.5941±0.0010.000110 %
CumpleDIN 45669-1:2010-09 Table 9 KB_Fmax of a 1 mm/s sine at 80 Hz0.5970.5965±0.001-0.000550 %
CumpleDIN 45669-1:2010-09 Table 9 KB_F of a 1 mm/s sine at 315 Hz0.0710.0708±0.001-0.000220 %
CumpleDIN 45669-1:2010-09 Table 9 KB_Fmax of a 1 mm/s sine at 315 Hz0.0710.0709±0.001-0.000110 %
CumpleDIN 45669-1:2010-09 6.2.3.12 KB_F under the reference conditions (1 mm/s, 16 Hz)0.6670.6671±0.0010.000110 %
CumpleDIN 45669-1:2010-09 6.2.3.12 KB_Fmax under the reference conditions (1 mm/s, 16 Hz)0.680.6803±0.0010.000330 %
CumpleDIN 45669-1 Ber 1:2012-12 Table 8 KB_Fmax of an 80 Hz burst train, continuous, % of continuous100.4 %100.397 %±0.7 %-0.003 %0.4 %
CumpleDIN 45669-1 Ber 1:2012-12 Table 8 KB_Fmax of an 80 Hz burst train, 800 ms, % of continuous100.3 %100.335 %±0.7 %0.035 %5.0 %
CumpleDIN 45669-1 Ber 1:2012-12 Table 8 KB_Fmax of an 80 Hz burst train, 400 ms, % of continuous98.3 %98.337 %±0.7 %0.037 %5.3 %
CumpleDIN 45669-1 Ber 1:2012-12 Table 8 KB_Fmax of an 80 Hz burst train, 200 ms, % of continuous89.7 %89.648 %±0.7 %-0.052 %7.4 %
CumpleDIN 45669-1 Ber 1:2012-12 Table 8 KB_Fmax of an 80 Hz burst train, 100 ms, % of continuous74.5 %74.405 %±0.7 %-0.095 %14 %
CumpleDIN 45669-1 Ber 1:2012-12 Table 8 KB_Fmax of an 80 Hz burst train, 50 ms, % of continuous57.6 %57.59 %±0.7 %-0.01 %1.4 %
CumpleDIN 45669-1 Ber 1:2012-12 Table 8 KB_Fmax of an 80 Hz burst train, 25 ms, % of continuous42.7 %42.886 %±0.7 %0.186 %27 %
CumpleDIN 45669-1 Ber 1:2012-12 Table 8 KB_Fmax of an 80 Hz burst train, 12.5 ms, % of continuous30.9 %31.427 %±0.7 %0.527 %75 %
CumpleDIN 45669-1:2010-09 Annex E, Table E.1 Assessment weighting H_vB, commercial, at 50 Hz0.50.5±0.0000500.0 %
CumpleDIN 45669-1:2010-09 Annex E, Table E.1 Assessment weighting H_vB, commercial, at 100 Hz0.40.4±0.0000500.0 %
CumpleDIN 45669-1:2010-09 Annex E, Table E.1 Assessment weighting H_vB, residential, at 50 Hz0.333330.33333±0.0000500.0 %
CumpleDIN 45669-1:2010-09 Annex E, Table E.1 Assessment weighting H_vB, residential, at 100 Hz0.250.25±0.0000500.0 %
CumpleDIN 45669-1:2010-09 Annex E, Table E.1 Assessment weighting H_vB, sensitive, at 50 Hz0.3750.375±0.0000500.0 %
CumpleDIN 45669-1:2010-09 Annex E, Table E.1 Assessment weighting H_vB, sensitive, at 100 Hz0.30.3±0.0000500.0 %
CumpleDIN 45669-1:2010-09 Annex E, Table E.2 Guideline assessment velocity, commercial, mm/s20 mm/s20 mm/s±0.0005 mm/s0 mm/s0.0 %
CumpleDIN 45669-1:2010-09 Annex E, Table E.2 Guideline assessment velocity, residential, mm/s5 mm/s5 mm/s±0.0005 mm/s0 mm/s0.0 %
CumpleDIN 45669-1:2010-09 Annex E, Table E.2 Guideline assessment velocity, sensitive, mm/s3 mm/s3 mm/s±0.0005 mm/s0 mm/s0.0 %
Railway vibration evaluation (DIN 45672) 4/4
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleDIN 45672-2:1995-07 7.3.2 Block length at 1.25 Hz resolution, s0.8 s0.8 s±1.00e-12 s0 s0.0 %
CumpleDIN 45672-2:1995-07 7.1 Relative bandwidth of a third octave, %23 %23.0768 %±0.5 %0.0768 %15 %
CumpleDIN 45672-2:1995-07 Clause 4 Shortfall of the running mean square after 2 tau, %14 %13.53 %±0.5 %-0.466 %93 %
CumpleDIN 45672-2:1995-07 Clause 4 Shortfall of the running mean square after 4 tau, %2 %1.83 %±0.5 %-0.168 %34 %
Vibration and people in buildings (DIN 4150-2) 21/21
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleDIN 4150-2:1999-06 Annex C, Example 2 Admissible exposure at A_r, h1.48 h1.482 h±0.005 h0.002 h40 %
CumpleDIN 4150-2:1999-06 Annex C, Example 4 KB_FTr of two hammers, Formula (4a)0.150.154±0.0050.00480 %
CumpleDIN 4150-2:1999-06 Annex C, Example 5 KB_FTr with hammer b) in the rest hours, Formula (5)0.20.195±0.005-0.005100 %
CumpleDIN 4150-2:1999-06 Annex C, Example 6 KB_FTr of hammer a) over 16 h with 4 h in the rest hours0.180.179±0.005-0.00120 %
CumpleDIN 4150-2:1999-06 Annex C, Example 7 KB*_Fmax from 4 mm/s at 14 Hz, Formulae (6) and (7)2.12.101±0.050.0012.0 %
CumpleDIN 4150-2:1999-06 Annex C, Example 8 KB_FTm of class 1 by Formula (A.1)0.820.8198±0.005-0.00024.0 %
CumpleDIN 4150-2:1999-06 Annex C, Example 8 KB_FTm of class 2 by Formula (A.1)0.220.2209±0.0050.000918 %
CumpleDIN 4150-2:1999-06 Annex C, Example 8 s(KB²_FTm) of class 1 by Formula (A.2)0.270.2709±0.0050.000918 %
CumpleDIN 4150-2:1999-06 Annex C, Example 8 s(KB²_FTm) of class 2 by Formula (A.2)0.0120.0124±0.00050.000480 %
CumpleDIN 4150-2:1999-06 Annex C, Example 8 KB_FTr of both classes by Formula (A.3)0.3250.3251±0.00050.000120 %
CumpleDIN 4150-2:1999-06 Annex C, Example 8 KB_FTr one spread up, above the value0.0590.0591±0.00050.000120 %
CumpleDIN 4150-2:1999-06 Annex C, Example 8 KB_FTr one spread down, below the value0.0730.0725±0.0015-0.000533 %
CumpleDIN 4150-2:1999-06 Annex C, Example 8 KB_FTm over the 20 intervals of the record, Formula (3)0.3250.3251±0.00050.000120 %
CumpleDIN 4150-2:1999-06 Annex C, Example 8 KB_FTm over the record with the passage maxima alone0.3180.3175±0.0005-0.0005100 %
CumpleDIN 4150-2:1999-06 Figure 3 Stage I A_u interpolated for 2 working days0.730.73±0.00500.0 %
CumpleDIN 4150-2:1999-06 Figure 3 Stage I A_u interpolated for 3 working days0.670.67±0.00500.0 %
CumpleDIN 4150-2:1999-06 Figure 3 Stage I A_u interpolated for 4 working days0.60.6±0.00500.0 %
CumpleDIN 4150-2:1999-06 Figure 3 Stage I A_u interpolated for 5 working days0.530.53±0.00500.0 %
CumpleDIN 4150-2:1999-06 Figure 3 Stage I A_u interpolated for 6 working days0.470.47±0.00500.0 %
CumpleDIN 4150-2:1999-06 Annex D, Figure D.1 Trains an hour at KB_FTm = 0.2 for A_r = 0.0577±1.00e-900.0 %
CumpleDIN 4150-2:1999-06 Annex D, Figure D.1 Trains an hour at KB_FTm = 0.2 for A_r = 0.071414±1.00e-900.0 %
Predicting vibration before it is measured (DIN 4150-1) 12/12
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleDIN 4150-1:2001-06 Annex A, Figure A.19 alpha from D = 0.01 and lambda = 12.5 m, as printed, 1/m0.005 1/m0.005 1/m±0.0005 1/m0.0000265 1/m5.3 %
CumpleDIN 4150-1:2001-06 Annex A, Figure A.19 v at 80 m by Formula (2) with n = 0, as drawn, mm/s0.32 mm/s0.315 mm/s±0.01 mm/s-0.005 mm/s50 %
CumpleDIN 4150-1:2001-06 Annex A, Figure A.19 v at 80 m by Formula (2) with n = 0.5, as drawn, mm/s0.13 mm/s0.127 mm/s±0.01 mm/s-0.003 mm/s30 %
CumpleDIN 4150-1:2001-06 Annex A, Figure A.19 v at 80 m by Formula (2) with n = 1, as drawn, mm/s0.05 mm/s0.051 mm/s±0.01 mm/s0.001 mm/s10 %
CumpleDIN 4150-1:2001-06 Figure 2 Damping factor at 100 m and 10 Hz, as drawn0.730.73±0.020.0004032.0 %
CumpleDIN 4150-1:2001-06 Figure 2 Damping factor at 100 m and 20 Hz, as drawn0.530.533±0.020.00315 %
CumpleDIN 4150-1:2001-06 Figure 2 Damping factor at 100 m and 30 Hz, as drawn0.390.39±0.02-0.0003391.7 %
CumpleDIN 4150-1:2001-06 Figure 2 Damping factor at 100 m and 40 Hz, as drawn0.280.285±0.020.00525 %
CumpleDIN 4150-1:2001-06 Figure 2 Damping factor at 100 m and 50 Hz, as drawn0.210.208±0.02-0.00210 %
CumpleDIN 4150-1:2001-06 Annex A, Figure A.18 v_N for 20 machines by Formula (7) with chi of Figure 3, as drawn, mm/s0.78 mm/s0.754 mm/s±6%-0.026 mm/s56 %
CumpleDIN 4150-1:2001-06 Annex A, Figure A.18 v_N for 60 machines by Formula (7) with chi of Figure 3, as drawn, mm/s1.03 mm/s0.995 mm/s±6%-0.035 mm/s57 %
CumpleDIN 4150-1:2001-06 Annex A, Figure A.18 v_N for 100 machines by Formula (7) with chi of Figure 3, as drawn, mm/s1.27 mm/s1.258 mm/s±6%-0.012 mm/s16 %
Railway vibration predicted from third-octave spectra (E DIN 45672-3:2023-02) 21/21
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleE DIN 45672-3:2023-02 Annex C, Table C.1 Sum level of the 19 printed bands78.1 dB78.08 dB±0.05 dB-0.022 dB44 %
CumpleE DIN 45672-3:2023-02 Annex C, C.3 KB_FTm,Zug from 78.1 dB by Formula (9), c_T1 = 10.40.4018±0.050.00183.6 %
CumpleE DIN 45672-3:2023-02 Annex C, C.3 KB_Fmax,Zug by Formula (10), 1.5 times it0.60.6026±0.050.00265.2 %
CumpleE DIN 45672-3:2023-02 Annex C, C.3 v_max by Formula (12), 3 times that, mm/s1.81 mm/s1.808 mm/s±0.005 mm/s-0.002 mm/s40 %
CumpleE DIN 45672-3:2023-02 Annex C, C.3 KB_FTr of the day by Formula (11), 200 trams at 0.7 (the print's 0.11 puts alpha under the root once, not squared)0.090.0904±0.00050.000480 %
CumpleE DIN 45672-3:2023-02 Annex C, C.3 KB_FTr of the night by Formula (11), 20 trams at 0.7 (the print's 0.05 puts alpha under the root once, not squared)0.040.0404±0.00050.000480 %
CumpleE DIN 45672-3:2023-02 Annex C, Table C.1 L_v at 4 Hz by Formula (1)28.9 dB28.8 dB±0.1 dB-0.1 dB100 %
CumpleE DIN 45672-3:2023-02 Annex C, Table C.1 L_v at 20 Hz by Formula (1)75.6 dB75.6 dB±0.1 dB0 dB0.0 %
CumpleE DIN 45672-3:2023-02 Annex C, Table C.1 L_v at 63 Hz by Formula (1)61.4 dB61.4 dB±0.1 dB0 dB0.0 %
CumpleE DIN 45672-3:2023-02 Annex C, Table C.1 L_v at 250 Hz by Formula (1)20.8 dB20.8 dB±0.1 dB0 dB0.0 %
CumpleE DIN 45672-3:2023-02 Table 2 KB weighting at 4 Hz-4.7 dB-4.7 dB±1.00e-9 dB0 dB0.0 %
CumpleE DIN 45672-3:2023-02 Table 2 KB weighting at 8 Hz-1.7 dB-1.7 dB±1.00e-9 dB0 dB0.0 %
CumpleE DIN 45672-3:2023-02 Table 2 KB weighting at 20 Hz-0.3 dB-0.3 dB±1.00e-9 dB0 dB0.0 %
CumpleE DIN 45672-3:2023-02 Table 2 KB weighting at 63 Hz0 dB0 dB±1.00e-9 dB0 dB0.0 %
CumpleE DIN 45672-3:2023-02 Annex A Table A.1, concrete floor at 8 Hz, the band at 8 Hz15 dB15 dB±1.00e-9 dB0 dB0.0 %
CumpleE DIN 45672-3:2023-02 Annex A Table A.1, concrete floor at 20 Hz, the band at 20 Hz13.12 dB13.12 dB±1.00e-9 dB0 dB0.0 %
CumpleE DIN 45672-3:2023-02 Annex A Table A.2, timber floor at 8 Hz, the band at 4 Hz5.14 dB5.14 dB±1.00e-9 dB0 dB0.0 %
CumpleE DIN 45672-3:2023-02 Annex A Table A.3, ground to a basement, the mean at 31.5 Hz-9.3 dB-9.3 dB±1.00e-9 dB0 dB0.0 %
CumpleE DIN 45672-3:2023-02 Annex A Table A.4, ground to a ground floor, the mean at 12.5 Hz-1.9 dB-1.9 dB±1.00e-9 dB0 dB0.0 %
CumpleE DIN 45672-3:2023-02 Annex A Table A.5, foundation to a concrete floor, the mean at its natural frequency17.26 dB17.26 dB±1.00e-9 dB0 dB0.0 %
CumpleE DIN 45672-3:2023-02 Annex A Table A.6, foundation to a timber floor, the mean at its natural frequency21.93 dB21.93 dB±1.00e-9 dB0 dB0.0 %
Railway vibration by category of train (E DIN 4150-2:2023-08) 20/20
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleE DIN 4150-2:2023-08 Annex B, Example 8 KB_FTr of the day by Formula (6), 144 metros at 1.0 and 80 trams at 0.7 a track (the print says 0.099 8, which its three-decimal r.m.s. give; its four-decimal inputs give 0.099 7)0.09970.0997±0.00010.000020842 %
CumpleE DIN 4150-2:2023-08 Table 1 Night A_u of a mixed area, the one cell that changes0.10.1±0.000050000.0 %
CumpleE DIN 4150-2:2023-08 Annex B, Table B.1 KB_FTm,Zug of the metro north by Formula (5)0.0370.0365±0.0005-0.0005100 %
CumpleE DIN 4150-2:2023-08 Annex B, Table B.1 KB_Fmax,Zug of the metro north by Formula (7)0.0550.0548±0.0005-0.000240 %
CumpleE DIN 4150-2:2023-08 Annex B, Table B.1 KB_FTm,Zug of the metro south by Formula (5)0.0470.0468±0.0005-0.000240 %
CumpleE DIN 4150-2:2023-08 Annex B, Table B.1 KB_Fmax,Zug of the metro south by Formula (7)0.070.0701±0.00050.000120 %
CumpleE DIN 4150-2:2023-08 Annex B, Table B.1 KB_FTm,Zug of the tram east by Formula (5)0.4060.4061±0.00050.000120 %
CumpleE DIN 4150-2:2023-08 Annex B, Table B.1 KB_Fmax,Zug of the tram east by Formula (7)0.6090.6091±0.00050.000120 %
CumpleE DIN 4150-2:2023-08 Annex B, Table B.1 KB_FTm,Zug of the tram west by Formula (5)0.5680.5676±0.0005-0.000480 %
CumpleE DIN 4150-2:2023-08 Annex B, Table B.1 KB_Fmax,Zug of the tram west by Formula (7)0.8510.8514±0.00050.000480 %
CumpleE DIN 4150-2:2023-08 Annex B, Example 9 KB_FTr of the nullfall by day, Formula (6) with N_r = 19200.0390.0386±0.0005-0.000480 %
CumpleE DIN 4150-2:2023-08 Annex B, Example 9 KB_FTr of the nullfall by night, Formula (6) with N_r = 960 (the print divides by 920 and gets 0.066)0.0650.0649±0.0005-0.000120 %
CumpleE DIN 4150-2:2023-08 Annex B, Example 9 KB_FTr of the planfall by day, Formula (6) with N_r = 19200.0460.046±0.00050.00003667.3 %
CumpleE DIN 4150-2:2023-08 Annex B, Example 9 KB_FTr of the planfall by night, Formula (6) with N_r = 960 (the print divides by 920 and gets 0.096)0.0940.0937±0.0005-0.000360 %
CumpleE DIN 4150-2:2023-08 Table 3 A_u of stage I for 3 working days, as printed0.670.67±0.00500.0 %
CumpleE DIN 4150-2:2023-08 Table 3 A_r of stage I for 3 working days, as printed0.370.37±0.00500.0 %
CumpleE DIN 4150-2:2023-08 Table 3 A_u of stage II for 5 working days, as printed0.930.93±0.00500.0 %
CumpleE DIN 4150-2:2023-08 Table 3 A_r of stage II for 5 working days, as printed0.670.67±0.00500.0 %
CumpleE DIN 4150-2:2023-08 Table 3 A_u of stage III for 6 working days, as printed1.271.27±0.00500.0 %
CumpleE DIN 4150-2:2023-08 Table 3 A_r of stage III for 6 working days, as printed1.031.03±0.00500.0 %
Speech intelligibility (ANSI S3.5-1997) 24/24
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleANSI S3.5:1997 Table 3 Band-importance function normalisation11±1.00e-900.0 %
CumpleASA WG S3-79 SII.C (clause 5.4) Equivalent masking spectrum level at 200 Hz-1.665-1.665±0.0010.00028328 %
CumpleANSI S3.5:1997 clause 5.6 Equivalent disturbance in quiet at 5000 Hz-23.6 dB-23.6 dB±0.01 dB0 dB0.0 %
CumpleASA WG S3-79 SII.C (clause 6) SII, noise 30 dB plus hearing loss 40 dB0.2184540.218454±0.000001-3.05e-110.0 %
CumpleANSI S3.5:1997 Annex C.2 Worked example (SII.C / R CRAN, errata applied)0.8513750.851375±0.000001-2.50e-110.0 %
CumpleANSI S3.5:1997 Table C.2 (errata) Masking Zi at 200 Hz, corrected worksheet34.66 dB34.66 dB±0.01 dB-0.002 dB40 %
CumpleASA WG S3-79 SII.C (clause 6) SII, standard speech in quiet, normal hearing0.995825170.99582517±0.00000100.0 %
CumpleASA WG S3-79 TO.TST Official one-third-octave test case0.4450.445±0.0010.00039178 %
CumpleASA WG S3-79 TO_1.TST Official test case, alternative importance0.4380.438±0.0010.00021844 %
CumpleASA WG S3-79 CB.TST Official critical-band test case0.2730.273±0.001-0.000064613 %
CumpleASA WG S3-79 CB_1.TST Critical band, alternative importance0.410.41±0.0010.00047495 %
CumpleASA WG S3-79 ECB.TST Official equally-contributing test case0.2780.278±0.0010.00013928 %
CumpleASA WG S3-79 ECB_1.TST Equally contributing, alternative importance0.410.41±0.0010.00047495 %
CumpleASA WG S3-79 OCTAVE.TST Official octave-band test case0.4910.491±0.001-0.00003757.5 %
CumpleASA WG S3-79 OCTAVE_1.TST Octave band, alternative importance0.3230.323±0.001-0.000062513 %
CumpleANSI S3.5:1997 Annex C.1 Octave-band worked example (SII.C)0.5040.504±0.0015.00e-110.0 %
CumpleANSI S3.5:1997 Table C.1 (errata) Level distortion Li, row i = 511±0.01-0.00480 %
CumpleANSI S3.5:1997 Table 1 Critical-band importance normalisation11±1.00e-900.0 %
CumpleANSI S3.5:1997 Table 2 Equally-contributing importance, 17 x 0.05880.99960.9996±1.00e-900.0 %
CumpleANSI S3.5:1997 Table 4 Octave-band importance normalisation11±1.00e-900.0 %
CumpleANSI S3.5:1997 Table 4 Octave-band Ui and Xi equal Table 3's0 dB0 dB±1.00e-9 dB0 dB0.0 %
CumpleANSI S3.5:1997 Table 1 Critical-band table, all 21 rows00±1.00e-900.0 %
CumpleASA WG S3-79 SII.C (clause 6) Flat-input cases, all four procedures00.0000000001±0.0000000010.000000000110.0 %
CumpleANSI S3.5:1997 Table 3 Loud-effort speech spectrum level at 1 kHz42.16 dB42.16 dB±1.00e-9 dB0 dB0.0 %
Objective intelligibility (STOI / ESTOI) 3/3
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleTaal et al.:2011 (Eq. 6, degenerate) STOI of a signal against itself = 1 (perfect correlation)11±0.00000100.0 %
CumpleJensen & Taal:2016 (Eq. 8, degenerate) ESTOI of a signal against itself = 1 (perfect spectral correlation)11±0.00000100.0 %
CumpleTaal et al.:2011 (monotonicity with SNR) STOI rises from -15 dB to +25 dB SNR speech-shaped noiseSTOI(+25 dB) - STOI(-15 dB) > 0.20.462 (0.389 -> 0.851)-0-
Impulsive-sound prominence (NT ACOU 112) 2/2
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleNT ACOU 112:2002 Formula 1 Predicted prominence, OR=1000 dB/s, LD=30 dB11.954211.9542±0.00010.000042543 %
CumpleNT ACOU 112:2002 Formula 2 Adjustment KI to LAeq at prominence P=109 dB9 dB±1.00e-9 dB0 dB0.0 %
Impulsive-sound prominence (ISO/PAS 1996-3) 2/2
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleISO/PAS 1996-3:2022 3.5 Onset rate of a 30 dB ramp over 0.30 s100 dB/s100 dB/s±0.00000100 dB/s0 dB/s0.0 %
CumpleISO/PAS 1996-3:2022 Formula 3 Adjustment KI of the ramp onset7.1176 dB7.1176 dB±0.00000100 dB0 dB0.0 %
Room noise (ANSI S12.2-2019) 3/3
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleANSI S12.2:2019 Table 1 NC-40 curve, tangency self-consistency4040±1.00e-900.0 %
CumpleANSI S12.2:2019 Table D.1 RC-31 Mark II curve, 63 Hz level5151±1.00e-900.0 %
CumpleANSI S12.2:2019 clause D.4 RC-35 curve, mid-frequency average LMF3535±1.00e-900.0 %
Hearing threshold (ISO 7029 / ISO 389-7) 6/6
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleISO 7029:2017 Table 1 Median threshold, male age 60 at 4 kHz20.209 dB20.208 dB±0.001 dB-0.0000261 dB2.6 %
CumpleISO 7029:2017 Table 2 Upper spread su, male age 60 at 1 kHz10.153 dB10.153 dB±0.001 dB-0.0000319 dB3.2 %
CumpleISO 389-7:2005 Table 1 Free-field reference threshold at 1 kHz2.4 dB2.4 dB±1.00e-9 dB0 dB0.0 %
CumpleISO 389-1:1998 Table 1 nombra además (coupler) IEC 60303 RETSPL of the two named earphones at 1 kHz, and the TDH 39 at 125 HzDT 48, 1 kHz = 8 dB; TDH 39, 1 kHz = 7 dB; TDH 39, 125 Hz = 45 dBDT 48, 1 kHz = 8 dB; TDH 39, 1 kHz = 7 dB; TDH 39, 125 Hz = 45 dB±0 dB0 dB0.0 %
CumpleISO 389-1:1998 Table 2 nombra además (artificial ear) IEC 60318 RETSPL of any other supra-aural earphone at 6.3 kHz21 dB21 dB±1.00e-9 dB0 dB0.0 %
CumpleISO 389-1:1998 Clause 3.7 (hearing level against the audiometric zero) 40 dB HL at 4 kHz on a TDH 39 is the reference level plus 40 dB49.5 dB49.5 dB±1.00e-9 dB0 dB0.0 %
Measurement uncertainty (GUM / Supplement 1) 7/7
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleISO/IEC Guide 98-3-1 clause 9.2 Combined uncertainty, additive model22±1.00e-900.0 %
CumpleISO/IEC Guide 98-3 Table G.2 Coverage factor, p=0.99, v=162.922.921±0.0050.00120 %
CumpleISO/IEC Guide 98-3 Annex G.4 Welch-Satterthwaite effective dof4040±0.0000010000.0 %
CumpleISO/IEC Guide 98-3 Annex H.1 End-gauge combined uncertainty uc, nm31.71 nm31.71 nm±0.01 nm0.001 nm10 %
CumpleISO/IEC Guide 98-3 Annex H.1 End-gauge expanded uncertainty U99, nm92.1 nm92.1 nm±0.1 nm0.04 nm40 %
CumpleISO/IEC Guide 98-3 Annex H.2 (Table H.3) Correlated V/I/phi budget: uc(R), ohm0.071 ohm0.071 ohm±0.001 ohm0.0000714 ohm7.1 %
CumpleISO/IEC Guide 98-3-1 Table 3 (clause 9.2.3) Seeded Monte Carlo, rectangular sum: 95 % interval endpoint+/-3.88 (u = 2.0)+/-3.886 (u = 2.002)-0.006-
Noise-induced hearing loss (ISO 1999) 6/6
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleISO 1999:2013 Table D.2 Median NIPTS, 4 kHz, 90 dB, 20 yr13 dB12.9 dB±0.5 dB-0.057 dB11 %
CumpleISO 1999:2013 Table D.2 Worst-10 % NIPTS, 4 kHz, 90 dB, 20 yr18 dB17.8 dB±0.5 dB-0.239 dB48 %
CumpleISO 1999:2013 Table D.4 Worst-10 % NIPTS, 3 kHz, 100 dB, 40 yr60 dB59.8 dB±0.5 dB-0.172 dB34 %
CumpleISO 1999:2013 Annex C, Formulae (C.6) to (C.8) NIPTS at 1/2/4 kHz, 90 dB, 30 yr, Q = 10 % (annex inputs)0, 9, 19 dB0, 9, 19 dB-0 dB-
CumpleISO 1999:2013 Annex C, Formula (C.5) Compressed 4 kHz shift, Formula (1) with the annex's H = 36 dB13.3 dB13.3 dB±0.1 dB0 dB0.0 %
CumpleISO 1999:2013 Annex C, Formula (C.11) Hearing threshold level with age and noise, 1/2/4 kHz mean, Q = 10 %31.1 dB31.1 dB±0.1 dB0 dB0.0 %
Hearing protector attenuation (ISO 4869-1) 6/6
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleISO 4869-1:2018 Annex A, Table A.2 Within-laboratory budget: u and U95 from the three components30/30 cells of Table A.230/30 cells of Table A.2±000.0 %
CumpleISO 4869-1:2018 Annex B, Table B.2 Between-laboratory budget: u and U95 from the three components30/30 cells of Table B.230/30 cells of Table B.2±000.0 %
CumpleISO 4869-1:2018 Annex A, Table A.3 Earmuff on 16 subjects: mean, sigma, u = sigma/4 and U95, 7 bandsTable A.3 derived rows at 1 dp, 28 cellsmax deviation 0.000 dB-0.000 dB-
CumpleISO 4869-1:2018 Annex B, Table B.1 Two tests of one earmuff: criterion row, difference row and verdictcriterion row at 1 dp; difference row within 0.1 dB of the rounded m2; significant at 8000 Hz onlycriterion max deviation 0.000 dB; difference max deviation 0.056 dB; significant at 8000 Hz-0.056 dB-
CumpleISO 4869-1:2018 B.1.1 and B.2 Minimum significant difference sqrt(2) x U95, 250 Hz to 4 kHzA.2 earplug = 3.3 dB; A.2 earmuff = 2.3 dB; B.2 earplug = 9.3 dB; B.2 earmuff = 6.9 dBA.2 earplug = 3.3 dB; A.2 earmuff = 2.3 dB; B.2 earplug = 9.3 dB; B.2 earmuff = 6.9 dB±0 dB0 dB0.0 %
CumpleISO 4869-1:2018 Table 1 Allowable sound-field variation by microphone free-field rejection5/5 rows of Table 1, the last one 'not suitable'5/5 rows of Table 1±000.0 %
Hearing protectors (ISO 4869-2) 4/4
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleISO 4869-2:2018 Annex A, Table A.1 Assumed protection: mean and spread over 16 subjects, 8 bandsm_f and s_f equal to Table A.1 at 1 dp, all 8 bandsmax deviation 0.000 dB-0.000 dB-
CumpleISO 4869-2:2018 Formula (2), Annex B Octave-band method: Table B.1 net levels and L'p,A84Table B.1 rows exact; L'p,A84 = 81.4 dBrows within 0.000 dB; 81.4 dB-+0.000 dB-
CumpleISO 4869-2:2018 Formulae (12) to (15), Annex C HML method: 16 subject triples, statistics and H84/M84/L84Table C.2 exact; H84/M84/L84 = (24, 18, 13) dBwithin 0.000 dB; (24, 18, 13) dB-0.000 dB-
CumpleISO 4869-2:2018 Formulae (16) to (24) HML and SNR applications land on the annexes' 82 dBPNR84 = 22.5 dB; SNR84 = 21 dB; both report 82 dB22.5 dB; 21 dB; 82 and 82 dB-+0.000 dB-
Active noise reduction earmuffs (ISO 4869-6) 8/8
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleISO 4869-6:2019 Annex A, Table A.2 Within-laboratory budget of the mean active insertion loss5/5 cells of Table A.25/5 cells of Table A.2±000.0 %
CumpleISO 4869-6:2019 Annex A, Table A.3 Active insertion loss of 16 subjects: mean and sigma, 8 bands16/16 cells of the mean and sigma rows16/16 cells of the mean and sigma rows±000.0 %
CumpleISO 4869-6:2019 Annex A, Table A.3 u = sigma/4 and U95 = 2u, as the table forms them from its rounded rows16/16 cells from the rounded rows; 7 moved at full precision16/16 cells of the u and U95 rows±000.0 %
CumpleISO 4869-6:2019 5.5 b), calculation example Lower-ear active insertion loss from the MIRE levels, 16 x 24 cells384/384 cells of rows 134-149384/384 cells of rows 134-149±000.0 %
CumpleISO 4869-6:2019 5.5 a), calculation example REAT interpolated linearly in hertz into 24 one-third octaves384/384 cells of rows 182-197384/384 cells of rows 182-197±000.0 %
CumpleISO 4869-6:2019 5.5 c), calculation example Total attenuation per one-third octave, 16 x 24 cells384 cells of rows 206-221, within 0.05 dBmax deviation 0.050 dB-0.050 dB-
CumpleISO 4869-6:2019 Formula (1), calculation example Octave-band total attenuation of 16 subjects, 8 bands128 cells of rows 230-245, within 0.1 dBmax deviation 0.076 dB-0.076 dB-
CumpleISO 4869-6:2019 5.5 e), calculation example Mean, SD and APV84 of the octave totals16/16 cells of rows 247-248; APV84 within 0.1 dB of row 24916/16 cells; APV84 max deviation 0.083 dB-0.083 dB-
Multiple-shock whole-body vibration (ISO 2631-5) 6/6
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleISO 2631-5:2018 Formula 3 Daily acceleration dose, 5 x 40 m/s2 peaks55.97 m/s²55.97 m/s²±0.01 m/s²-0.002 m/s²20 %
CumpleISO 2631-5:2018 Formula C.3 Stress variable R, Annex C male example1.221.22±0.01-0.00002580.3 %
CumpleISO 2631-5:2018 Formula C.5 Injury probability, Annex C male example0.370.37±0.01-0.00330 %
CumpleISO 2631-5:2018 Annex C NOTE 5 Compressive stress Sd, female example1.4 MPa1.4 MPa±0.01 MPa-0.001 MPa10 %
CumpleISO 2631-5:2018 Annex C NOTE 5 Stress variable R, female example0.970.96±0.01-0.00880 %
CumpleISO 2631-5:2018 Formula 1 vs Annex D Table D.1 Seat-to-spine transfer vs the 256 Hz digital filter (0.5-80 Hz)max abs(Formula 1 - filter) ≤ 0.040.001±0.040.0012.5 %
Sound absorption in enclosed spaces (EN 12354-6) 2/2
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleEN 12354-6:2003 Formula 1 Equivalent absorption area, Annex E bare room2.26 m²2.26 m²±0.01 m²0.003 m²30 %
CumpleEN 12354-6:2003 Formula 5 Reverberation time, Annex E bare room2.1 s2.1 s±0.1 s0.003 s6.0 %
Audiometric test methods (ISO 8253) 19/19
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleISO 8253-1:2010 Table 2 Maximum permissible ambient levels for air conduction, three test ranges75/75 cells of Table 275/75 cells of Table 2±000.0 %
CumpleISO 8253-1:2010 Table 3 Average sound attenuation of the supra-aural, ER-3A and HDA 200 earphones75/75 cells of Table 375/75 cells of Table 3±000.0 %
CumpleISO 8253-1:2010 Table 4 Maximum permissible ambient levels for bone conduction, two test ranges50/50 cells of Table 450/50 cells of Table 4±000.0 %
CumpleISO 8253-1:2010 11.1 The limit at 1 kHz with each adjustment of 11.1 and the NOTE to Table 2supra-aural = 23 dB; ER-3A = 45 dB; shift +5 dB = 31 dB; lowest HL 10 dB = 33 dBsupra-aural = 23 dB; ER-3A = 45 dB; shift +5 dB = 31 dB; lowest HL 10 dB = 33 dB±0 dB0 dB0.0 %
CumpleISO 8253-1:2010 A.3.3 Audiometer standard uncertainty, air conduction up to 4 kHz, 5 dB stepsu(delta_eq) = 2.3 dBu(delta_eq) = 2.3 dB±0 dB0 dB0.0 %
CumpleISO 8253-1:2010 A.3.4 Transducer standard uncertainty up to and above 4 kHzup to 4 kHz = 2.9 dB; above 4 kHz = 3.9 dBup to 4 kHz = 2.9 dB; above 4 kHz = 3.9 dB±0 dB0 dB0.0 %
CumpleISO 8253-1:2010 Table A.2 The four components, combined and expanded uncertainty, air conduction below 4 kHz, no maskingu1 L'_HT = 2.5 dB; u2 delta_eq = 2.3 dB; u3 delta_tr = 2.9 dB; u4 delta_n = 2 dB; u = 4.9 dB; U = 10 dBu1 L'_HT = 2.5 dB; u2 delta_eq = 2.3 dB; u3 delta_tr = 2.9 dB; u4 delta_n = 2 dB; u = 4.9 dB; U = 10 dB±0 dB0 dB0.0 %
