Skip to content

environment.propagation.outdoor_propagation

Outdoor sound propagation: ISO 9613-2:1996 general method of calculation.

This part of ISO 9613 predicts octave-band attenuation of sound propagating outdoors from a point source to a receiver under conditions favourable to propagation (moderate downwind, or the equivalent moderate temperature inversion; ISO 9613-2:1996, clause 5). The equivalent-continuous downwind octave-band sound pressure level is (ISO 9613-2:1996):

with the octave-band sound power level, the directivity correction (directivity index plus a solid-angle index DOmega) and A the octave-band attenuation, itself a sum of physical mechanisms:

Implemented here are the four general terms of clause 7:

  • Adiv geometrical divergence, (Eq. (7));
  • Aatm atmospheric absorption, (Eq. (8)) with alpha the ISO 9613-1 coefficient supplied by air_absorption;
  • Agr ground effect, both the general per-region method of 7.3.1 with the Table 3 functions a'/b'/c'/d' (Eq. (9)) and the alternative simplified method of 7.3.2 (Eq. (10));
  • Abar screening by a barrier, with the Dz diffraction formula of Eq. (14) including the C2/C3 factors, the pathlength difference z (Eq. (16)/(17)), the meteorological factor Kmet (Eq. (18)) and the 20 dB (single) / 25 dB (double) limits.

The long-term average level follows from the meteorological correction Cmet (Eq. (6), (21), (22), clause 8). Amisc (foliage, industrial sites, housing; annex A) and reflections from vertical obstacles (clause 7.5) are informative and left to the caller. Accuracy of the method is stated in Table 5 (clause 9): within +/-1 dB to +/-3 dB for broadband noise up to 1000 m.

Auto-generated from the source docstrings by scripts/generate_api_docs.py (make api-docs). Do not edit by hand.

atmospheric_absorption(
distance: float,
*,
frequencies: NumericArrayLike = (63.0, 125.0, 250.0, 500.0, 1000.0, 2000.0, 4000.0, 8000.0),
temperature_c: float = 20.0,
relative_humidity_percent: float | None = None,
static_pressure_kpa: float = 101.325,
) -> NDArray[np.float64]

Attenuation due to atmospheric absorption (ISO 9613-2:1996, Eq. (8)).

with alpha the ISO 9613-1 atmospheric attenuation coefficient (here in dB/m, from air_attenuation) at each octave-band midband frequency. Eq. (8) writes alpha in dB/km with ; the two forms are identical.

alpha is evaluated at the exact base-10 midband frequency behind each nominal band label (e.g. 7 943.3 Hz for the “8 kHz” band), the convention behind the ISO 9613-2 Table 2 coefficients (they come from ISO 9613-1 Table 1 at exact midbands; at 8 kHz the nominal-frequency evaluation would run ~1.3 % high). Each supplied frequency is snapped to the nearest exact midband.

Parameters

Name Description
distance Source-to-receiver distance d, in metres.
frequencies Octave-band midband frequencies, in hertz.
temperature_c Air temperature, in degrees Celsius.
relative_humidity_percent Relative humidity, in percent (default 70).
static_pressure_kpa Atmospheric pressure, in kilopascals.

Returns: Aatm per band, in decibels.

Raises

Exception When
TypeError if distance is not a single number.
AtmosphericConditions(
*,
temperature_c: float = 20.0,
relative_humidity_percent: float | None = None,
static_pressure_kpa: float = 101.325,
)

State of the air behind the atmospheric absorption term Aatm.

The three quantities the ISO 9613-1 attenuation coefficient alpha is a function of (ISO 9613-2:1996, Eq. (8) and Table 2). The defaults are the reference conditions of the tabulated coefficients.

Parameters

Name Description
temperature_c Air temperature, in degrees Celsius.
relative_humidity_percent Relative humidity, in percent; None uses 70.
static_pressure_kpa Atmospheric pressure, in kilopascals.
Barrier(
*,
source_to_edge: float,
edge_to_receiver: float,
parallel_distance: float = 0.0,
edge_separation: float | None = None,
ground_reflections_by_image: bool = False,
lateral: bool = False,
line_of_sight_clear: bool = False,
)

Screening obstacle for the ISO 9613-2 barrier term (clause 7.4).

