# Errata in EN 61043

> One page of the phonometry documentation, as Markdown. Index: https://docs.jmrp.io/phonometry/llms.txt

Canonical: https://docs.jmrp.io/phonometry/reference/errata/en-61043/
Language: en
Alternate: https://docs.jmrp.io/phonometry/es/reference/errata/en-61043/index.md
Version: phonometry 4.0.0
Install: pip install "phonometry[full]"
Author: José Manuel Requena Plens (https://orcid.org/0000-0003-1250-6212)
Published: 2026-10-28
Updated: 2026-11-16T21:36:14Z
License: MIT (https://github.com/jmrplens/phonometry/blob/main/LICENSE)
Summary: Errata in EN 61043: 1 defect in the printed text, with the evidence and what phonometry does about it.

---

This is the entry of the [errata registry](https://docs.jmrp.io/phonometry/reference/errata/) on UNE-EN 61043:1999. The registry's introduction says how each claim is checked against the printed page and what the status of an entry means.

## UNE-EN 61043:1999, clause 6.1 (class 2 frequency range dropped in translation)

- **Location:** clause 6.1 "Rango de frecuencias", the class 2 sentence, of
  UNE-EN 61043 (April 1999), which declares itself "la versión oficial, en
  español, de la Norma Europea EN 61043 de enero 1994, que a su vez adopta la
  Norma Internacional CEI 61043:1993".
- **The print:** a single sentence, "Los procesadores de clase 2 deberán
  cubrir, al menos, el rango desde 45 Hz a 5,6 kHz en bandas de octava."
- **The problem:** the EN/IEC text gives class 2 processors two alternative
  ranges, not one: "Class 2 processors shall, at least, cover the range from
  45 Hz to 7,1 kHz in one-third octave bands, **or** the range from 45 Hz to
  5,6 kHz in one octave bands" (BS EN 61043:1994, clause 6.1). The translation
  drops the first alternative. The omission is normative rather than
  editorial: it removes one of the two ways clause 6.1 can be satisfied, and a
  reader of the Spanish text alone would conclude that class 2 is *defined*
  over octave bands, so that a one-third-octave chain verified over the 22
  tabulated bands from 50 Hz to $6.3\ \text{kHz}$ could not attest class 2
  over its full range.
- **Evidence:** side-by-side reading of clause 6.1 in both prints. The class 1
  sentence is word-for-word equivalent in the two documents, so the divergence
  is confined to the class 2 sentence. The Spanish print also contradicts
  itself: its Table 2 tabulates the pressure-residual intensity index for
  class 2 processors at all 22 one-third-octave centres, and its faithfully
  translated Note 2 ("Para procesadores con análisis en bandas de octavas
  únicamente, los requisitos se aplican únicamente a las frecuencias centrales
  de las bandas de octava") carves out octave-only processors as a special
  case. Both are redundant if every class 2 processor is an octave-band one.
- **Library behaviour:** implements the EN/IEC reading.
  [`verify_intensity_class`](https://github.com/jmrplens/phonometry/blob/main/src/phonometry/emission/intensity_compliance.py)
  treats the full 22-band one-third-octave set as attesting either class, and
  the 7-band octave set (63 Hz to 4 kHz) as a class 2 alternative that never
  attests class 1, with both branches pinned by regression tests
  ([`tests/emission/test_intensity_compliance.py`](https://github.com/jmrplens/phonometry/blob/main/tests/emission/test_intensity_compliance.py)).
- **Status:** unreported (national translation, not the issuing body's text).