CumpleISO 8253-1:2010 6.2.4.2 Ascending method: three responses at one level out of five ascentsthreshold = 30 dBthreshold = 30 dB±0 dB0 dB0.0 %
CumpleISO 8253-1:2010 6.2.4.3 Bracketing method: mean of the two averages to the nearest 5 dB stepmean = 33.333 dB; threshold = 35 dBmean = 33.333 dB; threshold = 35 dB±0 dB0 dB0.0 %
CumpleISO 8253-1:2010 6.3.5 Automatic recording: first reversal and small excursions dropped, rounded uppeaks = 30.5 dB; valleys = 20 dB; mean = 25.25 dB; threshold = 26 dBpeaks = 30.5 dB; valleys = 20 dB; mean = 25.25 dB; threshold = 26 dB±0 dB0 dB0.0 %
CumpleISO 8253-1:2010 7.5 Sweep-frequency audiometry: three nearest peaks and valleys, roundedmean = 25.3 dB; threshold = 25 dBmean = 25.3 dB; threshold = 25 dB±0 dB0 dB0.0 %
CumpleISO 8253-1:2010 6.2.3.2, Step 3 Repeat at 1 kHz: 5 dB or less agrees, 10 dB or more retests further4/4 repeats judged as Step 3 words it4/4 repeats judged as Step 3 words it±000.0 %
CumpleISO 8253-1:2010 6.2.3.2 Cross-hearing: a hearing level of 40 dB or more calls for caution3/3 levels judged as 6.2.3.2 words it3/3 levels judged as 6.2.3.2 words it±000.0 %
CumpleISO 8253-1:2010 8.4 Average vibrotactile threshold, mastoid and forehead placement250 Hz mastoid = 40 dB; 500 Hz mastoid = 60 dB; 1000 Hz mastoid = 70 dB; 250 Hz forehead = 30 dB; 500 Hz forehead = 50 dB; 1000 Hz forehead = 60 dB250 Hz mastoid = 40 dB; 500 Hz mastoid = 60 dB; 1000 Hz mastoid = 70 dB; 250 Hz forehead = 30 dB; 500 Hz forehead = 50 dB; 1000 Hz forehead = 60 dB±0 dB0 dB0.0 %
CumpleISO 8253-2:2009 Table 2 Maximum permissible ambient levels for sound field audiometry, to 12.5 kHz54/54 cells of Table 254/54 cells of Table 2±000.0 %
CumpleISO 8253-2:2009 Table 2, footnote a Derived from ISO 8253-1 for binaural listening; the cells equal Table 4 less 3 dB, an offset the library reads off the two tables50/50 cells equal to Table 4 less 3 dB50/50 cells equal to Table 4 less 3 dB±000.0 %
CumpleISO 8253-2:2009 Table B.1 Increase at the nearer ear at 45 and 90 degrees, 125 Hz to 12.5 kHz48/48 cells of Table B.148/48 cells of Table B.1±000.0 %
CumpleISO 8253-2:2009 Table 1 Allowable field variation by the microphone's front-to-random indexindex 5 dB = 5 dB; index 4.5 dB = 4.5 dB; index 4 dB = 4 dBindex 5 dB = 5 dB; index 4.5 dB = 4.5 dB; index 4 dB = 4 dB±0 dB0 dB0.0 %
CumpleISO 8253-2:2009 5.2 c) and 5.4 c) Axial level difference the inverse distance law gives at 1 m (closed form; the standard prints no value)free = 2.626 dB; quasi-free = 1.743 dBfree = 2.626 dB; quasi-free = 1.743 dB±0 dB0 dB0.0 %
Earmuff insertion loss on a test fixture (ISO 4869-3) 4/4
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleISO 4869-3:2007 Table B.1 and B.4 Combined and expanded uncertainty of the typical budgetu = 1.3 dB; U = 2.6 dBu = 1.3 dB; U = 2.6 dB±0 dB0 dB0.0 %
CumpleISO 4869-3:2007 5.2.2, Table 1 Allowable field variation, read with the text for an index of 5 dBindex 5 dB = 5 dB; index 4.5 dB = 4 dB; index 4 dB = 4 dBindex 5 dB = 5 dB; index 4.5 dB = 4 dB; index 4 dB = 4 dB±0 dB0 dB0.0 %
CumpleISO 4869-3:2007 Table A.1 Front-to-random index of the fixture, and the bands it may test itself14/14 cells of Table A.1 and its suitable bands14/14 cells of Table A.1 and its suitable bands±000.0 %
CumpleISO 4869-3:2007 5.1.4 Least acoustic isolation of the fixture in each band, 63 Hz to 8 kHz22/22 bands of 5.1.422/22 bands of 5.1.4±000.0 %
Impulsive sound exposure distribution (ISO 13474) 7/7
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleISO 13474:2009 Equations (10) to (13), Table A.4 Sorted levels and class boundaries of the 27 classes81/81 levels and boundaries of Table A.481/81 levels and boundaries of Table A.4±000.0 %
CumpleISO 13474:2009 Equation (14), Table A.4 Probability of each class over 07:00 to 19:00, sorted with its level27/27 probabilities of Table A.427/27 probabilities of Table A.4±000.0 %
CumpleISO 13474:2009 Equation (15), Table A.4 Probability density of each class, in 1/dB27/27 densities of Table A.427/27 densities of Table A.4±000.0 %
CumpleISO 13474:2009 Equation (7), Figure A.3 Long-term average single-event level LT1 of the TOW launcher37 dB37.01 dB±0.05 dB0.01 dB20 %
CumpleISO 13474:2009 Equation (A.4), Figure A.3 Long-term level LT2 from the distribution spread with sigma = 5 dB37 dB36.96 dB±0.05 dB-0.042 dB84 %
CumpleISO 13474:2009 Equation (22) Shift of the Gaussian subclasses at sigma = 5 dB, against the printed integral2.878231366 dB2.878231366 dB±0.000000001 dB0 dB0.0 %
CumpleISO 13474:2009 Equation (25), Figure A.3 Level exceeded by 50 % of the events, L5031.5 dB31.46 dB±0.05 dB-0.044 dB88 %
Soundscape analysis (ISO/TS 12913-3:2019; the 2025 edition revises Annex A) 14/14
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleISO/TS 12913-3:2019 A.2, Table A.1 Scale value of each of the five boxes of the four parts of Method A20/20 scale values of Table A.120/20 scale values of Table A.1±000.0 %
CumpleISO/TS 12913-3:2019 Formulas (A.1) and (A.2) Every attribute at one score puts the respondent at the origin0max |P|, |E| below 1e-12±0.00000000000100.0 %
CumpleISO/TS 12913-3:2019 A.3 Range of the coordinates, 4 + sqrt(32), printed as 9.669.669.6569±0.005-0.003162 %
CumpleISO/TS 12913-3:2019 A.3 The four extremes of P and E divided by 4 + sqrt(32) are plus and minus 14/4 normalised extremes at plus or minus 14/4 normalised extremes at plus or minus 1±000.0 %
CumpleISO/TS 12913-3:2019 Figure A.1, Formulas (A.1) and (A.2) Each attribute raised alone moves the point along its own arrow of the figure8/8 attribute axes of Figure A.18/8 attribute axes of Figure A.1±000.0 %
CumpleISO/TS 12913-3:2019 Formula (A.3) Spearman's coefficient without ties is Pearson's coefficient of the ranks0.93006993010.9300699301±1.00e-1200.0 %
CumpleISO/TS 12913-3:2019 Formula (A.4) against scipy.stats.spearmanr Spearman's coefficient with ties, on 93 real ordinal answers-0.3898917508-0.3898917508±1.00e-1200.0 %
CumpleISO/TS 12913-3:2019 A.4 against scipy.stats.spearmanr Probability value of Spearman's coefficient, Student t with n - 2 degrees of freedom0.000122140.00012214±1e-7%00.0 %
CumpleISO/TS 12913-3:2019 Formulas (B.1) and (B.2) against scipy.stats.pearsonr Pearson's coefficient with the covariance over n-0.3898445719-0.3898445719±1.00e-1200.0 %
CumpleISO/TS 12913-3:2019 B.2 against scipy.stats.t.interval Upper end of the 95 % confidence interval of a Method B mean3.58920882753.5892088275±1.00e-1200.0 %
CumpleISO/TS 12913-3:2019 Table D.1 Metrics of each parameter and the representative-value rule, as printed24/24 cells of Table D.124/24 cells of Table D.1±000.0 %
CumpleISO/TS 12913-3:2019 D.2 Representative LAeq,T of two ears 6 dB apart is the louder ear's77.3004 dB77.3004 dB±1.00e-9 dB0 dB0.0 %
CumpleISO/TS 12913-2:2018 Figures C.2 to C.6 Response categories of the four parts of Method A, and the eight attributes33/33 printed strings of Annex C33/33 printed strings of Annex C±000.0 %
CumpleISO/TS 12913-2:2018 A.3 f) resuelto con ISO 532-1:2017 Root mean cubed loudness Nrmc of an ear, by the formula of the NOTE18.24539218.245392±1e-10%00.0 %
Prominent discrete tones (ECMA-418-1) 2/2
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleECMA-418-1:2024 Clause 10 Formula (2) Critical band at 1 kHz (f1,c / f2,c / dfc)dfc 162.2 Hz (+/-0.05 Hz); edges 922.2-1084.4 Hzdfc 162.22 Hz; edges 922.2-1084.4 Hz-0.017 Hz-
CumpleECMA-418-1:2024 Clause 11.6 Formula (14) Proximity spacing dfprox at 150 / 850 Hz23 Hz @ 150 Hz; 63.8 Hz @ 850 Hz (+/-0.5 Hz)23.0 Hz; 63.8 Hz-+0.004; +0.044 Hz-
Tonal audibility (ISO/PAS 20065) 11/11
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleISO/PAS 20065:2016 Formulae (12)-(14) Audibility at 137.3 Hz, Annex E spectrum 14.99 dB5.01 dB±0.05 dB0.022 dB44 %
CumpleISO/PAS 20065:2016 Formula (13) Masking index av at 137.3 / 592.2 Hz-2.02 dB @ 137.3 Hz; -2.4 dB @ 592.2 Hz (+/-0.005 dB)-2.017 dB; -2.400 dB-+0.003; +0.000 dB-
CumpleISO/PAS 20065:2016 Formula (20) Mean audibility of the five spectra, Annex E6.96 dB6.98 dB±0.05 dB0.018 dB36 %
CumpleISO/PAS 20065:2016 Formula (6) Mean narrow-band level LS from spectrum, Table E.149.22 dB49.22 dB±0.02 dB-0.001 dB5.0 %
CumpleISO/PAS 20065:2016 Clause 6 Extended uncertainty U of the 137.3 Hz tone, Table E.22.79 dB2.8 dB±0.02 dB0.006 dB30 %
CumpleISO/PAS 20065:2016 Formulae (28)-(29) Extended uncertainty of the mean audibility, Annex E Step 41.38 dB1.38 dB±0.01 dB-0.003 dB30 %
CumpleISO/PAS 20065:2016 Formula (8) Tone level LT from spectrum, Table E.167.96 dB67.96 dB±0.02 dB-0.005 dB25 %
CumpleISO/PAS 20065:2016 Clause 5.3.8 Tone detection over the spectrum, Table E.1tones at [118.4, 137.3, 158.8] Hztones at [118.4, 137.3, 158.8] Hz-exact-
CumpleISO/PAS 20065:2016 Clause 5.3.8 Step 3 Same-band FG combination inside analyze_spectrum, Table E.2 row 2 FG72.15 dB72.15 dB±0.02 dB-0.002 dB10 %
CumpleISO/PAS 20065:2016 Formula (17) Multi-tone FG combination, Table E.172.15 dB72.15 dB±0.02 dB-0.002 dB10 %
CumpleISO/PAS 20065:2016 Formulae (18)/(19) Two-tone separation fD (DIN 45681 Annex J), 137.3 / 212 HzfD(137.3)=24.09, fD(212)=21.0 Hz; Annex E pair combinedfD(137.3)=24.09, fD(212)=21.00 Hz; Annex E pair combined-exact-
Psychoacoustic annoyance & fluctuation strength (Fastl & Zwicker) 3/3
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleFastl & Zwicker Eqs (16.2)-(16.4) Psychoacoustic annoyance, worked (N5,S,F,R) tuple37.047837.0477±0.001-0.000110 %
CumpleFastl & Zwicker Eq (10.2) Fluctuation strength of AM broadband noise (60 dB, m=1, 4 Hz)3.6943 vacil3.6943 vacil±0.001 vacil-0.0000325 vacil3.2 %
CumpleFastl & Zwicker Ch. 10 corroborado por Osses et al.:2016 Fluctuation-strength calibration: 1 kHz / 60 dB / m=1 / 4 Hz AM tone1 vacil1 vacil±0.05 vacil0 vacil0.0 %
Electroacoustics: distortion & frequency response 20/20
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleIEC 60268-3:2013 (14.12.3.2) THD (rel. total RMS, the R convention the clause defines)0.1128530.112853±0.000100.0 %
CumpleClosed-form harmonic synthesis (THD_F convention) THD (rel. fundamental, the widespread datasheet convention)0.1135780.113578±0.000100.0 %
CumpleIEC 60268-5:2003 (20.3/20.4) Characteristic sensitivity level, 1 W into 8 ohm at 1 m (flat 90 dB)90 dB90 dB±0.000001 dB0 dB0.0 %
CumpleIEC 60268-5:2003 (21.2) Effective frequency range = -10 dB crossings (50 Hz / 18 kHz)50 Hz / 18000 Hz (ref -10 dB crossings)50.000 Hz / 18000.0 Hz--0.000 / -0.000 Hz-
CumpleIEC 60268-3:2013 (14.12.5) 2nd-order harmonic distortion d2 (rel. total)0.0993610.099361±0.000100.0 %
CumpleIEC 60268-4:2014 (11.1/11.3) Microphone sensitivity level, 12.5 mV/Pa -> 20 lg 0.0125 dB re 1 V/Pa-38.0618 dB-38.0618 dB±0.00001 dB2.60e-7 dB2.6 %
CumpleIEC 60268-4:2014 (12.2) Effective frequency range = +/-3 dB tolerance crossings (40 Hz / 18 kHz)40 Hz / 18000 Hz (+/-3 dB tolerance crossings)40.000 Hz / 18000.0 Hz-0.000 / -0.000 Hz-
CumpleIEC 60268-4:2014 (13.2.2) Directivity index of the ideal cardioid, 10 lg 3 dB (11.2.2 a integral)4.771213 dB4.771214 dB±0.005 dB0.000001 dB0.0 %
CumpleIEC 60268-4:2014 (17.2) Equivalent noise level, 2.5 uV over 12.5 mV/Pa -> 200 uPa = 20 dB SPL20 dB SPL20 dB SPL±1.00e-9 dB SPL0 dB SPL0.0 %
CumpleIEC 60268-3:2013 (14.12.7.2 g) Modulation distortion d_m,2 (arithmetic sideband sum over U_2,f2)0.160.16±0.000100.0 %
CumpleIEC 60268-3:2013 (14.12.7.2 h) Modulation distortion d_m,3 (arithmetic sideband sum over U_2,f2)0.080.08±0.000100.0 %
CumpleIEC 60268-3:2013 (14.12.8.1 a) Difference-frequency distortion d_d,2 (over U_2,ref = 2 U_2,f2)0.030.03±0.000100.0 %
CumpleIEC 60268-3:2013 (14.12.8.1 b) Difference-frequency distortion d_d,3 (arithmetic product sum)0.040.04±0.000100.0 %
CumpleIEC 60268-3:2013 (14.12.10) Total difference-frequency distortion (8 kHz / 11.95 kHz tones)0.036055510.03605551±0.000100.0 %
CumpleITU-R BS.468-4 Table 1 Weighting network response at the 6.3 kHz peak (14.12.11 network)12.2 dB12.2167 dB±0.05 dB0.0167 dB33 %
CumpleIEC 60268-3:2013 (14.12.9) DIM of the 15 kHz / 3.15 kHz signal (Table 2, 9 products)0.1688190.168819±0.000100.0 %
CumpleBendat & Piersol, Random Data:4e H1 recovers a known first-order IIR gain at 1 kHz0.89540.8954±2%0.00003410.2 %
CumpleBendat & Piersol, Random Data:4e Ordinary coherence = 1 for a noiseless LTI path11±0.001-3.41e-70.0 %
CumpleAES17:2015 (6.4.2 / 5.2.7) Idle channel noise, 1 kHz -20 dBFS tone (CCIR-RMS -5.63 dB offset)-25.63 dB-25.63 dB±0.01 dB0 dB0.0 %
CumpleAES17:2015 (6.4.1) Dynamic range, full-scale reference over a -40 dBFS residual at 2 kHz40 dB40.38 dB±0.6 dB0.385 dB64 %
Calibrated spectral analysis (Bendat & Piersol) 12/12
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleBendat & Piersol, Random Data:4e Eq. (5.67) White-noise autospectral density = sigma^2/(fs/2)0.0009770.000982±3%0.00000517 %
CumpleBendat & Piersol, Random Data:4e Eq. (8.158) PSD random error = 1/sqrt(nd) (Monte Carlo, 100 seeded records)0.17680.1764±6%-0.00043.8 %
CumpleBendat & Piersol, Random Data:4e Eq. (8.163) 95% chi-square confidence interval coverage (Monte Carlo)0.950.94±0.025-0.0140 %
CumpleBendat & Piersol, Random Data:4e Eqs. (9.55)/(6.39) Coherent output spectrum of a known-SNR path: gamma^2 = SNR/(1+SNR)0.71910.7255±0.030.006421 %
CumpleClosed-form power-law slope (10*lg(2) dB/octave per unit exponent) Pink-noise PSD slope over 20 Hz - 20 kHz, dB/octave-3.0103 dB/oct-3.0116 dB/oct±0.05 dB/oct-0.0013 dB/oct2.6 %
CumpleIEC 60268-1:1985 Clause A2.1 / Table AII 5 ms burst of 5 kHz tone at 48 kHz: gate RMS = A/sqrt(2) (integral periods)0.7071070.707107±1.00e-1200.0 %
CumpleHarris:1978 closed form (DFT-even Hann) Hann window ENBW = n*sum(w^2)/sum(w)^2 = 3/2 exactly1.51.5±1.00e-1200.0 %
CumpleConstant-power 1/n-octave kernel (closed form) 1/3-octave smoothed line level = P*df/(f0*(2^(1/6)-2^(-1/6)))0.0215920.021592±1e-7%00.0 %
CumplePercival & Walden:1993 Table 382 Slepian taper concentration lambda_14(31, 8/31), quadruple-precision table0.929438220820.92943822082±0.00000000000100.0 %
CumplePercival & Walden:1993 Section 7.2 / Eq. (333) Multitaper white-noise density = sigma^2/(fs/2), NW=4, K=7 tapers0.0009770.000963±3%-0.00001448 %
CumplePercival & Walden:1993 Eq. (369a) tone calibration Multitaper 'spectrum' scaling reads a sinusoid peak at A^2/24.54.500003±0.01%0.0000030.7 %
CumplePercival & Walden:1993 Eq. (370b) Adaptive multitaper dof -> 2K on white noise (weights -> uniform)1413.9847±2%-0.01535.5 %
Multiple-input coherence (Bendat & Piersol) 5/5
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleBendat & Piersol, Random Data:4e Problem 7.2 / Eqs. (7.86)/(7.94) Conditioned coherent output of the 2nd input abs(G2y.1)^2/G22.1 = 4/3 exactly1.3333333331.333333333±1.00e-1200.0 %
CumpleBendat & Piersol, Random Data:4e Problem 7.2 / Eqs. (7.87)/(7.116) Partial coherence gamma^2_2y.1 = 2/15 and multiple coherence = 0.70.70.7±1.00e-1200.0 %
CumpleBendat & Piersol, Random Data:4e Eq. (7.35) with Eqs. (6.40)/(6.41) Multiple coherence of a known-SNR system: gamma^2_{y:x} = SNR/(1+SNR)0.88890.8913±0.030.00248.0 %
CumpleBendat & Piersol, Random Data:4e Eq. (7.117) Uncorrelated inputs: multiple coherence = sum of ordinary coherences0-0.0098±0.02-0.009849 %
CumpleBendat & Piersol, Random Data:4e Eqs. (7.88)/(7.121) Output-power decomposition Gyy = sum of Gvi + Gnn (exact)00±0.00000000000100.0 %
Time-frequency analysis (Bendat & Piersol) 3/3
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleBendat & Piersol, Random Data:4e Eq. (12.173) Spectrogram of an on-bin tone reads its mean square A^2/2 in every column22±1e-7%00.0 %
CumpleParseval + COLA identity (Hann taper, 75% overlap) Time-integrated STFT power = time-domain energy of an interior burst0.2361510.236151±1e-10%00.0 %
CumpleBendat & Piersol, Random Data:4e Eqs. (11.128)-(11.130) Zoom FFT tone amplitude = demodulate-decimate-DFT chain, machine precision0.70.7±1e-10%00.0 %
Correlation, time delay and envelope (B&P / Knapp & Carter) 7/7
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleBendat & Piersol, Random Data:4e Eq. (5.21) Cross-correlation peak of a 16-sample pure delay, samples1616±0.001-0.000005040.5 %
CumpleKnapp & Carter:1976 Table I (PHAT) + sub-sample interpolation GCC-PHAT estimate of an exact 12.25-sample fractional delay, samples12.2512.2483±0.005-0.001734 %
CumpleBendat & Piersol, Random Data:4e Eq. (5.101) Cross-spectrum phase-slope estimate of the same fractional delay12.2512.2498±0.001-0.000220 %
CumpleBendat & Piersol, Random Data:4e Eq. (8.120) BLWN autocorrelation coefficient at 3 samples vs sin(2piBt)/(2piBt)-0.1559-0.1666±0.02-0.010753 %
CumpleBendat & Piersol, Random Data:4e Example 8.5 Random error of the correlation peak: B=100 Hz, T=5 s, M/S=N/S=100.350.3493±0.001-0.000770 %
CumpleBendat & Piersol, Random Data:4e Table 13.1 Hilbert transform of cos recovers sin: max interior error06.16e-11±1.00e-96.16e-116.2 %
CumpleBendat & Piersol, Random Data:4e Eq. (13.27) Envelope of an AM waveform recovers 1 + m*cos(2pi*fm*t) exactly01.23e-12±1.00e-91.23e-120.1 %
Cepstrum, liftering and envelope spectrum (Havelock / B&P) 3/3
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleHavelock:2008 Ch. 27 Fig. 21 + Mercator series of ln(1+a*e^{-j*theta}) Power-cepstrum height at the echo delay = reflection coefficient a0.40.4±1.00e-1000.0 %
CumpleHavelock:2008 Ch. 87 Eq. (14): complex cepstrum, series term n = 2 Second rahmonic of a reflection a = 0.4 equals -a^2/2-0.08-0.08±1.00e-1000.0 %
CumpleBendat & Piersol, Random Data:4e Sec. 13.3 (Fig. 13.11) Envelope-spectrum line of an AM tone (A0 = 2, m = 0.35) at fm0.70.7±0.00200.0 %
Time synchronous averaging (McFadden 1987) 5/5
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleMcFadden:1987 Eq. 8 / Eq. 9: comb filter \|C(f)\| at a harmonic k/T Comb-filter tooth height at a harmonic equals unity (any N)11±1.00e-1000.0 %
CumpleMcFadden:1987 Eq. 8: comb filter one quarter-order from a tooth, N = 2 Comb-filter magnitude = 1/sqrt(2) at order 0.250.707106780.70710678±1.00e-1000.0 %
CumpleMcFadden:1987 Sec. 4 (Fig. 5): node selection, tone at 32.05 orders N = 20 places a comb node on 32.05 orders (\|C\| = 0), not the power-of-2 N = 3200±0.000000000100.0 %
CumpleMcFadden:1987 Eq. 5: exact recovery, integer samples per period Noiseless periodic waveform (M = 256) recovered to machine precision00±0.000000000100.0 %
CumpleMcFadden:1987 Sec. 1: asynchronous-noise variance reduced by 1/N Residual noise std of the average falls as sigma/sqrt(N), N = 640.1250.12414±15%-0.000864.6 %
Data qualification and Rice statistics (Bendat & Piersol) 8/8
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleBendat & Piersol, Random Data:4e Example 4.4 Reverse arrangements of the 20-observation sequence8686±000.0 %
CumpleBendat & Piersol, Random Data:4e Table A.6 Lower percentage point A(20; 0.975) at alpha = 0.056464±000.0 %
CumpleBendat & Piersol, Random Data:4e Table A.6 Upper percentage point A(20; 0.025) at alpha = 0.05125125±000.0 %
CumpleWald & Wolfowitz:1940 exact run distribution Runs acceptance region for n1 = n2 = 10, alpha = 0.05: lower point66±000.0 %
CumpleWald & Wolfowitz:1940 exact run distribution Runs acceptance region for n1 = n2 = 10, alpha = 0.05: upper point1515±000.0 %
CumpleBendat & Piersol, Random Data:4e Example 5.13 / Eq. (5.195) Zero-crossing rate of bandlimited noise (fc = 1 kHz, B = 400 Hz)20132013±1%-0.5512.7 %
CumpleBendat & Piersol, Random Data:4e Example 5.12 Apparent frequency of low-pass noise (B = 2 kHz) = 0.577 B11551159±1%3.91134 %
CumpleBendat & Piersol, Random Data:4e Example 5.14 / Eq. (5.206) Prob[positive peak > 4 sigma] of a narrow bandwidth record0.0003350.000334±0.00001-0.00000110.0 %
Underwater acoustics (ISO 18405/17208/18406) 6/6
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleISO 18405:2017 corroborado por ISO 18406 Formula 7 Sound pressure level of a synthetic tone, dB re 1 µPa123.0103123.0103±0.000100.0 %
CumpleISO 18405:2017 corroborado por ISO 18406 Formulae 3-4 Sound exposure level of a 2 s tone, dB re 1 µPa²·s120120±0.00100.0 %
CumpleISO 18406:2017 (6.4.2.1.3) Peak sound pressure level of a known waveform, dB re 1 µPa129.5424129.5424±0.000100.0 %
CumpleISO 17208-1:2016 Radiated noise level from RMS pressure and distance, dB re 1 µPa·m46.020646.0206±0.000100.0 %
CumpleISO 17208-2:2019 (Formula 3) Lloyd's-mirror surface correction ΔL at a known k·d_s-3.5211-3.5211±0.000100.0 %
CumpleISO 18406:2017 (Formulae 8-9) Cumulative SEL of N identical strikes = SEL_ss + 10·lg(N)196.9897196.9897±0.0000010000.0 %
Underwater sound propagation (propagation loss) 16/16
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleMackenzie:(1981) nine-term equation Speed of sound at 25 °C, 35 ‰, 1000 m (canonical check value), m/s1550.744 m/s1550.744 m/s±0.01 m/s0.0000275 m/s0.3 %
CumpleUNESCO/Chen-Millero comparado con Mackenzie Sound-speed agreement at 10 °C, 35 ‰, 1000 m (cross-model), m/s1506.264 m/s1506.524 m/s±1 m/s0.261 m/s26 %
CumpleDel Grosso:(1974) comparado con Mackenzie Sound-speed agreement at 10 °C, 35 ‰, 1000 m (cross-model), m/s1506.264 m/s1506.313 m/s±1 m/s0.049 m/s4.9 %
CumpleSpherical spreading 20·lg(R) Geometrical spreading loss at R = 1000 m, dB60 dB60 dB±1.00e-9 dB0 dB0.0 %
CumpleThorp:(1967) absorption Volume absorption α at 10 kHz (cold deep water), dB/km1.1498 dB/km1.1498 dB/km±0.00000100 dB/km0 dB/km0.0 %
CumpleAinslie-McColm:(1998) comparado con Francois-Garrison:(1982) Absorption agreement at 10 kHz, 10 °C, 35 ‰, 0 m, pH 8, dB/km0.9626 dB/km0.9866 dB/km±0.0963 dB/km0.0239 dB/km25 %
CumpleFrancois-Garrison:(1982) Part II Table IV Absorption α at 100 kHz, 10 °C, 35 ‰, 0 m, pH 8 (printed value), dB/km33.6 dB/km33.63 dB/km±0.05 dB/km0.03 dB/km60 %
CumpleDel Grosso refit (Wong-Zhu 1995 Table IV) c(t90 = 20 °C, S = 35, P = 500 bar) vs the printed check table, m/s1603.679 m/s1603.679 m/s±0.001 m/s0.000444 m/s44 %
CumpleWales-Heitmeyer:(2002) ensemble spectrum Merchant-ship source PSD at 100 Hz (printed equation), dB re 1 µPa²/Hz158.45 dB158.45 dB±0.001 dB0.0000117 dB1.2 %
CumplePassive sonar equation (Urick/Etter) Figure of merit SL − (NL − DI) − DT, dB85 dB85 dB±1.00e-9 dB0 dB0.0 %
CumpleSeabed reflection (Rayleigh, normal incidence) Bottom loss at 90° grazing, sand ρ=1900 c=1650 over water, dB9.0506 dB9.0506 dB±0.00000100 dB0 dB0.0 %
CumpleWenz wind noise (rule of fives) Wind spectrum level at 1 kHz, 5 kt (canonical anchor), dB re 1 µPa²/Hz51.0206 dB51.0206 dB±0.0001 dB-8.67e-8 dB0.1 %
CumpleMellen thermal noise Thermal spectrum level at 50 kHz, 16.85 °C (physical), dB re 1 µPa²/Hz19.3426 dB19.3426 dB±0.00000100 dB0 dB0.0 %
CumpleJOMOPANS-ECHO ship source level Bulker V=13.5 kt L=211 m band level at 1 kHz (File S1 oracle), dB re 1 µPa m161.394 dB161.394 dB±0.01 dB-0.000290 dB2.9 %
CumpleUNESCO sound speed (EOS-80 canonical value) SVEL(S = 40, T68 = 40 °C, P = 1000 bar) vs Fofonoff & Millard 1983, m/s1731.995 m/s1732.004 m/s±0.02 m/s0.009 m/s45 %
CumpleMedwin:(1975) sound speed nombra además Ainslie Eqs. 1.2-1.4 ∂c/∂T at 10 °C, neglecting the bracketed terms, m/s per °C3.5 m/s per °C3.5 m/s per °C±0.001 m/s per °C-8.03e-9 m/s per °C0.0 %
Underwater propagation regimes (Weston flux theory) 3/3
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleAinslie:(2010) Table 9.1, medium sand Reflection loss gradient η from Equation (9.51), Np/rad0.28 Np/rad0.278 Np/rad±0.005 Np/rad-0.002 Np/rad40 %
CumpleAinslie:(2010) Table 9.1, mud Reflection loss gradient η from Equation (9.53) at 1 Hz, Np/rad0.021 Np/rad0.02073 Np/rad±0.0005 Np/rad-0.00027 Np/rad54 %
CumpleWeston cylindrical spreading vs normal modes Range-averaged PL in an ideal 100 m waveguide at 100 Hz, 20-30 km, dB58.949 dB58.399 dB±1 dB-0.55 dB55 %
Marine-mammal auditory weighting (NMFS / Southall) 4/4
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleNMFS:(2018) Appendix D worked example Weighting factor adjustment W(1 kHz) for high-frequency cetaceans, dB-37.55 dB-37.545 dB±0.01 dB0.005 dB50 %
CumpleNMFS:(2024) v3.0 Table 5, otariid C C recomputed as the peak of W(f) for the OW row (printed 1.37, corrected 1.36), dB1.3643 dB1.3643 dB±0.0005 dB-0.0000114 dB2.3 %
CumpleAinslie:(2010) Equation (11.159), orca audiogram Hearing threshold at 50 kHz (third branch), dB re 1 µPa51.2 dB51.199 dB±0.05 dB-0.001 dB2.0 %
CumpleAinslie:(2010) §11.4.6, orca versus salmon Noise-limited figure of merit (SL + TS − NL + AG − DT)/2, dB re m²51 dB51 dB±0.00000100 dB0 dB0.0 %
Underwater numerical propagation (modes / rays / PE) 5/5
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleNormal modes vs ideal waveguide Fundamental horizontal wavenumber kr1 at 20 Hz, 100 m (analytic), rad/m0.077662 rad/m0.077662 rad/m±0.0001 rad/m8.19e-9 rad/m0.0 %
CumpleNormal modes vs image-source oracle Absolute PL at 1 km in the ideal waveguide (converged image sum), dB48.238 dB48.239 dB±0.02 dB0.001 dB5.0 %
CumpleRay tracing vs linear gradient Turning depth of a 10° ray, c = 1500 + 0.05z (circular arc), m462.8 m462.8 m±1 m-4.74e-7 m0.0 %
CumpleRay travel time vs iso-gradient closed form Travel time of a 10° ray at 10 km, c = 1500 + 0.05z (Medwin & Clay Eq. 3.3.20), s6.625942 s6.625942 s±0.000001 s0 s0.0 %
CumpleParabolic equation vs free field PE propagation loss at 2 km, homogeneous medium (spherical spreading), dB66.021 dB66.021 dB±0.1 dB0.0000140 dB0.0 %
Sonar processing gain and detection (Ainslie 2010) 4/4
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleAinslie:(2010) Sect. 6.1.2.1, printed folio 267 Line-array DI at broadside, high-frequency limit 10 log10(2L/lambda), dB23.01 dB23.015 dB±0.01 dB0.004 dB40 %