The barrier is described by the diffraction geometry that feeds the pathlength-difference equations (16)/(17) directly, which is the cleanest match to the Dz formula of Eq. (14).

Parameters

Name Description
source_to_edge Distance dss from the source to the (first) diffraction edge, in metres (ISO 9613-2:1996, Eq. (16)).
edge_to_receiver Distance dsr from the (second) diffraction edge to the receiver, in metres.
parallel_distance Component a of the source-receiver separation parallel to the barrier edge, in metres (0 for a purely 2-D section).
edge_separation Spacing e between the two diffraction edges for double (thick-barrier) diffraction, in metres; None selects single diffraction (Eq. (16), ). When given, Eq. (17) and the C3 factor of Eq. (15) are used with the 25 dB limit.
ground_reflections_by_image When True the ground reflections are assumed to be handled separately by image sources, so ; otherwise (Eq. (14)).
lateral When True the diffraction is around a vertical edge (Eq. (13)): (the ground term is not cancelled) and . Default False selects top-edge diffraction (Eq. (12)).
line_of_sight_clear When True the line of sight between source and receiver passes above the top edge: ISO 9613-2:1996 (text after Eq. (16)) then gives the path difference z a negative sign, and Eq. (14) is still evaluated (with , Eq. (18)), so Dz falls continuously from dB at grazing to 0 for deeper geometries. The edge distances stay the unsigned geometric lengths; only the sign convention of z changes.

property

Whether double diffraction (Eq. (17)/(15)) applies (e given).

barrier_attenuation(
barrier: Barrier,
distance: float,
frequencies: NumericArrayLike = (63.0, 125.0, 250.0, 500.0, 1000.0, 2000.0, 4000.0, 8000.0),
) -> NDArray[np.float64]

Barrier diffraction attenuation Dz (ISO 9613-2:1996, Eq. (14)).

with (or 40 when ground reflections are handled by image sources), for single diffraction or Eq. (15) for double, the pathlength difference z (Eq. (16)/(17)), and the meteorological factor Kmet (Eq. (18), 1 for ). Dz is limited to 20 dB (single) or 25 dB (double). When the line of sight passes above the top edge (Barrier(line_of_sight_clear=True)) z takes a negative sign (ISO 9613-2:1996, text after Eq. (16)) and Eq. (14) still applies: Dz falls continuously from dB at grazing () towards 0 as the clearance deepens, clamped at 0 (the logarithm’s argument is floored at 1: a barrier below the sight line never amplifies).

Parameters

Name Description
barrier Barrier geometry (Barrier).
distance Straight-line source-to-receiver distance d, in metres.
frequencies Octave-band midband frequencies, in hertz.

Returns: Dz per band, in decibels (>= 0).

Raises

Exception When
ValueError If distance or any frequency is not positive.
TypeError if distance is not a single number, or frequencies holds a text or a value that is not a real number.

Constant (tuple).

DEFAULT_FREQUENCIES_HZ = (63.0, 125.0, 250.0, 500.0, 1000.0, 2000.0, 4000.0, 8000.0)
directivity_omega(
source_height_m: float,
receiver_height_m: float,
projected_distance: float,
) -> float

Solid-angle directivity index DOmega (ISO 9613-2:1996, Eq. (11)).

Accounts for the apparent increase in source power from ground reflection near the source when the alternative ground method (Eq. (10)) is used:

Parameters

Name Description
source_height_m Source height hs, in metres.
receiver_height_m Receiver height hr, in metres.
projected_distance Ground-plane projected distance dp, in metres.

Returns: DOmega, in decibels (0 to ~3 dB).

Raises

Exception When
TypeError if projected_distance, receiver_height_m or source_height_m is not a single number.
DirectivityCorrection(*, index: float = 0.0, d_omega: float = 0.0)

Directivity correction (Eq. (3)).

The two terms the standard adds to the sound power level of a point source: the directivity index of the source itself and the solid-angle index of the space it radiates into. Both are zero for an omnidirectional source radiating into free space.

Parameters

Name Description
index Source directivity index Di, in decibels.
d_omega Solid-angle index DOmega, in decibels (see directivity_omega for the alternative ground method).
geometric_divergence(distance: float) -> float

Attenuation due to geometrical divergence (ISO 9613-2:1996, Eq. (7)).

Spherical spreading in the free field from a point source:

The +11 () sets the sound pressure level at the reference distance m from an omnidirectional point source (Note 7).

