# Catalogue of resilient layers

> One page of the phonometry documentation, as Markdown. Index: https://docs.jmrp.io/phonometry/llms.txt

Canonical: https://docs.jmrp.io/phonometry/reference/catalogues/resilient-layers/
Language: en
Alternate: https://docs.jmrp.io/phonometry/es/reference/catalogues/resilient-layers/index.md
Version: phonometry 4.0.0
Install: pip install "phonometry[full]"
Author: José Manuel Requena Plens (https://orcid.org/0000-0003-1250-6212)
Published: 2026-10-28
Updated: 2026-11-16T21:36:14Z
Summary: Fifteen resilient layers a floating floor is laid on, each with the dynamic stiffness per unit area measured on it, its density and its thickness.

---

Fifteen resilient layers, which is what a floating floor floats on, each with
the dynamic stiffness per unit area measured on it to ISO 9052-1. It is a thin
table with little to interpret: a stiffness, a density and a thickness, and the
last two are here because four rock wool rows and four glass wool rows differ
by nothing else.

The stiffness is the one the table's heading prints, $s'$, the stiffness of
the installed layer that a floor's natural frequency takes, and not the
apparent $s'_\mathrm{t}$ of the test specimen, which for a porous layer leaves
out the air in its pores.

What a row is not is a product. A floating floor is designed with the stiffness
its manufacturer declares for the material actually being laid; these are
specimens somebody measured and published in an appendix, and they are the
order of magnitude for when there is no declared value in front of you, or the
way to see how far the stiffness moves when the same wool is laid at twice the
density. Eleven are the author's own measurements and the four rebond foams are
credited to a paper of his own.

Each value is the number its page prints, unless a word in brackets after it says what else it is:

- **carried**: the page gives this value on another of its rows

A note mark after a name or a value points to the note the page makes about that row or cell, listed under the table.

| Material | Dynamic stiffness per unit area (MN/m³) | Density (kg/m³) | Thickness (mm) | Source |
| --- | --- | --- | --- | --- |
| Closed-cell polyethylene foam | 115 | 45 | 5 | Hopkins (2007) Table A3, PDF page 637 (printed p. 610) |
| Expanded polystyrene | 78 | 14 | 50 | Hopkins (2007) Table A3, PDF page 637 (printed p. 610) |
| Expanded polystyrene, pre-compressed | 68 | 10 | 50 | Hopkins (2007) Table A3, PDF page 637 (printed p. 610) |
| Mineral wool, rock | 10 | 60 | 30 | Hopkins (2007) Table A3, PDF page 637 (printed p. 610) |
| Mineral wool, rock | 11 | 80 | 30 | Hopkins (2007) Table A3, PDF page 637 (printed p. 610) |
| Mineral wool, rock | 14 | 100 | 30 | Hopkins (2007) Table A3, PDF page 637 (printed p. 610) |
| Mineral wool, rock | 19 | 140 | 30 | Hopkins (2007) Table A3, PDF page 637 (printed p. 610) |
| Mineral wool, glass | 28 | 36 | 13 | Hopkins (2007) Table A3, PDF page 637 (printed p. 610) |
| Mineral wool, glass | 11 | 36 (carried)[^resilientLayers-1] | 25 | Hopkins (2007) Table A3, PDF page 637 (printed p. 610) |
| Mineral wool, glass | 12 | 75 | 25 | Hopkins (2007) Table A3, PDF page 637 (printed p. 610) |
| Mineral wool, glass | 7 | 75 (carried)[^resilientLayers-2] | 40 | Hopkins (2007) Table A3, PDF page 637 (printed p. 610) |
| Rebond foam (reconstituted open cell foam) | 12 | 64 (carried)[^resilientLayers-3] | 15 | Hopkins (2007) Table A3, PDF page 637 (printed p. 610) |
| Rebond foam (reconstituted open cell foam) | 9 | 64 | 20 | Hopkins (2007) Table A3, PDF page 637 (printed p. 610) |
| Rebond foam (reconstituted open cell foam) | 7 | 64 (carried)[^resilientLayers-4] | 25 | Hopkins (2007) Table A3, PDF page 637 (printed p. 610) |
| Rebond foam (reconstituted open cell foam) | 16 | 96 | 15 | Hopkins (2007) Table A3, PDF page 637 (printed p. 610) |

[^resilientLayers-1]: carried down the blank cell of Table A3 from the 13 mm glass-wool row above it, which prints 36 kg/m3 once for the two rows of its block
[^resilientLayers-2]: carried down the blank cell of Table A3 from the 25 mm glass-wool row above it, which prints 75 kg/m3 once for the two rows of its block
[^resilientLayers-3]: carried up the blank cell of Table A3 from the 20 mm rebond-foam row below it, which prints 64 kg/m3 once, level with the middle of the three rows of its block
[^resilientLayers-4]: carried down the blank cell of Table A3 from the 20 mm rebond-foam row above it, which prints 64 kg/m3 once, level with the middle of the three rows of its block

## References

- **Hopkins, C. (2007).** *Sound insulation*. Butterworth-Heinemann. https://doi.org/10.4324/9780080550473
  Table A3: the source of the rows of the catalogue of resilient layers that cite it.