CumpleAinslie:(2010) Sect. 6.1.2.1, printed folio 267 Line-array DI at endfire, where the footprint halves: 10 log10(4L/lambda), dB26.021 dB26.023 dB±0.01 dB0.002 dB20 %
CumpleAinslie:(2010) Eq. (11.20), Fig. 11.1 Unsteered DI vs the book's own approximation 1 + G0 tanh(pi^2 G0/36) at 2L/lambda = 2013.22 dB13.05 dB±0.5 dB-0.168 dB34 %
CumpleAinslie:(2010) Eq. (11.22), printed folio 581 Detection threshold at 50 % detection probability, p_fa = 1e-4, dB10.0947 dB10.0947 dB±1.00e-9 dB0 dB0.0 %
Aircraft noise (ICAO Annex 16 / IEC 61265) 28/28
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleECAC Doc 29 noise fraction (half path) Finite-segment correction ΔF for a perpendicular foot at the segment start, dB-3.0103 dB-3.0103 dB±0.001 dB-0.00000184 dB0.2 %
CumpleECAC Doc 29 single-event chain SEL of a long level flyover vs the infinite-path limit LE∞ + ΔI − Λ, dB83.444 dB83.444 dB±0.01 dB-6.57e-8 dB0.0 %
CumpleECAC Doc 29 impedance adjustment (standard atmosphere) Acoustic-impedance adjustment of NPD data at 15 °C / 101.325 kPa (Eq. 4-6/4-7), dB0.074 dB0.0741 dB±0.0005 dB0.0001 dB20 %
CumpleECAC Doc 29 reference workbook (segment Λ) Lateral attenuation of a climbing segment vs the ECAC Vol 3 Part 1 workbook, dB6.3769 dB6.3769 dB±0.01 dB3.81e-11 dB0.0 %
CumpleECAC Doc 29 start-of-roll directivity (jet) ΔSOR behind a takeoff ground-roll segment vs the Vol 3 Part 1 workbook, dB0.3196 dB0.3196 dB±0.01 dB-0.0000272 dB0.3 %
CumpleECAC Doc 29 start-of-roll directivity (turboprop) ΔSOR behind a takeoff ground-roll segment (turboprop, Eq. 4-24b), dB1.0943 dB1.0944 dB±0.01 dB0.0001 dB1.0 %
CumpleECAC Doc 29 workbook event assembly (JETFDS/R03, behind SOR) Energy sum of the reference per-segment SELs vs the B-1 event total, dB74.73 dB74.733 dB±0.01 dB0.003 dB30 %
CumpleSAE ARP 5534 low branch at the split (Eq. 7) SAE-Method δ_B just below δ_t = 150 dB vs the printed Eq. 8 value there, dB123.95 dB123.953 dB±0.01 dB0.003 dB30 %
CumpleSAE ARP 5534 high branch at the split (Eq. 8) SAE-Method δ_B just above δ_t = 150 dB vs the printed Eq. 7 value there, dB123.953 dB123.95 dB±0.01 dB-0.003 dB30 %
CumpleEASA ANP database round-trip Interpolated NPD level at a tabulated node vs the published ANP value, dB98.8 dB98.8 dB±1.00e-9 dB0 dB0.0 %
CumpleECAC Doc 29 NPD interpolation Log-linear NPD level at the log-midpoint distance (Eq. 4-4), dB97 dB97 dB±1.00e-9 dB0 dB0.0 %
CumpleSAE ARP 5534 pure-tone coefficient (Eqs. 1-6) Mid-band α at 1 kHz, 25 °C, 70 % RH, 101.325 kPa, dB/m0.006187 dB/m0.006187 dB/m±1.00e-9 dB/m0 dB/m0.0 %
CumpleICAO Annex 16 Vol. I App. 2 Table A2-3 Perceived noisiness at SPL(b), 1 kHz band, in noys11±0.0000010000.0 %
CumpleICAO Doc 9501 ETM Vol. I Table 3-7 Tone correction of the turbofan example, dB22±0.0000010000.0 %
CumpleICAO Doc 9501 ETM Vol. I Table 4-4 Integrated-method reference EPNL, EPNdB92.619 EPNdB92.619 EPNdB±0.01 EPNdB0.00000142 EPNdB0.0 %
CumpleIEC 61265:1995 Table 1 Directional-response tolerance at 4 kHz / 90°, dB2 dB2 dB±1.00e-9 dB0 dB0.0 %
CumpleECAC Doc 29 Appendix B take-off ground roll Equivalent take-off distance of reference case 6 (Eq. B-15/B-16), ft4897.5 ft4897.5 ft±0.1 ft0.036 ft72 %
CumpleECAC Doc 29 Appendix B approach thrust Corrected net thrust at the top of reference case 2A (Eq. B-40/B-48), lb533.1 lb533.1 lb±0.1 lb0.035 lb70 %
CumpleECAC Doc 29 Appendix D Table D-2 Spectral classes 103 and 205 corrected back to the source (Eq. D-1), cells48/48 cells of Table D-2 at source48/48 cells of Table D-2 at source±000.0 %
CumpleECAC Doc 29 Appendix D Table D-3a SAE AIR-1845 attenuation of Table D-1 over the ten NPD distances, cells240/240 cells of Table D-3a240/240 cells of Table D-3a±000.0 %
CumpleECAC Doc 29 Appendix D Table D-3b SAE ARP 866A attenuation at 10 °C, 80 % over the NPD distances, cells240/240 cells of Table D-3b within half a unit of the last digit plus 7 ppm240/240 cells of Table D-3b±000.0 %
CumpleECAC Doc 29 Appendix D Table D-3c SAE ARP 5534 attenuation at 10 °C, 80 %, 101.325 kPa over the NPD distances, cells240/240 cells of Table D-3c240/240 cells of Table D-3c±000.0 %
CumpleECAC Doc 29 Appendix D Table D-4 A-weighted levels and increment ΔL with SAE ARP 5534 (Eq. D-4), cells60/60 cells of Table D-460/60 cells of Table D-4±000.0 %
CumpleECAC Doc 29 Appendix D Table D-5 A-weighted levels and increment ΔL with SAE ARP 866A (Eq. D-4), cells60/60 cells of Table D-560/60 cells of Table D-5±000.0 %
CumpleECAC Doc 29 Appendix D Table D-6b JETW SEL NPD data revised end to end with SAE ARP 5534, cells70/70 cells of Table D-6b70/70 cells of Table D-6b±000.0 %
CumpleECAC Doc 29 Appendix D Table D-6c JETW SEL NPD data revised end to end with SAE ARP 866A, cells60/60 cells of Table D-6c outside its misprinted last row60/60 cells of Table D-6c±000.0 %
CumpleISO 3891:1978 Annex C Tone correction worked example: background and excess F in 22 bands, fields44/44 printed background and excess values44/44 printed background and excess values±000.0 %
CumpleISO 3891:1978 Annex A Table 10 SAE ARP 866A coefficient at 80 % from -10 °C to 40 °C, 50 Hz to 10 kHz, cells264/264 cells of Table 10264/264 cells of Table 10±000.0 %
Rotorcraft noise (ECAC Doc 32 / NORAH2) 14/14
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleECAC Doc 32 atmospheric attenuation (Table 4) ΔLa over a 1 km excess path at 1 kHz vs the NORAH2 guidance Table 4, dB6.3 dB6.186 dB±0.2 dB-0.114 dB57 %
CumpleECAC Doc 32 spherical spreading ΔLs at ten times the 60 m hemisphere reference distance (Eq. 24), dB-20 dB-20 dB±1.00e-9 dB0 dB0.0 %
CumpleECAC Doc 32 ground effect (rigid limit) ΔLg over a rigid surface at grazing incidence tends to +6 dB (Eq. 29), dB6 dB6 dB±1 dB0.002 dB0.2 %
CumpleECAC Doc 32 propagation chain (NORAH2 prototype) LA of a single-hemisphere emission vs the NORAH2 prototype single-event history (R22 approach, 223.66 m slant), dB(A)55.87 dBA55.886 dBA±0.1 dBA0.016 dBA16 %
CumpleNORAH2 guidance §A.3.5 ring derivation (constant φ) Hemisphere rim bin (φ, θ) = (+90°, 150°) vs the ring level at +150°, dB75 dB75 dB±1.00e-9 dB0 dB0.0 %
CumpleNORAH2 guidance §A.3.5 Table 3 (Approach 3 HOGE offset) Out-of-ground-hover minus in-ground-hover level of a derived bin, dB12 dB12 dB±1.00e-9 dB0 dB0.0 %
CumpleECAC Doc 32 flight-condition interpolation nombra además NORAH2 guidance Eq. 8 Distance-scaled triangle blend of three uniform hemispheres, hand-checked, dB97.0367 dB97.0364 dB±0.001 dB-0.0003 dB30 %
CumpleECAC Doc 32 flight-path kinematics (Eq. 17) Airspeed of a straight climbing track, 40 m/s ground speed at a 5° path angle, m/s40.15279 m/s40.15279 m/s±0.0001 m/s0.00001 m/s10 %
CumpleECAC Doc 32 retarded time (Eq. 22) Recorded-time delay at 100 m slant distance, r/c with c = 346.1 m/s, s0.288934 s0.288934 s±0.00001 s-1.66e-7 s1.7 %
CumpleECAC Doc 32 single event (Eq. 27) SEL − LASmax of a constant-speed level flyover, 10·lg(π·d/V) closed form, dB7.982 dB7.942 dB±0.1 dB-0.04 dB40 %
CumpleNORAH2 guidance mean ground plane (Eq. 36-40) Intercept of the plane fitted to a symmetric 20 m roofline, hand-checked, m10 m10 m±0.00000100 m0 m0.0 %
CumpleNORAH2 guidance mean flow resistivity (Eq. 41) Log-average of equal 1e4 and 1e6 Pa·s/m2 halves, hand-checked, Pa·s/m2100000 Pa·s/m²100000 Pa·s/m²±0.00100 Pa·s/m²0 Pa·s/m²0.0 %
CumpleNORAH2 guidance diffraction at grazing (Eq. 42) Pure diffraction with the edge on the line of sight, 10·lg 3, dB4.7712 dB4.7712 dB±0.0001 dB0.0000125 dB13 %
CumpleNORAH2 guidance screening path difference (§A.4.5) Rubber-band delta over a 40 m hill, hand-checked geometry, m4.2848 m4.2848 m±1.00e-9 m0 m0.0 %
CNOSSOS-EU road source (Directive 2002/49/EC Annex II) 6/6
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleCIRCABC CNOSSOS-EU road emission test set Line power of the 60 committed cases of the 4 875-case published test set, 8 octave bands each, dB re 1 pW/m<= 0.01 dB on 480 published band levels (60 cases)0.005 dB±0.01 dB0.005 dB50 %
CumpleDirective (EU) 2021/1226 Annex pt (19)(a), Table F-1 Rolling and propulsion coefficients, 5 categories x 4 rows x 8 bands160 coefficients identical160/160 coefficients±000.0 %
CumpleDirective (EU) 2021/1226 Annex pt (19)(b), Table F-4 Road-surface coefficients, 15 surfaces x 5 categories x (8 alpha + beta)675 stored coefficients identical675/675 stored coefficients±000.0 %
CumpleDirective (EU) 2015/996 Appendix F, Tables F-2 and F-3 Studded-tyre and junction coefficients, unchanged since 201536 coefficients identical36/36 coefficients±000.0 %
CumpleDirective (EU) 2015/996 Annex II 2.2.4 / 2.2.11 Sound power at v_ref = 70 km/h under reference conditions, dB re 1 pWexactly A_R,i,m and A_P,i,m0 dB±0 dB0 dB0.0 %
CumpleDirective (EU) 2021/1226 Annex pt (8)(b) Octave-band A-weighting AWC_f,i prescribed by 2.5.5, dB8 values identical8/8 values±000.0 %
Wind-turbine noise (IEC 61400-11) 3/3
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleIEC 61400-11:2012 Formula 30 Critical bandwidth about a 500 Hz tone, Hz117.255 Hz117.255 Hz±0.00000100 Hz0 Hz0.0 %
CumpleIEC 61400-11:2012 Formula 26 Apparent sound power level of a single band, dB re 1 pW148.5139 dB148.5139 dB±0.0001 dB0 dB0.0 %
CumpleIEC 61400-11:2012 Formulae 31-34 Tonal audibility of a synthetic clean tone, dB16.38 dB16.38 dB±0.06 dB-0.001 dB1.7 %
Road-surface influence on traffic noise (ISO 11819-1) 7/7
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleISO 11819-1:1997 Table 1 Reference speeds and weighting factors, 3 road speed categories x 3 vehicle categories x 218/18 printed cells18/18 printed cells±000.0 %
CumpleISO 11819-1:1997 Table 2 Expected random errors: standard deviation of individual vehicles and 95 % confidence interval around L_veh, 3 vehicle categories, dBs 1 = 1.5 dB; s 2a = 2 dB; s 2b = 2 dB; CI 1 = 0.3 dB; CI 2a = 0.7 dB; CI 2b = 0.7 dBs 1 = 1.5 dB; s 2a = 2 dB; s 2b = 2 dB; CI 1 = 0.3 dB; CI 2a = 0.7 dB; CI 2b = 0.7 dB±0 dB0 dB0.0 %
CumpleISO 11819-1:1997 Annex E, regression data L_veh of cars, dual-axle and multi-axle heavy vehicles at 80 and 70 km/h, from pass-bys on the printed regression lines, reported to one decimal, dB1 = 78.5 dB; 2a = 81.1 dB; 2b = 83.8 dB1 = 78.5 dB; 2a = 81.1 dB; 2b = 83.8 dB±0 dB0 dB0.0 %
CumpleISO 11819-1:1997 9.2, 9.5 and Annex E SPBI not corrected for temperature, from pass-bys on the printed regression lines through the L_veh of 9.2 to one decimal, dB79.9 dB79.946 dB±0.05 dB0.046 dB92 %
CumpleISO 11819-1:1997 9.5 and Annex E SPBI corrected for temperature, from the corrected L_veh Annex E prints, dB80.1 dB80.121 dB±0.05 dB0.021 dB42 %
CumpleISO 11819-1:1997 clause 10 and Annex E Difference of the temperature-corrected SPBI from the 77.3 dB of the reference surface, dB2.8 dB2.821 dB±0.05 dB0.021 dB42 %
CumpleISO 11819-1:1997 10.2 and Annex D L_veh of the normalized reference surface for the medium speed range, the average of the seven surfaces printed, to one decimal, dB1 = 76.4 dB; 2a = 81 dB; 2b = 84 dB1 = 76.4 dB; 2a = 81 dB; 2b = 84 dB±0 dB0 dB0.0 %
Wind turbine sound at a receptor (IEC TS 61400-11-2) 23/23
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleIEC TS 61400-11-2:2024 Table K.1 Wind speed at 10 m from 120 m, every cell156/156 cells of Table K.1156/156 cells of Table K.1±000.0 %
CumpleIEC TS 61400-11-2:2024 Table K.2 Shear exponent from 10 m and 120 m, every cell and every blank195/195 cells of Table K.2, the blanks outside -0.1 to 0.5195/195 cells of Table K.2, the blanks outside -0.1 to 0.5±000.0 %
CumpleIEC TS 61400-11-2:2024 Table K.3 Roughness length of four terrains, mWater, snow or sand surfaces = 0.0001 m; Open, flat land, mown grass, bare soil = 0.01 m; Farmland with some vegetation = 0.05 m; Suburbs, towns, forests, many trees and bushes = 0.3 mWater, snow or sand surfaces = 0.0001 m; Open, flat land, mown grass, bare soil = 0.01 m; Farmland with some vegetation = 0.05 m; Suburbs, towns, forests, many trees and bushes = 0.3 m±0 m0 m0.0 %
CumpleIEC TS 61400-11-2:2024 9.3.2.1 resuelto con IEC 61400-11:2012 Equation (29) Hub-height wind speed brought back to 10 m over z0ref = 0.05 m, m/s6 m/s6 m/s±0.000001 m/s0 m/s0.0 %
CumpleIEC TS 61400-11-2:2024 Equations (1) to (5) Combined uncertainty of an energy-averaged bin of three intervals, dB0.709168 dB0.709168 dB±0.000001 dB0 dB0.0 %
CumpleIEC TS 61400-11-2:2024 Equations (6) and (7) Turbine level and its uncertainty 5 dB over the background, dB0 dBworst deviation 0.00e+00 dB±0.000001 dB0 dB0.0 %
CumpleIEC TS 61400-11-2:2024 11.7 Turbine level of a total 2 dB over the background: the suggested 3 dB correction, dB39 dB39 dB±0.000001 dB0 dB0.0 %
CumpleIEC TS 61400-11-2:2024 Table 3 Type B uncertainty examples: typical range and standard uncertainty, dB4/4 components of Table 34/4 components of Table 3±000.0 %
CumpleIEC TS 61400-11-2:2024 Equations (10) and (11) Combined uncertainty of a prediction over three turbines, dB2.418549 dB2.418549 dB±0.000001 dB0 dB0.0 %
CumpleIEC TS 61400-11-2:2024 9.3.2.3 Sound relevant turbines of six at 35, 33, 32, 25, 20 and 18 dBthe three loudest (the other three drop the total by 0.3 dB)1, 2, 3±000.0 %
CumpleIEC TS 61400-11-2:2024 Table C.1 Impedance classes A to H: flow resistivity, Nordtest classes and ground8/8 classes of Table C.18/8 classes of Table C.1±000.0 %
CumpleIEC TS 61400-11-2:2024 Tables C.2, C.3 and C.5 Ground correction, air attenuation, facade insulation and the Swedish curve65/65 cells of Tables C.2, C.3 and C.565/65 cells of Tables C.2, C.3 and C.5±000.0 %
CumpleIEC TS 61400-11-2:2024 Table C.2 resuelto con ISO 9613-1 Air attenuation at 125 Hz to 200 Hz: ISO 9613-1 at 10 degrees C and 70 % at the nominal band centres3/3 cells of Table C.2 to 0.01 dB/km3/3 cells of Table C.2 to 0.01 dB/km±000.0 %
CumpleIEC TS 61400-11-2:2024 Table C.2 resuelto con ISO 9613-1 and BEK nr. 135:2019 Table 1.4 Air attenuation at 50 Hz to 100 Hz under ISO 9613-1 at 70 %, dB/km0.01, 0.01, 0.02, 0.02 dB/km: the cells are the Danish order's, at 80 %50 Hz = 0.01 dB/km; 63 Hz = 0.01 dB/km; 80 Hz = 0.02 dB/km; 100 Hz = 0.02 dB/km±0 dB/km0 dB/km0.0 %
CumpleIEC TS 61400-11-2:2024 Table C.2 with BEK nr. 135:2019 Table 1.4 Air attenuation at 25 Hz to 100 Hz within 0.01 dB/km of ISO 9613-1 at 80 %7/7 cells of Table C.2, the Danish order's cells7/7 cells of Table C.2, the Danish order's cells±000.0 %
CumpleIEC TS 61400-11-2:2024 Table C.4 A-weighting row, 10 Hz to 200 Hz, against IEC 61672-1:2013 Table 314/14 bands of Table C.414/14 bands of Table C.4±000.0 %
CumpleIEC TS 61400-11-2:2024 Equation (C.1) Indoor A-weighted 63 Hz level of 95 dB at 500 m from a 100 m hub, dB-8.705823 dB-8.705823 dB±0.000001 dB0 dB0.0 %
CumpleIEC TS 61400-11-2:2024 Equation (J.1) Emergence of a 44.5 dB ambient over 41 dB, dB3.5 dB3.5 dB±0.000001 dB0 dB0.0 %
CumpleIEC TS 61400-11-2:2024 Figure A.1 Amplitude modulation adjustment at the grid points the curve meets6/6 points of Figure A.16/6 points of Figure A.1±000.0 %
CumpleIEC TS 61400-11-2:2024 Table A.1 and A.2 Tonal adjustment at each limit of the mean audibility, both step sizes10/10 limits of Table A.1 and A.210/10 limits of Table A.1 and A.2±000.0 %
CumpleIEC TS 61400-11-2:2024 A.1 Rating level with the most severe adjustment alone, dB44 dB44 dB±0.000001 dB0 dB0.0 %
CumpleIEC TS 61400-11-2:2024 Table 7 Upper tone search frequency, the four rows printed at their own atmosphere16/16 cells of Table 716/16 cells of Table 7±000.0 %
CumpleIEC TS 61400-11-2:2024 Table 7, fourth row The row printed at 10 degrees C and 80 %, reproduced at -10 degrees C4/4 cells of the fourth row at -10 degrees C4/4 cells of the fourth row at -10 degrees C±000.0 %
Wind turbine amplitude modulation (IEC TS 61400-11-2 clause 13) 9/9
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleIOA AMWG reference code v1.4, sample Sample-50_200Hz Prominence, fundamental modulation frequency and 10 s AM of band 140.43, 0.70 Hz, 5.36 dB40.43, 0.70 Hz, 5.36 dB±000.0 %
CumpleIOA AMWG reference code v1.4, sample Sample-100_400Hz Prominence, fundamental modulation frequency and 10 s AM of band 244.64, 0.70 Hz, 8.38 dB44.64, 0.70 Hz, 8.38 dB±000.0 %
CumpleIOA AMWG reference code v1.4, sample Sample-200_800Hz Prominence, fundamental modulation frequency and 10 s AM of band 352.31, 0.70 Hz, 7.66 dB52.31, 0.70 Hz, 7.66 dB±000.0 %
CumpleIOA AMWG sample band filtering workbook A-weighted sums of seven one-third-octave bands, rounded to 0.1 dB303/303 sums of the three bands, one per 100 ms sample303/303 sums of the three bands, one per 100 ms sample±000.0 %
CumpleIOA AMWG reference code v1.4, synthetic 10 s blocks Status, prominence, fundamental and depth of nine designed blocks9/9 blocks9/9 blocks±000.0 %
CumpleIOA AMWG reference code v1.4, 10 min rating 90th percentile of 36 valid 10 s blocks, dB10.43974 dB10.43974 dB±0.000001 dB0 dB0.0 %
CumpleIOA AMWG reference code v1.4 resuelto con IEC TS 61400-11-2:2024 13.6.2.2 A period of exactly 30 valid blocks is rated, dB9.364678 dB9.364678 dB±0.000001 dB0 dB0.0 %
CumpleIEC TS 61400-11-2:2024 13.6.3 (the IOA code discards the period) A period of 29 valid blocks is rated 0 dB and kept, dB29 valid blocks, rated 0 dB (the AMWG report discards it)29 valid blocks, rated 0 dB±000.0 %
CumpleIOA AMWG reference code v1.4 resuelto con IEC TS 61400-11-2:2024 13.6.3 Mean and mode fundamental of a rated period, 20 of 36 valid blocks at 0.7 Hzmean 0.7778 Hz, mode 0.70 Hzmean 0.7778 Hz, mode 0.70 Hz±0.000000001 Hz0 Hz0.0 %
Porous & multilayer absorbers (Mechel / Bies / Cox & D'Antonio) 20/20
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleBies:5e App. D Table D.1 corroborado por Mechel:2e G.11 (2) Delany-Bazley normalised Zc at X = 0.1, real part1.32411.3241±1.00e-900.0 %
CumpleBies:5e App. D Table D.1 corroborado por Mechel:2e G.11 (2) Delany-Bazley normalised Zc at X = 0.1, imaginary part-0.4694-0.4694±1.00e-900.0 %
CumpleMiki:1990 Eqs. (30)-(34) Miki normalised wavenumber at f/sigma = 0.1, real part1.45231.4523±1.00e-900.0 %
CumpleJohnson et al.:1987 corroborado por Cox & D'Antonio:3e Eq. (6.19) JCA static viscous limit j w rho_e -> sigma, Pa s/m220000 Pa·s/m²20000 Pa·s/m²±0.01%1.31e-9 Pa·s/m²0.0 %
CumpleMechel:2e Sect. D.3 Eq. (1) Hard-backed layer: TMM vs -j Zc cot(kd), max rel deviation00±1.00e-1000.0 %
CumpleLossless-layer limit (Mechel 2e Sect. D.3-D.4) Air cavity over a rigid wall at lambda/4: alpha00±1.00e-1200.0 %
CumpleMechel:2e Sect. D.5 Maximum statistical absorption of a locally reacting plane0.9510.951±0.0010.00022222 %
CumpleCox & D'Antonio:3e Eq. (7.9) Membrane resonance 60/sqrt(m d), m = 5 kg/m2, d = 5 cm, Hz120 Hz119.85 Hz±2%-0.15 Hz6.3 %
CumpleMaa:1998 Fig. 5 corroborado por Cox & D'Antonio:3e Fig. 7.28 Microperforated panel (d=t=0.2 mm, b=2.5 mm, D=6 cm): peak alpha0.950.956±0.050.00612 %
CumpleMaa:1998 Eqs. (5a)/(10) MPP peak absorption vs 4r/(1+r)^2 with Maa's printed resistance4r/(1+r)^2 = 0.9490.956±0.020.00735 %
CumpleAllard & Atalla:2e Sect. 11.3.4 (Eq. 6.90), Table 6.1 glass wool Zwikker-Kosten decoupling frequency Fd, Hz43.27 Hz43.271 Hz±0.005 Hz0.001 Hz20 %
CumpleAllard & Atalla:2e Eq. (11.55), printed p. 253 (prose limit) Limp effective density at DC = apparent total density rho_t, kg/m331.1809 kg/m³31.1809 kg/m³±0.01%-1.72e-11 kg/m³0.0 %
CumpleAllard & Atalla:2e Eq. (11.55), printed p. 253 (prose limit) Heavy frame recovers the rigid-frame Zc (relative deviation)03.98e-11±0.000013.98e-110.0 %
CumpleAllard & Atalla:2e printed p. 254 nombra además Doutres et al.:2007 Limp-frame bulk-modulus limit for air, kPa20 kPa20.27 kPa±0.3 kPa0.265 kPa88 %
CumpleAllard & Atalla:2e Eq. (6.110), Table 6.1 glass wool Frame lambda/4 resonance of a 10 cm layer, Hz459.9 Hz459.93 Hz±0.05 Hz0.033 Hz66 %
CumpleAllard & Atalla:2e Sect. 6.5.4 (Biot model output), pp. 124-125 Airborne compressional branch changes root at 495 Hz495 Hz495.9 Hz±1%0.9 Hz18 %
CumpleAllard & Atalla:2e Sect. 6.5.4 (Biot model output), pp. 124-125 Frame-borne velocity ratio Re(mu_b) at 1500 Hz (see ERRATA)0.820.811±2%-0.00955 %
CumpleAllard & Atalla:2e Sect. 6.6.3 (Biot model output), p. 129 Surface-impedance peak of a 5.6 cm layer, Hz860 Hz863.5 Hz±2%3.5 Hz20 %
CumpleAllard & Atalla:2e Sect. 11.3.4 (rigid-frame limit) Stiff, heavy frame recovers the JCA layer (max rel deviation)00.0000000034±0.00000010.00000000343.4 %
CumpleAllard & Atalla:2e Eq. (6.107) vs Sect. 11.5 assembly Two independent derivations of Zs (max rel deviation)00±0.000000000100.0 %
Slow-sound perfect absorbers (Jimenez et al. Appl. Sci. 2017) 3/3
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleJimenez et al. Appl. Sci.:2017 Eq. (9) Critical coupling: alpha at the design frequency (300 Hz, normal)11±0.00100.0 %
CumplePoiseuille limit (Stinson 1991) Slit: j w rho_s -> 12 eta / h^2 as w -> 0 (h = 1.2 mm)153.3 Pa·s/m²153.3 Pa·s/m²±0.1%6.41e-7 Pa·s/m²0.0 %
CumplePoiseuille limit (Stinson 1991) Square duct: j w rho -> 28.454 eta / w^2 as w -> 0 (w = 3 mm)58.2 Pa·s/m²58.2 Pa·s/m²±0.2%0.000409 Pa·s/m²0.4 %
Program loudness (ITU-R BS.1770 / EBU R 128) 8/8
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleITU-R BS.1770-5 Annex 1 997 Hz sine at 0 dB FS on the left channel, LKFS-3.01 LKFS-3.01 LKFS±0.01 LKFS-0.000280 LKFS2.8 %
CumpleEBU Tech 3341:2023 Table 1 case 1 Integrated loudness of the -23 dBFS stereo sine, LUFS-23 LUFS-22.99 LUFS±0.1 LUFS0.007 LUFS7.0 %
CumpleEBU Tech 3341:2023 Table 1 case 5 Gated integrated loudness of the -26/-20/-26 dBFS steps, LUFS-23 LUFS-22.98 LUFS±0.1 LUFS0.021 LUFS21 %
CumpleEBU Tech 3341:2023 Table 1 case 6 Integrated loudness of the 5.0-channel sine (Table 3 weights), LUFS-23 LUFS-23.02 LUFS±0.1 LUFS-0.016 LUFS16 %
CumpleEBU Tech 3341:2023 Table 1 case 15 True-peak level of the fs/4 sine at 0.5 FFS, dBTP-6 dBTP (+0.2/-0.4 dB)-6.02 dBTP[-0.4, 0.2] dBTP-0.015 dBTP28 %
CumpleEBU Tech 3341:2023 Table 1 case 19 True-peak level of the fs/4 sine at 1.41 FFS, dBTP3 dBTP (+0.2/-0.4 dB)3 dBTP[-0.4, 0.2] dBTP0.001 dBTP34 %
CumpleEBU Tech 3342:2023 Table 1 case 1 Loudness range of the -20/-30 dBFS tone steps, LU10 LU10 LU±1 LU-3.17e-10 LU0.0 %
CumpleEBU Tech 3342:2023 Table 1 case 3 Loudness range of the -40/-20 dBFS tone steps, LU20 LU20 LU±1 LU2.39e-11 LU0.0 %
Quasi-peak meter (ITU-R BS.468-4) 12/12
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleITU-R BS.468-4 Table 2 Single 1 ms 5 kHz burst (5 periods), % of the steady reading13.5 to 21.4 %16.85 %-+1.928 dB-
CumpleITU-R BS.468-4 Table 2 Single 2 ms 5 kHz burst (10 periods), % of the steady reading22.4 to 31.6 %26.72 %-+1.458 dB-
CumpleITU-R BS.468-4 Table 2 Single 5 ms 5 kHz burst (25 periods), % of the steady reading34 to 46 %40.29 %-+1.151 dB-
CumpleITU-R BS.468-4 Table 2 Single 10 ms 5 kHz burst (50 periods), % of the steady reading41 to 55 %47.73 %-+1.231 dB-
CumpleITU-R BS.468-4 Table 2 Single 20 ms 5 kHz burst (100 periods), % of the steady reading44 to 60 %52.58 %-+1.146 dB-
CumpleITU-R BS.468-4 Table 2 Single 50 ms 5 kHz burst (250 periods), % of the steady reading50 to 68 %58.78 %-+1.266 dB-
CumpleITU-R BS.468-4 Table 2 Single 100 ms 5 kHz burst (500 periods), % of the steady reading58 to 78 %66.98 %-+1.251 dB-
CumpleITU-R BS.468-4 Table 2 Single 200 ms 5 kHz burst (1000 periods), % of the steady reading68 to 92 %80.41 %-+1.170 dB-
CumpleITU-R BS.468-4 Table 3 5 ms 5 kHz bursts at 2 per second, % of the steady reading43 to 53 %48.11 %-+0.840 dB-
CumpleITU-R BS.468-4 Table 3 5 ms 5 kHz bursts at 10 per second, % of the steady reading72 to 82 %75.70 %-+0.435 dB-
CumpleITU-R BS.468-4 Table 3 5 ms 5 kHz bursts at 100 per second, % of the steady reading94 to 100 %97.11 %-+0.255 dB-
CumpleITU-R BS.468-4 clause 2.6 Steady 1 kHz sine at 0.775 V r.m.s., dBqps0 dBqps0 dBqps±0.000001 dBqps0 dBqps0.0 %
Broadcast Wave metadata (EBU Tech 3285 / ITU-R BS.2088) 14/14
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleEBU Tech 3285:2011 (2.3) bext fixed part: every field at its cumulative offset, 602 bytes15 fields byte-identical at offsets 0..422, fixed part 602 B15/15 byte-identical, 602 B + CodingHistory---
CumpleEBU Tech 3285:2011 (2.3) bext round trip: written metadata returns identically through the reader13 fields identical, CodingHistory extended13/13 identical, history extended---
CumpleEBU Tech 3285:2011 (2.4) Loudness int16 = 100 x value, ties away from zero: negative examples-22.644 -> F728h (-2264), -22.645 -> F727h (-2265), -22.646 -> F727h (-2265)F728h (-2264), F727h (-2265), F727h (-2265)---
CumpleEBU Tech 3285:2011 (2.4) Loudness int16 = 100 x value, ties away from zero: positive examples12.764 -> 04FCh (1276), 12.765 -> 04FDh (1277), 12.766 -> 04FDh (1277)04FCh (1276), 04FDh (1277), 04FDh (1277)---
CumpleEBU Tech 3285:2011 (2.4) Unused loudness parameters: 7FFFh on disk, None through the reader7FFFh x 5 on disk; None x 5 reread7FFFh, 7FFFh, 7FFFh, 7FFFh, 7FFFh; None x 5---
CumpleEBU Tech 3285:2011 (2.4) Out-of-range loudness clamps to 7FFEh/8000h, never the 7FFFh sentinel327.9 -> 7FFEh (not the sentinel); -inf -> 8000h7FFEh; 8000h---
CumpleEBU Tech 3285:2011 (2.3) TimeReference: 64-bit first-sample count split low/high at 338/342low 370632704 @ 338, high 1 @ 342 (13:30:00 at 96 kHz = 4665600000 samples)low 370632704, high 1 -> 4665600000 samples, reread equal---
CumpleEBU Tech 3285:2011 (2.3): CodingHistory row leído vía EBU R 98 Appendix 1 Appended row is A=PCM,F=48000,W=16,M=stereo,T=... + CR/LF (Example 1)A=PCM,F=48000,W=16,M=stereo,T=(free text, no commas) + CR/LFA=PCM,F=48000,W=16,M=stereo,T=(free text) + CR/LF---
CumpleEBU Tech 3285:2011 (2.3): CodingHistory row leído vía EBU R 98 Appendix 1 Prior coding row preserved verbatim, new row added beneath it2 rows: Example 2's A/D row intact above, the writer's beneath2 rows, prior row byte-identical---