Parameters

Name Description
distance Straight-line source-to-receiver distance d, in metres.

Returns: Adiv, in decibels (51 dB at 100 m, 11 dB at 1 m).

Raises

Exception When
ValueError If distance is not positive.
TypeError if distance is not a single number.
ground_attenuation(
distance: float,
source_height_m: float,
receiver_height_m: float,
*,
frequencies: NumericArrayLike = (63.0, 125.0, 250.0, 500.0, 1000.0, 2000.0, 4000.0, 8000.0),
ground_source: float = 0.0,
ground_middle: float = 0.0,
ground_receiver: float = 0.0,
projected_distance: float | None = None,
) -> NDArray[np.float64]

Ground attenuation by the general per-region method (7.3.1, Eq. (9)).

(source, receiver and middle regions), each evaluated with the Table 3 expressions and its ground factor G (0 = hard, 1 = porous, in between = porous fraction). For the source region and ; for the receiver region and (Table 3, note 1). The middle-region term uses the overlap factor q of note 2:

with at 63 Hz and above.

Parameters

Name Description
distance Straight-line source-to-receiver distance d, in metres.
source_height_m Source height hs above ground, in metres.
receiver_height_m Receiver height hr above ground, in metres.
frequencies Octave-band midband frequencies, in hertz. Table 3 is defined for the eight nominal octave bands 63 Hz-8 kHz only; any other requested frequency is snapped to the nearest nominal octave band for the Table 3 lookup.
ground_source Ground factor Gs of the source region ([0, 1]).
ground_middle Ground factor Gm of the middle region ([0, 1]).
ground_receiver Ground factor Gr of the receiver region ([0, 1]).
projected_distance Ground-plane projected distance dp, in metres; defaults to .

Returns: Agr per band, in decibels (negative denotes a net gain).

Raises

Exception When
ValueError If a ground factor is outside [0, 1], distance is not positive, a height is negative, or a frequency is not positive.
TypeError if distance, ground_middle, ground_receiver, ground_source, receiver_height_m or source_height_m is not a single number, or frequencies holds a text or a value that is not a real number.
ground_attenuation_alternative(
distance: float,
mean_height_m: float,
) -> float

Ground attenuation by the alternative A-weighted method (7.3.2, Eq. (10)).

Valid only when the A-weighted receiver level alone is of interest, the sound propagates over porous or mostly-porous ground and is not a pure tone (ISO 9613-2:1996, 7.3.2):

Negative results are replaced by zero. When this method is used, add the solid-angle index directivity_omega (Eq. (11)) to Dc in Eq. (3).

Parameters

Name Description
distance Source-to-receiver distance d, in metres.
mean_height_m Mean height hm of the propagation path above the ground (, figure 3), in metres.

Returns: Agr, in decibels (>= 0).

Raises

Exception When
ValueError If distance is not positive.
TypeError if distance or mean_height_m is not a single number.
GroundFactors(
*,
source: float = 0.0,
middle: float = 0.0,
receiver: float = 0.0,
)

Ground factors G of the three regions (ISO 9613-2:1996, clause 7.3.1).

The general ground method splits the path into a source region, a middle region and a receiver region, each with its own factor between 0 (hard ground: paving, water, ice, compacted ground) and 1 (porous ground: grass, trees, farmland). The default is hard ground throughout.

Parameters

Name Description
source Ground factor Gs of the source region ([0, 1]).
middle Ground factor Gm of the middle region ([0, 1]).
receiver Ground factor Gr of the receiver region ([0, 1]).
mean_path_height(
profile_distances: NumericArrayLike,
profile_heights_m: NumericArrayLike,
source_height_m: float,
receiver_height_m: float,
distance: float | None = None,
) -> float

Mean height hm of the propagation path above the ground (Figure 3).

The alternative ground method of ISO 9613-2:1996, 7.3.2 is written in one quantity the standard defines by a drawing: , with F the area between the straight source-to-receiver ray and the ground beneath it (Figure 3). This computes that area for a ground given as a polyline, which is the shape a terrain model reduces to once it is cut along the vertical plane through source and receiver.

Source and receiver stand on the two ends of the profile, so the ray runs from to and the profile fixes both the ground-projected length and the height difference the slant distance is built from.

