# Errata in ISO/TR 17534

> One page of the phonometry documentation, as Markdown. Index: https://docs.jmrp.io/phonometry/llms.txt

Canonical: https://docs.jmrp.io/phonometry/reference/errata/iso-17534/
Language: en
Alternate: https://docs.jmrp.io/phonometry/es/reference/errata/iso-17534/index.md
Version: phonometry 4.0.0
Install: pip install "phonometry[full]"
Author: José Manuel Requena Plens (https://orcid.org/0000-0003-1250-6212)
Published: 2026-10-28
Updated: 2026-11-16T21:36:14Z
License: MIT (https://github.com/jmrplens/phonometry/blob/main/LICENSE)
Summary: Errata in ISO/TR 17534: 2 defects in the printed text, with the evidence and what phonometry does about each.

---

These are the 2 entries of the [errata registry](https://docs.jmrp.io/phonometry/reference/errata/) on ISO/TR 17534-3:2015, in the order the registry lists them. The registry's introduction says how each claim is checked against the printed page and what the status of an entry means.

## ISO/TR 17534-3:2015, Table 20 (q credited to the wrong footnote of ISO 9613-2 Table 3)

- **Location:** Table 20, "Single number step by step results" of test case
  T08, the row naming the middle-region overlap factor $q$.
- **The print:** `q (ISO 9613-2:1996, Table 3, footnote 1)`.
- **The problem:** footnote 1 of ISO 9613-2:1996, Table 3 is about which ground
  factor and which height each outer region takes ("For calculating $A_s$, take
  $G = G_s$ and $h = h_s$..."). It says nothing about $q$. The factor $q$ is
  defined by footnote 2 of the same table, which is where the guideline itself
  sends the reader in the four other places it prints the row: Table 3 (T01),
  Table 8 (T04), Table 14 (T06) and Table 22 (T09) all read "Table 3
  footnote 2". Table 20 is the single occurrence that reads footnote 1, and the
  value it carries, $q = 0.23$, is the one footnote 2 produces.
- **Evidence:** the row was read on PDF page 23 (printed p. 17) of
  ISO/TR 17534-3:2015, and the four consistent occurrences of the same row on
  PDF pages 13, 16, 20 and 41 (printed pp. 7, 10, 14 and 35) of the same
  edition; the two footnotes it points at were read on PDF page 10 (printed
  p. 8) of ISO 9613-2:1996.
- **Library behaviour:** unaffected. The typographical slip is in a
  cross-reference, not in a number, and
  [`ground_attenuation`](https://github.com/jmrplens/phonometry/blob/main/src/phonometry/environment/propagation/outdoor_propagation.py)
  implements $q$ from footnote 2, which is what reproduces the printed 0.23.
- **Status:** unreported.

## ISO/TR 17534-3:2015, Table 69 (the worked TRC form answers "yes" for a result below its lower limit)

- **Location:** Table 69, "Example of a TRC-form based on test case 1", the
  row of test case T01 at 250 Hz.
- **The print:** upper limit 31,15, lower limit 31,05, software calculation
  result (exemplary) 31,0, and "yes" in the column "Result inside
  tolerances".
- **The problem:** 31.0 dB lies 0.05 dB below the lower limit 31.05 dB, so
  the row answers "yes" for a result outside its interval. The interval itself
  is right: Table 4, the spectral step-by-step results of T01, certifies
  $L_A = 31.10$ dB at 250 Hz, and 31.05 to 31.15 is that result ±0.05 dB.
  Every other row of the form carries its certified result to one decimal,
  and each of them is inside: seven rounded, among them 13.70 as 13.7,
  23.76 as 23.8 and the total 44.29 as 44.3, and the 1 000 Hz row cut
  down, 38.95 printed as 38.9 on its lower limit of 38.90, where rounding
  gives 39.0. Rounded or cut,
  31.10 to one decimal is 31.1, and the exemplary result was most likely
  meant to read 31.1.
- **Evidence:** read on PDF page 59 (printed p. 53) of ISO/TR 17534-3:2015,
  first edition, with Table 4 on PDF page 14 (printed p. 8) of the same
  edition.
- **Library behaviour:** unaffected, since the library never reads Table 69.
  Given the nine rows of the form,
  [`verify_calculation_results`](https://github.com/jmrplens/phonometry/blob/main/src/phonometry/environment/propagation/software_quality.py)
  answers "no" for the 250 Hz row alone, which
  `test_table_69_of_iso_tr_17534_3_fails_only_at_250_hz` pins.
- **Status:** unreported.