CumpleEBU Tech 3285:2011 (1.1/2.3) UMID exists from v1 (64 of the 254 reserved bytes): v0 refused, v1 at 348v0+UMID refused; v1: Version=0001h, UMID verbatim at 348v0 refused; v1: Version=0001h, UMID verbatim---
CumpleEBU Tech 3285:2011 (1.1/2.3) Loudness exists from v2 (10 of the 190 reserved bytes): v1 refused/zeroedv1+loudness refused; v1 writes 10 zero bytes, reads None; v2 carriesv1 refused; bytes zeroed, None reread, v2 carries---
CumpleITU-R BS.2088-2 Annex 1 (4.1/4.2) ds64 first after WAVE: bw64Size/dataSize u64 pairs at 0/8, table at 24ds64 first, >= 28 B: riffSize 24883200072, dataSize 24883200000, tableLength 0ds64 @ 12, 28 B: riffSize 24883200072, dataSize 24883200000, tableLength 0---
CumpleITU-R BS.2088-2 Annex 1 (3.2/2.4) Promoted header: FFFFFFFFh sentinel in the outer and data size fieldsouter size = data size = FFFFFFFFh, form type WAVEouter FFFFFFFFh, data FFFFFFFFh, WAVE---
CumpleITU-R BS.2088-2 Annex 1 (2.4/3.1) Reader resolves the data size through ds64; BW64 and RF64 fourccs alikeRF64: 48 frames, BW64: 48 frames (via ds64 dataSize = 96 B)RF64 read as RF64, 48 frames; BW64 read as BW64, 48 frames---
2D FDTD wave simulation (Attenborough & Van Renterghem 2021, Ch. 4) 4/4
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleRigid rectangular box eigenfrequency Mode (1,1) of a 1.0 x 0.7 m rigid box, f = (c/2)*sqrt(1/lx^2 + 1/ly^2), Hz299.06 Hz298.91 Hz±1.5 Hz-0.153 Hz10 %
CumpleFree-field pulse arrival delay Probe-to-probe delay of a pulse over 0.6 m of air, (r2 - r1)/c, ms1.749 ms1.756 ms±0.05 ms0.007 ms14 %
Cumple2D Kirchhoff-Helmholtz NTFF: monopole directivity Far-field pattern ripple of an enclosed line source, dB0 dB0.044 dB±0.2 dB0.044 dB22 %
Cumple2D Kirchhoff-Helmholtz NTFF: monopole level NTFF far-field level vs the 2D Green function A sqrt(2/(pi k)), dB0 dB0.106 dB±0.3 dB0.106 dB35 %
Swept-sine distortion & phase utilities (Farina / Novak) 7/7
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleFarina:2000 corroborado por Novak et al.:2015 (Chebyshev identity) 3rd-harmonic response H3 magnitude of a cubic polynomial, re a3/40.050.05001±0.00050.000012.0 %
CumpleNovak et al.:2015 JAES 63(10), Eqs. 18/49 Synchronized-sweep phase of H3 (Chebyshev: -sin(3wt)), rad3.1416 rad3.1411 rad±0.005 rad-0.0005 rad10 %
CumpleFarina:2000 AES 108th Conv. (THD from one sweep) THD(1 kHz) of the polynomial vs sqrt((a2/2)^2+(a3/4)^2)/(1+3a3/4)0.061490.06159±0.0010.000110 %
CumpleFarina:2000 (distortion rejected from the linear IR) THD floor of a purely linear path (gain 0.5), max over 100-2000 Hz00.00033±0.0010.0003333 %
CumpleBendat & Piersol, Random Data:4e Sec. 13.1.4 (Hilbert relation) Min-phase reconstruction of a strictly min-phase biquad, max err, rad0 rad0 rad±1.00e-9 rad0 rad0.0 %
CumpleFirst-order allpass closed form (1-a^2)/(1+2a cos w+a^2) Group delay of the a = 0.5 allpass at w = pi/2, samples0.60.6±0.000017.53e-80.8 %
CumpleAll-pass decomposition of a pure latency (B&P Sec. 13.1.4) Excess group delay of a biquad delayed 7.25 samples, samples7.257.25±0.0000010000.0 %
Spherical ground & barriers (Attenborough / Salomons / Bies) 7/7
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleAttenborough:2e Eq. (2.40c) (spherical Q, hard-ground limit) abs(Q) as Z grows large (Rp -> 1 so (1 - Rp) -> 0 and Q -> 1)11±0.000001-2.82e-110.0 %
CumpleSalomons:2001 Sec. 3.4 (two-ray field over a rigid ground) dL enhancement at small path difference (constructive, +6 dB)6.0206 dB6.0205 dB±0.1 dB-0.0001 dB0.1 %
CumpleSalomons:2001 Eq. (D.59) (plane-wave Rp, grazing incidence) Re(Rp) at grazing (hs, hr -> 0, cos(theta) -> 0 so Rp -> -1)-1-1±0.0010.00004804.8 %
CumpleSalomons:2001 Fig. D.3 (grassland ground dip, sigma = 200 kPa s/m2) Minimum dL for hs = hr = 2 m, r = 100 m (dip near 395 Hz), dB-12.7 dB-12.72 dB±0.3 dB-0.022 dB7.3 %
CumpleBies:5e Eq. (5.138) (Kurze-Anderson, N -> 0) Barrier attenuation at the shadow boundary N = 05 dB5 dB±1.00e-9 dB0 dB0.0 %
CumpleBies:5e Eq. (5.138) (Kurze-Anderson, large-N slope) Delta(N=10) - Delta(N=1) vs the 10 lg(10) = 10 dB decade growth10 dB9.8845 dB±0.5 dB-0.1155 dB23 %
CumpleAttenborough:2e Eqs. (9.19)-(9.20) (rigid half-plane, shadow boundary) Exact thin-screen insertion loss at grazing (field halved, 6 dB)6.0206 dB5.7932 dB±0.6 dB-0.2274 dB38 %
Road traffic noise reducing devices (EN 1793) 20/20
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleEN 1793-3:1997 Table 1 (normalised traffic noise spectrum) the eighteen printed levels, 100 Hz to 5 kHz100 Hz = -20 dB; 1 kHz = -8 dB; 5 kHz = -18 dB100 Hz = -20 dB; 1 kHz = -8 dB; 5 kHz = -18 dB±0 dB0 dB0.0 %
CumpleEN 1793-1:2012 Clause 5 (DLalpha, constant absorption) a device absorbing 0.50 in every band rates -10 lg(1 - 0.50)3.0103 dB3.0103 dB±0.0001 dB-4.34e-8 dB0.0 %
CumpleEN 1793-1:2012 Clause 5 (DLalpha, the 0.99 ratio limit) a perfect absorber is capped at -10 lg(1 - 0.99) = 20 dB20 dB20 dB±1.00e-9 dB0 dB0.0 %
CumpleEN 1793-1:2012 Table A.1 (categories of absorptive performance) the four boundaries A2/A3/A4/A5 read off the reported integer4 dB -> A2, 8 dB -> A3, 12 dB -> A4, 16 dB -> A54 dB -> A2, 8 dB -> A3, 12 dB -> A4, 16 dB -> A5-0-
CumpleEN 1793-2:2012 Clause 5.2 (DLR, constant sound reduction index) a wall with R = 32 dB in every band rates 32 dB32 dB32 dB±1.00e-9 dB0 dB0.0 %
CumpleEN 1793-2:2012 Clause 5.2 (DLR, spectrum weighting) one 10 dB band costs more at the 1 kHz peak than at the 100 Hz endDLR(weak at 1 kHz) < DLR(weak at 100 Hz)18.14 dB < 29.73 dB--11.60 dB-
CumpleEN 1793-2:2012 Table A.1 (categories of airborne sound insulation) the three boundaries B2/B3/B4 read off the reported integer15 dB -> B2, 25 dB -> B3, 35 dB -> B415 dB -> B2, 25 dB -> B3, 35 dB -> B4-0-
CumpleEN 1793-5:2016 Table 2 (paths and Cgeo,k of the nine microphones) dS = 1.50 m, dM = 0.25 m and s = 0.40 m give the printed two decimals27/27 printed cells27/27 printed cells±000.0 %
CumpleEN 1793-5:2016 Table 3 (nominal path differences of the position checks) the direct-to-microphone-5 and direct-to-reflected differences, to the millimetre18/18 printed cells18/18 printed cells±000.0 %
CumpleEN 1793-5:2016 5.6.1 NOTE 1 (maximum sampled area, Formula (8)) a 4 m by 4 m sample, the 7.9 ms window and 340 m/s give 1.96 m1.96 m1.9555 m±0.005 m-0.0045 m90 %
CumpleEN 1793-5:2016 5.5.5 and 5.5.1 (the three Adrienne windows) leading edge, flat part and trailing edge of the 7.9 ms, 6.0 ms and 1.3 ms windows7.9 ms lead = 0.5 ms; 7.9 ms flat = 5.18 ms; 7.9 ms trail = 2.22 ms; 6.0 ms lead = 0.5 ms; 6.0 ms flat = 3.85 ms; 6.0 ms trail = 1.65 ms; 1.3 ms lead = 0.5 ms; 1.3 ms flat = 0.56 ms; 1.3 ms trail = 0.24 ms7.9 ms lead = 0.5 ms; 7.9 ms flat = 5.18 ms; 7.9 ms trail = 2.22 ms; 6.0 ms lead = 0.5 ms; 6.0 ms flat = 3.85 ms; 6.0 ms trail = 1.65 ms; 1.3 ms lead = 0.5 ms; 1.3 ms flat = 0.56 ms; 1.3 ms trail = 0.24 ms±0 ms0 ms0.0 %
CumpleEN 1793-5:2016 Formula (1) (a perfect flat reflector) RI = 1 in all eighteen bands once Cgeo,k restores the longer pathmax |RI - 1| = 03.18e-7±0.000001003.18e-732 %
CumpleEN 1793-5:2016 Formulas (1) and (4) (a gain change between configurations) a reflection of amplitude 0.5 rates RI = 0.25 whatever the gain didmax |RI - 0.25| = 01.00e-7±0.00001001.00e-71.0 %
CumpleEN 1793-5:2016 Formula (1) (the one-third octave bands of a comb) two impulses 0.5 ms apart: 0.25 (2 + 2 cos 2 pi f tau) averaged over each band's base-ten edgesmax |RI - comb| = 03.12e-7±0.000001003.12e-731 %
CumpleEN 1793-5:2016 5.5.5 (which window serves which bands) an impulse 6 ms after the reflection moves 100 Hz to 160 Hz and no band from 200 Hzmax |RI - 0.25| from 200 Hz = 00±1.00e-900.0 %
CumpleEN 1793-5:2016 5.5.4 (subtraction to a fiftieth of a sample) a free-field record 0.36 samples late is found 0.36 samples late-0.36-0.36±1.00e-900.0 %
CumpleEN 1793-5:2016 Table B.1 (average of twelve grid positions) the printed average of every band, two of them exact ties at the half18/18 printed averages18/18 printed averages±000.0 %
CumpleEN 1793-5:2016 Table B.2 (DLRI before rounding) and Table B.1 (DLRI = 8 dB) Formula (12) on the printed averages from the 200 Hz band7.68 dB7.6797 dB±0.005 dB-0.0003 dB6.0 %
CumpleEN 1793-5:2016 Table B.2 (expanded uncertainty of DLRI) 1.96 times the high reproducibility of Table A.1, 0.81 dB1.59 dB1.5876 dB±0.005 dB-0.0024 dB48 %
CumpleEN 1793-5:2016 Table B.2 (expanded uncertainty per band) the eleven cells 1.96 times the printed sR gives; the other seven are a hundredth lower, as unrounded sR would give11/11 printed cells11/11 printed cells±000.0 %
Railway noise reducing devices (EN 16272) 3/3
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleEN 16272-3-1:2012 Table 1 (normalised railway noise spectrum) the printed levels at the ends and on the plateau100 Hz = -27 dB; 2 kHz = -9 dB; 5 kHz = -17 dB100 Hz = -27 dB; 2 kHz = -9 dB; 5 kHz = -17 dB±0 dB0 dB0.0 %
CumpleEN 16272-3-1:2012 Clause 6 (DLR on the railway spectrum) a wall with R = 26 dB in every band rates 26 dB26 dB26 dB±1.00e-9 dB0 dB0.0 %
CumpleEN 16272-3-1:2012 Clause 5 (DLalpha on the railway spectrum) the same absorber rates higher against rolling noise than against a roadDLalpha(railway) > DLalpha(road)4.77 dB > 3.95 dB-+0.82 dB-
Panel & aperture sound insulation (Bies / Hopkins / Cremer) 17/17
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleBies:5e Eq. 7.40 (mass law) 6 dB per octave (500 -> 1000 Hz)6.0206 dB6.02 dB±0.01 dB-0.0006 dB6.0 %
CumpleBies:5e Eq. 7.40 (mass law) 6 dB per doubling of mass6.0206 dB6.02 dB±0.01 dB-0.0006 dB6.0 %
CumpleBies:5e Eq. 7.42 (field incidence) One-third-octave correction 5.5 dB5.5 dB5.5 dB±0.001 dB0 dB0.0 %
CumpleHopkins Eq. 2.201 corroborado por Bies Eq. 7.3 Coincidence frequency, 6 mm glass2079 Hz2107.3639 Hz±3%28.3639 Hz45 %
CumpleCremer Table 5.1 Thin-plate point impedance Z = 8 sqrt(B' m'')2529.8221 N·s/m2529.8221 N·s/m±0.00000100 N·s/m0 N·s/m0.0 %
CumpleCremer Table 5.1 Infinite-beam mobility phase -45 deg-45 deg-45 deg±0.00000100 deg0 deg0.0 %
CumpleHopkins Eq. 2.229 (Leppington/Maidanik) Radiation efficiency at f = 2 fc1.41421.4142±1.00e-900.0 %
CumpleBies Eq. 7.62 corroborado por Hopkins Eq. 4.73 Mass-air-mass resonance f0, empty cavity76.9484 Hz76.8521 Hz±0.5%-0.0962 Hz25 %
CumpleBies Eq. 7.64 (double wall) Below f0 = mass law of the combined mass11.6144 dB11.6144 dB±0.00000100 dB0 dB0.0 %
CumpleHopkins Eq. 4.92 (composite) 1 % open area caps R at 10 lg(S/Sa)20 dB19.9996 dB±0.05 dB-0.0004 dB0.8 %
CumpleVigran Building Acoustics Eq. (3.109), printed p. 96 Flat 1 mm steel plate 1 m x 1 m, f(1,1)4.9 Hz4.93 Hz±0.05 Hz0.033 Hz66 %
CumpleVigran Eqs. (3.113)/(3.115), printed p. 96 Corrugated 1 mm steel plate (H = 10 mm, L = 100 mm), f(2,2)102 Hz102.09 Hz±0.1 Hz0.092 Hz92 %
CumpleBies:5e Eq. (7.59) corroborado por Vigran Eq. (6.112) Heckl coincidence-branch constant, dB (rho c = 414)-13.2 dB-13.217 dB±0.02 dB-0.017 dB85 %
CumpleBies:5e Eq. (7.60) corroborado por Vigran Eq. (6.112) Heckl recovery-branch constant, dB (rho c = 414)-23 dB-23.16 dB±0.2 dB-0.16 dB80 %
CumpleVigran Eq. (6.111) corroborado por Bies Eq. (7.38) Orthotropic diffuse integral below fc1 vs its exact mass-law form6.287723 dB6.287723 dB±0.000001 dB-1.40e-8 dB1.4 %
CumpleHopkins Table A2, printed p. 608 h.fc products of 25 building-material rows, worst deviation0 m·Hz0.0476 m·Hz±0.06 m·Hz0.0476 m·Hz79 %
CumpleHopkins Eq. 4.99/4.101 (Gomperts slit) Transmission maximum at first resonance1544.9615 Hz1542.9615 Hz±15 Hz-2 Hz13 %
Bending-wave plate-junction transmission (Cremer / Craik / Hopkins) 6/6
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleHopkins Eq. 5.12 (identical plates) X-junction corner tau12(0 deg) = 1/80.1250.125±1.00e-900.0 %
CumpleHopkins Eqs 5.12 + 5.6 (identical plates) X-junction corner angular average = 1/120.08330.0833±0.0000010000.0 %
CumpleHopkins Eqs 5.12 + 5.6 (identical plates) L-junction corner angular average = 1/30.33330.3333±0.0000010000.0 %
CumpleHopkins Eq. 5.14 (identical plates) In-line junction tau12(0 deg) = 111±1.00e-900.0 %
CumpleHopkins Eq. 5.7 (SEA consistency) X-junction reciprocity tau_bar_12 / tau_bar_21 = chi1.51.5±0.0000010000.0 %
CumpleHopkins Eq. 5.116 (identical plates, fc_j = f_ref) X-junction vibration reduction index = 10 lg(12)10.7918 dB10.7918 dB±0.00000100 dB0 dB0.0 %
Atmospheric refraction (Salomons rays / GFPE) 3/3
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleSalomons Sec. 4.4 (ray turning height, linear profile) Turning height of a 10 deg ray vs Rc(1 - cos theta0) (circular arc), m26.457 m26.457 m±0.1 m-3.94e-7 m0.0 %
CumpleSalomons Eq. (3.4) (GFPE vs spherical-wave ground effect, homogeneous) PE relative level at 500 m over grassland vs Weyl-Van der Pol, dB-16.368 dB-16.402 dB±0.5 dB-0.035 dB7.0 %
CumpleSalomons Eq. (3.4) (GFPE hard ground vs two-ray, homogeneous) PE relative level at 500 m over a rigid ground vs the coherent two-ray, dB5.997 dB5.593 dB±0.6 dB-0.405 dB68 %
Electroacoustics 9/9
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleBeranek & Mellow:2e Eq. (13.117) Piston resistance R1(x) = 1 - 2 J1(x)/x at x = 2ka = 20.4232750.423275±0.000011.92e-71.9 %
CumpleBeranek & Mellow:2e Eq. (13.118) Piston reactance X1(x) = 2 H1(x)/x at x = 2ka = 20.6467640.646764±0.00001-2.72e-72.7 %
CumpleBeranek & Mellow:2e Eq. (13.117) (low-frequency limit) R1 -> (ka)^2/2 as ka -> 0 (x = 0.02, ka = 0.01)0.000050.00005±0.01%-8.33e-1017 %
CumpleBeranek & Mellow:2e Eq. (4.151) Radiation mass M = 8 rho a^3 / 3 (a = 0.1 m, rho = 1.206)0.003216 kg0.003216 kg±1.00e-9 kg0 kg0.0 %
CumpleBeranek & Mellow:2e Eq. (13.102), Table 14.1 First directivity null at ka sin(theta) = 3.8317 (first zero of J1)00±0.00000100.0 %
CumpleBeranek & Mellow:2e §4.19 (half-space baffle) Directivity index DI -> 10 lg 2 = 3.01 dB as ka -> 03.0103 dB3.0103 dB±0.001 dB2.48e-7 dB0.0 %
CumpleLong, Architectural Acoustics:2e Eq. (18.21) Omnidirectional mic at Zs = -6 dB: L(H-M) <= L(H-L) - 4 dB76 dB76 dB±1.00e-9 dB0 dB0.0 %
CumpleLong, Architectural Acoustics:2e Eq. (18.22) Cardioid mic (DM = -2 dB) at Zs = -6 dB: L(H-M) <= L(H-L) - 2 dB78 dB78 dB±1.00e-9 dB0 dB0.0 %
CumpleLong, Architectural Acoustics:2e Eq. (18.23) Number-of-open-microphones correction 10 lg Nm at Nm = 46.0206 dB6.0206 dB±1.00e-12 dB0 dB0.0 %
Random-incidence and diffuse-field sensitivity (IEC 61183) 8/8
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleIEC 61183:1994 Formulas (A.1), (A.2), Table A.1 Adjustment factors K(phi) of all 36 angles, 10° steps in two planes36/36 angles of Table A.136/36 angles of Table A.1±000.0 %
CumpleIEC 61183:1994 A.6 NOTE 2, Table A.1 Four planes at 45° take half the factors of Table A.136/36 halved factors of Table A.136/36 halved factors of Table A.1±000.0 %
CumpleIEC 61183:1994 A.1.7 Largest of the 70 elements of 10° steps in two planes, about 2.2 % of the sphere2.2 %2.179 %±0.05 %-0.021 %42 %
CumpleIEC 61183:1994 Formula (A.3), Table A.1 The 72 factors of two planes sum to one with the poles in both sums11±1.00e-1200.0 %
CumpleIEC 61183:1994 Formulas (A.3), (1) An omnidirectional instrument has 10 lg gamma = 0 dB, so G_RI = G_F0 dB0 dB±1.00e-9 dB0 dB0.0 %
CumpleIEC 61183:1994 note to A.1.8 Directions of the 38 equal-area elements, to the 0.1° printed18/18 printed angles other than 77.9° and 282.1°18/18 printed angles other than 77.9° and 282.1°±000.0 %
CumpleIEC 61183:1994 note to A.1.8, Formula (A.5) Each of the 38 equal-area elements is 2.6 % of the sphere2.6 %2.632 %±0.05 %0.032 %64 %
CumpleIEC 61183:1994 Formulas (10), (11), Table B.1 Reference corrections of an LS2aP/LS2F microphone, 25 Hz to 20 kHz30/30 printed cells of Table B.130/30 printed cells of Table B.1±000.0 %
Free-field corrections of a sound level meter (IEC 62585) 16/16
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleIEC 62585:2012 Table I.2 Standard uncertainty of each of the 15 components at 1 kHz15/15 components of Table I.215/15 components of Table I.2±000.0 %
CumpleIEC 62585:2012 Table I.2 Combined standard uncertainty of the correction at 1 kHz0.059 dB0.059 dB±0.0001 dB0.0000311 dB62 %
CumpleIEC 62585:2012 Table I.2 Welch-Satterthwaite effective degrees of freedom at 1 kHz29.9829.98±0.010.00240 %
CumpleIEC 62585:2012 Table I.2, clause 5 Coverage factor for 95 % at the 29.98 degrees of freedom the table prints2.04 (printed 2.11, an erratum)2.042±0.0050.00240 %
CumpleIEC 62585:2012 Table I.2, clause 5 Expanded uncertainty of the correction at 1 kHz, to the printed guard digit0.121 dB (printed 0.12(4), an erratum)0.1206 dB±0.0005 dB-0.0004 dB80 %
CumpleIEC 62585:2012 Table I.3 Standard uncertainty of the four components that change at 8 kHz4/4 changed components of Table I.34/4 changed components of Table I.3±000.0 %
CumpleIEC 62585:2012 Table I.3 Combined standard uncertainty of the correction at 8 kHz0.14 dB0.14 dB±0.0005 dB0.0000274 dB5.5 %
CumpleIEC 62585:2012 Table I.3 Coverage factor at 8 kHz, more than 30 effective degrees of freedom22.001±0.0050.00120 %
CumpleIEC 62585:2012 Table I.3 Expanded uncertainty of the correction at 8 kHz0.28 dB0.28 dB±0.005 dB0.000161 dB3.2 %
CumpleIEC 62585:2012 Formula (H.1), Table H.1 Exact one-twelfth-octave frequencies from 1 kHz to 10 kHz41/41 frequencies of Table H.141/41 frequencies of Table H.1±000.0 %
CumpleIEC 62585:2012 clauses 9 to 14 Maximum permitted expanded uncertainty either side of each boundary18/18 printed maxima of clauses 9 to 1418/18 printed maxima of clauses 9 to 14±000.0 %
CumpleIEC 62585:2012 clause 6 Static-pressure component below 97 kPa, up to and above 3 kHz5/5 clause 6 components5/5 clause 6 components±000.0 %
CumpleIEC 62585:2012 Formulas (D.1) to (D.7) A calibrator's correction from readings built by (D.1) to (D.4)0 dB0 dB±0.000000000001 dB0 dB0.0 %
CumpleIEC 62585:2012 Formulas (E.1) to (E.6), Figure E.1 A coupler's correction from readings built by (E.1) to (E.3B)0 dB0 dB±0.000000000001 dB0 dB0.0 %
CumpleIEC 62585:2012 Formulas (F.1) to (F.13) An actuator's normalised correction from readings built by (F.1) to (F.3)0 dB0 dB±0.000000000001 dB0 dB0.0 %
CumpleIEC 62585:2012 Annex A, Figure A.1 Adjustment value of a response whose fit is known in closed form0.2 dB (closed form)0.2 dB±1.00e-12 dB0 dB0.0 %
Microphone calibration by comparison (IEC 61094-5, IEC 61094-8) 34/34
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleIEC 61094-5:2016 Table D.1 Standard uncertainty at 2 kHz of the 7 components whose row states a value7/7 components of Table D.17/7 components of Table D.1±000.0 %
CumpleIEC 61094-5:2016 D.3 Combined standard uncertainty of the example budget at 2 kHz0.0437 dB (printed 0.040, an erratum)0.0437 dB±0.0001 dB-0.0000308 dB62 %
CumpleIEC 61094-5:2016 D.2, D.3 Expanded uncertainty (k = 2) of the example budget at 2 kHz0.087 dB (printed 0.08, an erratum)0.087 dB±0.001 dB0.000338 dB68 %
CumpleIEC 61094-5:2016 D.3 Combined standard uncertainty by the strict calculation in linear form0.043614 dB (0.043669 dB in decibels)0.043614 dB±0.000001 dB2.45e-7 dB25 %
CumpleIEC 61094-5:2016 Table A.1 Correction of a WS3 microphone against an LS2aP in the jig of Figure A.4, 14 frequencies14/14 corrections of Table A.114/14 corrections of Table A.1±000.0 %
CumpleIEC 61094-5:2016 Table A.1 NOTE Expanded uncertainty of the correction at 20 kHz, a tenth of its value0.1443 dB0.1443 dB±1.00e-12 dB0 dB0.0 %
CumpleIEC 61094-5:2016 6.5, Table A.1 nombra además Barham et al.:(2014) Formulas (1) to (5), Tables 1 and 2 Correction of a WS3 microphone by the model of [1] from the inputs of its Table 1, 14 frequencies14/14 corrections of Table A.114/14 corrections of Table A.1±000.0 %
CumpleIEC 61094-5:2016 6.5, Table A.1 and its NOTE nombra además Barham et al.:(2014) Table 1 Largest deviation of the model at the reference air of clause 4 from Table A.1, against a tenth of the 10 % its NOTE allowsTable A.1, within 0.0144 dB (a tenth of 10 % of 1.443 dB)max deviation 0.0093 dB±0.0144 dB0.0093 dB64 %
CumpleIEC 61094-5:2016 A.2, Table A.1 NOTE nombra además Barham et al.:(2014) Formulas (1) to (5 Correction at twice the separation, the change A.2 names, against the model evaluated at twice the distance, 14 frequenciesthe model at L = 1.0 mm, every rowmax deviation 0.000000000000 dB; the change is 5.4 % to 6.3 % of each correction, where A.2 observed approximately 10 %±0.000000000001 dB0 dB0.0 %
CumpleIEC 61094-5:2016 Formulas (C.1) to (C.3) Sensitivity level of the test microphone through the interchange, whatever the channel gains, source drift and field asymmetrythe test microphone's level at all 5 frequenciesmax deviation 0.000000000 dB±1.00e-9 dB0 dB0.0 %
CumpleIEC 61094-5:2016 D.2 M_test = M_ref x R_V / R_P in linear form against the level formM_ref x R_V / R_P at all 5 frequenciesmax relative deviation 0.000000000000±0.00000000000100.0 %
CumpleIEC 61094-8:2012 A.2 Monitor ratios cancel a source that drifts between the two measurementsthe test microphone's level at all 5 frequenciesmax deviation 0.000000000 dB±1.00e-9 dB0 dB0.0 %
CumpleIEC 61094-8:2012 Table 1 Typical expanded uncertainty of the 5 reference calibration options at 1 kHz and 10 kHz10/10 cells of Table 110/10 cells of Table 1±000.0 %
CumpleIEC 61094-8:2012 Table 2 Source of uncertainty and subclause references of the 12 typical components12/12 rows of Table 212/12 rows of Table 2±000.0 %
CumpleIEC 61094-8:2012 Formula (B.1), Figure B.1 A reflection from the boundary of the effective free-field region arrives at the end of a 5 ms window5 ms5 ms±1.00e-9 ms0 ms0.0 %
CumpleIEC 61094-5:2016 5.1.1, Formulas (C.1) to (C.3) Phase of the test microphone through the interchange, whatever the channel phase shifts (one inverting) and field asymmetrythe test microphone's phase at all 5 frequencies, both channel pairsmax deviation 0.000000000 deg±1.00e-9 deg0 deg0.0 %
CumpleIEC 61094-8:2012 5.1, A.2 Monitor phases cancel a source that drifts in phase between the two measurementsthe test microphone's phase at all 5 frequenciesmax deviation 0.000000000 deg±1.00e-9 deg0 deg0.0 %
CumpleIEC 61094-5:2016 Table D.1 (Microphone impedance) A semi-range of 0.005 dB of the impedance effect as a standard uncertainty0.003 dB (0.005/1.7321, printed)0.003 dB±1.00e-12 dB0 dB0.0 %
CumpleIEC 61094-2:2009 Formula (3) nombra además IEC 61094-5:2016 7.4 Pressure ratio of a substitution in a closed coupler against the admittance sums of Formula (3), 7 frequenciesthe ratio of the two sums of Formula (3) at all 7 frequenciesmax relative deviation 0.000000000000±0.00000000000100.0 %
CumpleIEC 61094-5:2016 Table D.1 (Microphone impedance), 7.4 Pressure on each microphone behind the air between them, in series, 7 frequenciesp0 Z_a/(Z_a + Z_x) for each microphone, at all 7 frequenciesmax relative deviation 0.000000000000±0.00000000000100.0 %
CumpleIEC 61094-2:2009 E.4 nombra además IEC 61094-1:2000 6.2.2 Lumped equivalent volume: no imaginary impedance at the resonance, and the loss factor r_a 2 pi f0 c_a2/2 relations of E.42/2 relations of E.4±000.0 %
CumpleIEC 61094-5:2016 Table D.1 (Microphone impedance), 7.4 nombra además Jarvis:(1996) NPL CIRA(EXT) 010 Appendix B Ratio of the pressures on an LS2P and a high sensitivity WS2P in the coupler of [2], against the ladder it prints, 200 frequenciesP1/P2 of Appendix B at all 200 frequenciesmax relative deviation 0.000000000000±0.00000000000100.0 %
CumpleJarvis:(1996) NPL CIRA(EXT) 010 Appendix B, folio 26 Volume of the coupler of the example, v = pi r^2 L2.534e-7 m³ as printed (+/-0.0005e-7 m³, its last digit)2.53353e-07 m³±0.00000000005 m³-0.00000000005 m³100 %
CumpleJarvis:(1996) NPL CIRA(EXT) 010 Appendix B, graph on folio 27 Dip and value at 20 kHz of the error in level, and peak and value at 20 kHz of the error in phase, read off the printed graphs6/6 readings of the graphs6/6 readings of the graphs±000.0 %
CumpleIEC 61094-5:2016 6.7 A jig validated against a reciprocity calibration on a grid of its own: agreement within the root-sum-square of the two expanded uncertainties, 5 frequencies6/6 verdicts6/6 verdicts±000.0 %
CumpleIEC 61094-5:2016 6.7 nombra además ISO/IEC Guide 98-3 F.1.2.3, Example 2 Correlation of two calibrations against the same standard of 10^-4, for comparisons of 100, 10 and 1 x 10^-6, as printed3/3 coefficients3/3 coefficients±000.0 %
CumpleIEC 61094-5:2016 6.7, Table D.1 nombra además ISO/IEC Guide 98-3 5.2.2 Expanded uncertainty of the difference of two calibrations against the same LS2P, each with the budget of Table D.10.101271911 dB, the reference row cancelling (0.123515181 dB as independent)0.101271911 dB at the worst of 5 frequencies±0.000000001 dB0 dB0.0 %
CumpleIEC 61094-8:2012 B.6.1, Formula (B.10) Spectrum of a rectangular pulse of a = 10 V and b = 2.5 µs at 6 frequencies, as printedFormula (B.10) at all 6 frequenciesmax deviation 0.000000000000 of 2ab±0.00000000000100.0 %
CumpleIEC 61094-8:2012 B.6.1 First zero of the pulse spectrum, f = 1/(2b), for b = 2.5 µs200000 Hz200000 Hz±0.00000100 Hz0 Hz0.0 %
CumpleIEC 61094-8:2012 B.6.1 Half-duration b for a first zero an order of magnitude above 20 kHz, 'just a few microseconds'2.5 µs ('just a few microseconds')2.5 µs±1.00e-9 µs0 µs0.0 %
CumpleIEC 61094-8:2012 B.2.2 Length of the impulse response of a 120 Hz step, against the 8 ms of the primary reflections1/120 Hz = 8.333 ms, past the 8 ms printed2/2 conditions of B.2.2±000.0 %
CumpleIEC 61094-8:2012 B.2.2 Length of the impulse response of the 30 Hz step of a large free-field room33.333 ms33.333 ms±1.00e-9 ms0 ms0.0 %
CumpleIEC 61094-8:2012 B.2.1, Formulas (B.2) and (B.3); 8.6 A reflection removed by the time window, on data simulated with and without it, 6 frequenciesthe direct sound alone, with and without the reflectionmax deviation 0.000001 of the direct sound±0.00010.0000011.0 %