Parameters

Name Description
profile_distances Ground-projected distance of each profile point from the source, in metres, strictly increasing.
profile_heights_m Ground height at each profile point, in metres, on any one datum (only differences are used).
source_height_m Source height hs above the ground at the first profile point, in metres.
receiver_height_m Receiver height hr above the ground at the last profile point, in metres.
distance Source-to-receiver distance d to divide the area by, in metres; None takes the slant distance the profile implies.

Returns: hm, in metres.

Raises

Exception When
ValueError If the two sequences disagree in length, describe fewer than two points, the distances are not strictly increasing, source_height_m or receiver_height_m is negative or not finite, or distance is not positive and finite. The profile heights themselves are unrestricted: they are read on any datum, so a ground below it is a negative number rather than a mistake.
TypeError if receiver_height_m or source_height_m is not a single number, or profile_distances or profile_heights_m holds a text or a value that is not a real number. distance is refused the same way when it is not one real number.
meteorological_correction(
projected_distance: float,
source_height_m: float,
receiver_height_m: float,
c0: float,
) -> float

Meteorological correction Cmet (ISO 9613-2:1996, Eq. (21)/(22)).

C0 (dB) reflects local wind and temperature-gradient statistics; practical values lie in 0..~5 dB (note 22). Subtract Cmet from LAT(DW) for the long-term average level (Eq. (6)).

Parameters

Name Description
projected_distance Ground-plane projected distance dp, in metres.
source_height_m Source height hs, in metres.
receiver_height_m Receiver height hr, in metres.
c0 Meteorological factor C0, in decibels.

Returns: Cmet, in decibels (>= 0 for ).

Raises

Exception When
TypeError if c0, projected_distance, receiver_height_m or source_height_m is not a single number.
outdoor_propagation_attenuation(
distance: float,
source_height_m: float,
receiver_height_m: float,
*,
frequencies: NumericArrayLike = (63.0, 125.0, 250.0, 500.0, 1000.0, 2000.0, 4000.0, 8000.0),
ground_source: float = 0.0,
ground_middle: float = 0.0,
ground_receiver: float = 0.0,
barrier: Barrier | None = None,
temperature_c: float = 20.0,
relative_humidity_percent: float | None = None,
static_pressure_kpa: float = 101.325,
projected_distance: float | None = None,
) -> OutdoorAttenuation

Total octave-band outdoor attenuation (ISO 9613-2:1996, Eq. (4)).

Assembles the four general terms of clause 7 into (the informative Amisc is omitted). The ground effect uses the general per-region method (7.3.1). With a barrier, the top-edge insertion loss (Eq. (12)) folds the ground effect of the screened path into Dz (note 13); for a lateral (vertical-edge) barrier (Eq. (13)) and the ground term is retained.

Parameters

Name Description
distance Straight-line source-to-receiver distance d, in metres.
source_height_m Source height hs above ground, in metres.
receiver_height_m Receiver height hr above ground, in metres.
frequencies Octave-band midband frequencies, in hertz. The ground term snaps each frequency to the nearest nominal octave band (Table 3 is octave-band only) and the atmospheric term evaluates the exact base-10 midband behind it (see atmospheric_absorption).
ground_source Ground factor Gs of the source region ([0, 1], 0 = hard, 1 = porous).
ground_middle Ground factor Gm of the middle region ([0, 1]).
ground_receiver Ground factor Gr of the receiver region ([0, 1]).
barrier Optional screening obstacle (Barrier).
temperature_c Air temperature, in degrees Celsius.
relative_humidity_percent Relative humidity, in percent (default 70).
static_pressure_kpa Atmospheric pressure, in kilopascals.
projected_distance Ground-plane projected distance dp, in metres; defaults to .

Returns: OutdoorAttenuation with the per-band term breakdown.

Raises

Exception When
ValueError If distance is not positive.
TypeError if distance, ground_middle, ground_receiver or ground_source is not a single number, or frequencies holds a text or a value that is not a real number.
OutdoorAttenuation(
frequencies: NDArray[np.float64],
a_div: NDArray[np.float64],
a_atm: NDArray[np.float64],
a_gr: NDArray[np.float64],
a_bar: NDArray[np.float64],
a_total: NDArray[np.float64],
d_omega: NDArray[np.float64],
)

Per-octave-band ISO 9613-2 attenuation breakdown (clause 7).

