# Errata in ISO 17208

> One page of the phonometry documentation, as Markdown. Index: https://docs.jmrp.io/phonometry/llms.txt

Canonical: https://docs.jmrp.io/phonometry/reference/errata/iso-17208/
Language: en
Alternate: https://docs.jmrp.io/phonometry/es/reference/errata/iso-17208/index.md
Version: phonometry 4.0.0
Install: pip install "phonometry[full]"
Author: José Manuel Requena Plens (https://orcid.org/0000-0003-1250-6212)
Published: 2026-10-28
Updated: 2026-10-28T03:12:25Z
License: MIT (https://github.com/jmrplens/phonometry/blob/main/LICENSE)
Summary: Errata in ISO 17208: 1 defect in the printed text, with the evidence and what phonometry does about it.

---

This is the entry of the [errata registry](https://docs.jmrp.io/phonometry/reference/errata/) on ISO 17208-2:2019. The registry's introduction says how each claim is checked against the printed page and what the status of an entry means.

## ISO 17208-2:2019, Clause 5 uncertainty band coverage

- **Location:** Clause 5 (representative expanded uncertainties), printed p.
  4.
- **The print:** "5 dB for the low frequency (10 Hz to 100 Hz) bands, 3 dB for
  the mid frequency (125 Hz to 16 000 Hz) bands, and 4 dB for the high
  frequency (**>20 000 Hz**) bands".
- **The problem:** the 20 kHz one-third-octave band itself is left unassigned:
  the mid range ends at 16 kHz *inclusive* and the high range starts strictly
  above 20 kHz. ISO 17208-1:2016, from which clause 5 says the values are
  taken, prints the same three ranges with "**≥20 000 Hz**", which closes the
  gap; Part 2 degraded the $\ge$ to a $>$. The 20 kHz band is not a corner
  case for this document: ISO 17208-1 Table 1 requires the measurement to
  cover "20 000 Hz (minimum)" as its upper one-third-octave band. An earlier
  revision of this entry said "nothing covers 16 kHz to 20 kHz inclusive",
  which is wrong at the lower end: 16 kHz is covered.
- **Evidence:** the two clauses side by side. Verified on PDF page 10 (printed
  p. 4) of ISO 17208-2:2019 and PDF page 22 (printed p. 16) of ISO
  17208-1:2016.
- **Library behaviour:** applies the conservative 4 dB high-band value from
  the 20 kHz band upwards, following Part 1, with the gap documented.
- **Status:** unreported.