CumpleIEC 61094-8:2012 Formula (B.1), B.1.3 a) The longest window for a reflected path of 2.2 m at 1 m puts that path on the boundary of the region2.2 m2.2 m±1.00e-12 m0 m0.0 %
Microphone calibration by reciprocity (IEC 61094-2, IEC 61094-3) 22/22
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleIEC 61094-2:2009 Table A.1 Gerber's E_V by the full solution, 96 entries at R = 0.2, 0.5 and 1, X = 1 to 800all 96 entries within the stated 0.00001max deviation 0.0000059±0.000010.000005959 %
CumpleIEC 61094-2:2009 Formula (A.2) Modulus of the approximation against Table A.1 where A.2 states 0.01 %, X > 5within 0.01 % at every entrymax relative deviation 0.0000060±0.00010.0000066.0 %
CumpleIEC 61094-2:2009 A.3 Lowest whole frequency at which check_coupler holds Formulas (A.3) and (A.4) valid, LS1P and LS2aP plane-wave couplers of Table C.1LS1P = 3 Hz; LS2aP = 12 HzLS1P = 3 Hz; LS2aP = 12 Hz±0 Hz0 Hz0.0 %
CumpleIEC 61094-2:2009 Table B.1 Real part of the input impedance of six open capillary tubes, 20 Hz to 20 kHz, 186 entriesall 186 entries within 0.002 GPa·s/m³max deviation 0.0011 (20 Hz to 250 Hz: 0.0005)±0.002 GPa·s/m³0.0011 GPa·s/m³55 %
CumpleIEC 61094-2:2009 Table B.2 Imaginary part of the input impedance of six open capillary tubes, 20 Hz to 20 kHz, 186 entriesall 186 entries within 0.002 GPa·s/m³max deviation 0.0018 (20 Hz to 250 Hz: 0.0007)±0.002 GPa·s/m³0.0018 GPa·s/m³90 %
CumpleIEC 61094-2:2009 Table C.1 Nominal dimensions of the plane-wave couplers of LS1P, LS2aP and LS2bP microphones18/18 cells of Table C.118/18 cells of Table C.1±000.0 %
CumpleIEC 61094-2:2009 Table C.2 Nominal dimensions and tolerance of the large-volume couplers of LS1P, LS2aP and LS2bP microphones21/21 cells of Table C.221/21 cells of Table C.2±000.0 %
CumpleIEC 61094-2:2009 Table C.3 Wave-motion corrections of the air-filled large-volume coupler for LS1P microphones6/6 rows of Table C.36/6 rows of Table C.3±000.0 %
CumpleIEC 61094-2:2009 Table 1 The 35 uncertainty components and the subclauses each is referred to35/35 rows of Table 135/35 rows of Table 1±000.0 %
CumpleIEC 61094-2:2009 Formulas (2) and (7) Three LS1P microphones through the plane-wave coupler give their sensitivities backthe three sensitivities at all 8 frequenciesmax relative deviation below 1e-12±0.00000000000100.0 %
CumpleIEC 61094-2:2009 Formula (8) Two microphones and the ratio from an auxiliary source give their sensitivities backboth sensitivities at all 8 frequenciesmax relative deviation below 1e-12±0.00000000000100.0 %
CumpleIEC 61094-2:2009 Formula (4) The lossless plane-wave line at 20 Hz is the compliance of its gas (stiffness rho c^2), the excess front-cavity volumes and the equivalent volumesthe compliances of the line, rho c**2, to (k l0)**2relative deviation 3.39e-06±0.000010.0000033934 %
CumpleIEC 61094-2:2009 Formula (A.1) Heat-conduction factor from isothermal (kappa) to adiabatic (1) in the large-volume coupler of Table C.2kappa at 0.01 Hz, 1 at 1 MHzmax relative deviation 2.20e-04±0.0020.0002211 %
CumpleIEC 61094-2:2009 Formulas (3) and (A.1) with Table A.1 Heat-conducting transfer impedance of a large-volume coupler of R = 0.5 at the X = 2 and X = 20 of Table A.1, at 23 °C and at 20 °C, 95 kPaFormula (3) with Table A.1, within its 0.00001max relative deviation 1.49e-06±0.000010.0000014915 %
CumpleIEC 61094-2:2009 Formulas (4) and (A.3) to (A.5) Heat-conducting and viscous transfer impedance of the LS1P plane-wave coupler at 250 Hz, 1 kHz and 8 kHzFormulas (4), (A.3), (A.4) and (A.5) at 3 frequenciesmax relative deviation below 1e-12±0.00000000000100.0 %
CumpleIEC 61094-3:2016 Table B.1 Attenuation of sound pressure in air by ISO 9613-1, 1 kHz to 50 kHz at nine conditions, 162 entries162/162 entries of Table B.1162/162 entries of Table B.1±000.0 %
CumpleIEC 61094-3:2016 B.2 Attenuation by the five steps of B.2 against Table B.1, within the ±10 % B.2 stateswithin ±10 % of all 162 entriesmax relative deviation 0.0108±0.10.010811 %
CumpleIEC 61094-3:2016 B.2 Step 1 comparado con IEC 61094-2:2009 Table F.2 Water vapour mole fraction at 23 °C, 101.325 kPa, 50 % with the saturation pressure of Table F.20.01392758, the x_w of IEC 61094-2 Annex F0.01392758±1e-10%00.0 %
CumpleIEC 61094-3:2016 Formulas (7), (8) and (D.1) Three microphones at 0.20 m to 0.30 m give their complex free-field sensitivities backthe three complex sensitivities at all 6 frequenciesmax relative deviation below 1e-12±0.00000000000100.0 %
CumpleIEC 61094-3:2016 Formula (9) Two microphones and the ratio from an auxiliary source give their complex sensitivities back, as COR1 makes the formulaboth complex sensitivities at all 6 frequenciesmax relative deviation below 1e-12±0.00000000000100.0 %
CumpleIEC 61094-3:2016 6.5 Acoustic centre where the inverse of the pressure, corrected for attenuation, crosses the axis4 mm4 mm±1.00e-9 mm0 mm0.0 %
CumpleIEC 61094-3:2016 Table 1 The 23 uncertainty components and the subclauses each is referred to23/23 rows of Table 123/23 rows of Table 1±000.0 %
Audio-frequency induction loops (IEC 60118-4:2014+A1, IEC 62489-1:2010+A1) 67/67
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleIEC 60118-4:2014 3.1 Level of 400 mA/m, the reference magnetic field strength0 dB0 dB±1.00e-12 dB0 dB0.0 %
CumpleIEC 60118-4:2014 4.3 Level of 100 mA/m, the long-term average of 70 dB SPL-12 dB-12.04 dB±0.05 dB-0.041 dB82 %
CumpleIEC 60118-4:2014 6.4 NOTE 2 Third-order Butterworth band limit at 100 Hz (-3 dB at 75 Hz and 6.5 kHz)-0.711 dB from the 6.4 filters (NOTE 2 prints -0.8 dB, see ERRATA)-0.711 dB±0.001 dB-0.000374 dB75 %
CumpleIEC 60118-4:2014 6.4 NOTE 2 Third-order Butterworth band limit at 5 kHz (-3 dB at 75 Hz and 6.5 kHz)-0.818 dB from the 6.4 filters (NOTE 2 prints -0.7 dB, see ERRATA)-0.818 dB±0.001 dB0.000293 dB59 %
CumpleIEC 60118-4:2014 6.4 Band-limited pink noise flat within 1 dB from 100 Hz to 5 kHzwithin +/-1 dB from 100 Hz to 5 kHzworst -0.818 dB at 5000 Hz[-1, 1] dB-0.818 dB82 %
CumpleIEC 60118-4:2014 6.4 Peak-to-peak over RMS of the pink noise, at least 18 dB (crest factor 4)at least 18 dB (IEC 62489-1 5.4.8.2 b): 18 dB +/-2 dB)18.062 dB[18, 20] dB18.062 dB94 %
CumpleIEC 60118-4:2014 Table 2 Combi signal: RMS of the pink noise re the sine-6 dB-5.999 dB±0.02 dB0.001 dB5.0 %
CumpleIEC 60118-4:2014 Table 2 Combi signal: sine peaks below the maximum peak of the noise3 dB3.031 dB±0.05 dB0.031 dB62 %
CumpleIEC 60118-4:2014 7.2 Reference signal-to-noise ratio classed at 47, 32 and 22 dBeach boundary in its 7.2 classabove 47 dB = 1; 47 dB = 1; 32 dB = 1; below 32 dB = 1; 22 dB = 1; below 22 dB = 1±000.0 %
CumpleIEC 60118-4:2014 8.4.3 Field strength at every point within 3 dB of 8.2.7+3 dB = 1; -3 dB = 1; +3.01 dB = 0; -3.01 dB = 0; -2.9 dB on a meter reading 400 mA/m as -5.9 dB = 1+3 dB = 1; -3 dB = 1; +3.01 dB = 0; -3.01 dB = 0; -2.9 dB on a meter reading 400 mA/m as -5.9 dB = 1±000.0 %
CumpleIEC 60118-4:2014 8.2.7 Maximum field of 400 mA/m reached at one point at least0 dB at one point, -3 dB elsewhere = 1; -0.01 dB at best = 0; pink noise: -6 dB at one point (Table 3) = 1; pink noise: -6.01 dB at best = 00 dB at one point, -3 dB elsewhere = 1; -0.01 dB at best = 0; pink noise: -6 dB at one point (Table 3) = 1; pink noise: -6.01 dB at best = 0±000.0 %
CumpleIEC 60118-4:2014 8.3.7 Frequency response within 3 dB of 1 kHz from 100 Hz to 5 kHz-3 dB at 100 Hz, +3 dB at 5 kHz = 1; -3.01 dB at 100 Hz = 0; +3.01 dB at 5 kHz = 0; -20 dB outside the band = 1; -18.6 dB at 100 Hz against -15.6 dB at 1 kHz = 1; -31.7 dB at 5 kHz against -34.7 dB at 1 kHz = 1-3 dB at 100 Hz, +3 dB at 5 kHz = 1; -3.01 dB at 100 Hz = 0; +3.01 dB at 5 kHz = 0; -20 dB outside the band = 1; -18.6 dB at 100 Hz against -15.6 dB at 1 kHz = 1; -31.7 dB at 5 kHz against -34.7 dB at 1 kHz = 1±000.0 %
CumpleIEC 60118-4:2014+A1 9.5 Small-volume limits: 6 dB range, 0 dB reached, +8 dB area+/-6 dB with 0 dB reached = 1; +6.01 dB at one point = 0; every point below 0 dB = 0; +8 dB in the standing area = 1; +8.01 dB in the standing area = 0+/-6 dB with 0 dB reached = 1; +6.01 dB at one point = 0; every point below 0 dB = 0; +8 dB in the standing area = 1; +8.01 dB in the standing area = 0±000.0 %
CumpleIEC 60118-4:2014+A1 Figures 2 and 3 Measurement points of a refuge and a counter, in millimetres2 a) inner radius = 300 mm; 2 a) outer radius = 500 mm; 2 b) l4 = 424 mm; 2 b) l5 = 700 mm; 3 a) radius = 300 mm; 3 a) l4 = 150 mm; 3 b) top height = 1700 mm2 a) inner radius = 300 mm; 2 a) outer radius = 500 mm; 2 b) l4 = 424 mm; 2 b) l5 = 700 mm; 3 a) radius = 300 mm; 3 a) l4 = 150 mm; 3 b) top height = 1700 mm±0 mm0 mm0.0 %
CumpleIEC 60118-4:2014+A1 10.2 Lower end of the 3 dB commissioning window, mA/m283 mA/m283.2 mA/m±0.5 mA/m0.178 mA/m36 %
CumpleIEC 60118-4:2014+A1 10.2 Upper end of the 3 dB commissioning window, mA/m566 mA/m (+/-1: printed as 400 sqrt(2), 565 at +3 dB)565 mA/m±1 mA/m-0.985 mA/m99 %
CumpleIEC 60118-4:2014+A1 Table 4 Programme material and overload test frequencytransient_speech limit = 1250 Hz; transient_speech test = 2500 Hz; speech limit = 1600 Hz; speech test = 3150 Hz; music limit = 2000 Hz; music test = 4000 Hztransient_speech limit = 1250 Hz; transient_speech test = 2500 Hz; speech limit = 1600 Hz; speech test = 3150 Hz; music limit = 2000 Hz; music test = 4000 Hz±0 Hz0 Hz0.0 %
CumpleIEC 60118-4:2014+A1 10.3.2 Overload test current 7 dB below the one for the required field-7 dB-7 dB±1.00e-9 dB0 dB0.0 %
CumpleIEC 60118-4:2014+A1 10.3.2 Sweep end where the voltage of a 0.69 ohm, 109 uH loop doubles, Hz2654.268 Hz, where |Z| is twice its 1 kHz value2654.268 Hz±0.00000100 Hz0 Hz0.0 %
CumpleIEC 60118-4:2014+A1 10.3.3 No clipping at the Table 4 frequency, judged there when the sweep runs pastcompliance at the 2.5 kHz voltage = 1; compliance 0.1 % below it = 0compliance at the 2.5 kHz voltage = 1; compliance 0.1 % below it = 0±000.0 %
CumpleIEC 60118-4:2014+A1 10.4.7 System noise: -47 dB ceiling or 1 dB riseSNR 55 dB, on at -47 dB = 1; SNR 55 dB, on at -46.99 dB = 0; SNR 40 dB, on 1 dB up = 1; SNR 40 dB, on 1.01 dB up = 0; SNR 32.7 dB, on at -31.7 dB = 1SNR 55 dB, on at -47 dB = 1; SNR 55 dB, on at -46.99 dB = 0; SNR 40 dB, on 1 dB up = 1; SNR 40 dB, on 1.01 dB up = 0; SNR 32.7 dB, on at -31.7 dB = 1±000.0 %
CumpleIEC 60118-4:2014 E.1 Centre field of a 5 m square loop by Biot-Savart, against 2 sqrt(2) I/(pi d)0.54019 A/m0.54019 A/m±1e-10%0 A/m0.0 %
CumpleIEC 60118-4:2014 E.1 Centre field of a 10 m by 15 m loop with d = sqrt(d1 d2), as E.1 prints it0.220532 A/m0.220532 A/m±1e-10%0 A/m0.0 %
CumpleIEC 60118-4:2014 Figure E.2 b) Horizontal component of a 15 by 10 loop at 1.2 units, 2.5 % across its width4.2 dB read off the curve (+/-0.5)4.21 dB±0.5 dB0.011 dB2.2 %
CumpleIEC 60118-4:2014 Figure E.2 b) Horizontal component of a 15 by 10 loop at 1.2 units, 30 % across its width-15.0 dB read off the curve (+/-0.5)-14.72 dB±0.5 dB0.28 dB56 %
CumpleIEC 60118-4:2014 Figure E.2 b) Vertical component of a 15 by 10 loop at 1.2 units, 12.5 % across its width1.7 dB read off the curve (+/-0.5)1.89 dB±0.5 dB0.189 dB38 %
CumpleIEC 60118-4:2014 Figure E.2 b) Vertical component of a 15 by 10 loop at 1.2 units, 50 % across its width-0.8 dB read off the curve (+/-0.5)-0.48 dB±0.5 dB0.32 dB64 %
CumpleIEC 60118-4:2014 Figure H.1 Current for 400 mA/m 1.4 m above a 10 m loop of aspect ratio 14.89 A read off the curve (+/-0.03)4.884 A±0.03 A-0.006 A20 %
CumpleIEC 60118-4:2014 Figure H.1 Current for 400 mA/m 1.4 m above a 10 m loop of aspect ratio 1.55.64 A read off the curve (+/-0.03)5.632 A±0.03 A-0.008 A27 %
CumpleIEC 60118-4:2014 Figure H.1 Current for 400 mA/m 1.4 m above a 10 m loop of aspect ratio 26.04 A read off the curve (+/-0.03)6.038 A±0.03 A-0.002 A6.7 %
CumpleIEC 60118-4:2014 Figure H.1 Current for 400 mA/m 1.4 m above a 10 m loop of aspect ratio 36.41 A read off the curve (+/-0.03)6.409 A±0.03 A-0.001 A3.3 %
CumpleIEC 60118-4:2014 Figure H.1 Current for 400 mA/m 1.4 m above a 10 m loop of aspect ratio 56.63 A read off the curve (+/-0.03)6.635 A±0.03 A0.005 A17 %
CumpleIEC 62489-1:2010+A1 5.4.10.2 Loop current for 400 mA/m 1.4 m above a 3-turn 6 m by 2 m loop, by Biot-Savart0.4 A/m0.4 A/m±1e-10%0 A/m0.0 %
CumpleIEC 60118-4:2014 E.2 Telecoil response 45 degrees off axis-3 dB-3.01 dB±0.05 dB-0.01 dB20 %
CumpleIEC 60118-4:2014 E.2 Telecoil response 70 degrees off axis-9.3 dB-9.32 dB±0.05 dB-0.019 dB38 %
CumpleIEC 60118-4:2014 E.3 Loop impedance over resistance where the reactance equals it1.41.414±0.0150.01493 %
CumpleIEC 60118-4:2014 E.6 One oersted in amperes per metre79.58 A/m79.577 A/m±0.005 A/m-0.003 A/m60 %
CumpleIEC 60118-4:2014 E.6 Flux density of 1 A/m in air, microtesla1.256 µT (+/-0.001: the print truncates 1.2566, see ERRATA)1.2566 µT±0.001 µT0.0006 µT60 %
CumpleIEC 62489-1:2010+A1 Table B.1 neck loop: resistance, 1/58 ohm mm2/m copper0.24 ohm0.238 ohm±0.005 ohm-0.002 ohm40 %
CumpleIEC 62489-1:2010+A1 Table B.1 neck loop: impedance at 2 kHz from the printed R and L1.09 ohm1.095 ohm±0.012 ohm0.005 ohm41 %
CumpleIEC 62489-1:2010+A1 Table B.1 neck loop: impedance at 5 kHz from the printed R and L2.67 ohm2.681 ohm±0.021 ohm0.011 ohm52 %
CumpleIEC 62489-1:2010+A1 Table B.1 counter loop: resistance, 1/58 ohm mm2/m copper0.37 ohm (with the 1.6 m its sides give, see ERRATA)0.368 ohm±0.005 ohm-0.002 ohm40 %
CumpleIEC 62489-1:2010+A1 Table B.1 counter loop: inductance by Grover's Formula (58), no internal term189 µH189.42 µH±0.5 µH0.416 µH83 %
CumpleIEC 62489-1:2010+A1 Table B.1 counter loop: impedance at 2 kHz from the printed R and L2.41 ohm2.404 ohm±0.012 ohm-0.006 ohm50 %
CumpleIEC 62489-1:2010+A1 Table B.1 counter loop: impedance at 5 kHz from the printed R and L5.96 ohm5.949 ohm±0.021 ohm-0.011 ohm52 %
CumpleIEC 62489-1:2010+A1 Table B.1 home loop: resistance, 1/58 ohm mm2/m copper0.24 ohm0.241 ohm±0.005 ohm0.001 ohm20 %
CumpleIEC 62489-1:2010+A1 Table B.1 home loop: inductance by Grover's Formula (58), no internal term22 µH22.23 µH±0.5 µH0.232 µH46 %
CumpleIEC 62489-1:2010+A1 Table B.1 home loop: impedance at 2 kHz from the printed R and L0.37 ohm0.366 ohm±0.013 ohm-0.004 ohm31 %
CumpleIEC 62489-1:2010+A1 Table B.1 home loop: impedance at 5 kHz from the printed R and L0.74 ohm0.732 ohm±0.021 ohm-0.008 ohm37 %
CumpleIEC 62489-1:2010+A1 Table B.1 small room: resistance, 1/58 ohm mm2/m copper0.32 ohm0.322 ohm±0.005 ohm0.002 ohm40 %
CumpleIEC 62489-1:2010+A1 Table B.1 small room: inductance by Grover's Formula (58), no internal term47 µH47.21 µH±0.5 µH0.21 µH42 %
CumpleIEC 62489-1:2010+A1 Table B.1 small room: impedance at 2 kHz from the printed R and L0.67 ohm0.672 ohm±0.013 ohm0.002 ohm15 %
CumpleIEC 62489-1:2010+A1 Table B.1 small room: impedance at 5 kHz from the printed R and L1.52 ohm1.511 ohm±0.021 ohm-0.009 ohm42 %
CumpleIEC 62489-1:2010+A1 Table B.1 typical place of worship: resistance, 1/58 ohm mm2/m copper0.69 ohm0.69 ohm±0.005 ohm-0.000345 ohm6.9 %
CumpleIEC 62489-1:2010+A1 Table B.1 typical place of worship: inductance by Grover's Formula (58), no internal term109 µH109.24 µH±0.5 µH0.237 µH47 %
CumpleIEC 62489-1:2010+A1 Table B.1 typical place of worship: impedance at 2 kHz from the printed R and L1.54 ohm1.534 ohm±0.013 ohm-0.006 ohm47 %
CumpleIEC 62489-1:2010+A1 Table B.1 typical place of worship: impedance at 5 kHz from the printed R and L3.5 ohm3.493 ohm±0.021 ohm-0.007 ohm33 %
CumpleIEC 62489-1:2010+A1 Table B.1 large place of worship: resistance, 1/58 ohm mm2/m copper0.76 ohm0.759 ohm±0.005 ohm-0.001 ohm20 %
CumpleIEC 62489-1:2010+A1 Table B.1 large place of worship: impedance at 2 kHz from the printed R and L2.85 ohm2.843 ohm±0.012 ohm-0.007 ohm56 %
CumpleIEC 62489-1:2010+A1 Table B.1 large place of worship: impedance at 5 kHz from the printed R and L6.89 ohm6.891 ohm±0.021 ohm0.001 ohm4.7 %
CumpleIEC 60028:1925 clause I Resistivity of standard annealed copper at 20 degC, from 1 m of 1 mm20.017241 ohm·mm²/m0.017241 ohm·mm²/m±1e-10%0 ohm·mm²/m0.0 %
CumpleIEC 62489-1:2010+A1 5.4.7.2 Maximum output current: the voltage across the resistance over its value where the THD reaches its rating6.6489 A6.6489 A±1e-10%0 A0.0 %
CumpleIEC 62489-1:2010+A1 5.4.8.2 Compliance voltage of a sine, the average peak over sqrt(2)9.8995 V9.8995 V±1.00e-9 V0 V0.0 %
CumpleIEC 62489-1:2010+A1 5.4.14.1 In-phase part of a quadrature network at 85 degrees0.0870.0872±0.00050.000240 %
CumpleIEC 62489-1:2010+A1 5.4.14.1 Rise where the fields add at 85 degrees0.72 dB0.726 dB±0.01 dB0.006 dB60 %
CumpleIEC 62489-1:2010+A1 5.4.14.1 Fall where the fields subtract at 85 degrees-0.792 dB, 20 lg(1 - cos 85) (printed as 0.72 dB, see ERRATA)-0.792 dB±1.00e-9 dB0 dB0.0 %
CumpleE DIN EN 62489-1/A2:2017-10 Annex D, D.1.2 and D.1.3 Neck-loop types of the draft: DC resistance and input voltage for 400 mA/mtype 1 at -5 % = 1; type 1 at +5 % = 1; type 1 at +5.1 % = 0; type 2 at 32 ohm = 1; type 2 below 32 ohm = 0; 1.07 V for 400 mA/m = 0type 1 at -5 % = 1; type 1 at +5 % = 1; type 1 at +5.1 % = 0; type 2 at 32 ohm = 1; type 2 below 32 ohm = 0; 1.07 V for 400 mA/m = 0±000.0 %
Headphones and the programme signal (IEC 60268-7:2010, IEC 60268-1:1985) 26/26
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleIEC 60268-1:1985 Table II The 31 bands of the simulated programme signal, as published31/31 bands of Table II31/31 bands of Table II±000.0 %
CumpleIEC 60268-1:1985 Clause 7 Note Power over the full range above the 0 dB of one bandapproximately 12.5 dB12.56 dB±0.1 dB0.058 dB58 %
CumpleIEC 60268-1:1985 Figure 2 Pink noise through the filter of Figure 2 inside every tolerance of Table IIone level puts all 31 bands inside Table IIsmallest margin 0.178 dB, at 400 Hz and 5000 Hz[0, +∞] dB0.178 dB-
CumpleIEC 60268-1:1985 Table II Band levels of the generator's Table II density, integrated numerically0 dB from every printed levellargest difference 5.7e-10 dB±0.000001 dB5.68e-10 dB0.1 %
CumpleIEC 60268-1:1985 Clause 7 A 60 s record of the generator judged in one-third-octave bandsall 31 bands inside Table IIsmallest margin 0.371 dB[0, +∞] dB0.371 dB-
CumpleIEC 60268-7:2010 Clause 4 Impedance in mantissa and exponent form: 8, 32 and 600 ohm both ways3/3 printed codes ("08R0", "32R0", "06R2")3/3 printed codes±000.0 %
CumpleIEC 60268-7:2010 8.2.1 b) Lowest modulus in the rated range at 80 % and at 79.9 % of the rated value80 % passes, 79.9 % fails80 % = 1; 79.9 % = 0±000.0 %
CumpleIEC 60268-7:2010 8.3.3 Characteristic voltage from 100 dB at 0.1 V: the e.m.f. for 94 dB0.050119 V0.050119 V±1.00e-12 V0 V0.0 %
CumpleIEC 60268-7:2010 8.5.2 b) with 7.1 NOTE Source e.m.f. for 1 mW in 32 ohm through the 120 ohm of IEC 619380.849706 V0.849706 V±1.00e-12 V0 V0.0 %
CumpleIEC 60268-7:2010 8.5.2 b) and 8.5.3 c) Working level of a 32 ohm headphone that is 40 ohm at 500 Hz, on 120 ohm20 lg(4.75/4) = 1.4927 dB below the definition1.4927 dB±1.00e-12 dB0 dB0.0 %
CumpleIEC 60268-7:2010 8.4 with 8.3.1 NOTE 2 Power of the 5 V rated source e.m.f. in 32 ohm through 120 ohm0.034626 W0.034626 W±1.00e-12 W0 W0.0 %
CumpleIEC 60268-7:2010 Figure 3 NOTE resuelto con IEC 61672-1:2013 Table 3 A-weighting coefficient of each band of Table II in the power summation31/31 bands matching Table 331/31 bands matching Table 3±000.0 %
CumpleIEC 60268-7:2010 8.3.4, Figure 3 NOTE Programme characteristic voltage of a flat headphone, 21 bands at 80 dB from 0.1 V0.109368 V0.109368 V±1.00e-12 V0 V0.0 %
CumpleIEC 60268-7:2010 8.3.5 g) Corrected characteristic voltage, the mean e.m.f. of three fittings0.109852 V0.109852 V±1.00e-12 V0 V0.0 %
CumpleIEC 60268-7:2010 8.3.2.2 b) Clipped programme signal at the two ends of the 1.8 to 2.2 window1.8 and 2.2 pass with the Table II spectrum; 1.7, 2.3 and unclipped fail1.7 = 0; 1.8 = 1; 2.2 = 1; 2.3 = 0; unclipped = 0±000.0 %
CumpleIEC 60268-7:2010 8.3.6.2 b) Protection voltage where the sensitivity has changed 1 dB1.007937 V1.007937 V±1.00e-12 V0 V0.0 %
CumpleIEC 60268-7:2010 8.6.3.2 d), 8.6.3.3 Panel sizes: eight persons for a measurement, 16 for a reference8 persons measure, 16 qualify a reference7 measure = 0; 7 reference = 0; 8 measure = 1; 8 reference = 0; 15 measure = 1; 15 reference = 0; 16 measure = 1; 16 reference = 1±000.0 %
CumpleIEC 60268-7:2010 8.6.3.1 resuelto con IEC 60268-1:1985 Clause 3 Comparison response referred to the standard reference frequency of 1 000 Hz1 000 Hz by default, and 0 dB on that bandreference = 1000; response there = 0±000.0 %
CumpleIEC 60268-7:2010 8.6.5.3 with 8.6.5.2 h) Ear canal panel: eight persons for a measurement, 16 to calibrate a reference8 persons measure, 16 calibrate a reference7 measure = 0; 7 reference = 0; 8 measure = 1; 8 reference = 0; 15 measure = 1; 15 reference = 0; 16 measure = 1; 16 reference = 1±000.0 %
CumpleIEC 60268-7:2010 8.6.5.2 g), Formula (1) Ear canal response of a headphone 3 dB up at 2 kHz and level elsewhere3 dB3 dB±1.00e-12 dB0 dB0.0 %
CumpleIEC 60268-7:2010 8.6.5.2 c) and f) Fittings 2.5 dB apart and a 500 Hz band 3 dB off, inclusive2.5 dB and 3 dB are inside, 2.6 dB and 3.1 dB not2.5 dB apart = 1; 2.6 dB apart = 0; 3.0 dB off = 1; 3.1 dB off = 0±000.0 %
CumpleIEC 60268-7:2010 8.7.3.3 NOTE 1 Level of the 70 Hz tone re the rated input voltage-1.9 dB-1.94 dB±0.05 dB-0.038 dB76 %
CumpleIEC 60268-7:2010 8.7.3.3 NOTE 1 Level of the 600 Hz tone re the rated input voltage-14 dB-13.98 dB±0.05 dB0.021 dB42 %
CumpleIEC 60268-7:2010 8.7.3.3 b) and Formula (3) Modulation products read at 530, 670, 460 and 740 Hz460, 530, 670 and 740 Hz (item b; Formula (3) prints 470 Hz, see ERRATA)third lower = 460 Hz; second lower = 530 Hz; second upper = 670 Hz; third upper = 740 Hz±0 Hz0 Hz0.0 %
CumpleIEC 60268-7:2010 8.7.4.1 Each tone of the difference-frequency signal at half the rated voltage-6.021 dB each, 80 Hz apart-6.021 dB±1.00e-9 dB0 dB0.0 %
CumpleIEC 60268-7:2010 Annex B a) to e) A probe microphone on each printed limita, d, e pass on the limit; b, c fail on ita = 1; b = 0; c = 0; d = 1; e = 1±000.0 %
Industrial noise control 23/23
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleBies:5e Eq. (8.111) Expansion-chamber peak TL = 10 lg[1 + (1/4)(m - 1/m)^2], m = 4 at kL = pi/26.5472 dB6.5472 dB±0.00000100 dB0 dB0.0 %
CumpleBies:5e Eq. (8.111) Expansion-chamber trough TL = 0 at kL = pi (chamber transparent)0 dB0 dB±1.00e-9 dB0 dB0.0 %
CumpleBies:5e Eq. (8.44) / Example 8.1 Quarter-wave tube tuning f = c/(4 l_e), l_e = 1.516 m -> 56.6 Hz56.6 Hz56.6 Hz±0.1 Hz0.003 Hz3.0 %
CumpleBies:5e Eq. (8.46) Helmholtz resonance f0 = (c/2pi) sqrt(S/(l_e V)) (S=1e-4, l_e=0.02, V=1e-3)122.067 Hz122.067 Hz±0.00000100 Hz0 Hz0.0 %
CumpleBies:5e Eq. (8.73) Side-branch TL = 20 lg abs(1 + rho c/(2 Sd Zb)) (QWT branch, closed form)0.1638 dB0.1638 dB±1.00e-9 dB0 dB0.0 %
CumpleBies:5e Eqs. (8.141)/(8.148) (four-pole insertion loss) Insertion loss = transmission loss for the anechoic reference Zs=Zr=rho c/S6.2498 dB (= TL)6.2498 dB±1.00e-9 dB0 dB0.0 %
CumpleBies:5e Eq. (8.275) (Wells' plenum method) Plenum TL = -10 lg[S_out(cos0/pi r^2 + (1-a)/(Sw a))] (S_out=.1,r=1,Sw=20,a=.2)12.8541 dB12.8541 dB±0.00000100 dB0 dB0.0 %
CumpleBies:5e Table 8.14 (ASHRAE end reflection, flush) Duct end reflection D = 200 mm at 125 Hz = 10 dB (table node)10 dB10 dB±0.00000100 dB0 dB0.0 %
CumpleLong:2e Eq. 13.1 with Table 13.5 nombra además ASHRAE 1987 fan model Forward-curved fan at Q_REF, P_REF, peak efficiency -> K_F + C_BFI at 500 Hz38 dB38 dB±1.00e-9 dB0 dB0.0 %
CumpleLong:2e Eq. 14.12 with Table 14.2 (Reynolds lined rectangular duct) 18 x 12 in duct, 6 ft, 1 in lining at 1 kHz -> 1.77 (10/3)^0.695 6 dB24.5203 dB24.5203 dB±1.00e-9 dB0 dB0.0 %
CumpleLong:2e Table 14.4 nombra además ASHRAE 1995 lined flexible duct 8 in diameter, 9 ft long -> 6/8/16/25/28/28/18 dB (table node)0 dB (max |diff| over the 7 bands)0 dB±1.00e-9 dB0 dB0.0 %
CumpleLong:2e Eq. 14.17 (branch power division) 25 per cent split with area-matched branches -> -10 lg 0.25 = 6.02 dB6.0206 dB6.0206 dB±1.00e-9 dB0 dB0.0 %
CumpleLong:2e Table 14.9 (worked duct-borne sheet, supply path) Fan to room, 8 octave bands -> 52/42/30/18/9/-2/-2/-1 dB at the receiver0 dB +/-1 (max |diff| over the 8 bands)1 dB±1 dB1 dB100 %
CumpleLong:2e Eqs. 13.27-13.33 (Reynolds diffuser self-noise) 24 x 24 in rectangular diffuser, 312 cfm, 0.05 in pd -> the 33/32/29/23/15 dB row of Table 14.90 dB +/-1 (max |diff| over the five bands)0.8853 dB±1 dB0.8853 dB89 %
CumpleASHRAE 2019 Applications Ch. 49 Table 9 Max neck velocity of a supply outlet for design RC(30) -> 2.2 m/s2.2 m/s2.2 m/s±1.00e-9 m/s0 m/s0.0 %
CumpleNorton & Karczub:2e Eqs. 7.6/7.8/7.9 (problem 7.1 answer) 254 mm duct, steam, 200 m/s: (1,0) cut-on 812 Hz and k_x = -8.23 1/m0 +/-1 (Hz, and 1/m x100)0.591±10.59159 %
CumpleNorton & Karczub:2e Eq. 7.10 (problem 7.2 answer) 0.65 x 0.4 m duct, 15 m/s: first three cut-on 264 / 428 / 503 Hz0 Hz (max |diff| over the 3 modes)0 Hz±1.00e-9 Hz0 Hz0.0 %
CumpleBies:5e Eqs. (7.103), (7.111) (enclosure, fully absorbing limit) Enclosure correction C -> 10 lg 0.3 = -5.23 dB as alpha_i -> 1-5.2288 dB-5.2288 dB±0.001 dB0.0000174 dB1.7 %
CumpleNorton & Karczub:2e Eq. (4.101) (problem 4.21 answer) Double brick wall into an 8 x 9 x 3 m room -> NR 37.5/40.8/49.0/62.8/65.3/65.9 dB0 dB +/-0.05 (max |diff| over the 6 bands)0.0308 dB±0.05 dB0.0308 dB62 %
CumpleNorton & Karczub:2e 4.6/4.9 (problem 4.18 answer) Blower in a plant room to the operator room -> 72.3/60.4/41.4/41.0/33.8/30.7 dB0 dB +/-0.1 (max |diff| over the 6 bands)0.0682 dB±0.1 dB0.0682 dB68 %
CumpleBarron:(2003) Example 7-6 with Eqs. (7-71) and (7-72), printed folios 297 and 298, PDF pages 309 and 310 Refiner room to an operator 1.5 m from a 16 m2 wall (inside r* = 1.596 m) -> L_p2 = 61.7 dB61.7 dB61.75 dB±0.05 dB0.047 dB94 %