Every array is aligned with frequencies. The terms sum, band by band, to a_total (ISO 9613-2:1996, Eq. (4) without the informative Amisc), so users can see the divergence, atmospheric, ground and barrier contributions separately.

Attributes

Name Description
frequencies Nominal octave-band midband frequencies, in hertz.
a_div Geometrical divergence Adiv (Eq. (7)), in dB, per band (identical across bands).
a_atm Atmospheric absorption Aatm (Eq. (8)), in dB, per band.
a_gr Ground effect Agr (Eq. (9) or (10)), in dB, per band. A negative value denotes a net gain from ground reflection.
a_bar Screening Abar (Eq. (12)/(13)), in dB, per band (>= 0).
a_total Total attenuation A (Eq. (4)), in dB, per band.
d_omega Solid-angle directivity index DOmega (Eq. (11)), in dB; non-zero only for the alternative ground method of 7.3.2.
OutdoorAttenuation.plot(
ax: Axes | None = None,
*,
language: Literal['en', 'es'] = 'en',
**kwargs: Any,
) -> Axes

Plot the stacked per-band attenuation terms with the total.

Requires matplotlib (the [plot] extra); returns the Axes.

Parameters

Name Description
language The language of the labels: "en" or "es".
OutdoorAttenuation.report(
path: str | os.PathLike[str],
*,
metadata: ReportMetadata | None = None,
engine: Literal['reportlab'] = 'reportlab',
verbose: bool = False,
language: Literal['en', 'es'] = 'en',
source_emission: SourceEmission | None = None,
) -> str

Render a one-page ISO 9613-2 outdoor-propagation prediction fiche.

Writes a prediction sheet (clearly labelled a prediction, not a measurement) laid out like an environmental-noise propagation calculation: the standard-basis line naming ISO 9613-2:1996 (general method, conditions favourable to propagation), an optional metadata header (source/situation, client, receiver position, meteorological conditions, date), a per-band table of the attenuation terms (Adiv, Aatm, Agr, Abar and the total A) and the attenuation-breakdown plot, closed by a boxed single result and a footer identity/disclaimer block.

When a source_emission is supplied, the fiche also lists the source power level Lw and the composed downwind level LfT(DW) per band and boxes the A-weighted downwind level LAT(DW) at the receiver, with an optional PASS/FAIL verdict against a declared limit level (a lower level is better). Without it the fiche boxes the octave-band range of the total attenuation A.

Parameters

Name Description
path Destination path of the PDF file.
metadata Optional ReportMetadata supplying the header identity (specimen the source/situation, client, test_room the receiver position), the temperature_c / relative_humidity_percent / static_pressure_kpa conditions and the footer identity. A supplied requirement is read as the maximum acceptable A-weighted downwind level in dB (used only when a source_emission is given).
engine Rendering back end; only "reportlab" is supported.
verbose When True and a source_emission is supplied, the per-band table adds the A-weighted band level (LfT(DW) plus the band A-weighting), whose energy sum is the boxed LAT(DW).
language Fiche language: "en" (default) or "es".
source_emission Optional SourceEmission (the source sound power Lw and directivity, plus an optional meteorological correction) that turns the attenuation breakdown into the boxed A-weighted downwind level at the receiver.

Returns: The written path as a str.

Raises

Exception When
ValueError If engine is not "reportlab", language is unknown, or a supplied source_emission sound power does not match the number of frequency bands.
ImportError If reportlab or matplotlib is not installed (the [report] and [plot] extras).
predicted_receiver_level(
sound_power_level: NumericArrayLike,
geometry: PropagationGeometry,
*,
frequencies: NumericArrayLike = (63.0, 125.0, 250.0, 500.0, 1000.0, 2000.0, 4000.0, 8000.0),
ground: GroundFactors | None = None,
barrier: Barrier | None = None,
atmosphere: AtmosphericConditions | None = None,
directivity: DirectivityCorrection | None = None,
c0: float | None = None,
) -> NDArray[np.float64]

Predicted octave-band receiver level (ISO 9613-2:1996, Eq. (3)/(6)).

Composes the downwind octave-band sound pressure level:

from the total attenuation outdoor_propagation_attenuation. When c0 is given, the meteorological correction Cmet (Eq. (21)/(22)) is subtracted band by band to approximate the long-term average level LfT(LT) (Eq. (6)); the standard applies Cmet to the A-weighted level, so this is a per-band convenience.

