# Errata in ISO 3745

> One page of the phonometry documentation, as Markdown. Index: https://docs.jmrp.io/phonometry/llms.txt

Canonical: https://docs.jmrp.io/phonometry/reference/errata/iso-3745/
Language: en
Alternate: https://docs.jmrp.io/phonometry/es/reference/errata/iso-3745/index.md
Version: phonometry 4.0.0
Install: pip install "phonometry[full]"
Author: José Manuel Requena Plens (https://orcid.org/0000-0003-1250-6212)
Published: 2026-10-28
Updated: 2026-10-28T03:12:25Z
License: MIT (https://github.com/jmrplens/phonometry/blob/main/LICENSE)
Summary: Errata in ISO 3745: 1 defect in the printed text, with the evidence and what phonometry does about it.

---

This is the entry of the [errata registry](https://docs.jmrp.io/phonometry/reference/errata/) on ISO 3745:2012/Amd.1:2017. The registry's introduction says how each claim is checked against the printed page and what the status of an entry means.

## ISO 3745:2012/Amd.1:2017, A.2.4 against A.4.3 (two spatial resolutions for one traverse)

- **Location:** A.2.4 of the replacement Annex A (PDF page 7, printed p. 3)
  and A.4.3 of the same annex (PDF page 9, printed p. 5) of
  ISO 3745:2012/Amd.1:2017, read against ISO 26101:2017, A.4.3 (PDF page 17,
  printed p. 11).
- **The print:** A.2.4 says "Within each qualified radius, each microphone
  traverse shall meet the requirements for traverse length of
  ISO 26101:2017, 5.1.4.3 and for spatial resolution of ISO 26101:2017,
  A.4.3." ISO 26101:2017 A.4.3 says "The spacing shall not exceed one-tenth
  of a wavelength at each frequency of interest below 1 kHz and shall not
  exceed 25 mm at frequencies above 1 kHz." The amendment's own A.4.3 says
  "The spacing between points shall not exceed a tenth of a wavelength at each
  frequency of interest below 250 Hz and shall not exceed 100 mm at
  frequencies above 250 Hz", and its last paragraph goes on to recommend
  further points "If a 100 mm spatial resolution traverse indicates" a
  deviation within 10 % of the criterion.
- **The problem:** the annex sets two spatial resolutions for the same
  traverse, both with "shall". Between 250 Hz and 1 kHz the tenth of a
  wavelength of ISO 26101 (137 mm to 34 mm at 343 m/s) is looser than 100 mm
  down to 343 Hz and tighter above it, and above 1 kHz ISO 26101 asks for
  25 mm where A.4.3 allows 100 mm. A traverse sampled at the 100 mm that
  A.4.3 permits, and that its last paragraph presupposes, fails the resolution
  A.2.4 requires at every frequency above 343 Hz. The 2012 annex had a single
  rule. Which of the two the amendment intends cannot be settled from its
  text.
- **Evidence:** Verified on PDF page 7 (printed p. 3) and PDF page 9 (printed
  p. 5) of ISO 3745:2012/Amd.1:2017, and on PDF page 17 (printed p. 11) of
  ISO 26101:2017.
- **Library behaviour:** `check_free_field` judges both and reports each on
  its own: `spacing_met` holds the amended A.4.3 and `iso26101_spacing_met`
  the ISO 26101 A.4.3 that A.2.4 cites, and `passes` asks for both, since both
  are printed as requirements. A laboratory that reads A.4.3 as the rule of
  the annex sees the second flag false and the first true.
  `tests/emission/test_free_field_qualification.py` pins a 100 mm traverse
  that meets A.4.3 above 250 Hz and fails ISO 26101 A.4.3 at every band above
  343 Hz.
- **Status:** unreported.