CumpleNorton & Karczub:2e Eq. (4.115) (problem 4.16 answer) Lined compressor enclosure against NC-45 -> required TL 14.4/25.2/28.9/34.4/35.2/34.7/34.7/31.6 dB0 dB +/-0.15 (max |diff| over the 8 bands)0.1099 dB±0.15 dB0.1099 dB73 %
CumpleNorton & Karczub:2e Table 4.5 (constant-volume source power) Source in the intersection of two flat surfaces (Q = 4) -> +10 lg 4 = 6.02 dB6.0206 dB6.0206 dB±1.00e-9 dB0 dB0.0 %
Enclosure and cabin insulation 43/43
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleISO 11546-1:1995 Eq. (1) corroborado por ISO 11546-2:1995 Eq. (1) D_W is the difference of the two sound power determinations, and a level shift common to both leaves it alone0 dBmax absolute difference 0.000 dB over 18 bands±1.00e-12 dB0 dB0.0 %
CumpleISO 11546-1:1995 Annex C corroborado por ISO 11546-2:1995 Annex D D_WA,e of the annex equals the difference of the two A-weighted totals computed from the same assumed spectrum16.3145 dB16.3145 dB±1.00e-9 dB0 dB0.0 %
CumpleISO 11546-1:1995 Annex C corroborado por ISO 11546-2:1995 Annex D An enclosure of no insulation at all estimates exactly 0 dB, which is the sign test of the A-weighting term A_i0 dB0 dB±1.00e-12 dB0 dB0.0 %
CumpleISO 11546-2:1995 Figure C.1 The area ratio S_V/S the closed form returns puts K_2 back on the Table C.1 limit, at every absorption coefficient of Table C.20 dBmax deviation below 1e-12 dB over the 7 rows of Table C.2±1.00e-9 dB0 dB0.0 %
CumpleISO 11546-2:1995 Table C.1 Environmental correction ceiling K_2 and background margin dL of the nine columnsISO 3743-1 dL = 6 dB; ISO 3744 K2 = 2 dB; ISO 3744 dL = 6 dB; ISO 3746 K2 = 7 dB; ISO 3746 dL = 3 dB; ISO 3747 dL = 3 dB; ISO 11201 K2 = 2 dB; ISO 11201 dL = 6 dB; ISO 11202 K2 = 7 dB; ISO 11202 dL = 3 dB; ISO 11204 K2 = 7 dB; ISO 11204 dL = 6 dBISO 3743-1 dL = 6 dB; ISO 3744 K2 = 2 dB; ISO 3744 dL = 6 dB; ISO 3746 K2 = 7 dB; ISO 3746 dL = 3 dB; ISO 3747 dL = 3 dB; ISO 11201 K2 = 2 dB; ISO 11201 dL = 6 dB; ISO 11202 K2 = 7 dB; ISO 11202 dL = 3 dB; ISO 11204 K2 = 7 dB; ISO 11204 dL = 6 dB±0 dB0 dB0.0 %
CumpleISO 11546-2:1995 Table C.2 The seven room descriptions, word for word, under the mean absorption coefficient each of them is printed against7/7 rows of Table C.27/7 rows of Table C.2±000.0 %
CumpleISO 11546-2:1995 Table 1 The survey methods give an A-weighted value only, so no band quantity may be declared from themISO 3744 bands, ISO 3746 none, ISO 11202 none, ISO 11204 bandsISO 3744 bands, ISO 3746 none, ISO 11202 none, ISO 11204 bands±000.0 %
CumpleISO 11546-1:1995 Table 1 The laboratory table carries no survey-grade row, and its footnote 2 excludes the grade 3 variant of ISO 9614-1 and ISO 11204no survey row, the three reverberation rows, footnote 2 on two3/3 readings of Table 1±000.0 %
CumpleISO 11957:1996 Eq. (1) and Eq. (2) D_p and D'_p are the same subtraction, and only the method decides whether the answer carries the prime0 dBmax absolute difference 0.000 dB, D_p and D'_p±1.00e-12 dB0 dB0.0 %
CumpleISO 11957:1996 Annex A D_pA,e of the annex equals the difference of the two A-weighted totals, the same identity as the enclosure annexes19.7652 dB19.7652 dB±1.00e-12 dB0 dB0.0 %
CumpleISO 11957:1996 6.2 Cabin clearance: half a wavelength at 100 Hz is 1.715 m at 343 m/s, and the 50 Hz to 80 Hz range takes a flat 2 m100 Hz = 1.715 m; 80 Hz = 2 m; 63 Hz = 2 m; 50 Hz = 2 m100 Hz = 1.715 m; 80 Hz = 2 m; 63 Hz = 2 m; 50 Hz = 2 m±0 m0 m0.0 %
CumpleISO 11957:1996 6.4 and 7.2.1 Source-spectrum flatness: 6 dB in the 125 Hz octave, 5 dB in the 250 Hz octave and 4 dB above125 Hz = 6 dB; 250 Hz = 5 dB; 500 Hz = 4 dB125 Hz = 6 dB; 250 Hz = 5 dB; 500 Hz = 4 dB±0 dB0 dB0.0 %
CumpleISO 11957:1996 7.2.1 Source positions: at least the largest deviation of D'_p between any two positions in octave bands, three at least and six at most6 positions for a 9.5 dB spread, capped at six6 positions for 9.5 dB±000.0 %
CumpleISO 11957:1996 6.7 The internal noise level is corrected for the background only while the margin lies between 6 dB and 10 dBmargin 8 dB = 59.2506 dB; margin 15 dB = 60 dBmargin 8 dB = 59.2506 dB; margin 15 dB = 60 dB±0 dB0 dB0.0 %
CumpleISO 11957:1996 clause 10 The stated uncertainty needs a room at least 20 times the volume of the cabin, and the loudspeaker method in situ adds about 2 dBvolume ratio = 20; excess deviation = 2volume ratio = 20; excess deviation = 2±000.0 %
CumpleNPL CIRA(EXT) 009:(1996) Tables 8 to 14, PDF pp. 19 to 24, printed folios 15 to 20 The environmental correction taken from a room's printed volume and A-weighted reverberation time reproduces all 17 values measured in five real rooms17/17 (worst departure 0.08 dB)17/17 printed values of K_2A, from 1.1 dB to 8.4 dB±000.0 %
CumpleNPL CIRA(EXT) 009:(1996) Tables 9 to 14, PDF pp. 20 to 24, printed folios 16 to 20 Annex C calls a room fit for ISO 3746 exactly where the measured environmental correction stays under the 7 dB of Table C.1, in all 17 configurations17/17, reading the absorption at the upper end of each printed range17/17 verdicts that agree with the measurement±000.0 %
CumpleNPL CIRA(EXT) 009:(1996) Tables 9 to 14, PDF pp. 20 to 24, printed folios 16 to 20 At the 2 dB ceiling ISO 3744 is given, the annex agrees with 13 of the same 17 measurements, and the four it refuses are the hemi-anechoic room the report says the table of room descriptions cannot reach13 of 17, the four that differ being room A, which is hemi-anechoic and so more absorbent than the 0.5 the table stops at13 of 17, differing at A1, A2, A3, A4±000.0 %
CumpleNPL CIRA(EXT) 009:(1996) Tables 6 and 9, PDF pp. 15 and 20, printed folios 11 and 16 Room E is printed with two different boundary areas, and only the one Table 9 pairs with the volume and the reverberation time puts the annex back on the measurementall three surfaces judged as measured, from the 358 m2 of Table 93 of 3 with Table 9, and 1 of 3 with the 258 m2 Table 6 prints for the same room±000.0 %
CumpleNPL CIRA(EXT) 009:(1996) Tables 10 to 14, PDF pp. 22 to 24, printed folios 18 to 20 The estimated room absorption column of the study does not follow the study's own Eq. (3): every one of its 17 cells sits more than 0.4 dB away from it, so that column is no oracle for this library17/17 (closest approach 0.45 dB)17/17 printed cells Eq. (3) does not reach±000.0 %
CumpleHeisterkamp:(2024) Table 3, PDF p. 10, printed folio 186 The environmental correction from a mean absorption coefficient and a boundary area reproduces the six values three test engineers reached for one workroom6/6 (worst departure 0.05 dB)6/6 printed values of K_2A±000.0 %
CumpleHeisterkamp:(2024) Table 3, PDF p. 10, printed folio 186 Annex C puts the same workroom outside ISO 11202 on the first two assessments and inside it on the third, which is where their printed K_2A falls against the 7 dB of Table C.16/6, the tightest of them sitting 0.09 dB over the 7 dB ceiling6/6 verdicts that agree with the printed K_2A±000.0 %
CumpleHeisterkamp:(2024) Table 4, PDF p. 11, printed folio 187 The environmental correction taken from an absorption area measured with a reference sound source reproduces all six printed values, in two rooms and on three measurement surfaces6/6 (worst departure 0.04 dB)6/6 printed values of K_2A±000.0 %
CumpleBarron:(2003) Example 7-8, PDF pp. 321 and 323, printed folios 309 and 311 The two A-weighted totals of that example on their own, 108.4 dBA without the enclosure and 89.8 dBA with it, which is where the weighting table shows and the difference of the two hides itboth totals within the one decimal the book printswithout the enclosure 108.38 dBA, with the enclosure 89.79 dBA, worst departure 0.025 dB±0.05 dBA0.0248 dBA50 %
CumplePeters, Smith and Hollins, Acoustics and Noise Control:3rd ed Example 1.13, PDF pp. 31 and 32, printed folios 16 and 17 One enclosure, one measured band attenuation, two source spectra: the Annex D estimate gives 14 dBA against one machine and 27 dBA against the other, which is why the annex calls it an estimatemachine A = 14 dBA; machine B = 27 dBAmachine A = 13.90 dBA, machine B = 26.92 dBA, a spread of 13.0 dB±0 dBA0 dBA0.0 %
CumpleSchirmer:(2006) 10.8.1, PDF pp. 323 and 324, printed folios 303 and 304 ISO 11546-1:1995 3.16 / ISO 11546-2:1995 3.14: the leak ratio of an enclosure with a 0.25 m2 opening in 95.75 m2 of wall, taken over the interior surface with the opening counted in, against the printed q = 2.6e-3q = 2.6e-3 (+/-5e-5, half of the last digit printed)0.002604±0.000050.0000048.0 %
CumpleIFA-LSA 01-243:(2014) Anhang, Beispiele 1 and 3, PDF pp. 22, 23 and 25, printed folios 22, 23 and 25 The A-weighted insulation of two enclosures measured where they stand, at a punching machine and at an emery machine, which pins the order of the subtraction against real installationspunching machine, Beispiel 1 = 20 dB; emery machine, Beispiel 3 = 20 dBpunching machine, Beispiel 1 = 20 dB; emery machine, Beispiel 3 = 20 dB±0 dB0 dB0.0 %
CumpleISO 11957:1996 6.4 resuelto con ISO 3741:2010 9.1.2, Equation (14) and its clamps (PDF pp. 28 and 29, printed folios 19 and 20) The background correction 6.4 delegates, at the two clamp points ISO 3741 prints: 1.26 dB for a 6 dB margin and 0.46 dB for a 10 dB onethe printed 1.26 dB and 0.46 dB, to the two decimals folio 20 prints them at (+/-0.005 dB, half of that last digit)worst departure 0.0037 dB over the three bands, which re-evaluate Equation (14) at the clamped margin instead of taking the rounded constant the clause writes±0.005 dB0.0037 dB74 %
CumpleISO 11957:1996 6.4 and 6.7 resuelto con ISO 3741:2010 9.1.2 (PDF p. 29, printed folio 20) The two clauses that spend that correction: the internal noise level at the two edges of its 6 dB to 10 dB window, and the insulation of 6.480 - 1.26 and 80 - 0.46 for L_pA, and 31.26 / 30.46 / 31.26 for D_p (+/-0.005 dB, half of the last digit printed)worst departure 0.0037 dB over the five values±0.005 dB0.0037 dB74 %
CumpleISO 11957:1996 clause 8 resuelto con ISO 717-1:2013 Annex C, Table C.1 (PDF p. 24, printed folio 16) Clause 8 is ISO 717-1 with D_p written where that standard writes R, so its printed example rates 30 (-2; -3) dB on an unfavourable sum of 31.8 dBD_p,w = 30 dB; C = -2 dB; Ctr = -3 dB; unfavourable sum = 31.8 dBD_p,w = 30 dB; C = -2 dB; Ctr = -3 dB; unfavourable sum = 31.8 dB±0 dB0 dB0.0 %
CumpleISO 11957:1996 Annex A resuelto con ISO 717-1:2013 Annex C, Table C.1 (PDF p. 24, printed folio 16) The summation term of the Annex A estimate against the two printed sums, 28.308 dB and 26.859 dB, over sixteen bands eachthe printed -10 lg of the two sums, 28.308 dB and 26.859 dB. The table truncates rather than rounds, which its ellipsis says, so a correct value sits at or above each and within 0.001 dB of itdepartures +0.000551 dB and +0.000986 dB over the two spectra[0, 0.001] dB0.000986 dB97 %
CumpleISO 11957:1996 clause 8 leído vía SGS-CSTC report SDHL260400706101HI:(2026) PDF p. 3, printed folio 3 of 4 A meeting pod measured in a 200 m3 reverberation room and rated by the issuing laboratory at D_p,w = 32 dBD_p,w = 32 dB, the integer the report printsD_p,w = 32 dB on an unfavourable sum of 22.9 dB±0 dB0 dB0.0 %
CumpleISO 11957:1996 clause 8 leído vía AGH report 5.5.130.:(2023) PDF p. 10, printed folio 10 of 10 An acoustic booth measured in a 180.4 m3 reverberation room and rated by the issuing laboratory at D_p,w = 22 dBD_p,w = 22 dB, the integer the report printsD_p,w = 22 dB on an unfavourable sum of 29.7 dB±0 dB0 dB0.0 %
CumpleISO 11957:1996 clause 8 leído vía AGH report 5.5.130.680:(2017) PDF p. 11, printed folio 11 of 12 A telephone booth whose insulation is tabulated to whole decibels, rated by the issuing laboratory at D_p,w = 30 dBD_p,w = 30 dB, the integer the report printsD_p,w = 30 dB on an unfavourable sum of 23.0 dB±0 dB0 dB0.0 %
CumpleISO 11957:1996 Annex A resuelto con Barron:(2003) Example 7-8, Table 7-5, PDF pp. 319 to 323, printed folios 307 to 311 The A-weighted estimate over six octave bands: the two totals the example prints, 108.4 dBA and 89.8 dBA, are 18.6 dB apart108.4 dBA less 89.8 dBA, each printed to a tenth, so the difference carries a tenth of its own (+/-0.1 dB)18.582 dB±0.1 dB-0.018 dB18 %
CumpleBarron:(2003) Table 7-5, PDF p. 320, printed folio 308 ISO 11546-1:1995 Eq. (3): D_p band by band from the two printed sound pressure spectra, against the printed insertion loss row6/6 (worst departure 7.1e-15 dB)6/6 printed values of the insertion loss row±000.0 %
CumpleBarron:(2003) Example 7-8, PDF pp. 321 and 323, printed folios 309 and 311 ISO 11546-1:1995 Eq. (4): D_pA from the same two band spectra, against the difference of the printed 108.4 dBA and 89.8 dBA18.6 dB18.58 dB±0.1 dB-0.018 dB18 %
CumpleBarron:(2003) Example 7-8, PDF pp. 320 to 323, printed folios 308 to 311 ISO 11546-1:1995 Annex C: the estimate formed from the unenclosed spectrum and the printed insertion loss lands on the same printed difference of A-weighted levels18.6 dB18.58 dB±0.1 dB-0.018 dB18 %
CumpleBarron:(2003) Table 7-5, PDF p. 320, printed folio 308 ISO 11546-1:1995 Eq. (1): D_W from the printed sound power levels with and without the enclosure, in the five bands where the table closes on itself5/5 (worst departure 5.3e-15 dB)5/5 printed values of the insertion loss row±000.0 %
CumpleHarris:(1991) Figures A3-2 and A3-8, PDF pp. 135 and 141, printed folios 125 and 131 ISO 11546-1:1995 Annex C: the A-weighted reduction of four enclosure cases, within the decibel the book's own pairwise addition costs4/4 (worst departure 0.71 dB)4/4 printed A-weighted reductions±000.0 %
CumpleISO 717-1:2020 Annex C, Table C.1, PDF p. 23, printed folio 17 ISO 11546-1:1995 7.4 rates D_W the way ISO 717-1 rates R, and the printed calculation example reads through that pass-through unchangedrating = 30 dB; C = -2 dB; Ctr = -3 dB; unfavourable sum = 31.8 dBrating = 30 dB; C = -2 dB; Ctr = -3 dB; unfavourable sum = 31.8 dB±0 dB0 dB0.0 %
CumpleISO 80000-1:2009 Annex B, B.2 and B.3, PDF pp. 43 and 44, printed folios 35 and 36 ISO 11546-1:1995 9.4 states every result rounded to the nearest integer and names no rule; the rule this rounding follows is Rule A, the even multiple, which the annex calls generally preferable8/8 printed roundings of Annex B, two of them ties8/8 printed roundings of Annex B, two of them ties±000.0 %
CumpleSuva 66026.d:(2010) 6.2.1, PDF p. 17, printed folio 15 ISO 11546-1:1995 Eq. (2): the A-weighted total of an octave sound power spectrum, read as the insulation against a reference that carries its energy in the 1 kHz band alone104 dB, the integer the guide prints104.23 dB±0.5 dB0.226 dB45 %
In-situ measurement of silencers, screens and barriers 61/61
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleISO 11820:1996 Table 1 The stepped background correction, dB to subtract, over the eight printed rows3 dB = 3 dB; 4 dB = 2 dB; 5 dB = 2 dB; 6 dB = 1 dB; 7 dB = 1 dB; 8 dB = 1 dB; 9 dB = 0.5 dB; 10 dB = 0.5 dB3 dB = 3 dB; 4 dB = 2 dB; 5 dB = 2 dB; 6 dB = 1 dB; 7 dB = 1 dB; 8 dB = 1 dB; 9 dB = 0.5 dB; 10 dB = 0.5 dB±0 dB0 dB0.0 %
CumpleISO 11820:1996 Table 1 The printed table is a rounded version of the logarithmic subtraction and departs from it by under 0.35 dBunder 0.35 dB over the eight rowslargest departure 0.349 dB±0.35 dB0.3491 dB100 %
CumpleISO 11820:1996 Eq. (19) The transmission loss is unmoved by a level shift common to both sides of the silencer0 dBmax absolute difference 0.000 dB over 6 bands±1.00e-12 dB0 dB0.0 %
CumpleISO 11820:1996 Eqs. (20) and (22) The temperature field correction is 5 lg of the ratio of the two absolute temperatures, and vanishes when they agree0 dB0 dB±1.00e-12 dB0 dB0.0 %
CumpleISO 11820:1996 Eqs. (6), (10) and (12) A quarter of the Sabine absorption as an area, 6 ln 10 V / (c T), at the printed c = 340 m/s10.1585 m²10.1585 m²±1.00e-9 m²0 m²0.0 %
CumpleISO 11820:1996 Eqs. (15) and (16) The upstream distance is 1.5 equivalent diameters and the downstream one is 12 sqrt(S_d) less 10 sqrt(S_f)0 m0 m±1.00e-9 m0 m0.0 %
CumpleISO 11820:1996 Eq. (29) The gas density with the printed R/M = 287 for air and p_amb = 100 kPa1.1892 kg/m³1.1892 kg/m³±1.00e-9 kg/m³0 kg/m³0.0 %
CumpleISO 11820:1996 Figure 1 and 9.1.3 The twenty installations, sixteen for transmission and four for insertion, with the area rule each of them takes20/20 installations20/20 installations±000.0 %
CumpleISO 11820:1996 9.1.5 The permitted conversion folds three one-third-octave levels into their octave on the energy, and is not the fold of a level differencethe energy fold, distinct from the ISO 11691 one1/1 readings of 9.1.5±000.0 %
CumpleISO 11820:1996 9.1.5 corroborado por ISO 14163:1998 Table B.1, PDF page 47, folio 47 The three spectra of the sister standard's worked conversion fold to the 63 Hz octave levels it printssix octave levels inside the half decibel the printed integers allowworst departure 0.424 dB±0.5 dB0.4243 dB85 %
CumpleISO 11820:1996 9.1.5 corroborado por ISO 14163:1998 Table B.1, PDF page 47, folio 47 The printed octave attenuation of each spectrum, which is the difference of the two folded levels and not the fold of the differencelaboratory pink noise = 7 dB; axial fan = 12 dB; centrifugal fan = 5 dBlaboratory pink noise = 7 dB; axial fan = 12 dB; centrifugal fan = 5 dB±0 dB0 dB0.0 %
CumpleISO 11820:1996 Eq. (2) corroborado por Holgado Palacios:(2014) Tabla XL, PDF page 149, folio 121 The energy mean of six microphone positions, over the twenty-one bands of a measured silencer testall 21 bands inside the 0.05 dB the printed tenth allowsworst departure 0.049 dB±0.05 dB0.0487 dB97 %
CumpleISO 11820:1996 Eq. (21) corroborado por Holgado Palacios:(2014) Tablas LXIV to LXVI, PDF pages 173, 176 and 178, folios 145, 148 and 150 The insertion loss of three silencers measured in place, sixty-three bands of the level difference and the area termall 63 bands inside the rounding of the printed inputsworst departure 0.118 dB±0.15 dB0.1177 dB78 %
CumpleISO 11820:1996 Eqs. (17) and (18) corroborado por Barron:(2003) Table 3-4, PDF page 84, folio 72 The energy subtraction at one measuring point, over the twenty-two printed margins from 1 dB to 20 dBall 22 rows inside the 0.05 dB the printed tenth allowsworst departure 0.050 dB±0.05 dB0.0496 dB99 %
CumpleISO 11820:1996 Eqs. (17) and (18) corroborado por Bies, Hansen and Howard:(2017) Example 1.4, PDF page 65, folio 36 resuelto con Barron:(2003) Example 3-6, PDF page 85, folio 73 Two worked background subtractions at a single point, each printed to the tenth of a decibelBies 1.4, 92.0 dB over 88.0 dB = 89.8 dB; Barron 3-6, 83 dB over 77 dB = 81.7 dBBies 1.4, 92.0 dB over 88.0 dB = 89.8 dB; Barron 3-6, 83 dB over 77 dB = 81.7 dB±0 dB0 dB0.0 %
CumpleISO 11820:1996 Eqs. (2) and (5) corroborado por Barron:(2003) Example 3-4, PDF pages 77 and 78, folios 65 and 66 The energy mean of nine levels on a measurement surface, and the 10 lg (S/S0) of the 24.56 m2 that surface enclosesmean of nine levels = 80.4 dB; 10 lg (S/S0) at 24.56 m2 = 13.9 dBmean of nine levels = 80.4 dB; 10 lg (S/S0) at 24.56 m2 = 13.9 dB±0 dB0 dB0.0 %
CumpleISO 11820:1996 Eq. (5) corroborado por Barron:(2003) Example 3-3, PDF pages 72 to 74, folios 60 to 62 A sound power from a mean level, a measurement area and a field correction, all three terms together90.4 dB90.38 dB±0.05 dB-0.019 dB38 %
CumpleISO 11820:1996 Eqs. (6), (10) and (12) corroborado por Ver and Beranek:(2006) Example 4.2, PDF pages 95 and 96, folios 90 and 91 The printed Sabine absorption area of a 200 m3 room at 21.4 C, where the speed of sound is 344 m/s10.7 m²10.7097 m²±0.05 m²0.0097 m²19 %
CumpleISO 11820:1996 Eq. (5) corroborado por Ver and Beranek:(2006) Example 4.2, PDF page 96, folio 91 The decibel term that absorption area becomes, printed as the first of the five the example adds10.3 dB10.3 dB±0.05 dB-0.002 dB4.0 %
CumpleISO 11820:1996 Eqs. (6), (10) and (12) corroborado por Barron:(2003) Example 7-2, PDF pages 297 to 299, folios 285 to 287 The same area at another room and another speed of sound, against two absorption areas the example reaches by two unrelated routesboth areas inside the rounding of the printed timeworst departure 0.0257 m2±0.03 m²0.0257 m²86 %
CumpleISO 11820:1996 Eq. (29) corroborado por Barron:(2003) Examples 8-11 and 8-10, PDF pages 399 and 392, folios 387 and 380 The density of the air flowing through a muffler, at two temperatures and two ambient pressures away from the defaultsExample 8-11, air at 450 K and 140 kPa = 1.084 kg/m3; Example 8-10, air at 600 K and 110 kPa = 0.639 kg/m3Example 8-11, air at 450 K and 140 kPa = 1.084 kg/m3; Example 8-10, air at 600 K and 110 kPa = 0.639 kg/m3±0 kg/m³0 kg/m³0.0 %
CumpleISO 11820:1996 Eq. (28) corroborado por INSHT NTP 668:(2004) Ec. 2 and Ec. 3, PDF pages 3 and 4 The flow velocity a velocity pressure stands for, against the two coefficients a national guide prints for itEc. 2, density free, 1 kg/m3 = 4.43 m/s; Ec. 3, air at 20 C, 1.2 kg/m3 = 4.04 m/sEc. 2, density free, 1 kg/m3 = 4.43 m/s; Ec. 3, air at 20 C, 1.2 kg/m3 = 4.04 m/s±0 m/s0 m/s0.0 %
CumpleISO 11820:1996 Eq. (31) corroborado por VDI 2081 Blatt 2:2005-05 Tabelle 1, PDF page 12, folio 12 The mean velocity in the passages of a splitter silencer carrying 16 000 m3/h, from the face velocity and the area ratio14.81 m/s14.815 m/s±0.005 m/s0.005 m/s100 %
CumpleISO 11820:1996 Eq. (31) corroborado por Fuchs:(2013) Table 13.4, PDF page 588, folio 574 Twelve printed airway velocities of two splitter designs, at three flow rates and three housing cross-sections12/12 printed airway velocities12/12 printed airway velocities±000.0 %
CumpleISO 11820:1996 Eq. (15) corroborado por Barron:(2003) Example 5-7, PDF page 215, folio 203 The area-equivalent diameter inside the upstream distance, for the 0.810 m2 cross-section of a 900 mm square duct1.524 m1.52331 m±0.00075 m-0.00069 m92 %
CumpleISO 11821:1997 5.7 The background correction at the two ends of the 6 dB to 10 dB window1.2563 dB at 6 dB and 0.4576 dB at 10 dB1.2563 dB and 0.4576 dB±0.0005 dB0.0000251 dB5.0 %
CumpleISO 11821:1997 5.5.2 The four microphone distances are a quarter, a half, once and twice the screen height, with a floor of 1 mh/4 = 2 m; h/2 = 4 m; h = 8 m; 2h = 16 mh/4 = 2 m; h/2 = 4 m; h = 8 m; 2h = 16 m±0 m0 m0.0 %
CumpleISO 11821:1997 3.10 and 5.2.2 The directivity index is the logarithmic mean of twelve positions less the position, so a position under the mean reads positive9.6614 dB9.6614 dB±1.00e-9 dB0 dB0.0 %
CumpleISO 11821:1997 5.6.2.1 and clause 6 The impulse repeat rules and the one uncertainty number the document printsrepeats = 3; repeat again = 3; invalid = 5; deviation = 2repeats = 3; repeat again = 3; invalid = 5; deviation = 2±000.0 %
CumpleISO 11821:1997 5.8 corroborado por Barron:(2003) Table 7-6, PDF page 328, folio 316 D_p from a printed level pair, at the two octave bands the worked example prints a reduction for7.6 dB at 63 Hz and 24.2 dB at 8000 Hz7.6 dB and 24.2 dB±1.00e-12 dB0 dB0.0 %
CumpleISO 11821:1997 5.9 corroborado por Barron:(2003) Example 7-9, PDF pages 327 and 329, folios 315 and 317 D_pA from the printed A-weighted pair, 69.6 dBA without the barrier and 55.3 dBA with it14.3 dBA14.3 dBA±1.00e-12 dBA0 dBA0.0 %
CumpleISO 11821:1997 5.8 corroborado por Barron:(2003) Example 7-10, PDF pages 331 to 333, folios 319 to 321 D_p for a screen standing indoors: 92.3 dB falls to 84.0 dB in the 1000 Hz octave at the operator position8.3 dB8.3 dB±1.00e-12 dB0 dB0.0 %
CumpleISO 11821:1997 5.8 corroborado por Hansen:(2005) Example 6.23, PDF pages 325 and 326, folios 317 and 318 D_p over three octave bands, rounded to the whole decibel 7.4 c) reports it in500 Hz = 10 dB; 1000 Hz = 15 dB; 2000 Hz = 20 dB500 Hz = 10 dB; 1000 Hz = 15 dB; 2000 Hz = 20 dB±0 dB0 dB0.0 %
CumpleISO 11821:1997 5.8 corroborado por Noise Control in Industry:3e (1991), PDF page 188, folio 177 D_p from the 80 dB / 71 dB pair the worked example prints, and from the three single-path levels printed beside itscreen = 9 dB; path 1 = 15 dB; path 2 = 10 dB; path 3 = 18 dBscreen = 9 dB; path 1 = 15 dB; path 2 = 10 dB; path 3 = 18 dB±0 dB0 dB0.0 %
CumpleISO 11821:1997 5.8 corroborado por IFA-LSA 01-234:(2020) Tab. 4.5, PDF page 18, folio 18 The differences printed between neighbouring positions, band by band, less the one cell the document misprints11/11 cells of Tab. 4.511/11 cells of Tab. 4.5±000.0 %
CumpleISO 11821:1997 5.7 corroborado por Barron:(2003) Example 3-6, PDF page 85, folio 73 The corrected level at the lower edge of the window: 83 dB measured over a 77 dB background81.7 dB81.7437 dB±0.05 dB0.0437 dB87 %
CumpleISO 11821:1997 5.7 corroborado por Barron:(2003) Table 3-4, PDF page 84, folio 72 The seven rows of the printed correction table that fall inside the 6 dB to 10 dB window, to the 0.1 dB the table prints6 dB = 1.3 dB; 6.5 dB = 1.1 dB; 7 dB = 1 dB; 7.5 dB = 0.9 dB; 8 dB = 0.7 dB; 9 dB = 0.6 dB; 10 dB = 0.5 dB6 dB = 1.3 dB; 6.5 dB = 1.1 dB; 7 dB = 1 dB; 7.5 dB = 0.9 dB; 8 dB = 0.7 dB; 9 dB = 0.6 dB; 10 dB = 0.5 dB±0 dB0 dB0.0 %
CumpleISO 11821:1997 5.7 corroborado por Hansen:(2005) Example 3.25, PDF pages 154 and 155, folios 146 and 147 The corrected level at a margin of exactly 10 dB, the upper edge of the window, and at a 6.6 dB one89.5 dB at a 10 dB margin and 85.5 dB at a 6.6 dB one89.542 dB and 85.528 dB±0.05 dB0.0424 dB85 %
CumpleISO 11821:1997 5.7 corroborado por ISO 140-3:1995 6.5, PDF page 13, folio 7 The 1.3 dB that ISO 140-3 and ISO 3744:2010 8.2.3 both print for a 6 dB margin, which is where the window of 5.7 opens1.3 dB1.2563 dB±0.05 dB-0.0437 dB87 %