Parameters

Name Description
sound_power_level Octave-band sound power level Lw, in decibels (re 1 pW), one value per frequency.
geometry Source-to-receiver geometry of the path (PropagationGeometry): the distance d, the two heights and the optional projected distance dp.
frequencies Octave-band midband frequencies, in hertz.
ground Ground factors of the three regions (GroundFactors); None is hard ground throughout.
barrier Optional screening obstacle (Barrier).
atmosphere Air temperature, humidity and pressure behind the atmospheric absorption term (AtmosphericConditions); None is the reference air of the tabulated coefficients.
directivity Directivity correction Dc = Di + DOmega (DirectivityCorrection); None is an omnidirectional source in free space ().
c0 Meteorological factor C0, in decibels; None returns the downwind level LfT(DW) ().

Returns: Predicted octave-band level per frequency, in decibels.

Raises

Exception When
TypeError if sound_power_level holds a text or a value that is not a real number.
PropagationGeometry(
*,
distance: float,
source_height_m: float,
receiver_height_m: float,
projected_distance: float | None = None,
)

Source-to-receiver geometry of the propagation path (ISO 9613-2:1996).

The three lengths every term of the method needs: the straight-line distance d of the divergence and atmospheric terms (Eq. (7)/(8)), and the two heights above the ground the ground effect of clause 7.3.1 and the meteorological correction of clause 8 are written in.

Parameters

Name Description
distance Straight-line source-to-receiver distance d, in metres.
source_height_m Source height hs above ground, in metres.
receiver_height_m Receiver height hr above ground, in metres.
projected_distance Ground-plane projected distance dp, in metres; None defaults to .
region_ground_factors(
segment_lengths: NumericArrayLike,
segment_ground_factors: NumericArrayLike,
source_height_m: float,
receiver_height_m: float,
) -> GroundFactors

Ground factors of the three regions from a path crossing several grounds.

ISO 9613-2:1996, 7.3.1 splits the ground projection of the path into a source region 30 long, a receiver region 30 long and whatever middle region is left between them, and asks for one ground factor per region. Where the path runs over ground of more than one kind, the standard does not say how to reduce the several factors to the three the method wants. ISO/TR 17534-3:2015, 6.2.5 settles it for quality-assured software: each region takes the mean of G weighted by the length of the ground projection it covers.

The ground projection of the path is the concatenation of the segments, so is their total length; give the segments in order from the source.

Parameters

Name Description
segment_lengths Length of each segment of the ground projection, in metres, ordered from the source; each must be positive.
segment_ground_factors Ground factor G of each segment ([0, 1]), aligned with segment_lengths.
source_height_m Source height hs above ground, in metres.
receiver_height_m Receiver height hr above ground, in metres.

Returns: The GroundFactors of the source, middle and receiver regions.

Raises

Exception When
ValueError If the two sequences disagree in length or are empty, a length is not positive, a factor is outside [0, 1], or a height is negative or not finite.
TypeError if receiver_height_m or source_height_m is not a single number, or segment_ground_factors or segment_lengths holds a text or a value that is not a real number.
SourceEmission(
*,
sound_power_level: NumericArrayLike,
directivity_index: float = 0.0,
d_omega: float = 0.0,
cmet: float | None = None,
)

Source emission terms for the ISO 9613-2 downwind receiver level (Eq. (3)).

Passed to OutdoorAttenuation.report so the prediction fiche can box the A-weighted downwind level at the receiver from an octave-band attenuation breakdown. The level is composed as with the directivity correction (ISO 9613-2:1996, Eq. (3)); an optional meteorological correction cmet is subtracted for the long-term average level (Eq. (6)).

This report-time object keeps the emission out of outdoor_propagation_attenuation (which stays purely an attenuation calculation), so the receiver level is a presentation concern of the fiche.

Parameters

Name Description
sound_power_level Octave-band source sound power level Lw (dB re 1 pW), one value per band of the attenuation result.
directivity_index Source directivity index Di, in decibels.
d_omega Solid-angle index DOmega, in decibels (see directivity_omega for the alternative ground method).
cmet Optional meteorological correction Cmet (dB), obtained from meteorological_correction; None reports the downwind level LfT(DW) directly ().