CumpleISO 11821:1997 3.10 corroborado por Barron:(2003) Example 3-5, PDF pages 80 and 81, folios 68 and 69 The logarithmic mean under the directivity index: 80.6 dB over ten printed levels and 81.8 dB over three of them80.6 dB over ten positions and 81.8 dB over the ring80.5857 dB and 81.7602 dB±0.05 dB0.0398 dB80 %
CumpleISO 10847:1997 Table 3 The background correction to add, over the two printed rows4 dB = -2 dB; 5 dB = -2 dB; 6 dB = -1 dB; 7 dB = -1 dB; 8 dB = -1 dB; 9 dB = -1 dB4 dB = -2 dB; 5 dB = -2 dB; 6 dB = -1 dB; 7 dB = -1 dB; 8 dB = -1 dB; 9 dB = -1 dB±0 dB0 dB0.0 %
CumpleISO 11820:1996 Table 1 corroborado por ISO 10847:1997 Table 3 The two stepped tables disagree at a 9 dB margin, so they are two tables and not one helperISO 11820 subtracts = 0.5 dB; ISO 10847 adds = -1 dBISO 11820 subtracts = 0.5 dB; ISO 10847 adds = -1 dB±0 dB0 dB0.0 %
CumpleISO 10847:1997 8.2.1 and 8.2.2 The indirect method returns exactly what the direct one returns when the receiver is of the same kind in both campaigns0 dBmax absolute difference 0.000 dB over both receiver kinds±1.00e-12 dB0 dB0.0 %
CumpleISO 10847:1997 8.2.2 Mixing a hemi-free-field receiver with a facade one moves the answer by exactly the 6 dB of the pressure doubling6 dB in every band, and the NOTE's advisorymax absolute departure 0.000 dB over the three bands±1.00e-12 dB0 dB0.0 %
CumpleISO 10847:1997 8.2.1 A source that changed output between the two campaigns is normalised away by the reference position0 dBmax absolute difference 0.000 dB for a 4 dB source gain±1.00e-12 dB0 dB0.0 %
CumpleISO 10847:1997 Table 1 The wind classes, with the upwind one existing only over short distances and read as negative4/4 readings of Table 14/4 readings of Table 1±000.0 %
CumpleISO 10847:1997 6.3.1 The short-distance ratio is strict at 0.1, the after case needs both of its two inequalities, and a geometry past 0.1 on every ratio is short0.1 exactly is not short, both halves must hold, and 0.2 and 0.5 are short1/1 readings of 6.3.1±000.0 %
CumpleISO 10847:1997 7.2.2 and 8.1.2 a) The reference microphone stands at least 1.5 m above the top edge, and higher where the 10 degree rule of the NOTE asks for more0 m0 m±1.00e-9 m0 m0.0 %
CumpleISO 10847:1997 3.10 The far field falls 6 dB per doubling for a point source and 3 dB for an incoherent line source6.02 dB and 3.01 dB, printed rounded to 6 and 36 dB and 3 dB±0.021 dB0.0206 dB98 %
CumpleCordero et al.:(2010) Tablas 1 and 2, printed folios 5 and 6 (PDF pages 5 and 6) A campaign that prints all four levels: the two insertion losses it reports to the nearest decibel, 13 dBA and 10 dBAsin ruido = 13 dBA; con ruido = 10 dBAsin ruido = 13 dBA; con ruido = 10 dBA±0 dBA0 dBA0.0 %
CumpleCordero et al.:(2010) Tablas 1 and 2, printed folios 5 and 6 (PDF pages 5 and 6) The one value that campaign prints before rounding, 9.5 dBA, for the case with the background raised at the receiver alone9.5 dBA9.5 dBA±0.05 dBA0 dBA0.0 %
CumpleLindeman:(1985) Table 8, printed folio 39 (PDF page 7) A barrier measured before it stood and after, by the direct method: the runs whose four levels are printed give the printed insertion loss2/2 (worst departure 0.000 dBA)2/2 runs within the 0.1 dB the table prints to±000.0 %
CumpleLindeman:(1985) Tables 12 and 13, printed folio 41 (PDF page 9) The same barrier by the indirect method, five runs against an equivalent site, and the mean insertion loss of 7.0 dBA the table reports6/6 (worst departure 0.020 dBA)6/6 printed values, the five runs and their mean±000.0 %
CumpleFHWA-PD-96-046 clause 6.6.3, printed folio 84 (PDF page 101) The insertion loss worked through with every level printed, 8.8 dB and 8.7 dB, once the off-model edge adjustment is applied outside8.8 dB from the 56.2 dB typed, 8.7 dB from the 56.3 dB listedlargest departure 0.000 dB±0.05 dB0 dB0.0 %
CumpleISO 80000-1:2009 Annex B, B.3 Rule A, printed folios 35 and 36 (PDF pages 43 and 44) The tie-break clause 10 c) of ISO 10847 leaves open: an exact half is reported as the even whole decibel, the rule Annex B calls preferable1 225.0 = 1220; 1 235.0 = 12401 225.0 = 1220; 1 235.0 = 1240±000.0 %
CumpleFHWA-PD-96-046 Table 3, printed folio 35 (PDF page 52) A second document classing the wind the same way, with the upwind class printed as an interval running from -1 m/s to -5 m/s9/9 readings inside the printed intervals9/9 readings inside the printed intervals±000.0 %
CumpleCEN/TS 16272-7:2015 Table 4 and 7.3.7, printed folio 14 (PDF page 15) A second committee reprinting the same background correction: the two grouped rows, the 4 dB floor and the 10 dB margin its prose asks for4/4 readings of Table 4 and its clause4/4 readings of Table 4 and its clause±000.0 %
CumpleJagniatinskis et al.:(2017) Table 1, printed folios 293 and 294 (PDF pages 5 and 6) Three insertion losses from a highway campaign that prints its before difference as one number, read at three unrelated splits of it9/9 (worst departure 0.000 dBA)9/9 readings, three printed results at three splits each±000.0 %
CumpleRodiño & Masson:(2015) Tabla 2, printed folio 7 (PDF page 7) Six printed insertion losses of a screen measured with no reference microphone, where 8.2.1 degenerates to the plain level difference6/6 (worst departure 0.000 dB)6/6 printed insertion losses, unweighted and A-weighted±000.0 %
CumpleBies:5e §4.9.2 (printed folio 201, PDF page 230) The 6 dB of C'_r read off a page outside the standard: the pressure doubling at a receiver held against a reflecting surface6 dB in every band, the 20 lg 2 of a pressure doubling as the page prints it, and the advisory of the NOTE to ISO 10847 8.2.2max absolute departure 0.000 dB over the three bands±1.00e-12 dB0 dB0.0 %
CumpleISO 10847:1997 7.2.2, NOTE The close-source height puts the reference microphone 10 degrees above the angle to the barrier top, and not 10 degrees above the ground10 degrees over the angle to the top, at four geometrieslargest departure below 1e-12 deg±1.00e-9 deg0 deg0.0 %
Spatial sound decay and prediction in workrooms 36/36
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleISO 14257:2001 Eq. (2) The free-field reference curve falls 6 dB per distance doubling and passes 11 dB under the source power at 1 mat 1 m = -11 dB; per doubling = 6.02 dBat 1 m = -11 dB; per doubling = 6.02 dB±0 dB0 dB0.0 %
CumpleISO 14257:2001 Annex C, Table C.6 EXAMPLE The Annex B correction reproduces all 66 printed values of the corrected distribution curve66/66 (worst departure 0.09 dB)66/66 printed values within the rounding of the table±000.0 %
CumpleISO 14257:2001 Annex C, Table C.6 last column The A-weighted pink-noise normalisation of Eq. (4), with the printed 6.2 dB, reproduces the eleven printed values to within 0.1 dBevery value within 0.1 dB: the printed 6.2 dB is 0.05 dB short of the sum of the printed Table 1 weights, which is what the annex normalised with, so a cell can come out one unit high in the last place and never lowworst departure 0.09 dB over 11 positions, 6 of them beyond the printed rounding and all of those high±0.1 dB0.092 dB92 %
CumpleISO 14257:2001 Eq. (4) against Annex C, Table C.6 last column and Table C.10 nombra además ISO 14257:2001 PDF page 10, printed folio 4 nombra además BS EN ISO 14257:2001 PDF page 14, printed folio 4 The 6.2 dB Eq. (4) prints is the A-weighting curve's energy sum rounded, the six weights Table 1 prints sum to 6.2515 dB, and the annex was normalised exactly: Eq. (3) under the Table 1 weights lands all fourteen printed values inside their rounding where the printed constant lands nine of them one unit high0 of 14 outside the printed rounding with the Table 1 sum, against 9 of 14 with the printed 6.2 dB, every one of the 14 high and none by a second unit0 of 14 with the sum (worst 0.045 dB, both signs); 9 of 14 with 6.2 dB (worst 0.097 dB, 0 low, 0 past one unit)±000.0 %
CumpleISO 14257:2001 Eq. (5) / Annex C, Table C.7 EXAMPLE The rate of spatial decay reproduces all 18 printed values, in three distance ranges and six octave bands18/18 (worst departure 0.05 dB)18/18 printed values of DL2 within the rounding of the table±000.0 %
CumpleISO 14257:2001 Eqs. (6) and (7) / Annex C, Table C.9 EXAMPLE The excess of sound pressure level reproduces all 18 printed values from the uncorrected curve of Table C.518/18 (worst departure 0.06 dB)18/18 printed values of DLf within the rounding of the table±000.0 %
CumpleISO 14257:2001 Annex C (C.1 against Tables C.7 and C.9) The annex applies its own Annex B correction to DL2 and not to DLf, which the two tables disagree about by more than a decibel28 of the 36 printed results leave the rounding of their own table when the other table's curve is used28 of 36, 14 in each table±000.0 %
CumpleISO 14257:2001 Eq. (5) against Eq. (8) The factor Eq. (5) prints, 0.3, is the logarithm of two rounded, which Eq. (8) prints in full one page laterlg 2 = 0.301 03the printed 0.3, which is 0.34 % smaller±0.002-0.00150 %
CumpleISO 14257:2001 Table 1 The A-weighted pink-noise spectrum weights the six octave bands the way Table 1 prints them125 Hz = -16.1 dB; 250 Hz = -8.6 dB; 500 Hz = -3.2 dB; 1 kHz = 0 dB; 2 kHz = 1.2 dB; 4 kHz = 1 dB125 Hz = -16.1 dB; 250 Hz = -8.6 dB; 500 Hz = -3.2 dB; 1 kHz = 0 dB; 2 kHz = 1.2 dB; 4 kHz = 1 dB±0 dB0 dB0.0 %
CumpleISO 14257:2001 Annex B, Eq. (B.4) A source with its acoustical centre on the floor radiates into a half space, which is 3 dB over the free fieldthe 3 dB Eq. (B.4) prints3.0103 dB±0.02 dB0.0103 dB52 %
CumpleISO 14257:2001 Annex A (PDF pages 24 and 25, printed folios 14 and 15) The limits a test source is qualified against are the ones the normative annex printsmax |DI|, dB = 8; DI tolerance to 630 Hz, dB = 2; DI tolerance from 1 kHz, dB = 8; ramp starts, Hz = 630; ramp ends, Hz = 1000; adjacent band step, dB = 8; Lw stability 100 Hz to 160 Hz, dB = 1; Lw stability 200 Hz to 5 kHz, dB = 0.5max |DI|, dB = 8; DI tolerance to 630 Hz, dB = 2; DI tolerance from 1 kHz, dB = 8; ramp starts, Hz = 630; ramp ends, Hz = 1000; adjacent band step, dB = 8; Lw stability 100 Hz to 160 Hz, dB = 1; Lw stability 200 Hz to 5 kHz, dB = 0.5±000.0 %
CumpleISO 14257:2001 C.3 (PDF page 29, printed folio 19) The source the annex declares as qualified is inside both limits it is declared against2/2, the closer of the two 1.5 dB under the 8 dB cap2/2 declared characteristics inside their limit±000.0 %
CumpleISO 14257:2001 Annex C, Table C.2 last column (PDF page 28, printed folio 18) The A-weighted sound power level of the test source is the energy sum of its six printed octave bands under the Table 1 weights115.7 dB115.7086 dB±0.05 dB0.0086 dB17 %
CumpleISO 14257:2001 Annex C, Tables C.11 and C.12 nombra además BS EN ISO 14257:2001 PDF page 34, printed folio 24 nombra además UNE-EN ISO 14257:2002 PDF page 30, printed folio 30 Equation (8) over the printed curves does not give the printed tables, and two printings print the same numbers, so the annex is inconsistent here rather than mis-set18 of the 21 printed results leave the rounding of their own table: 15 of the 18 of Table C.11 over Table C.5, up to 1.55 dB, and the 3 of Table C.12 over the last column of Table C.6. The two printings of the standard agree digit for digit, so neither is a misprint of the other18 of 21, departures from -0.41 dB to +1.55 dB with no systematic sign±000.0 %
CumpleSuva 66008.f:(2006) Tableau 2 and Figure 7 (PDF page 13, printed page 11) Equation (5) reproduces the 21 decay rates a Swiss workroom survey prints, in three distance ranges and seven columns21/21 (worst departure 0.051 dB)21/21 printed values of DL2 reproduced within 0.06 dB±000.0 %
CumpleSuva 66008.f:(2006) Tableau 2 and Figure 7 (PDF page 13, printed page 11) Equations (6) and (7) reproduce the 21 printed values of the excess over a free field from the same measured curve21/21 (worst departure 0.048 dB)21/21 printed values of DLf within the rounding of the summary±000.0 %
CumpleISO 14257:2001 Eq. (2) comparado con Suva 66008.f:(2006) Figure 7 (PDF page 13, printed page 11) The free-field reference the survey measured its excess against, recovered from its 21 printed values, is the whole sphere10 lg(4 pi) = 10.992 dB, which Eq. (2) prints as 11 dB10.988 dB, from the mean of the 21 residuals±0.02 dB-0.0045 dB22 %
CumpleISO 14257:2001 6.2 comparado con Suva 66008.f:(2006) 2.6.2 and 2.6.3 (PDF page 11, printed page 9) The three distance ranges hold every one of the 23 measurement radii the same page lists23/23 radii put in a range the printed bounds admit23/23 radii put in a range the printed bounds admit±000.0 %
CumpleIFA-LSA 01-234:(2020) Tab. 4.4 and Tab. 4.5 (PDF pages 17 and 18, printed folios 17 and 18) Equation (5) reproduces the decay rate a German guidance sheet prints for four octave bands measured at four distances4/4 (worst departure 0.036 dB)4/4 printed values of DL2 within the rounding of the table±000.0 %
CumpleIFA-LSA 01-234:(2020) Tab. 4.4 against Tab. 4.5 (PDF pages 17 and 18, printed folios 17 and 18) The 2 kHz level difference the result table prints, 4.7 dB, is not the one its own decay rate was computed fromthe printed level gives the printed 4.3 dB and the level the printed difference would need gives 4.4 dB2/2 readings the printed decay rate settles±000.0 %
CumpleProbst:(2006) Anh. 1 Tabs. 3, 6, 13 and 22 (PDF pages and printed folios 79, 82, 93 and 105) The fitting density of NOTE 3 of 6.2.2 reproduces the four values an independent VDI 3760 tool printed for surveyed workrooms4/4 (worst departure 0.00049 1/m)4/4 printed densities within half of their last printed figure±000.0 %
CumpleISO 11690-3:1998 Annex C, Table C.2 EXAMPLE The level increase at a machine's own workstation is the ISO 3744 environmental correction, which reproduces seven of the eight rows7/7 (worst departure 0.39 dB)7/7 rows within the half decibel the diagram is drawn to±000.0 %
CumpleISO 11690-3:1998 Annex C, Figure C.1 (the eighth machine) M8 needs more increase than the diagram can show, and the table prints the edge of the diagram instead12.4 dB, against the 10 dB the table prints and the 10 dB the diagram ends at12.3789 dB±0.1 dB-0.0211 dB21 %
CumpleISO 11690-3:1998 Table E.1 Each category of prediction method admits the levels of detail Table E.1 lists and refuses the rest5/5 combinations judged as printed5/5 combinations judged as printed±000.0 %
CumpleISO 11690-3:1998 4.3 comparado con ISO 14257 Annex C The middle-range decay of the worked example falls inside the 2 dB to 5 dB the guidance says to expectfive of the six octave bands, the 4 kHz one running 0.4 dB over the 5 dB top of the range 4.3 leads one to expect5 of 6 inside 2 dB to 5 dB±000.0 %
CumpleISO 11690-3:1998 Annex B, Tables B.2 to B.6 EXAMPLE (BS EN printing, printed folios 16 to 18, PDF pp. 26 to 28) Case A: what the two workstations hear once the two new machines are installed, at the positions the annex printsbeside M2 = 82.1 dB; far corner = 80.3 dBbeside M2 = 82.1 dB; far corner = 80.3 dB±0 dB0 dB0.0 %
CumpleISO 11690-3:1998 Annex B, Tables B.7 to B.9 EXAMPLE (BS EN printing, printed folio 18, PDF p. 28) Case B: the six levels printed for the two machines on offer, at the three workstation positions6/6: all but one within the 0.05 dB half step of the printed tenth (worst 0.037 dB), and the cell beside the new machine with the first choice at its recorded -0.063 dB (computed -0.0628 dB)6/6 printed levels of Table B.9±000.0 %
CumpleISO 11690-3:1998 Annex B, Figure B.1 against Tables B.5 and B.8 (BS EN printing, printed folios 16 and 18) The results of Annex B belong to the positions Figure B.1 draws, and not to the ones the two workstation tables put the same labels on12/12: the 6 cells within 0.1 dB at the positions Figure B.1 draws, and the same 6 more than 0.1 dB out at the positions Tables B.5 and B.8 tabulate (nearest 0.478 dB, farthest 1.836 dB)12/12 readings of the 6 printed cells, reproduced at the positions Figure B.1 draws and rejected at the positions Tables B.5 and B.8 tabulate±000.0 %
CumpleISO 11690-3:1998 Annex C, Table C.2 last column EXAMPLE (BS EN printing, printed folio 20, PDF p. 30) The level at a machine's own workstation rounds to the printed integer for all seven machines the diagram of Figure C.1 can showM1 = 89 dB; M2 = 84 dB; M3 = 92 dB; M4 = 83 dB; M5 = 88 dB; M6 = 84 dB; M7 = 87 dBM1 = 89 dB; M2 = 84 dB; M3 = 92 dB; M4 = 83 dB; M5 = 88 dB; M6 = 84 dB; M7 = 87 dB±0 dB0 dB0.0 %
CumpleISO 11690-3:1998 4.3 (BS EN printing, printed folios 2 and 3, PDF pp. 12 and 13) The bounds the clause prints for the two descriptors, region by region, with the five it leaves open left open12/12 bounds of 4.3, the five the clause prints no number for included12/12 bounds of 4.3, the five the clause prints no number for included±000.0 %
CumpleIFA-LSA 01-234:(2020) Tab. 4.2 (printed folio 14, PDF p. 14) The equivalent absorption area of a 6 000 m3 production hall, from the reverberation times measured in it500 Hz = 279 m²; 1 kHz = 257 m²; 2 kHz = 296 m²; 4 kHz = 391 m²500 Hz = 279 m²; 1 kHz = 257 m²; 2 kHz = 296 m²; 4 kHz = 391 m²±0 m²0 m²0.0 %
CumpleIFA-LSA 01-234:(2020) Tab. 4.2 (printed folio 14, PDF p. 14) The mean absorption coefficient of the same hall, which is that area over the 2 200 m2 of boundary the sheet works out from its dimensions500 Hz = 0.13; 1 kHz = 0.12; 2 kHz = 0.13; 4 kHz = 0.18500 Hz = 0.13; 1 kHz = 0.12; 2 kHz = 0.13; 4 kHz = 0.18±000.0 %
CumpleVer & Beranek:2e Table 7.4 and the text before it (printed folios 199 and 200, PDF pp. 203 and 204) Nine machines around one assembly bench add on a power basis to the two printed totals, and to the benefit of treating the ceiling3/3 (worst departure 0.05 dB, on the total before treatment: the nine contributions are themselves printed to 0.1 dB, so their sum can only be recovered to half a step)3/3 printed totals and the benefit printed beside them±000.0 %
CumpleBarron:(2003) Example 7-8 and Table 7-5 (printed folios 307 to 309, PDF pp. 319 to 321) The level at the operator in six octave bands, with the direct term as the statement and the worked line write it, Q/(4 pi r^2)125 Hz = 93.4 dB; 250 Hz = 98.5 dB; 500 Hz = 102.9 dB; 1 kHz = 104.6 dB; 2 kHz = 102.8 dB; 4 kHz = 95.5 dB125 Hz = 93.4 dB; 250 Hz = 98.5 dB; 500 Hz = 102.9 dB; 1 kHz = 104.6 dB; 2 kHz = 102.8 dB; 4 kHz = 95.5 dB±0 dB0 dB0.0 %
CumpleBarron:(2003) Table 7-5 against itself (printed folio 308, PDF p. 320) The room constant printed at 2 kHz is the one a mean absorption of 0.041 gives, and not the 0.043 the row above it printsthe 47.88 m2 Table 7-5 prints at 2 kHz47.88 m2 from a mean absorption of 0.041, against the 50.32 m2 the printed 0.043 gives±0.005 m²0.0032 m²64 %
CumpleBarron:(2003) Example 7-6 (printed folio 298, PDF p. 310) The level in a paper mill refiner room, from the room constant the example works out and a directivity factor of 2the 94.8 dB the example prints, for a room constant of 47.37 m294.85 dB, from the 47.37 m2 the library returns for (0.05)(900)/(1 - 0.05)±0.06 dB0.049 dB82 %
Suspended ceilings in a reverberation room (EN 16487) 12/12
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleEN 16487:2014 Table 1 nombra además BS EN 16487:2014 printed folio 14, PDF page 16 Reproducibility uncertainty of the absorption coefficient, the six printed octave bands and the weighted rating125 Hz = 0.23; 250 Hz = 0.23; 500 Hz = 0.11; 1 kHz = 0.1; 2 kHz = 0.1; 4 kHz = 0.13; alpha_w = 0.08125 Hz = 0.23; 250 Hz = 0.23; 500 Hz = 0.11; 1 kHz = 0.1; 2 kHz = 0.1; 4 kHz = 0.13; alpha_w = 0.08±000.0 %
CumpleEN 16487:2014 Table 1 NOTE (printed folio 14) comparado con ISO 12999-2:2020 Table 3 (printed folio 6) The coverage factor is the 2.8 of ISO 5725-6 for this test code and the 2.0 of Table 3 at 95 % for the general methodEN 16487 NOTE = 2.8; ISO 12999-2 Table 3 at 95 % = 2EN 16487 NOTE = 2.8; ISO 12999-2 Table 3 at 95 % = 2±000.0 %
CumpleISO 9613-1:1993 Table 1, sub-tables (i) and (j) (printed folio 9, PDF page 12) Pure-tone attenuation in dB/km at the four climates the air-absorption correction of 4.2.1 is exercised at below20/20 (worst cell 95% of its half-digit)20/20 printed cells inside half of their last printed digit±000.0 %
CumpleVigran:(2008) Eq. (4.41), printed page 122, PDF page 143 The EN ISO 354:2003 8.1.2.1 conversion between alpha and m, printed as 10 lg(e) = 4.3434.343, to the four figures the page prints4.342945±0.0005-0.00005511 %
CumpleVigran:(2008) Eq. (4.42) and the Example, printed page 123, PDF page 144 The factor of four in the air term of 4.2.1, against a printed air-absorption area of 20 m220 m2 of air absorption, from V = 100 m3 and m = 0.05 1/m20 m²±5.00e-9 m²0 m²0.0 %
CumpleCox & D'Antonio:3e Table 4.2, printed page 104, PDF page 161 The air absorption constant m at 20 degC, over the three humidity rows 4.2.2 admits24/24 (worst cell 86% of its half-digit)24/24 printed cells inside half of their own last decimal±000.0 %
CumpleEN 16487:2014 4.2.1 (printed folio 12, PDF page 14) resuelto con ISO 9613-1:1993 Table 1(i) resuelto con EN ISO 354:2003 8.1.2.1 The air-absorption correction of a 300 m3 room whose humidity moved from 50 % to 60 %, which the clause reports as over its printed capthe printed 0.05, and the room reported as over itcap 0.05, largest correction -0.10329 at 4000 Hz, reported±000.0 %
CumpleEN 16487:2014 4.2.1 (printed folio 12, PDF page 14) resuelto con ISO 9613-1:1993 Table 1(i) and 1(j) The same correction in a 200 m3 room at 90 % relative humidity, which the clause passes in silence as inside its printed capthe printed 0.05, and the room passed in silencecap 0.05, largest correction +0.03309 at 2000 Hz, not reported±000.0 %
CumpleISO 354:2003 Formulae (8) and (9) (printed folios 10 and 11, PDF pages 20 and 21 of the EN printing) nombra además EN 16487:2014 4.2.1 uses them The absorption coefficient of a type E 200 mm ceiling, from the reverberation times and climates a UKAS certificate prints6/6 (worst departure 0.0046)6/6 printed coefficients within the rounding of the certificate±000.0 %
CumpleEN 16487:2014 4.1.1.1.1 and 4.1.1.2.3.1 (printed folios 6 and 9, PDF pages 8 and 11) Four real suspended-ceiling arrangements judged against the printed 10.80 m2 and the printed 200 mm4/4 against the 10.80 m2 of 4.1.1.1.1 and the 200 mm of 4.1.1.2.3.14/4 arrangements judged as the two clauses print them±000.0 %
CumpleEN 16487:2014 4.2.2 (printed folio 12, PDF page 14) The 50 % relative humidity floor against the room climates three laboratories printed3/3 against the 50 % of 4.2.2, one of them below it3/3 printed climates judged against the floor of the clause±000.0 %
CumpleEN 16487:2014 Table 1 footnote b resuelto con EN ISO 11654:1997 4.1 and 4.2 (printed folios 2 and 3) The weighted rating and absorption class three laboratories printed for their own suspended ceilings3/3 printed alpha_w with class and indicator, and 5/5 printed alpha_p8/8 printed ratings and practical coefficients reproduced±000.0 %
Steam turbine sets (IEC 61063) 8/8
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleIEC 61063:1991 Table 2 nombra además BS EN 61063:1996 printed folio 8, PDF page 14 Correction for background noise, the nine printed rows from a difference of 3 dB to one above 10 dB3 dB = 3 dB; 4 dB = 2 dB; 5 dB = 2 dB; 6 dB = 1 dB; 7 dB = 1 dB; 8 dB = 1 dB; 9 dB = 0.5 dB; 10 dB = 0.5 dB; > 10 dB, at 11 dB = 0 dB; > 10 dB, at 10.2 dB = 0 dB3 dB = 3 dB; 4 dB = 2 dB; 5 dB = 2 dB; 6 dB = 1 dB; 7 dB = 1 dB; 8 dB = 1 dB; 9 dB = 0.5 dB; 10 dB = 0.5 dB; > 10 dB, at 11 dB = 0 dB; > 10 dB, at 10.2 dB = 0 dB±0 dB0 dB0.0 %
CumpleIEC 61063:1991 Table 1 nombra además BS EN 61063:1996 printed folio 4, PDF page 10 Standard deviation of the A-weighted sound power level by the survey method, with and without prominent discrete tonestonal = 5 dB; broadband = 4 dBtonal = 5 dB; broadband = 4 dB±0 dB0 dB0.0 %
CumpleIEC 61063:1991 7.1 nombra además BS EN 61063:1996 printed folio 7, PDF page 13 The measurement surface stands 1 m from the reference box on every side but the floorlength = 2 m; width = 2 m; height = 1 mlength = 2 m; width = 2 m; height = 1 m±0 m0 m0.0 %
CumpleIEC 61063:1991 Equation (1) nombra además BS EN 61063:1996 printed folio 7, PDF page 13 Area of the measurement surface around the large set of Figure 2 b against the exact area of the stepped surface410.1 m²410.1 m²±1.00e-9 m²0 m²0.0 %
CumpleIEC 61063:1991 Figure A.3 nombra además BS EN 61063:1996 printed folio 12, PDF page 18 The environmental correction against the formula the figure prints, K = 10 lg[1 + 4/(A/S)], across the A/S it labelsmax abs(K - 10 lg[1 + 4/(A/S)]) <= 1e-9 dB at 9 values of A/S0 dB±1.00e-9 dB0 dB0.0 %
CumpleIEC 61063:1991 Figure A.3 against A.3.3 nombra además BS EN 61063:1996 printed folios 12 and 13, PDF pages 18 and 19 The A/S at which the environmental correction reaches the 7 dB limit, against the A/S of 1 the clause restates the limit as10.997±0.5-0.0030.6 %
CumpleIEC 61063:1991 8.3 NOTE nombra además BS EN 61063:1996 printed folio 9, PDF page 15 Largest gap between the arithmetic average and Equation (2) for levels spanning 5 dB0.7 dB0.707 dB±0.05 dB0.007 dB14 %
CumpleIEC 61063:1991 4.2, 4.3, 7.2.2 and A.3.3 nombra además BS EN 61063:1996 printed folios 5, 6, 8 and 12 The background, wind, overhead and environmental limits, judged at the printed value and just past itevery limit holds at the printed value and fails past it4.2 at 3 dB = 1; 4.2 below 3 dB = 1; 4.3 below 6 m/s = 1; 4.3 at 6 m/s = 1; A.3.3 at 7 dB = 1; A.3.3 above 7 dB = 1; 7.2.2 at 1.0 dB = 1; 7.2.2 above 1.0 dB = 1±000.0 %
Control valve noise (IEC 60534-8-3) 13/13
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleIEC 60534-8-3:2010 Regime, examples 1 to 6 (Table A.1)I, II, III, IV, V, Vexample 1 = 1; example 2 = 2; example 3 = 3; example 4 = 4; example 5 = 5; example 6 = 5±000.0 %
CumpleIEC 60534-8-3:2010 Valve style modifier F_d (Eqs. (8a) to (8c))0.30.296±0.005-0.00480 %
CumpleIEC 60534-8-3:2010 Jet diameter D_j, example 1 (Eq. (9))0.012 m0.0116 m±0.0005 m-0.0004 m80 %
CumpleIEC 60534-8-3:2010 Vena contracta pressure, examples 1 to 6 (Eq. (2))example 4, the worst of the six104702 Pa±2 Pa-0.439 Pa22 %
CumpleIEC 60534-8-3:2010 Sound power W_a, examples 1 to 6 (Eq. (11))example 1 = 22.3 W; example 2 = 30.4 W; example 3 = 141.3 W; example 4 = 86.1 W; example 5 = 291.9 W; example 6 = 218.3 Wexample 1 = 22.3 W; example 2 = 30.4 W; example 3 = 141.3 W; example 4 = 86.1 W; example 5 = 291.9 W; example 6 = 218.3 W±0 W0 W0.0 %
CumpleIEC 60534-8-3:2010 Internal level at the pipe wall, examples 1 to 6 (Eq. (18))example 1 = 155.3 dB; example 2 = 156.5 dB; example 3 = 161.7 dB; example 4 = 158.8 dB; example 5 = 157 dB; example 6 = 158.4 dBexample 1 = 155.3 dB; example 2 = 156.5 dB; example 3 = 161.7 dB; example 4 = 158.8 dB; example 5 = 157 dB; example 6 = 158.4 dB±0 dB0 dB0.0 %
CumpleIEC 60534-8-3:2010 Ring and coincidence frequencies, example 7 (Eqs. (21) to (23))f_r = 7958 Hz; f_o = 2366 Hz; f_g = 1622 Hzf_r = 7958 Hz; f_o = 2366 Hz; f_g = 1622 Hz±0 Hz0 Hz0.0 %
CumpleIEC 60534-8-3:2010 Pipe transmission loss, example 7, 33 bands (Eq. (20a))band 17 at 500 Hz, the worst of 33-62.67 dB±0.1 dB-0.066 dB66 %
CumpleIEC 60534-8-3:2010 A-weighted level 1 m from the pipe wall, examples 1 to 5 (Eq. (25))example 1 = 92 dB; example 2 = 93 dB; example 3 = 98 dB; example 4 = 94 dB; example 5 = 97 dBexample 1 = 92 dB; example 2 = 93 dB; example 3 = 98 dB; example 4 = 94 dB; example 5 = 97 dB±0 dB0 dB0.0 %
CumpleIEC 60534-8-3:2010 Expander chain of Clause 7, example 6 (Eqs. (34) to (41))U_p = 190; U_R = 460; M_R = 0.96; W_mR = 47854; eta_R = 0.0009; W_aR = 42; f_pR = 920; L_piR = 151U_p = 190; U_R = 460; M_R = 0.96; W_mR = 47854; eta_R = 0.0009; W_aR = 42; f_pR = 920; L_piR = 151±000.0 %
CumpleIEC 60534-8-3:2010 A-weighted level with the expander, example 6 (Eqs. (43) and (25))94 dB(A), where the trim alone gives 9394 dB±0 dB0 dB0.0 %
CumpleIEC 60534-8-3:2010 Multistage trim substitution, example 7 (Eqs. (27) to (29))C_n = 315 from Equation (27); p_n = 2.1 x 1e6 Pa from (28a), which NOTE 3 selects because p_1/p_2 = 5 and p_n/p_2 = 1.5C_n = 315; p_n (x1e6 Pa) = 2.1; p_n/p_2 = 1.5; (28a) rather than (28b) = 1±000.0 %
CumpleIEC 60534-8-3:2010 Multipath multistage trim, example 7 (Table A.2)x = 0.334; p_vc = 1371038; F_d = 0.028; W_a = 10.3; L_pi = 156.9; f_p = 14381; L_pAe = 89x = 0.334; p_vc = 1371038; F_d = 0.028; W_a = 10.3; L_pi = 156.9; f_p = 14381; L_pAe = 89±000.0 %
Control valve noise (IEC 60534-8-4) 14/14
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleIEC 60534-8-4:2005 Flow conditions, examples 1 to 3 (5.1)Delta p = 2.0 / 3.5 / 3.5 x 1e5 Pa against 2.38 / 2.38 / 3.32 x 1e5 Pa -> turbulent, cavitating, cavitatingx_Fzp1 (p1-pv) 1 = 2.38; cavitating 1 = 0; x_Fzp1 (p1-pv) 2 = 2.38; cavitating 2 = 1; x_Fzp1 (p1-pv) 3 = 3.32; cavitating 3 = 1±000.0 %
CumpleIEC 60534-8-4:2005 Characteristic pressure ratio x_Fz and x_Fzp1 (Eqs. (3a), (3c))x_Fz = 0.2543; x_Fzp1 = 0.2386; x_Fzp1 shifted = 0.3324x_Fz = 0.2543; x_Fzp1 = 0.2386; x_Fzp1 shifted = 0.3324±000.0 %
CumpleIEC 60534-8-4:2005 Jet diameter D_j (Eq. (4))0.01758 m0.01758 m±0.00001 m1.38e-7 m2.8 %
CumpleIEC 60534-8-4:2005 Vena contracta velocity and stream power (Eqs. (5), (6))U_vc 1 = 21.772; U_vc 2 = 28.801; W_m 1 = 6018.05; W_m 2 = 14042.1U_vc 1 = 21.772; U_vc 2 = 28.801; W_m 1 = 6018.05; W_m 2 = 14042.1±000.0 %
CumpleIEC 60534-8-4:2005 Acoustical efficiencies (Eqs. (8), (9))eta_turb 1 (x1e6) = 1.555; eta_turb 2 (x1e6) = 2.057; eta_cav 2 (x1e6) = 1.243; eta_cav 3 (x1e8) = 1.992eta_turb 1 (x1e6) = 1.555; eta_turb 2 (x1e6) = 2.057; eta_cav 2 (x1e6) = 1.243; eta_cav 3 (x1e8) = 1.992±000.0 %
CumpleIEC 60534-8-4:2005 Sound power W_a, examples 1 to 3 (Eqs. (7a), (7b))example 1 = 0.0023 W; example 2 = 0.0116 W; example 3 = 0.0073 Wexample 1 = 0.0023 W; example 2 = 0.0116 W; example 3 = 0.0073 W±0 W0 W0.0 %
CumpleIEC 60534-8-4:2005 Internal level at the pipe wall, examples 1 to 3 (Eq. (10))example 1 = 149.596 dB; example 2 = 156.543 dB; example 3 = 154.532 dBexample 1 = 149.596 dB; example 2 = 156.543 dB; example 3 = 154.532 dB±0 dB0 dB0.0 %
CumpleIEC 60534-8-4:2005 Strouhal number and turbulent peak (Eqs. (11), (12))N_Str 2 = 0.399; N_Str 3 = 0.243; f_p,turb 2 = 654.35; f_p,turb 3 = 397.93N_Str 2 = 0.399; N_Str 3 = 0.243; f_p,turb 2 = 654.35; f_p,turb 3 = 397.93±000.0 %
CumpleIEC 60534-8-4:2005 Cavitating peak frequency (Eq. (13))example 2 = 1088.94 Hz; example 3 = 1973.43 Hzexample 2 = 1088.94 Hz; example 3 = 1973.43 Hz±0 Hz0 Hz0.0 %
CumpleIEC 60534-8-4:2005 Ring frequency and its transmission loss (Eqs. (14), (15))f_r = 14860.406; TL_fr = -44.71f_r = 14860.406; TL_fr = -44.71±000.0 %
CumpleIEC 60534-8-4:2005 Turbulent transmission loss, examples 1 to 3 (Eqs. (16a), (16b))example 3, the worst of the three-76.152 dB±0.01 dB0.008 dB80 %
CumpleIEC 60534-8-4:2005 Cavitating transmission loss, examples 2 and 3 (Eq. (17))example 3, the worse of the two printed rows-74.922 dB±0.1 dB0.084 dB84 %
CumpleIEC 60534-8-4:2005 Level 1 m from the pipe wall, examples 1 to 3 (Eqs. (18a), (18b))example 1 = 62.7 dB; example 2 = 81 dB; example 3 = 66.9 dBexample 1 = 62.7 dB; example 2 = 81 dB; example 3 = 66.9 dB±0 dB0 dB0.0 %
CumpleIEC 60534-8-4:2005 Frequency route at 8 kHz, examples 1 to 3 (Eqs. (19) to (22))L_pi(8k) 1 = 116.3 dB; L_pi(8k) 2 = 141.9 dB; L_pi(8k) 3 = 128 dB; TL(8k) = -51.76 dB; L_pe(8k) 1 = 51.8 dB; L_pe(8k) 2 = 77.4 dB; L_pe(8k) 3 = 63.6 dBL_pi(8k) 1 = 116.3 dB; L_pi(8k) 2 = 141.9 dB; L_pi(8k) 3 = 128 dB; TL(8k) = -51.76 dB; L_pe(8k) 1 = 51.8 dB; L_pe(8k) 2 = 77.4 dB; L_pe(8k) 3 = 63.6 dB±0 dB0 dB0.0 %
Ducted silencer measurement (ISO 7235, ISO 11691) 23/23
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleISO 11691:1995 Insertion loss by substitution (Eq. (1))50 Hz = 4 dB; 63 Hz = 7 dB; 80 Hz = 12 dB; 100 Hz = 20 dB; 125 Hz = 26 dB; 160 Hz = 28 dB50 Hz = 4 dB; 63 Hz = 7 dB; 80 Hz = 12 dB; 100 Hz = 20 dB; 125 Hz = 26 dB; 160 Hz = 28 dB±0 dB0 dB0.0 %
CumpleISO 7235:2003 Reverberation-time correction of the insertion loss (6.3)10 lg 2 = 3.010300 dB3.0103 dB±1.00e-12 dB0 dB0.0 %
CumpleISO 11691:1995 Octave from three one-third octaves (Eq. (2))-10 lg[(10^-3 + 10^-3 + 10^-0.5)/3] = 9.744 dB9.743832 dB±1.00e-12 dB0 dB0.0 %
CumpleISO 11691:1995 Bounds of the octave insertion loss (Eq. (2))between 5.000 dB and 9.771 dB9.744 dB[5, 9.771212547196624] dB9.744 dB99 %
CumpleISO 11691:1995 Reproducibility of the survey method (Table 1)50 Hz = 2 dB; 1250 Hz = 2 dB; 1600 Hz = 3 dB; 10000 Hz = 3 dB50 Hz = 2 dB; 1250 Hz = 2 dB; 1600 Hz = 3 dB; 10000 Hz = 3 dB±0 dB0 dB0.0 %
CumpleISO 7235:2003 Microphone position spread limits (Table 6)50 Hz = 10 dB; 63 Hz = 10 dB; 80 Hz = 8 dB; 100 Hz = 8 dB; 125 Hz = 7 dB; just above 125 Hz = 6 dB; 160 Hz and above = 6 dB50 Hz = 10 dB; 63 Hz = 10 dB; 80 Hz = 8 dB; 100 Hz = 8 dB; 125 Hz = 7 dB; just above 125 Hz = 6 dB; 160 Hz and above = 6 dB±0 dB0 dB0.0 %
CumpleISO 7235:2003 Three microphone positions, or five (6.2.1)at 50 Hz = 3; at 125 Hz = 5; at 1000 Hz = 5at 50 Hz = 3; at 125 Hz = 5; at 1000 Hz = 5±000.0 %
CumpleISO 7235:2003 Reproducibility of the three quantities (Table 7)insertion_loss 50 Hz = 1.5 dB; insertion_loss 250 Hz = 1 dB; insertion_loss 1000 Hz = 2 dB; insertion_loss 4000 Hz = 3 dB; transmission_loss 50 Hz = 3 dB; transmission_loss 250 Hz = 3 dB; transmission_loss 1000 Hz = 3 dB; transmission_loss 4000 Hz = 3 dB; intensity 50 Hz = 3 dB; intensity 250 Hz = 1.5 dB; intensity 1000 Hz = 1 dB; intensity 4000 Hz = 1 dBinsertion_loss 50 Hz = 1.5 dB; insertion_loss 250 Hz = 1 dB; insertion_loss 1000 Hz = 2 dB; insertion_loss 4000 Hz = 3 dB; transmission_loss 50 Hz = 3 dB; transmission_loss 250 Hz = 3 dB; transmission_loss 1000 Hz = 3 dB; transmission_loss 4000 Hz = 3 dB; intensity 50 Hz = 3 dB; intensity 250 Hz = 1.5 dB; intensity 1000 Hz = 1 dB; intensity 4000 Hz = 1 dB±0 dB0 dB0.0 %
CumpleISO 7235:2003 Expanded measurement uncertainty (7.9)250 Hz = 2 dB; 4000 Hz = 6 dB250 Hz = 2 dB; 4000 Hz = 6 dB±0 dB0 dB0.0 %
CumpleISO 11691:1995 Test duct against the silencer (4.5)lower = 0.6; upper = 1.7lower = 0.6; upper = 1.7±000.0 %
CumpleISO 7235:2003 Open-end transmission loss and reflection (B.3), (B.4)D_td = -10 lg(1 - r^2) at all 30 pairslargest disagreement below 1e-12 dB±0.000000000001 dB0 dB0.0 %
CumpleISO 7235:2003 Solid angle of radiation at the duct end (Table B.1)A (flush in a wall) = 6.2832 sr; B (wall and floor) = 3.1416 sr; C (free in the room) = 12.5664 sr; D (on the floor) = 6.2832 sr; E (mid-room duct) = 12.5664 srA (flush in a wall) = 6.2832 sr; B (wall and floor) = 3.1416 sr; C (free in the room) = 12.5664 sr; D (on the floor) = 6.2832 sr; E (mid-room duct) = 12.5664 sr±0 sr0 sr0.0 %
CumpleISO 7235:2003 Rectangular cut-on frequency (Eq. (5))343.000000 Hz from the (1, 0) eigenvalue343 Hz±1.00e-9 Hz0 Hz0.0 %
CumpleISO 7235:2003 Circular cut-on frequency (Eq. (4))0.59 / (1.8412 / pi) = 1.0067011.006702±1.00e-900.0 %
CumpleISO 7235:2003 Transmission loss of an air-terminal unit (Eq. (6))63 Hz gap = 11.2255 dB; 2000 Hz gap = 0.0525 dB63 Hz gap = 11.2255 dB; 2000 Hz gap = 0.0525 dB±0 dB0 dB0.0 %
CumpleISO 7235:2003 Normal air density (Eqs. (10), (21), (22))(101 325 + 200) / (287 x 293) = 1.207323 kg/m³1.207323 kg/m³±1.00e-12 kg/m³0 kg/m³0.0 %
CumpleISO 7235:2003 Total pressure loss across unequal ducts (Eq. (12))S_2 = S_1 = 45 Pa; S_2 = 2 S_1 = 93.6253 Pa; S_2 = S_1 / 2 = -149.5012 PaS_2 = S_1 = 45 Pa; S_2 = 2 S_1 = 93.6253 Pa; S_2 = S_1 / 2 = -149.5012 Pa±0 Pa0 Pa0.0 %
CumpleISO 7235:2003 Pressure loss coefficient is flow invariant (Eq. (14))zeta = 0.750000 at 1 m³/s0.750000 at 2 m³/s±1.00e-1200.0 %
CumpleISO 7235:2003 Averaged pressure loss coefficient (Eq. (18))2.5 - 0.4 = 2.1000002.1±1.00e-1200.0 %
CumpleISO 7235:2003 Upstream straight length (6.5.2.2.1)S = 0.0962 m² (350 mm) = 2 m; S = 0.1257 m² (400 mm) = 2 m; S = 0.5 m² = 3.9894 mS = 0.0962 m² (350 mm) = 2 m; S = 0.1257 m² (400 mm) = 2 m; S = 0.5 m² = 3.9894 m±0 m0 m0.0 %
CumpleISO 5135:1999 End reflection loss is ISO 7235 (B.3) written out (Eq. (2))ISO 5135 (2) = ISO 7235 (B.3) at all 30 pairslargest disagreement below 1e-12 dB±0.000000000001 dB0 dB0.0 %
CumpleISO 5135:1999 Sound power level in the duct (Eq. (1))63 Hz = 71.2255 dB; 125 Hz = 66.1429 dB; 250 Hz = 62.5007 dB; 500 Hz = 60.7724 dB; 1000 Hz = 60.2063 dB; 2000 Hz = 60.0525 dB63 Hz = 71.2255 dB; 125 Hz = 66.1429 dB; 250 Hz = 62.5007 dB; 500 Hz = 60.7724 dB; 1000 Hz = 60.2063 dB; 2000 Hz = 60.0525 dB±0 dB0 dB0.0 %
CumpleISO 5135:1999 Least-squares operating line (5.5.2)slope [dB/decade] = 20; level at 0.2 m³/s [dB] = 50; worst deviation [dB] = 0; lowest readable duty [m³/s] = 0.025; highest readable duty [m³/s] = 1.6slope [dB/decade] = 20; level at 0.2 m³/s [dB] = 50; worst deviation [dB] = 0; lowest readable duty [m³/s] = 0.025; highest readable duty [m³/s] = 1.6±000.0 %
HVAC noise (VDI 2081) 57/57
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleVDI 2081 Blatt 2:2005-05 Table 1, element 1 Supply fan sound power at 63 Hz, dB90.4 dB90.41 dB±0.05 dB0.006 dB12 %
CumpleVDI 2081 Blatt 2:2005-05 Table 1, element 1 Supply fan sound power at 125 Hz, dB88.8 dB88.82 dB±0.05 dB0.022 dB44 %
CumpleVDI 2081 Blatt 2:2005-05 Table 1, element 1 Supply fan sound power at 250 Hz, dB86.3 dB86.32 dB±0.05 dB0.019 dB38 %
CumpleVDI 2081 Blatt 2:2005-05 Table 1, element 1 Supply fan sound power at 500 Hz, dB82.9 dB82.91 dB±0.05 dB0.01 dB20 %
CumpleVDI 2081 Blatt 2:2005-05 Table 1, element 1 Supply fan sound power at 1000 Hz, dB78.6 dB78.59 dB±0.05 dB-0.006 dB12 %
CumpleVDI 2081 Blatt 2:2005-05 Table 1, element 1 Supply fan sound power at 2000 Hz, dB73.4 dB73.37 dB±0.05 dB-0.027 dB54 %
CumpleVDI 2081 Blatt 2:2005-05 Table 1, element 1 Supply fan sound power at 4000 Hz, dB67.2 dB67.24 dB±0.05 dB0.045 dB90 %
CumpleVDI 2081 Blatt 2:2005-05 Table 1, element 1 Supply fan sound power at 8000 Hz, dB60.2 dB60.21 dB±0.05 dB0.011 dB22 %
CumpleVDI 2081 Blatt 1:2001-07 Eq. (13) Fan sound power level L_W4 from the duty, dB96 dB96.041 dB±0.05 dB0.041 dB82 %
CumpleVDI 2081 Blatt 2:2005-05 Table 1, element 1 Supply fan total sound power level, dB94.1 dB94.124 dB±0.05 dB0.024 dB48 %
CumpleVDI 2081 Blatt 2:2005-05 Table 1, element 1 Supply fan A-weighted sound power level, dB84.5 dB84.511 dB±0.05 dB0.011 dB22 %
CumpleVDI 2081 Blatt 2:2005-05 Table 1, element 5 Rectangular duct 500 x 400 mm over 4 m, worst octave deviation, dB0 dB0 dB±0.00000100 dB0 dB0.0 %
CumpleVDI 2081 Blatt 2:2005-05 Table 1, element 13 Round duct 160 mm over 1 m, worst octave deviation, dB0 dB0 dB±0.00000100 dB0 dB0.0 %
CumpleVDI 2081 Blatt 1:2001-07 Eq. (34) Limit frequency of a 160 mm round duct, Hz1245 Hz1245.4 Hz±0.5 Hz0.403 Hz81 %
CumpleVDI 2081 Blatt 2:2005-05 Table 1, element 14 Round bend 160 mm, Table 7 shifted onto its limit frequency, worst octave deviation, dB0 dB0 dB±0.00000100 dB0 dB0.0 %
CumpleVDI 2081 Blatt 2:2005-05 Table 1, element 3 Junction into 0.3 m2 of 1.08 m2 total, dB5.6 dB5.563 dB±0.05 dB-0.037 dB74 %
CumpleVDI 2081 Blatt 2:2005-05 Table 1, element 7 Junction into 0.049 m2 of 0.147 m2 total, dB4.8 dB4.771 dB±0.05 dB-0.029 dB58 %
CumpleVDI 2081 Blatt 2:2005-05 Table 1, element 16 Junction into 0.02 m2 of 0.04 m2 total, dB3 dB3.01 dB±0.05 dB0.01 dB20 %
CumpleVDI 2081 Blatt 1:2001-07 Eq. (16) Flow noise of a straight duct, overall sound power level, dB38 dB38.31 dB±0.5 dB0.306 dB61 %
CumpleVDI 2081 Blatt 1:2001-07 Eq. (17) Flow noise of a straight duct, A-weighted sound power level, dB22 dB21.62 dB±0.5 dB-0.376 dB75 %
CumpleVDI 2081 Blatt 2:2005-05 Table 1, element 3 Junction flow noise at 63 Hz, dB39.1 dB39.09 dB±0.05 dB-0.011 dB22 %
CumpleVDI 2081 Blatt 2:2005-05 Table 1, element 3 Junction flow noise at 125 Hz, dB33.5 dB33.53 dB±0.05 dB0.031 dB62 %
CumpleVDI 2081 Blatt 2:2005-05 Table 1, element 3 Junction flow noise at 250 Hz, dB27.4 dB27.36 dB±0.05 dB-0.039 dB78 %
CumpleVDI 2081 Blatt 2:2005-05 Table 1, element 3 Junction flow noise at 500 Hz, dB20.7 dB20.72 dB±0.05 dB0.021 dB42 %
CumpleVDI 2081 Blatt 2:2005-05 Table 1, element 3 Junction flow noise at 1000 Hz, dB13.7 dB13.67 dB±0.05 dB-0.034 dB68 %
CumpleVDI 2081 Blatt 2:2005-05 Table 1, element 3 Junction flow noise at 2000 Hz, dB6.2 dB6.24 dB±0.05 dB0.038 dB76 %
CumpleVDI 2081 Blatt 2:2005-05 Table 1, element 3 Junction flow noise at 4000 Hz, dB-1.5 dB-1.53 dB±0.05 dB-0.028 dB56 %
CumpleVDI 2081 Blatt 2:2005-05 Table 1, element 3 Junction flow noise at 8000 Hz, dB-9.6 dB-9.61 dB±0.05 dB-0.006 dB12 %
CumpleVDI 2081 Blatt 2:2005-05 Table 1, element 14 Bend flow noise, worst octave deviation, dB0 dB0.0496 dB±0.05 dB0.0496 dB99 %
CumpleVDI 2081 Blatt 1:2001-07 Eq. (49) Splitter silencer self-noise, A-weighted sound power level, dB52 dB52.099 dB±0.5 dB0.099 dB20 %
CumpleVDI 2081 Blatt 2:2005-05 Table 1, element 2 Splitter silencer self-noise at 63 Hz, dB62.7 dB62.74 dB±0.05 dB0.036 dB72 %
CumpleVDI 2081 Blatt 2:2005-05 Table 1, element 2 Splitter silencer self-noise at 125 Hz, dB58.3 dB58.26 dB±0.05 dB-0.038 dB76 %
CumpleVDI 2081 Blatt 2:2005-05 Table 1, element 2 Splitter silencer self-noise at 250 Hz, dB53.7 dB53.72 dB±0.05 dB0.019 dB38 %
CumpleVDI 2081 Blatt 2:2005-05 Table 1, element 2 Splitter silencer self-noise at 500 Hz, dB49.4 dB49.39 dB±0.05 dB-0.005 dB10.0 %
CumpleVDI 2081 Blatt 2:2005-05 Table 1, element 2 Splitter silencer self-noise at 1000 Hz, dB45.4 dB45.43 dB±0.05 dB0.026 dB52 %
CumpleVDI 2081 Blatt 2:2005-05 Table 1, element 2 Splitter silencer self-noise at 2000 Hz, dB41.9 dB41.85 dB±0.05 dB-0.046 dB92 %
CumpleVDI 2081 Blatt 2:2005-05 Table 1, element 2 Splitter silencer self-noise at 4000 Hz, dB38.6 dB38.62 dB±0.05 dB0.017 dB34 %
CumpleVDI 2081 Blatt 2:2005-05 Table 1, element 2 Splitter silencer self-noise at 8000 Hz, dB35.6 dB35.56 dB±0.05 dB-0.041 dB82 %
CumpleVDI 2081 Blatt 2:2005-05 Table 2, element 18 End reflection of a 200 mm nozzle in a ceiling, worst octave deviation, dB0 dB0.0449 dB±0.05 dB0.0449 dB90 %
CumpleVDI 2081 Blatt 2:2005-05 Section 1.1 Spectral assessment correction K_A, worst octave deviation, dB0 dB0 dB±1.00e-9 dB0 dB0.0 %
CumpleVDI 2081 Blatt 2:2005-05 Table 1, elements 1 to 3 Chained level after fan, silencer and junction, worst octave deviation, dB0 dB0.0719 dB±0.1 dB0.0719 dB72 %
CumpleVDI 2081 Blatt 2:2005-05 Table 1, element 20 Room attenuation of a ceiling diffuser, worst octave deviation, dB0 dB0.0467 dB±0.05 dB0.0467 dB93 %
CumpleVDI 2081 Blatt 1:2001-07 Eq. (36) Room attenuation of a hemispherical outlet, dB5.7 dB5.675 dB±0.05 dB-0.025 dB50 %
CumpleVDI 2081 Blatt 2:2005-05 Table 1, element 20 Sound pressure level in room 102, worst octave deviation, dB0 dB0.4913 dB±0.5 dB0.4913 dB98 %
CumpleVDI 2081 Blatt 2:2005-05 Table 1, element 20 Total sound pressure level in room 102, dB51.4 dB51.384 dB±0.05 dB-0.016 dB32 %
CumpleVDI 2081 Blatt 2:2005-05 Table 1, element 20 A-weighted sound pressure level in room 102, dB40 dB40.037 dB±0.05 dB0.037 dB74 %
CumpleVDI 2081 Blatt 1:2001-07 Section 6.3, Figure 26 Reflection at a section change of ratio 0.05, dB7.4135 dB7.4135 dB±0.05 dB0 dB0.0 %
CumpleVDI 2081 Blatt 1:2001-07 Section 6.3, Figure 26 Reflection at a section change of ratio 0.1, dB4.8073 dB4.8073 dB±0.05 dB0 dB0.0 %
CumpleVDI 2081 Blatt 1:2001-07 Section 6.3, Figure 26 Reflection at a section change of ratio 0.2, dB2.5527 dB2.5527 dB±0.05 dB0 dB0.0 %
CumpleVDI 2081 Blatt 1:2001-07 Section 6.3, Figure 26 Reflection at a section change of ratio 0.5, dB0.5115 dB0.5115 dB±0.05 dB0 dB0.0 %
CumpleVDI 2081 Blatt 1:2001-07 Section 6.3, Figure 26 Reflection at a section change of ratio 1, dB0 dB0 dB±0.05 dB0 dB0.0 %
CumpleVDI 2081 Blatt 1:2001-07 Section 6.3, Figure 26 Reflection at a section change of ratio 2, dB0.5115 dB0.5115 dB±0.05 dB0 dB0.0 %
CumpleVDI 2081 Blatt 1:2001-07 Section 6.3, Figure 26 Reflection at a section change of ratio 5, dB2.5527 dB2.5527 dB±0.05 dB0 dB0.0 %
CumpleVDI 2081 Blatt 1:2001-07 Section 6.3, Figure 26 Reflection at a section change of ratio 7, dB3.5902 dB3.5902 dB±0.05 dB0 dB0.0 %
CumpleVDI 2081 Blatt 1:2001-07 Section 6.3, Figure 26 Reflection at a section change of ratio 10, dB4.8073 dB4.8073 dB±0.05 dB0 dB0.0 %
CumpleVDI 2081 Blatt 1:2001-07 Section 6.3, Figure 26 Bands a sudden increase still reflects in, of eight22±0.500.0 %
CumpleVDI 2081 Blatt 1:2001-07 Section 6.3 Ceiling VDI 3733 recommends for a section change, dB5 dB5 dB±0.05 dB0 dB0.0 %
CNOSSOS-EU railway source (Directive 2002/49/EC Annex II) 8/8
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleCIRCABC CNOSSOS-EU railway emission test set Line power of the 123 committed cases of the published test set, both source heights, 8 octave bands each, dB re 1 pW/m<= 0.01 dB on 984 published band levels (123 cases)0.0055 dB±0.01 dB0.0055 dB55 %
CumpleDirective 2002/49/EC Appendix G Tables G-1a and G-1b (roughness) Wheel roughness by brake type (3 x 32) and rail roughness by class (2 x 35), dB166 coefficients identical166/166 coefficients±000.0 %
CumpleDirective (EU) 2021/1226 Annex pt (20)(b), Table G-2 Contact filter A3 for 5 wheel load and diameter combinations x 35 wavelengths, dB175 coefficients identical175/175 coefficients±000.0 %
CumpleDirective 2002/49/EC Appendix G Table G-3 (transfer functions) Track transfer (8 x 24), wheel transfer (4 x 24) and superstructure transfer (24), dB per axle312 coefficients identical312/312 coefficients±000.0 %
CumpleDirective 2002/49/EC Appendix G Tables G-4 to G-7 Impact roughness (35), traction (5 x 2 x 24), aerodynamic (2 x 24) and bridge (2 x 24), dB371 coefficients identical371/371 coefficients±000.0 %
CumpleDirective 2002/49/EC Annex II 2.3.2, formula (2.3.15) Horizontal dipole directivity along the track: 10 lg(0.01) at phi = 0-20 dB-20 dB±1.00e-12 dB0 dB0.0 %
CumpleDirective 2002/49/EC Annex II 2.3.2, formulae (2.3.13) and (2.3.14) Aerodynamic speed law at v0 = 300 km/h reduces to Table G-6 verbatim50 lg 2 = 15.051 dB on every band0 dB±1.00e-12 dB0 dB0.0 %
CumpleDirective 2002/49/EC Annex II 2.3.2, formula (2.3.12) Impact roughness at the tabulated joint density n_l = 0.01 per mTable G-4 verbatim0 dB±1.00e-12 dB0 dB0.0 %
Railway rolling stock noise and its reference track (ISO 3095) 23/23
EstadoNormaMagnitudEsperado (norma)CalculadoLímiteDesviaciónConsumido
CumpleISO 3095:2013 Figure 2 Default upper limit of the one-third octave band rail roughness, the 22 levels printed beside the points, 40 cm to 0.315 cm, dB re 1 µm22/22 printed levels22/22 printed levels±000.0 %
CumpleEN 15610:2009 Annex B.9.2 The roughness limit as the listing types it, 22 wavelengths and levels, against the published Figure 2 limit, dB re 1 µm22/22 listed levels22/22 listed levels±000.0 %
CumpleISO 3095:2013 Figure 3 Default lower limits of the vertical and lateral track decay rates, the table beside the curves, 250 Hz to 5 kHz, dB/m28/28 printed cells28/28 printed cells±000.0 %
CumpleISO 3095:2013 7.5.1.1, Figure 10 Microphone positions of the maximum level starting test for the 42, 54, 87 and 108 m units drawn, m behind the front of the unit42 m, position 1 = -10 m; 54 m, position 1 = -10 m; 54 m, position 2 = 17 m; 87 m, position 1 = -10 m; 87 m, position 2 = 33.5 m; 108 m, position 1 = -10 m; 108 m, position 2 = 17 m; 108 m, position 3 = 44 m42 m, position 1 = -10 m; 54 m, position 1 = -10 m; 54 m, position 2 = 17 m; 87 m, position 1 = -10 m; 87 m, position 2 = 33.5 m; 108 m, position 1 = -10 m; 108 m, position 2 = 17 m; 108 m, position 3 = 44 m±0 m0 m0.0 %
CumpleISO 3095:2013 Table G.2 Result of the standstill budget, the reading plus the mean value corrections, dB55.68 dB55.68 dB±0.005 dB0 dB0.0 %
CumpleISO 3095:2013 Table G.2 Combined standard uncertainty of the standstill budget, Formula G.5, dB0.83 dB0.828 dB±0.005 dB-0.002 dB40 %
CumpleISO 3095:2013 Table G.2 Expanded uncertainty of the standstill budget, k = 2, Formula G.6, dB1.66 dB1.656 dB±0.005 dB-0.004 dB80 %
CumpleISO 3095:2013 Figure G.1 Order of the bars by share of the variance: the nine distinct shares of the thirteen inputs, largest first, each with its inputs (seven inputs tie in three groups, which the figure draws in Table G.2 order)9/9 share groups9/9 share groups±000.0 %
CumpleISO 3095:2013 Table G.1 Standard uncertainty a/√3 (Formula G.2) of the eighteen rectangular rows whose print it gives, to the printed two decimals, dB18/18 rows18/18 rows±000.0 %
CumpleISO 3095:2005 3.14, Formulae 9 and 10 Transit exposure level of a 12 s record at 84 dB over a 5 s pass-by: SEL + 10 lg(T0/Tp) against the library's L_Aeq,T + 10 lg(T/Tp), dB87.802112 dB87.802112 dB±1.00e-12 dB0 dB0.0 %
CumpleISO 3095:2013 3.14 and 6.5 L_pAeq,T of a steady 1 kHz tone of 1 Pa amplitude, where A-weighting is 0 dB: 10 lg(1/2/p0²), dB90.969 dB90.969 dB±0.02 dB0 dB0.0 %
CumpleEN 15610:2009 3.3 and 7.4.2 Band level of a 3 µm sinusoidal roughness of 1 cm wavelength on a Fourier line, Method A: 10 lg(A²/2), dB re 1 µm6.532125 dB6.532125 dB±1.00e-9 dB0 dB0.0 %
CumpleEN 15610:2009 7.4.3 resuelto con EN 61260:1995 Table 1 Bands of the Method B filter bank at 1 mm sampling within the class 0 limits of Table 1 on relative attenuation, graded up to the Nyquist wavenumber of the record, 0.5 m to 2.5 mm24/24 bands24/24 bands±000.0 %
CumpleEN 15610:2009 7.4.3 resuelto con EN 61260:1995 4.8 and Table 1 Unit sinusoids run through the Method B bank on a 40 m record sampled every millimetre, at the normalized frequencies G⁴ and G⁻⁴ map to (equation 10) about every band and at the two wavenumbers a decimated bank lets through (74.773 and 88.202 per metre): band outputs at and beyond them at least the +75 dB of class 0 below the midband tone554/554 band outputs554/554 band outputs±000.0 %
CumpleEN 15610:2009 Annex B.9.2 Bands Method B reports on a 19 m record sampled every millimetre, against wl_d, the 24 band centres the listing filters, 0.5 m to 2.5 mm24/24 bands24/24 bands±000.0 %
CumpleEN 15610:2009 7.4.3 resuelto con EN 61260:1995 Table 1 Band level of a 3 µm sinusoidal roughness at the 1 cm band centre, Method B: 10 lg(A²/2) within the ±0.15 dB of class 0 at the midband, dB re 1 µm6.532125 dB6.532125 dB±0.15 dB0 dB0.0 %
CumpleEN 15610:2009 7.4.3 Length analysed by Method B in a 20 m record, once 2 m are discarded at either end after filtering: 20 - 2 × 2, m16 m16 m±1.00e-9 m0 m0.0 %
CumpleEN 15610:2009 7.4.3 NOTE 1 The shortest record Method B analyses, 5 m: a 5 m record is analysed and one a millimetre shorter is refused2/2 records2/2 records±000.0 %
CumpleEN 15610:2009 7.4.3 A line analysed by Method B needs 15 m of record once 2 m are discarded at either end of each: a 15 m line holds, a 14.9 m one does not2/2 lines2/2 lines±000.0 %
CumpleEN 15610:2009 7.3 Curvature processing of an 11 mm pit 50 µm deep: the 0.375 m circle rests on its rims 6 mm from its middle, µm-48.003072 µm-48.003072 µm±1.00e-9 µm0 µm0.0 %
CumpleEN 15461:2008+A1:2010 Formula 1 and Annex A Decay rate of a response A(0) exp(-βx) sampled every millimetre over 150 m, against 20 lg e^β, dB/m1.9978 dB/m1.9978 dB/m±0.02%0.0000253 dB/m6.3 %
CumpleISO 3095:2013 Annex C Effect of a 3 dB exceedance in the 4 cm band at 36 km/h, carried whole onto 250 Hz, on a flat 25-band spectrum: 10 lg 25 - 10 lg(24 + 10^-0.3), dB0.087529 dB0.087529 dB±1.00e-9 dB0 dB0.0 %
CumpleISO 3095:2013 Annex D, Formula D.1 Level increase of 60 dB measured over a 55 dB background, dB1.650885 dB1.650885 dB±1.00e-12 dB0 dB0.0 %